Puducherry SOR 2024-25
Wood and PVC Work rates
493 wood and pvc work items from the Puducherry PWD, effective 2024-08-14.
Wood and PVC Work rates in the Puducherry Puducherry Schedule of Rates 2024-25 run from ₹16.10 to ₹6,64,052.22. Transcribed from Puducherry PWD — Puducherry Schedule of Rates 2024-25, Puducherry region. Base PDF only; PWD has since issued Correction Slip-3 (22 January 2025) for all four regions, so some rates here may be superseded.. Reference only — verify against the official source before pricing a bid.
/
493 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 9.1.1B | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) - Burma teak wood | Cum | 6,64,052.22 |
| 9.1.1F | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) - Forest teak wood | Cum | 2,14,680.00 |
| 9.1.2P | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Padak wood | Cum | 1,96,859.44 |
| 9.1.2V | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Vengai wood | Cum | 1,70,313.06 |
| 9.1.3P | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) - Kiln seasoned and chemically treated Padak wood | Cum | 1,98,180.28 |
| 9.2 | Providing laminated veneer lumber conforming to IS:14616 and TAD -15:2001 (Part B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in Position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) | Cum | 20,596.67 |
| 9.3.1B | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc- Burma teak wood | Cum | 6,48,681.96 |
| 9.3.1F | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc - Forest teak wood | Cum | 2,01,405.19 |
| 9.3.1P | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc- Padak wood | Cum | 1,83,667.97 |
| 9.3.1V | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc- Vengai wood | Cum | 1,57,245.25 |
| 9.3.2P | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc- Kiln seasoned and chemically treated Padak wood | Cum | 1,84,743.04 |
| 9.3.2V | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc- Kiln seasoned and chemically treated Vengai wood | Cum | 1,58,320.25 |
| 9.4.1B | Extra for additional labour for circular works, such as in frames of fan light - Burma teak wood | Cum | 66,405.22 |
| 9.4.1F | Extra for additional labour for circular works, such as in frames of fan light - Forest teak wood | Cum | 21,468.00 |
| 9.4.2P | Extra for additional labour for circular works, such as in frames of fan light - Padak wood | Cum | 19,685.94 |
| 9.4.2V | Extra for additional labour for circular works, such as in frames of fan light - Vengai wood | Cum | 17,031.31 |
| 9.4.3P | Extra for additional labour for circular works, such as in frames of fan light - Kiln seasoned and chemically treated Padak wood | Cum | 19,818.19 |
| 9.4.3V | Extra for additional labour for circular works, such as in frames of fan light - Kiln seasoned and chemically treated Vengai wood | Cum | 17,163.56 |
| 9.5.1.1B | Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Burma teak wood - 35 mm thick shutters | Sqm | 18,560.65 |
| 9.5.1.1F | Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Forest teak wood - 35 mm thick shutters | Sqm | 5,826.76 |
| 9.5.1.1P | Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Padak wood - 35 mm thick shutters | Sqm | 6,447.71 |
| 9.5.1.1V | Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Vengai wood - 35 mm thick shutters | Sqm | 5,735.19 |
| 9.5.1.2B | Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Burma teak wood - 30 mm thick shutters | Sqm | 16,213.50 |
| 9.5.1.2F | Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Forest teak wood - 30 mm thick shutters | Sqm | 5,227.41 |
| 9.5.1.2P | Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Padak wood - 30 mm thick shutters | Sqm | 5,763.13 |
| 9.5.1.2V | Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Vengai wood - 30 mm thick shutters | Sqm | 5,148.42 |
| 9.5.2.1P | Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Kiln seasoned and chemically treated Padak wood - 35 mm thick shutters | Sqm | 6,474.81 |
| 9.5.2.1V | Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Kiln seasoned and chemically treated Vengai wood - 35 mm thick shutters | Sqm | 5,762.29 |
| 9.5.2.2P | Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Kiln seasoned and chemically treated Padak wood - 30 mm thick shutters | Sqm | 5,787.54 |
| 9.5.2.2V | Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Kiln seasoned and chemically treated Vengai wood - 30 mm thick shutters | Sqm | 5,172.84 |
| 9.6.1 | Providing and fixing 35mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15: 2001 (Part B),fixing with butt hinges of required size with necessary screws, all complete as per direction of Engineer-in-charge and panelling with panels of - (Note: Butthinges and necessary screws shall be paid separately) - 12mm thick plain grade -1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT -I, IS:3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 | Sqm | 2,759.06 |
| 9.6.2 | Providing and fixing 35mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15: 2001 (Part B),fixing with butt hinges of required size with necessary screws, all complete as per direction of Engineer-in-charge and panelling with panels of - (Note: Butthinges and necessary screws shall be paid separately) - 12mm thick pre - laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS: 3087, bonded with BWP type synthetic resin adhesive as per IS: 848 and prelaminated conforming to IS: 12823, Grade 1, type - II marked | Sqm | 2,915.55 |
| 9.6.3 | Providing and fixing 35mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15: 2001 (Part B),fixing with butt hinges of required size with necessary screws, all complete as per direction of Engineer-in-charge and panelling with panels of - (Note: Butthinges and necessary screws shall be paid separately) - 12mm thick one side pre - laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS: 3087, bonded with BWP type synthetic resin adhesive as per IS: 848 and prelaminated conforming to IS: 12823, Grade 1, type - II marked | Sqm | 2,844.42 |
| 9.7.1B | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Burma teak wood | Sqm | 15,445.02 |
| 9.7.1F | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Forest teak wood | Sqm | 4,822.11 |
| 9.7.1P | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Padak wood | Sqm | 5,340.12 |
| 9.7.1V | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Vengai wood | Sqm | 4,745.73 |
| 9.7.2P | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Kiln seasoned and chemically treated Padak wood | Sqm | 5,380.91 |
| 9.7.2V | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Kiln seasoned and chemically treated Vengai wood | Sqm | 4,786.55 |
| 9.32B | Providing 50x50x50 mm Burma teak wood plugs including cutting brick work and fixing in cement moratr 1:3 (1 cement: 3 fine aggregate) and making good the walls etc | Each | 111.32 |
| 9.32F | Providing 50x50x50 mm Forest teak wood plugs including cutting brick work and fixing in cement moratr 1:3 (1 cement: 3 fine aggregate) and making good the walls etc | Each | 51.72 |
| 9.32P | Providing 50x50x50 mm Padak wood plugs including cutting brick work and fixing in cement moratr 1:3 (1 cement: 3 fine aggregate) and making good the walls etc | Each | 49.35 |
| 9.32V | Providing 50x50x50 mm Vengai wood plugs including cutting brick work and fixing in cement moratr 1:3 (1 cement: 3 fine aggregate) and making good the walls etc | Each | 45.83 |
| 9.7.3.1 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Ply wood 5 ply, 9mm thick - decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type | Sqm | 2,593.32 |
| 9.7.3.2 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Ply wood 5 ply, 9mm thick - decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR type | Sqm | 2,386.38 |
| 9.7.4.1 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Ply wood 7 ply, 9 mm thick - decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR type | Sqm | 2,472.61 |
| 9.7.5.1 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Particle board 12 mm thick - Plain particle board flat pressed, 3 layer or graded wood particle board medium density grade I, IS:3087 marked | Sqm | 1,789.74 |
| 9.7.5.2 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Particle board 12 mm thick - Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I | Sqm | 1,955.29 |
| 9.7.5.3 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Particle board 12 mm thick - Pre - laminated particle board with decorative lamination on one side and balancing lamination on other side, grade I, type II, IS: 12823 marked | Sqm | 2,007.03 |
| 9.7.5.4 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Particle board 12 mm thick - Pre - laminated particle board with decorative lamination on both sides, grade I, type II, IS:12823 marked | Sqm | 2,050.12 |
| 9.7.6.1 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Coir Veneer board (conforming to IS 14842) - 12mm thick | Sqm | 2,213.94 |
| 9.7.7.1 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Float glass panes - 4mm thick glass pane (weight not less than 10kg/sqm) | Sqm | 2,387.44 |
| 9.7.7.2 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Float glass panes - 5mm thick glass panes (weight not less than 12.50kg / sqm) | Sqm | 2,628.86 |
| 9.7.8 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading | Sqm | 2,115.89 |
| 9.9.1.1B | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. - Burma teak wood - 35 mm thick | Sqm | 21,469.37 |
| 9.9.1.1F | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. - Forest teak wood - 35 mm thick | Sqm | 6,987.70 |
| 9.9.1.1P | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. - Padak wood - 35 mm thick | Sqm | 7,693.88 |
| 9.9.1.1V | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. -Vengai wood - 35 mm thick | Sqm | 6,883.56 |
| 9.9.1.2B | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. -Baruma teak wood - 30 mm thick | Sqm | 18,786.93 |
| 9.9.1.2F | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. -Forest teak wood - 30 mm thick | Sqm | 6,302.72 |
| 9.9.1.2P | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. - 30 mm thick | Sqm | 6,911.50 |
| 9.9.1.2V | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. -Vengai wood - 30 mm thick | Sqm | 6,212.95 |
| 9.9.2.1P | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. -Kiln seasoned and chemically treated Padak wood - 35mm thick | Sqm | 7,723.65 |
| 9.9.2.1V | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. -Kiln seasoned and chemically treated Vengai wood - 35mm thick | Sqm | 6,913.34 |
| 9.9.2.2P | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. -Kiln seasoned and chemically treated Padak wood - 30mm thick | Sqm | 6,938.21 |
| 9.9.2.2V | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. - 30mm thick | Sqm | 6,239.68 |
| 9.10.1 | Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B), using 4mm thick float glass panes for doors, windows and clerestory windows, with butt hinges of required size with necessary screws all as per direction (Note: Butt hinges and necessary screws shall be paid separately) - 30 mm thick shutters | Sqm | 2,446.08 |
| 9.11.1 | Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be meaured) -5 mm thick (weight not less than 12.50 kg per sqm) instead of 4 mm thick (weight not less than 10 kg per sqm) | Sqm | 199.17 |
| 9.12 | Extar for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) | Sqm | 99.59 |
| 9.13 | Deduct for providing pin headed glass panes 4mm thick instead of ordinary float glass panes 4mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters (Area of opening for glass panes excluding portion inside rebate shall be measured) | Sqm | 120.93 |
| 9.14 | Extra for providing ISI marked Stainless steel butt hinges instead of M.S.pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured) | Sqm | 104.14 |
| 9.15.1.1 | Deduct for not providing hinges in doors, windows or clearestory window shutter with - ISI marked Stainless steel butt hinges with stainless steel screws - For teak wood and other wood shutters | Sqm | 176.12 |
| 9.15.2.1 | Deduct for not providing hinges in doors, windows and clearestory window shutter with - ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws - for teak wood and other class of wood shutters | Sqm | 71.98 |
| 9.16.1.1B | Providing and fixing 25 mm thick shutters for cup board etc - panelled or panelled & glazed shutters - Burma teak wood including ISI marked anodised aluminium butt hinges with necessary screws | Sqm | 15,898.51 |
| 9.16.1.1F | Providing and fixing 25 mm thick shutters for cup board etc - panelled or panelled & glazed shutters - Forest teak wood including ISI marked anodised aluminium butt hinges with necessary screws | Sqm | 5,911.15 |
| 9.16.1.1P | Providing and fixing 25 mm thick shutters for cup board etc - panelled or panelled & glazed shutters - Padak wood including ISI marked anodised aluminium butt hinges with necessary screws | Sqm | 6,398.17 |
| 9.16.1.1V | Providing and fixing 25 mm thick shutters for cup board etc - panelled or panelled & glazed shutters -Vengai wood including ISI marked anodised aluminium butt hinges with necessary screws | Sqm | 5,839.34 |
| 9.16.1.2B | Providing and fixing 25 mm thick shutters for cup board etc - panelled or panelled & glazed shutters - Burma teak wood including ISI marked nickel plated bright finished M.S.piano hinges with necessary screws | Sqm | 16,010.21 |
| 9.16.1.2F | Providing and fixing 25 mm thick shutters for cup board etc - panelled or panelled & glazed shutters - Forest teak wood including ISI marked nickel plated bright finished M.S.piano hinges with necessary screws | Sqm | 6,022.87 |
| 9.16.1.2P | Providing and fixing 25 mm thick shutters for cup board etc - panelled or panelled & glazed shutters - Padak wood including ISI marked nickel plated bright finished M.S.piano hinges with necessary screws | Sqm | 6,509.88 |
| 9.16.1.2V | Providing and fixing 25 mm thick shutters for cup board etc - panelled or panelled & glazed shutters - Vengai wood including ISI marked nickel plated bright finished M.S.piano hinges with necessary screws | Sqm | 5,951.04 |
| 9.16.2.1B | Providing and fixing 25 mm thick shutters for cup board etc - Glazed shutters - Burma teak wood including ISI marked anodised aluminium butt hinges with necessary screws | Sqm | 16,478.30 |
| 9.16.2.1F | Providing and fixing 25 mm thick shutters for cup board etc - Glazed shutters - Forest teak wood including ISI marked anodised aluminium butt hinges with necessary screws | Sqm | 5,741.89 |
| 9.16.2.1P | Providing and fixing 25 mm thick shutters for cup board etc - Glazed shutters - Padak wood including ISI marked anodised aluminium butt hinges with necessary screws | Sqm | 6,265.44 |
| 9.16.2.1V | Providing and fixing 25 mm thick shutters for cup board etc - Glazed shutters - Vengai wood including ISI marked anodised aluminium butt hinges with necessary screws | Sqm | 5,664.69 |
| 9.16.2.2B | Providing and fixing 25 mm thick shutters for cup board etc - Glazed shutters - Burma teak wood including ISI marked nickel plated bright finished M.S.piano hinges with necessary screws | Sqm | 16,473.50 |
| 9.16.2.2F | Providing and fixing 25 mm thick shutters for cup board etc - Glazed shutters - Forest teak wood including ISI marked nickel plated bright finished M.S.piano hinges with necessary screws | Sqm | 5,737.10 |
| 9.16.2.2P | Providing and fixing 25 mm thick shutters for cup board etc - Glazed shutters - Padak wood including ISI marked nickel plated bright finished M.S.piano hinges with necessary screws | Sqm | 6,260.65 |
| 9.16.2.2V | Providing and fixing 25 mm thick shutters for cup board etc - Glazed shutters - Vengai wood including ISI marked nickel plated bright finished M.S.piano hinges with necessary screws | Sqm | 5,659.89 |
| 9.17.1 | Providing and fixing flat Pressed 3 layer particle or graded plain wood board medium density exterior grade (Grade I) FPT-I, conforming and marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) - 12mm thick | Sqm | 834.50 |
| 9.17.2 | Providing and fixing flat Pressed 3 layer particle or graded plain wood board medium density exterior grade (Grade I) FPT-I, conforming and marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) - 18mm thick | Sqm | 843.46 |
| 9.18.1 | Providing and fixing Pre - laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked, with one side decorative and other side balancing lamination Grade 1, Type II exterior grade IS: 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) - 18mm thick | Sqm | 1,193.28 |
| 9.18.2 | Providing and fixing Pre - laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked, with one side decorative and other side balancing lamination Grade 1, Type II exterior grade IS: 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) - 25mm thick | Sqm | 1,533.85 |
| 9.20.1 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 2,837.17 |
| 9.20.2 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 2,552.64 |
| 9.20.3 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S.Piano hinges IS: 3818 marked with necessary screws | Sqm | 2,456.08 |
| 9.21.1 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non - decorative type, core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 2,327.87 |
| 9.21.2 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non - decorative type, core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 2,255.32 |
| 9.21.3 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non - decorative type, core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S.piano hinges with necessary screws | Sqm | 2,093.31 |
| 9.22.1 | Extra for providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS 2202 (part1) - on one side only | Sqm | 614.59 |
| 9.23 | Extra for providing lipping with teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) | Sqm | 183.52 |
| 9.24.1 | Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) - Rectangular or square | Sqm | 183.52 |
| 9.24.2 | Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) - Circular | Sqm | 183.52 |
| 9.25.1 | Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured) - Decorative type door | Sqm | 320.10 |
| 9.26 | Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured) | Sqm | 76.82 |
| 9.27.1.1.1B | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 35mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - Burma teak wood | Sqm | 19,383.49 |
| 9.27.1.1.1F | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 35mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - 35mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - Forest teak wood | Sqm | 6,549.74 |
| 9.27.1.1.1P | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 35mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - Padak wood | Sqm | 7,175.55 |
| 9.27.1.1.1V | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 35mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - Vengai wood | Sqm | 6,457.44 |
| 9.27.1.1.2P | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 35mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - Kiln seasoned and chemically treated padak wood | Sqm | 7,202.69 |
| 9.27.1.1.2V | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 35mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - Kiln seasoned and chemically treated vengai wood | Sqm | 6,484.58 |
| 9.27.1.2.1B | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 35mm thick shutters - with ISI marked Stainless steel butt hinges of required size - Burma teak wood | Sqm | 19,487.63 |
| 9.27.1.2.1F | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 35mm thick shutters - with ISI marked Stainless steel butt hinges of required size - Forest teak wood | Sqm | 6,653.88 |
| 9.27.1.2.1P | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 35mm thick shutters - with ISI marked Stainless steel butt hinges of required size - Padak wood | Sqm | 7,279.69 |
| 9.27.1.2.1V | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 35mm thick shutters - with ISI marked Stainless steel butt hinges of required size - Vengai wood | Sqm | 6,561.59 |
| 9.27.1.2.2P | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 35mm thick shutters - with ISI marked Stainless steel butt hinges of required size -Kiln seasoned and chemically treated Padak wood | Sqm | 7,306.82 |
| 9.27.1.2.2V | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 35mm thick shutters - with ISI marked Stainless steel butt hinges of required size -Kiln seasoned and chemically treated Vengai wood | Sqm | 6,588.73 |
| 9.27.2.1.1B | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 30mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - Barma teak wood | Sqm | 16,759.80 |
| 9.27.2.1.1F | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 30mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - 30mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - Forest teak wood | Sqm | 5,773.70 |
| 9.27.2.1.1P | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 30mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - 30mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - Padak wood | Sqm | 6,309.42 |
| 9.27.2.1.1V | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 30mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - 30mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - Vengai wood | Sqm | 5,694.71 |
| 9.27.2.1.2P | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 30mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - 30mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - Kiln seasoned and chemically treated Padak wood | Sqm | 6,332.65 |
| 9.27.2.1.2V | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with ire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 30mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - 30mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - Kiln seasoned and chemically treated Vengai wood | Sqm | 5,717.94 |
| 9.27.2.2.1B | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with wire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 30mm thick shutters - with ISI marked Stainless steel butt hinges of required size - Burma teak wood | Sqm | 16,863.94 |
| 9.27.2.2.1F | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with wire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 30mm thick shutters - with ISI marked Stainless steel butt hinges of required size - Forest teak wood | Sqm | 5,877.84 |
| 9.27.2.2.1P | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with wire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 30mm thick shutters - with ISI marked Stainless steel butt hinges of required size - Padak wood | Sqm | 6,413.56 |
| 9.27.2.2.1V | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with wire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 30mm thick shutters - with ISI marked Stainless steel butt hinges of required size - Vengai wood | Sqm | 5,798.85 |
| 9.27.2.2.2P | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with wire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 30mm thick shutters - with ISI marked Stainless steel butt hinges of required size - Kiln seasoned and chemically treated Padak wood | Sqm | 6,436.79 |
| 9.27.2.2.2V | Providing and fixing wire gauge shutters using galvanized M.S.wire gauge average width of aperture 1.4 mm in both directions with wire of dia 0.63mm, for doors, windows and clerestory windows with hinges and necessary screws - 30mm thick shutters - with ISI marked Stainless steel butt hinges of required size - Kiln seasoned and chemically treated Vengai wood | Sqm | 5,822.08 |
| 9.31.1 | Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS: 14616, and as per TADS 15: 2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS:1568 for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, as per direction of Engineer-in-charges (Note:- Butt hinges and necessary screws shall be paid separately) 35 mm thick shutters | Sqm | 2,502.98 |
| 9.31.2 | Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS: 14616, and as per TADS 15: 2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS:1568 for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, as per direction of Engineer-in-charges (Note:- Butt hinges and necessary screws shall be paid separately) 30 mm thick shutters | Sqm | 2,246.91 |
| 9.33.1 | Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S.screws including drilling holes in masonry work / C.C / R.C.C and making good etc.complete - 25mm long | Each | 16.56 |
| 9.33.2 | Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S.screws including drilling holes in masonry work / C.C / R.C.C and making good etc.complete - 32 mm long | Each | 18.92 |
| 9.33.3 | Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S.screws including drilling holes in masonry work / C.C / R.C.C and making good etc.complete - 40 mm long | Each | 21.77 |
| 9.33.4 | Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S.screws including drilling holes in masonry work / C.C / R.C.C and making good etc.complete - 50 mm long | Each | 24.62 |
| 9.34.1B | Providing and fixing Burma teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface - 40 mm thick | Sqm | 33,028.92 |
| 9.34.1F | Providing and fixing Forest teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface - 40 mm thick | Sqm | 9,298.96 |
| 9.34.2B | Providing and fixing Barma teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface - 25 mm thick | Sqm | 21,078.63 |
| 9.34.2F | Providing and fixing Forest teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface - 25 mm thick | Sqm | 5,919.56 |
| 9.34.3B | Providing and fixing Burma teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface - 20 mm thick | Sqm | 16,984.03 |
| 9.34.3F | Providing and fixing Forest teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface - 20 mm thick | Sqm | 4,791.20 |
| 9.34.4B | Providing and fixing Burma teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface - 12 mm thick | Sqm | 10,610.54 |
| 9.34.4F | Providing and fixing Forest teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface - 12 mm thick | Sqm | 3,163.70 |
| 9.49B | Providing and fixing expanded metal 20 X 60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 X 19 mm beading of Burma teak wood and priming coat with approved steel primer all complete | Sqm | 3,961.53 |
| 9.49F | Providing and fixing expanded metal 20 X 60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 X 19 mm beading of Forest teak wood and priming coat with approved steel primer all complete | Sqm | 1,860.31 |
| 9.50B | Providing and fixing hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62 x19 mm beading of Burma teak wood and priming coat with approved steel primer all complete | Sqm | 4,187.34 |
| 9.50F | Providing and fixing hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62 x19 mm beading of Forest teak wood and priming coat with approved steel primer all complete | Sqm | 2,086.10 |
| 9.35.1 | Providing and fixing in wall lining flat pressed three layer (Medium density) particle board or graded wood Pre - laminated one side decorative lamination and other side balancing lamination grade -1, type -II, IS:12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete - 12 mm thick | Sqm | 1,247.71 |
| 9.35.2 | Providing and fixing in wall lining flat pressed three layer (Medium density) particle board or graded wood Pre - laminated one side decorative lamination and other side balancing lamination grade -1, type -II, IS:12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete - 18 mm thick | Sqm | 1,391.68 |
| 9.35.3 | Providing and fixing in wall lining flat pressed three layer (Medium density) particle board or graded wood Pre - laminated one side decorative lamination and other side balancing lamination grade -1, type -II, IS:12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete - 25 mm thick | Sqm | 1,748.47 |
| 9.36.1P | Providing and fixing specified wood frame work consisting of battens 50x25 mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete - Kiln seasoned and chemically treated Padak wood | Cum | 3,26,065.92 |
| 9.36.1V | Providing and fixing specified wood frame work consisting of battens 50x25 mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete - Kiln seasoned and chemically treated Vengai wood | Cum | 2,94,199.04 |
| 9.37.1 | Providing and fixing plywood 4mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with - Decorative veneer facings of approved manufacture | Sqm | 2,148.79 |
| 9.38 | Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete | Sqm | 1,882.47 |
| 9.39.1 | Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) grade 1, type II, IS: 12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete - 18 mm thick | Sqm | 1,688.31 |
| 9.39.2 | Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) grade 1, type II, IS: 12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete - 25 mm thick | Sqm | 2,045.10 |
| 9.40.1.1B | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete - Burma teak wood - 50 x 12 mm | Metre | 632.25 |
| 9.40.1.1F | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete- Forest teak wood - 50 x 12 mm | Metre | 276.30 |
| 9.40.1.2B | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete- Burma teak wood - 50 x 20 mm | Metre | 952.08 |
| 9.40.1.2F | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete- Forest teak wood - 50 x 20 mm | Metre | 358.83 |
| 9.40.2.1P | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete - Kiln seasoned and chemically treated Padak wood - 50 x 12 mm | Metre | 294.20 |
| 9.40.2.1V | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete - Kiln seasoned and chemically treated Vengai wood - 50 x 12 mm | Metre | 274.29 |
| 9.40.2.2P | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete - Kiln seasoned and chemically treated Padak wood - 50 x 20 mm | Metre | 388.67 |
| 9.40.2.2V | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete - Kiln seasoned and chemically treated Vengai wood - 50 x 20 mm | Metre | 355.47 |
| 9.41.1B | Providing and fixing plain jaffri of 35 X 10 mm laths placed 35 mm apart (frames to be paid separately), including fixing 50 X 12 mm beading complete with - Burma teak wood | Sqm | 11,831.51 |
| 9.41.1F | Providing and fixing plain jaffri of 35 X 10 mm laths placed 35 mm apart (frames to be paid separately), including fixing 50 X 12 mm beading complete with - Forest teak wood | Sqm | 3,986.89 |
| 9.42P | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade 1, ISI marked and conforming to IS: 3087 marked, including top cover of 6mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S.pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets, including fixing with 25 x 3 mm M.S.flat 10 cm long fixed to pelmet with Padak wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75mm long etc.all complete | Metre | 861.85 |
| 9.42V | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade 1, ISI marked and conforming to IS: 3087 marked, including top cover of 6mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S.pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets, including fixing with 25 x 3 mm M.S.flat 10 cm long fixed to pelmet with Vengai wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75mm long etc.all complete | Metre | 813.57 |
| 9.43P | Providing and fixing 18 mm thick, 150mm wide pelmet of coir Veneer board ISI marked IS: 14842, including top cover of 6mm coir veneer board, nickle plated M.S.Pipe 20mm dia (heavy type) curtain rod with nickel plated brackets, including fixing with 25 X 3 mm M.S. flat 10 cm long fixed to pelmet with Padak wood cleats of size 100 mm X 40 mm X 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc, all complete | Metre | 992.09 |
| 9.43V | Providing and fixing 18 mm thick, 150mm wide pelmet of coir Veneer board ISI marked IS: 14842, including top cover of 6mm coir veneer board, nickle plated M.S.Pipe 20mm dia (heavy type) curtain rod with nickel plated brackets, including fixing with 25 X 3 mm M.S. flat 10 cm long fixed to pelmet with Vengai wood cleats of size 100 mm X 40 mm X 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc, all complete | Metre | 943.81 |
| 9.44.1 | Extra for using veneered particle board conforming to IS: 3097 Grade 1, in item of pelmet 18mm thick 150 mm wide - Non Decorative veneer on both sides | Metre | 42.11 |
| 9.44.2 | Extra for using veneered particle board conforming to IS: 3097 Grade 1, in item of pelmet 18mm thick 150 mm wide - Particle board with decorative veneer on both sides | Metre | 125.20 |
| 9.45 | Providing and fixing teak wood lipping of size 25 X3 mm in pelmet | Metre | 77.89 |
| 9.46.1 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm, with two chromium plated brass brackets fixed with C.P.brass screws and PVC sleeves etc.,wherever necessary complete - 12mm dia | Metre | 316.52 |
| 9.46.2 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm, with two chromium plated brass brackets fixed with C.P.brass screws and PVC sleeves etc.,wherever necessary complete - 20mm dia | Metre | 423.22 |
| 9.46.3 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm, with two chromium plated brass brackets fixed with C.P.brass screws and PVC sleeves etc.,wherever necessary complete - 25mm dia | Metre | 562.63 |
| 9.47.1 | Providing and fixing nickel plated M.S.pipe curtain rods with nickel plated brackets - 20 mm dia (heavy type) | Metre | 147.75 |
| 9.47.2 | Providing and fixing nickel plated M.S.pipe curtain rods with nickel plated brackets - 25 mm dia (heavy type) | Metre | 156.28 |
| 9.48.1 | Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete - Fixed to steel windows by welding | KG | 221.54 |
| 9.48.2 | Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete - Fixed to openings / wooden frames with rawl plugs screws etc | KG | 233.28 |
| 9.51.1B | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia 0.63 mm all complete - with Burma teak wood beading 62 X 19 mm | Sqm | 3,582.12 |
| 9.51.1F | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia 0.63 mm all complete - with Forest teak wood beading 62 X 19 mm | Sqm | 1,480.88 |
| 9.52 | Deduct for fixing 75 X 25 mm hard drawn steel wire fabric of weight not less than 7.75 kg per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick (weight not less than 10kg /sqm) | Sqm | 170.72 |
| 9.53 | Providing 40 X 5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 300 x100 x 150 mm 1:3:6 mix (1 cement: 3 fine aggregate: 6 graded stone aggregate 20mm nominal size) | Each | 214.12 |
| 9.54.1P | Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces etc. Complete with - padak wood | Cum | 1,79,970.30 |
| 9.54.1V | Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces etc. Complete with - Vengai wood | Cum | 1,54,325.42 |
| 9.54.2B | Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces etc. Complete with - Burma teak wood | Cum | 6,31,295.17 |
| 9.54.2F | Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces etc. Complete with - Forest teak wood | Cum | 1,97,185.37 |
| 9.55.1 | Providing and fixing ISI marked IS: 1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete - 125 X 65 X 2.12 mm | Each | 55.41 |
| 9.55.2 | Providing and fixing ISI marked IS: 1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete - 100 X 58 x 1.90 mm | Each | 48.44 |
| 9.55.3 | Providing and fixing ISI marked IS: 1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete - 75 x 47 x 1.70 mm | Each | 40.30 |
| 9.55.4 | Providing and fixing ISI marked IS: 1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete - 50X37X1.50 mm | Each | 18.12 |
| 9.56.1 | Providing and fixing ISI marked IS: 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc.complete - 125 X 90 X 4.00 mm | Each | 78.89 |
| 9.56.2 | Providing and fixing ISI marked IS: 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc.complete - 100 X 75 X 3.50 mm | Each | 55.27 |
| 9.56.3 | Providing and fixing ISI marked IS: 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc.complete - 75 X 60 X 3.10 mm | Each | 40.87 |
| 9.56.4 | Providing and fixing ISI marked IS: 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc.complete - 50 X 40X 2.50 mm | Each | 19.55 |
| 9.57.1 | Providing and fixing ISI marked IS:1341 oxidised M.S pressed butt hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) - 125 X 65 X 2.12 mm | Each | 65.85 |
| 9.57.1R | Providing and fixing ISI marked powder coating pressed butt hinges with necessary screws etc. complete - 125 X 65 X 2.12 mm | Each | 85.66 |
| 9.57.2 | Providing and fixing ISI marked IS:1341 oxidised M.S pressed butt hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) - 100 X 58 X 1.90 mm | Each | 55.04 |
| 9.57.2R | Providing and fixing ISI marked powder coating pressed butt hinges with necessary screws etc. complete - 100 X 58 X 1.90 mm | Each | 66.51 |
| 9.57.3 | Providing and fixing ISI marked IS:1341 oxidised M.S pressed butt hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) - 75 X 47 X 1.70 mm | Each | 44.37 |
| 9.57.4 | Providing and fixing ISI marked IS:1341 oxidised M.S pressed butt hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) - 50X37X1.50mm | Each | 21.40 |
| 9.57.4R | Providing and fixing ISI marked powder coating pressed butt hinges with necessary screws etc. complete - 50X37X1.50mm | Each | 24.10 |
| 9.58.1 | Providing and fixing ISI marked IS: 1341 oxidised M.S.pressed Parliamentary hinges with necessary screws etc, complete (Copper oxidised as per IS 1378) - 150X 125X 27X 2.80mm | Each | 100.21 |
| 9.58.1R | Providing and fixing ISI marked powder coating pressed Parliamentary hinges with necessary screws etc, complete - 150X 125X 27X 2.80mm | Each | 233.31 |
| 9.58.2 | Providing and fixing ISI marked IS: 1341 oxidised M.S.pressed Parliamentary hinges with necessary screws etc, complete (Copper oxidised as per IS 1378) - 125 X 125 X 27 X 2.80 mm | Each | 85.70 |
| 9.58.2R | Providing and fixing ISI marked powder coating Parliamentary hinges with necessary screws etc, complete - 125 X 125 X 27 X 2.80 mm | Each | 200.17 |
| 9.58.3 | Providing and fixing ISI marked IS: 1341 oxidised M.S.pressed Parliamentary hinges with necessary screws etc, complete (Copper oxidised as per IS 1378) - 100 X 125 X 27 X 2.80 mm | Each | 83.99 |
| 9.58.3R | Providing and fixing ISI marked powder coating pressed Parliamentary hinges with necessary screws etc, complete - 100 X 125 X 27 X 2.80 mm | Each | 170.01 |
| 9.58.4 | Providing and fixing ISI marked IS: 1341 oxidised M.S.pressed Parliamentary hinges with necessary screws etc, complete (Copper oxidised as per IS 1378) - 75 X 100 X 20 X 2.24 mm | Each | 73.89 |
| 9.58.4R | Providing and fixing ISI marked powder coating pressed Parliamentary hinges with necessary screws etc, complete - 75 X 100 X 20 X 2.24 mm | Each | 132.19 |
| 9.59.1 | Providing and fixing ISI marked oxidised M.S.single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS1378)- 150 mm | Each | 199.79 |
| 9.59.1R | Providing and fixing ISI marked powder coating single acting spring hinges with necessary screws etc. complete - 150 mm | Each | 409.09 |
| 9.59.2 | Providing and fixing ISI marked oxidised M.S.single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS1378) - 125 mm | Each | 192.68 |
| 9.59.2R | Providing and fixing ISI marked powder coating single acting spring hinges with necessary screws etc. complete - 125 mm | Each | 357.88 |
| 9.59.3 | Providing and fixing ISI marked oxidised M.S.single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS1378) - 100 mm | Each | 151.71 |
| 9.59.3R | Providing and fixing ISI marked powder coating single acting spring hinges with necessary screws etc. complete - 100 mm | Each | 284.24 |
| 9.60.1 | Providing and fixing ISI marked IS:453 oxidised M.S.double acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) - 150mm | Each | 206.91 |
| 9.60.1R | Providing and fixing powder coating.double acting spring hinges with necessary screws etc. complete - 150mm | Each | 396.29 |
| 9.60.2 | Providing and fixing ISI marked IS:453 oxidised M.S.double acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) -125 mm | Each | 195.53 |
| 9.60.2R | Providing and fixing powder coating double acting spring hinges with necessary screws etc. complete - 125 mm | Each | 353.61 |
| 9.60.3 | Providing and fixing ISI marked IS:453 oxidised M.S.double acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) -100 mm | Each | 151.71 |
| 9.60.3R | Providing and fixing powder coating.double acting spring hinges with necessary screws etc. complete - 100 mm | Each | 278.55 |
| 9.61.1 | Providing M.S.Piano hinges ISI marked IS: 3818 finished with nickel Chromium plating grade I as per IS: 1068 and fixing with necessary screws etc.complete - Overall width 35 mm | Metre | 327.62 |
| 9.61.2 | Providing M.S.Piano hinges ISI marked IS: 3818 finished with nickel Chromium plating grade I as per IS: 1068 and fixing with necessary screws etc.complete - - Overall width 50 mm | Metre | 323.36 |
| 9.61.3 | Providing M.S.Piano hinges ISI marked IS: 3818 finished with nickel Chromium plating grade I as per IS: 1068 and fixing with necessary screws etc.complete - - Overall width 65 mm | Metre | 334.74 |
| 9.62.1 | Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc.complte (Copper oxidised as per IS 1378) - 300 X 16 mm | Each | 188.36 |
| 9.62.1R | Providing and fixing ISI marked powder coating sliding door bolts with nuts and screws etc.complte - 300 X 16 mm | Each | 298.53 |
| 9.62.2 | Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc.complte (Copper oxidised as per IS 1378) - 250 X 16 mm | Each | 157.06 |
| 9.62.2R | Providing and fixing ISI marked powder coating sliding door bolts with nuts and screws etc.complte - 250 X 16 mm | Each | 265.32 |
| 9.63.1 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish (Barrel type) with necessary screws etc.complete (Copper oxidised as per IS 1378) - 250 x10 mm | Each | 84.51 |
| 9.63.1R | Providing and fixing ISI marked powder coating tower bolt black finish (Barrel type) with necessary screws etc.complete - 250 x10 mm | Each | 100.58 |
| 9.63.2 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish (Barrel type) with necessary screws etc.complete (Copper oxidised as per IS 1378) - 200 x10 mm | Each | 64.76 |
| 9.63.2R | Providing and fixing ISI marked powder coating tower bolt black finish (Barrel type) with necessary screws etc.complete - 200 x10 mm | Each | 82.74 |
| 9.63.3 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish (Barrel type) with necessary screws etc.complete (Copper oxidised as per IS 1378) - 150x10mm | Each | 56.39 |
| 9.63.3R | Providing and fixing ISI marked powder coating tower bolt black finish (Barrel type) with necessary screws etc.complete - 150x10mm | Each | 69.17 |
| 9.63.4 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish (Barrel type) with necessary screws etc.complete (Copper oxidised as per IS 1378) - 100x10mm | Each | 42.74 |
| 9.63.4R | Providing and fixing ISI marked powder coating tower bolt black finish (Barrel type) with necessary screws etc.complete - 100x10mm | Each | 64.05 |
| 9.64 | Providing and fixing ISI marked 85 x 42 mm oxidised M.S.pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete (Copper oxidised as per IS 1378) | Each | 86.78 |
| 9.64R | Providing and fixing ISI marked 85 x 42 mm powder coating.pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete | Each | 103.85 |
| 9.65.1 | Providing and fixing ISI marked oxidised MS door latches conforming to IS: 5930 with screws etc.complete (Copper oxidised as per IS 1378) - 300 x20x6 mm | Each | 83.45 |
| 9.65.1R | Providing and fixing ISI marked powder coating door latches conforming to IS: 5930 with screws etc.complete - 300 x20x6 mm | Each | 172.65 |
| 9.65.2 | Providing and fixing ISI marked oxidised MS door latches conforming to IS: 5930 with screws etc.complete (Copper oxidised as per IS 1378) - 250 x20x6 mm | Each | 73.49 |
| 9.65.2R | Providing and fixing ISI marked powder coating door latches conforming to IS: 5930 with screws etc.complete - 250 x20x6 mm | Each | 154.16 |
| 9.66.1 | Providing and fixing ISI marked oxidised M.S.handles conforming to IS: 4992 with necessary screws etc.complete (Copper oxidised as per IS 1378) - 125 mm | Each | 47.18 |
| 9.66.1R | Providing and fixing ISI marked powder coating handles conforming to IS: 4992 with necessary screws etc.complete - 125 mm | Each | 125.71 |
| 9.66.2 | Providing and fixing ISI marked oxidised M.S.handles conforming to IS: 4992 with necessary screws etc.complete (Copper oxidised as per IS 1378)- 100 mm | Each | 37.22 |
| 9.66.2R | Providing and fixing ISI marked powder coating handles conforming to IS: 4992 with necessary screws etc.complete - 100 mm | Each | 94.41 |
| 9.66.3 | Providing and fixing ISI marked oxidised M.S.handles conforming to IS: 4992 with necessary screws etc.complete (Copper oxidised as per IS 1378) - 75mm | Each | 28.68 |
| 9.66.3R | Providing and fixing ISI marked powder coating handles conforming to IS: 4992 with necessary screws etc.complete - 75mm | Each | 71.64 |
| 9.67.1 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS: 363 with necessary screws etc complste (Copper oxidised as per IS 1378) - 150 mm | Each | 40.72 |
| 9.67.1R | Providing and fixingpowder coating hasp and staple (safety type) conforming to IS: 363 with necessary screws etc complste - 150 mm | Each | 24.21 |
| 9.67.2 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS: 363 with necessary screws etc complete (Copper oxidised as per IS 1378) - 115 mm | Each | 36.11 |
| 9.67.2R | Providing and fixing powder coating hasp and staple (safety type) conforming to IS: 363 with necessary screws etc complste - 115 mm | Each | 22.16 |
| 9.67.3 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS: 363 with necessary screws etc complete (Copper oxidised as per IS 1378) - 90 mm | Each | 32.98 |
| 9.67.3R | Providing and fixing powder coating hasp and staple (safety type) conforming to IS: 363 with necessary screws etc complste - 90 mm | Each | 21.60 |
| 9.68.1 | Providing and fixing oxidised M.S.casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378) - 300 mm weighing not less than 330 gms | Each | 45.18 |
| 9.68.1R | Providing and fixing powder coating casement stays (straight peg type) with necessary screws etc. complete - 300 mm weighing not less than 200 gms | Each | 51.33 |
| 9.68.2 | Providing and fixing oxidised M.S.casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378) - 250 mm weighing not less than 280 gms | Each | 38.92 |
| 9.68.2R | Providing and fixing powder coating casement stays (straight peg type) with necessary screws etc. complete - 250 mm weighing not less than 150 gms | Each | 57.70 |
| 9.68.3 | Providing and fixing oxidised M.S.casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378) - 200 mm weighing not less than 240 gms | Each | 37.50 |
| 9.68.3R | Providing and fixing powder coating casement stays (straight peg type) with necessary screws etc. complete - 200 mm weighing not less than 120 gms | Each | 86.16 |
| 9.69 | Providing and fixing oxidised M.S.Safety chain with necessary fixtures for doors, (weighing not less than 450 gms) and Copper oxidised as per IS:1378 | Each | 81.15 |
| 9.69R | Providing and fixing powder coating Safety chain with necessary fixtures for doors, (weighing not less than 450 gms) | Each | 117.85 |
| 9.70.1 | Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc.complete - 125 x64 x1.90 mm | Each | 92.51 |
| 9.70.2 | Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc.complete - 100 x 58 x 1.90 mm | Each | 73.94 |
| 9.70.3 | Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc.complete - 75 x 47 x 1.80 mm | Each | 58.63 |
| 9.70.4 | Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc.complete - 50 x 37 x 1.5 mm | Each | 30.22 |
| 9.71.1 | Providing and fixing IS: 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc.complete - 125 X 64 x 2.50 mm | Each | 103.90 |
| 9.71.2 | Providing and fixing IS: 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc.complete - 100 x 60 x 2.50 mm | Each | 81.90 |
| 9.71.3 | Providing and fixing IS: 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc.complete - 75 x 50 x 2.50 mm | Each | 65.03 |
| 9.72.1 | Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 125 X 85 X 5.5 mm (heavy type) | Each | 424.37 |
| 9.72.2 | Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 125 X 70 X 4 mm (ordinary type) | Each | 298.19 |
| 9.72.3 | Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 100 X 85 X 5.5 mm (heavy type) | Each | 374.21 |
| 9.72.4 | Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 100 X 70 X 4 mm (ordinary type) | Each | 202.21 |
| 9.72.5 | Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 75 x 65 x 4 mm (heavy type) | Each | 205.12 |
| 9.72.6 | Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 75 x 40 x 2.5 mm (ordinary type) | Each | 117.77 |
| 9.72.7 | Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 50 x 40 x 2.5 mm (ordinary type) | Each | 53.72 |
| 9.73.1 | Providing and fixing bright finished brass parlimentary hinges with necessary screws etc.complete - 150 X 125 X 27 X 5 mm | Each | 468.67 |
| 9.73.2 | Providing and fixing bright finished brass parlimentary hinges with necessary screws etc.complete - 125 X 125 X 27 X 5 mm | Each | 427.84 |
| 9.73.3 | Providing and fixing bright finished brass parlimentary hinges with necessary screws etc.complete - 100 X 125 X 27 X 5 mm | Each | 399.96 |
| 9.73.4 | Providing and fixing bright finished brass parlimentary hinges with necessary screws etc.complete - 75 X 100 X 20 X 3.2 mm | Each | 341.69 |
| 9.74.1 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc complete - 250 x 10 mm | Each | 479.86 |
| 9.74.2 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc complete - 200 x 10 mm | Each | 389.43 |
| 9.74.3 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc complete - 150 X 10 mm | Each | 318.30 |
| 9.74.4 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc complete - 100 X 10 mm | Each | 242.10 |
| 9.75.1 | Providing and fixing bright finished brass door latch with necessary screws etc complete - 300 x 16 x 5 mm | Each | 349.73 |
| 9.75.2 | Providing and fixing bright finished brass door latch with necessary screws etc complete - 250 x 16 x 5 mm | Each | 334.08 |
| 9.76 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc complete | Each | 1,414.26 |
| 9.77 | Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc complete | Each | 1,247.82 |
| 9.78 | Providing and fixing bright finished brass night latch of approved quality including necessary screws etc complete | Each | 1,345.98 |
| 9.79.1 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc complete - 40mm | Each | 343.03 |
| 9.79.2 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc complete - 50mm | Each | 364.37 |
| 9.79.3 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc complete - 65mm | Each | 378.59 |
| 9.79.4 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc complete - 75mm | Each | 407.05 |
| 9.80 | Providing and fixing 50 mm bright finished brass cupboard or wardrope knob of approved quality with necessary screws | Each | 78.67 |
| 9.81.1 | Providing and fixing bright finished brass handles with screws etc complete - 125 mm | Each | 278.53 |
| 9.81.2 | Providing and fixing bright finished brass handles with screws etc complete - 100 mm | Each | 255.76 |
| 9.81.3 | Providing and fixing bright finished brass handles with screws etc complete - 75 mm | Each | 200.28 |
| 9.82 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete | Each | 121.48 |
| 9.83 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc complete | Each | 1,693.91 |
| 9.84 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc.complete | Each | 1,457.75 |
| 9.85 | Providing and fixing bright finished brass casement window fastener with necessary screws etc complete | Each | 91.88 |
| 9.86.1 | Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc complete - 300 mm weighing not less than 330 gms | Each | 219.97 |
| 9.86.2 | Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc complete - 250 mm weighing not less than 280 gms | Each | 177.23 |
| 9.86.3 | Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc complete - 200 mm weighing not less than 240 gms | Each | 168.70 |
| 9.87.1 | Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc complete - 150 mm | Each | 141.07 |
| 9.87.2 | Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc complete - 115mm | Each | 126.02 |
| 9.87.3 | Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc complete - 90 mm | Each | 116.63 |
| 9.88 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc complete | Each | 1,152.51 |
| 9.89 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc complete | Each | 1,031.58 |
| 9.90.1 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc complete -size 40 mm | Each | 335.91 |
| 9.90.2 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc complete -size 50 mm | Each | 357.26 |
| 9.90.3 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc complete -size 65 mm | Each | 378.59 |
| 9.90.4 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc complete -size 75 mm | Each | 407.05 |
| 9.91 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete | Each | 161.19 |
| 9.92.1 | Providing and fixing chromium plated brass handles with necessary screws etc complete - 125 mm | Each | 299.86 |
| 9.92.2 | Providing and fixing chromium plated brass handles with necessary screws etc complete - 100 mm | Each | 271.41 |
| 9.92.3 | Providing and fixing chromium plated brass handles with necessary screws etc complete - 75 mm | Each | 228.73 |
| 9.93 | Providing and fixing chromium plated brass casement window fastener with necessary screws etc.complete | Each | 156.63 |
| 9.94.1 | Providing and fixing chrominum plated brass casement stays (straight peg type) with necessary screws etc complete - 300 mm weighing not less than 330 gms | Each | 232.03 |
| 9.94.2 | Providing and fixing chrominum plated brass casement stays (straight peg type) with necessary screws etc complete - 250 mm weighing not less than 280 gms | Each | 212.12 |
| 9.94.3 | Providing and fixing chrominum plated brass casement stays (straight peg type) with necessary screws etc complete - 200 mm weighing not less than 240 gms | Each | 183.66 |
| 9.95.1 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 125 X 75 X 4 mm | Each | 169.08 |
| 9.95.2 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 125 X 63 X 4 mm | Each | 160.12 |
| 9.95.3 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 100 X 75 X 4 mm | Each | 144.04 |
| 9.95.4 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 100 X 63 X 4 mm | Each | 144.04 |
| 9.95.5 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 100 X 63 X 3.2 mm | Each | 131.95 |
| 9.95.6 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 75 X 63 X 4 mm | Each | 103.50 |
| 9.95.7 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 75 X 63 X 3.2 mm | Each | 94.96 |
| 9.95.8 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 75 X 45 X 3.2 mm | Each | 86.00 |
| 9.96.1 | Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc complete - 300 X 16 mm | Each | 379.99 |
| 9.96.2 | Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc complete - 250 X 16 mm | Each | 344.42 |
| 9.97.1 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with necessary screws etc. complete - 300 x10 mm | Each | 171.96 |
| 9.97.2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with necessary screws etc. complete - 250 x10 mm | Each | 163.00 |
| 9.97.3 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with necessary screws etc. complete - 200 x10 mm | Each | 147.92 |
| 9.97.4 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with necessary screws etc. complete - 150 x10 mm | Each | 118.93 |
| 9.97.5 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with necessary screws etc. complete - 100 x10 mm | Each | 83.51 |
| 9.98 | Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed required colour and shade, with necessary screws bolts, nut and washers etc complete | Each | 113.81 |
| 9.99 | Providing and fixing 50 cm long aluminium kicking plate of size 100 x 3.15 mm, anodised (anodic coating not less than grade A C 10 as per IS: 1868), transparent or dyed to required colour or shade, with necessary screws etc complete | Each | 227.62 |
| 9.100.1 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade,with necessary screws etc, complete - 125 mm | Each | 79.24 |
| 9.100.2 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade,with necessary screws etc, complete - 100 mm | Each | 70.28 |
| 9.100.3 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade,with necessary screws etc, complete - 75 mm | Each | 62.74 |
| 9.101.1 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc complete - Single rubber stopper | Each | 80.59 |
| 9.102 | Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade, with necessary screws etc complete | Each | 123.91 |
| 9.103 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc complete | Each | 1,575.58 |
| 9.104 | Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod | Metre | 94.81 |
| 9.105.1 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed / roll form G.I. sheet with zinc coating of 120 gms / sqm (both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm diametre 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm X 25 mm X 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture,s specification and direction all complete as per direction of Engineer-in-charge. - 75 mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS:2095: Part 3 (Board with BIS certification Marks) | Sqm | 2,177.94 |
| 9.105.2 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed / roll form G.I. sheet with zinc coating of 120 gms / sqm (both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm diametre 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm X 25 mm X 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture,s specification and direction all complete as per direction of Engineer-in-charge. - 75 mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I):2011 (Board with BIS certification marks) | Sqm | 2,012.91 |
| 9.105.3 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed / roll form G.I. sheet with zinc coating of 120 gms / sqm (both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm diametre 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm X 25 mm X 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture,s specification and direction all complete as per direction of Engineer-in-charge.- 66 mm overall thickness partition with 8 mm thick double skin Calcium Silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg / sq.cm, bending strength 100 kg /sq cm | Sqm | 2,024.29 |
| 9.105.4 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed / roll form G.I. sheet with zinc coating of 120 gms / sqm (both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm diametre 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm X 25 mm X 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture,s specification and direction all complete as per direction of Engineer-in-charge.- 66 mm overall thickness partition using 8 mm thick double skin multipurpose cement board Type -B, Category -III as per IS;14862: 2000 reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) with suitable fibre cement screws | Sqm | 2,177.94 |
| 9.105.5 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed / roll form G.I. sheet with zinc coating of 120 gms / sqm (both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm diametre 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm X 25 mm X 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture,s specification and direction all complete - 66 mm overall thickness partition using 8mm thick double skin multipurpose cement bonded wood particle board manufactured as per IS:14276 with suitable cement bonded board screws | Sqm | 2,204.99 |
| 9.106.1 | Providing and fixing PTMT handles with necessary screws etc complete - 125x34 x 24 mm weighing not less than 23 gms | Each | 49.91 |
| 9.106.2 | Providing and fixing PTMT handles with necessary screws etc complete - 150x34 x 24 mm weighing not less than 26 gms | Each | 54.17 |
| 9.107.1 | Providing and fixing PTMT butt hinges with necessary screws etc complete - 75 x60 x10 mm fitted with 5.5 mm dia M.S. bright bar rod weighing not less than 34 gms | Each | 59.08 |
| 9.107.2 | Providing and fixing PTMT butt hinges with necessary screws etc complete - 100 x75 x10 mm fitted with 5.5 mm dia M.S. bright bar rod weighing not less than 53 gms | Each | 61.67 |
| 9.108.1 | Providing and fixing PTMT Tower bolts with 12 mm one piece rod inside and necessary screws etc., complete - 152 x42x18 mm weighing not less than 60 gms | Each | 72.53 |
| 9.108.2 | Providing and fixing PTMT Tower bolts with 12 mm one piece rod inside and necessary screws etc., complete - 202 x42x18 mm weighing not less than 78 gms | Each | 100.21 |
| 9.109 | Providing and fixing PTMT door catcher of length 72 mm and dia of 42 mm with suitable washers weighing not less than 33 gms | Each | 34.84 |
| 9.110P | Providing and fixing Bamboo jaffery / fencing consisting of superior quality 25 mm dia (average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Padak wood in scantling of section 50 x 25 mm, fixed with nails and G.I wire on existing support, complete as per direction of Engineer-in-charge | Sqm | 754.15 |
| 9.110V | Providing and fixing Bamboo jaffery / fencing consisting of superior quality 25 mm dia (average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Vengai wood in scantling of section 50 x 25 mm, fixed with nails and G.I wire on existing support, complete as per direction of Engineer-in-charge | Sqm | 706.97 |
| 9.111.1B | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc with iron screws, plugs and priming coat on unexposed surface etc. complete Burma teak wood - 50 x 50 mm (base and height) | Metre | 1,207.47 |
| 9.111.1F | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc with iron screws, plugs and priming coat on unexposed surface etc. complete Forest teak wood - 50 x 50 mm (base and height) | Metre | 465.37 |
| 9.112 | Providing and fixing teak wood lipping / moulded beading or taj beading of size 18 x5 mm fixed with wooden adhesive of approved quality and screws / nails on the edges of the Pre - laminated particle board as per direction of Engineer-in-charge | Metre | 97.81 |
| 9.113 | Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer-in-charge | Each | 745.19 |
| 9.114.1 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc complete - Triple strip vertical type | Each | 33.14 |
| 9.114.2 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc complete - Double strip horizontal type | Each | 24.61 |
| 9.115 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per direction of Engineer-in-charge | Set | 231.48 |
| 9.116 | Providing and fixing sliding arrangement in racks / cupboards / cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) | Each | 16.10 |
| 9.117.1 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance +_ 1mm), with wall thickness 2.0 mm (+-0.2mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19 x 19 mm and 1mm (+-0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-charge - Extruded section profile size 48 x 40 mm | Metre | 263.10 |
| 9.117.2 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance +_ 1mm), with wall thickness 2.0 mm (+-0.2mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19 x 19 mm and 1mm (+-0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-charge - Extruded section profile size 42 x 50 mm | Metre | 284.44 |
| 9.118.1 | Providing and fixing to existing door frames - 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59 x 24 mm and wall thickness 2 mm (+- 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised / plastic brackets of size 75 x 220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S.tube of size 20x20 mm and 1mm (+- 0.1mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100 x 24 mm and 2 mm (+-0.2 mm) wall thickness, fixed to the shutter styles by means of plastic / galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm (+_ 0.1mm) wall thickness. They panels filled vertcally and tie bar at two places by inserting horizontally 6 mm galvanised M.S.rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge - (For W.C. and bathroom door shutter) | Sqm | 2,395.68 |
| 9.118.3 | Providing and fixing to existing door frames - 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm x 25 mm or less as per requirement with an average wall thickness of 1 mm (+- 0.3mm). PVC foam end cap of size 23 x 10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. An M.S.tube having dimensions 19 mm x 19 mm and 1.0 mm (+- 0.1mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end -cap of the size 25 mm x 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer's specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places | Sqm | 3,189.52 |
| 9.119 | Providing and fixing factory made P.V.C. door frame of size 50x 47 mm with a wall thickness of 5mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 nos, of 150mm long brackets of 15 x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 x19 mm M.S.square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S.screws of 65 / 100 mm size, complete as per manufacturter's specification and direction of Engineer-in-charge | Metre | 498.96 |
| 9.120.1 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S.tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15 x15 mm for top & bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5 mm x 2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded / sealed to the styles & rails with 7 mm (5 mm + 2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C" Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge manufacturer's specification & drawing - 30mm thick plain PVC door shutters | Sqm | 3,158.22 |
| 9.120.2 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S.tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15 x15 mm for top & bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5 mm x 2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded / sealed to the styles & rails with 7 mm (5 mm + 2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C" Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge manufacturer's specification & drawing - 30mm thick pre laminated PVC door shutters | Sqm | 3,812.63 |
| 9.121 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S.stay shall be provided at the bottom to steady the frame | Metre | 535.95 |
| 9.122.1 | Providing and fixing to existing door frames - 30mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames | Sqm | 2,974.70 |
| 9.122.2 | Providing and fixing to existing door frames - 30mm thick Fibre Glass Reinforced Plastic (FRP) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throuhout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table -3 of IS: 14856, complete as per direction of the Engineer-in-charge | Sqm | 4,445.70 |
| 9.123 | Providing and fixing facory made door frame (single rebate) made out of solid foam PVC extruded profile of minimum 60mm width and minimum 30mm thickness, having homogenous fine cellular structure and integaral smooth outer skin. The frame's vertcal and horizontal members to be mitered cut and joined together with PVC solvent adhesive / cement and both corners strenthened with fully threaded steel screws (of required size) fixed diagonally. The door frame is to be fixed to door jambs using 6 nos.SS 304 grade minimum 8mm dia CSK Phillips stainless steel self tapping screws / fastners with PA6 grade polyamide sleeves both of required size, and gap if any between the door frame and the jamp must be filled with clear silicon, complete as per direction of Engineer-in- charge | Metre | 624.27 |
| 9.123A | Providing PVC moulding/ architrave for door frame made up of extruded solid foam PVC profile having homogenous fine cellular structure with smooth outer integral skin, minimum 30mm width and minimum 12mm thick suitable for fixing to frame. The moulding shall be snap fitted in the groove provided in the frame & fixed with PVC solvent adhesive / cement and self tapping screws (of required size) complete as per direction of Engineer-in-charge | Metre | 133.43 |
| 9.124.1 | Providing and fixing factory made PVC door shutter made of solid foam PVC profiles of thickness 5mm and 15mm at edges integrally extruded for vertical style and horizontal (top/bottom/lock) rails of minimum cross section of 70mm x 28mm, of shape and design as per manufacture's specification having homogenous fine celluar structure and smooth integral outer skin, inserted with G.I. "C' section/rectangular tube profile of minimum 0.30mm thickness with 120 gsm coating as stiffeners as per manufacturer's specification Mitred cut joints for styles and rails provided with telescopic polymeric 'L" corners are jointed together using solvent adhesive and strengthened with fully threaded stainless steel screws (of required size) through reinforced stiffener with panelling of specified solid foam PVC board / high pressure laminate of required thickness and of approved design and shade (matching the styles and rails), secured within styles and rails with specially designed solid foam PVC moulded beadings of required size using PVC solvent adhesive /cement. The finished door shutter including SS hardware, 1 no. ss sliding bolt 200x10mm, 1 no SS tower bolt 200x 10mm and 2 nos.SS handles 125mm, shall be fixed to frame with 3 nos. stainless steel hinges of minimum size 100x58x1.9mm and ss screws of required size complete as per direction of Engineer-in-charge (Cost of above hardware is inclusive in rates) - 5mm thick solid foam PVC panel of required size with moulded / extruded beading of appropriate design shape and size as per manufacturer's specification (to secure the panel insert tight in place within the style and rails of shutter) matching the colour and shade of shutter frame. Non decorative type | Sqm | 3,852.79 |
| 9.124.2 | Providing and fixing factory made PVC door shutter made of solid foam PVC profiles of thickness 5mm and 15mm at edges integrally extruded for vertical style and horizontal (top/bottom/lock) rails of minimum cross section of 70mm x 28mm, of shape and design as per manufacture's specification having homogenous fine celluar structure and smooth integral outer skin, inserted with G.I. "C' section/rectangular tube profile of minimum 0.30mm thickness with 120 gsm coating as stiffeners as per manufacturer's specification Mitred cut joints for styles and rails provided with telescopic polymeric 'L" corners are jointed together using solvent adhesive and strengthened with fully threaded stainless steel screws (of required size) through reinforced stiffener with panelling of specified solid foam PVC board / high pressure laminate of required thickness and of approved design and shade (matching the styles and rails), secured within styles and rails with specially designed solid foam PVC moulded beadings of required size using PVC solvent adhesive /cement. The finished door shutter including SS hardware, 1 no. ss sliding bolt 200x10mm, 1 no SS tower bolt 200x 10mm and 2 nos.SS handles 125mm, shall be fixed to frame with 3 nos. stainless steel hinges of minimum size 100x58x1.9mm and ss screws of required size complete as per direction of Engineer-in-charge (Cost of above hardware is inclusive in rates) - 5mm thick solid foam PVC panel of required size with moulded / extruded beading of appropriate design shape and size as per manufacturer's specification (to secure the panel insert tight in place within the style and rails of shutter) matching the colour and shade of shutter frame. Decorative type | Sqm | 3,995.06 |
| 9.124.3 | Providing and fixing factory made PVC door shutter made of solid foam PVC profiles of thickness 5mm and 15mm at edges integrally extruded for vertical style and horizontal (top/bottom/lock) rails of minimum cross section of 70mm x 28mm, of shape and design as per manufacture's specification having homogenous fine celluar structure and smooth integral outer skin, inserted with G.I. "C' section/rectangular tube profile of minimum 0.30mm thickness with 120 gsm coating as stiffeners as per manufacturer's specification Mitred cut joints for styles and rails provided with telescopic polymeric 'L" corners are jointed together using solvent adhesive and strengthened with fully threaded stainless steel screws (of required size) through reinforced stiffener with panelling of specified solid foam PVC board / high pressure laminate of required thickness and of approved design and shade (matching the styles and rails), secured within styles and rails with specially designed solid foam PVC moulded beadings of required size using PVC solvent adhesive /cement. The finished door shutter including SS hardware, 1 no. ss sliding bolt 200x10mm, 1 no SS tower bolt 200x 10mm and 2 nos.SS handles 125mm, shall be fixed to frame with 3 nos. stainless steel hinges of minimum size 100x58x1.9mm and ss screws of required size complete as per direction of Engineer-in-charge (Cost of above hardware is inclusive in rates) - 3mm thick high pressure laminate (decorative type) with moulded / extruded beading of appropriate design shape and size as per manufacturer's specification (to secure the panel insert tight in place within the style and rails of shutter) matching the colour and shade of shutter frame. Non Decorative type | Sqm | 1,284.93 |
| 9.126.1 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Marine plywood conforming to IS: 710 | Sqm | 2,867.50 |
| 9.126.2 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Fire retardant plywood conforming to IS: 5509 | Sqm | 2,753.68 |
| 9.127.1 | Providing & fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 type S, including cost of adhesive of approved quality - 1.5 mm thick | Sqm | 1,168.32 |
| 9.127.2 | Providing & fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 type S, including cost of adhesive of approved quality - 1.0 mm thick | Sqm | 1,011.83 |
| 9.128 | Providing and fixing factory made fibreglass reinforced plastics (F.R.P) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50 x 2 mm thick M.S. flat with 12 mm in built hole for grouting on the exixting wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings. The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight(Only plan area of chajjas shall be measured for making payment) | Sqm | 4,746.39 |
| 9.129 | Providing and fixing cupboard shutters 25 mm thick, with Pre - laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade I Type II), having oneside decorative lamination and other side balancing lamination, including teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-charge | Sqm | 2,273.89 |
| 9.130.1 | Providing and fixing cup board shutters with 25 mm thick veneered particle board IS: 3097 marked, exterior grade (Grade 1), of approved make including teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-charge - with decorative veneering on one side and commercial veneering on other side | Sqm | 2,373.47 |
| 9.130.2 | Providing and fixing cup board shutters with 25 mm thick veneered particle board IS: 3097 marked, exterior grade (Grade 1), of approved make including teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-charge - with non decorative veneering on both sides | Sqm | 2,231.21 |
| 9.131.1 | Providing and fixing factory made shutters of pre - laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade 1 type II, of approved design, and edges sealed with water resistant paint and lipped with aluminium 'U' type edge beading all - round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws, including fixing of aluminium hinges 100 x 63 x 4 mm etc. complete as per architectural drawing and direction(Cost of 'U' beading and hinges will be paid for separately) - 25 mm thick | Sqm | 2,411.56 |
| 9.132 | Providing and fixing aluminium U beading of required size to Pre laminated / flush door shutter, including fixing etc. Complete as per direction of Engineer-in-charge | KG | 582.22 |
| 9.133.1.1 | Providing and fixing, in position concealed G.I.section for wall panelling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self - tapping dry wall screws. Board is fixed to the 'W" profile with 25 mm countersunk ribbed head screws at @ 200 mm C/C., all complete as per the drawing and directions, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish - Tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg / sq cm, Bending strength 100 kg / sqcm - 10mm thick | Sqm | 1,629.90 |
| 9.133.2.1 | Providing and fixing, in position concealed G.I.section for wall panelling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self - tapping dry wall screws. Board is fixed to the 'W" profile with 25 mm countersunk ribbed head screws at @ 200 mm C/C., all complete as per the drawing and directions, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish - Multipurpose cement board reinforced with suitable fibre cement screw. - 8mm thick cement fibre board, Type-B, Category - III as per IS:14862:2000 | Sqm | 1,479.62 |
| 9.133.2.2 | Providing and fixing, in position concealed G.I.section for wall panelling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self - tapping dry wall screws. Board is fixed to the 'W" profile with 25 mm countersunk ribbed head screws at @ 200 mm C/C., all complete as per the drawing and directions, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish - Multipurpose cement board reinforced with suitable fibre cement screw. - 8mm thick cement bonded board wood particle board as per IS:14276 | Sqm | 1,492.14 |
| 9.133.3.1 | Providing and fixing, in position concealed G.I.section for wall panelling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self - tapping dry wall screws. Board is fixed to the 'W" profile with 25 mm countersunk ribbed head screws at @ 200 mm C/C., all complete as per the drawing and directions, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish - Plain Gypsum plaster board conforming to IS:2095 Part -1:2011 (board with BIS certification marks)-12.5mm thick | Sqm | 1,388.83 |
| 9.134.1.1.1F | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws - 35 mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - Forest teak wood | Sqm | 6,962.99 |
| 9.134.1.1.2P | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws - 35 mm thick shutters - with ISI marked M.S.pressed butt hinges bright finished of required size - Kiln seasoned and chemically treated Padak wood | Sqm | 7,615.94 |
| 9.134.1.2.1F | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws - 35 mm thick shutters - With ISI marked stainless steel butt hinges of required size - Forest teak wood | Sqm | 7,067.13 |
| 9.134.1.2.2P | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws - 35 mm thick shutters - With ISI marked stainless steel butt hinges of required size - Kiln seasoned and chemically treated Padak wood | Sqm | 7,720.08 |
| 9.134.2.1.1F | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws - 30 mm thick shutters - With ISI marked M.S.pressed butt hinges bright finished of required size - Forest teak wood | Sqm | 6,186.96 |
| 9.134.2.1.2P | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws - 30 mm thick shutters - With ISI marked M.S.pressed butt hinges bright finished of required size - Kiln seasoned and chemically treated Padak wood | Sqm | 6,745.90 |
| 9.134.2.2.1F | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws - 30 mm thick shutters - With ISI marked stainless steel butt hinges of required size - Forest teak wood | Sqm | 6,291.10 |
| 9.134.2.2.2P | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws - 30 mm thick shutters - With ISI marked stainless steel butt hinges of required size - Kiln seasoned and chemically treated Padak wood | Sqm | 6,850.05 |
| 9.135.1B | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.50 mm all complete - with Burma teak wood beading 62 x 19 mm | Sqm | 4,276.85 |
| 9.135.1F | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.50 mm all complete - with Forest teak wood beading 62 x 19 mm | Sqm | 2,175.62 |
| 9.135.2 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.50 mm all complete - with 12 mm mild steel U beading | Sqm | 1,492.01 |
| 9.136 | Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm / sqm) dully filled with vermuculite based concrete mix, suitable for mountaing 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately) | Metre | 1,520.42 |
| 9.137 | Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part- II), tested and certified as per laboratory approved by Engineer- in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately) | Sqm | 6,499.95 |
| 9.138 | Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c, including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 minutes of fire resistance both integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm | Sqm | 6,438.37 |
| 9.138.1 | Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size, made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm / sq.m), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I.beading etc., complete all - with clear fire resistant glass panes 6 mm thick of approved brand, having minimum 60 minutes fire resistance | Sqm | 33,540.07 |
| 9.139 | Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer-in-charge, all complete | Nos | 7,634.04 |
| 9.140.1 | Providing and fixing plain lining with necessary screws / nuts & bolts / nails, including a coat of approved primer on one face, and fixed on wooden / steel frame work, complete as per direction of Engineer-in-charge (Frame work shall be paid for separately) - 12 mm thick commercial ply conforming to IS:1328 BWR type | Sqm | 1,336.39 |
| 9.141 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge | Metre | 784.88 |
| 9.143 | Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge | Metre | 554.74 |
| 9.144 | Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm (± 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer's specification and direction of Engineer-in-charge | Sqm | 3,818.32 |
| 9.145 | Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineer- in- charge | Metre | 611.65 |
| 9.147A.1 | Providing and fixing factory made uPVC white colour casement /casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing.(Single / double glass panes and silicon sealent shall be paid separately) - Casement window single panel with S.S.friction hinges (300x19x1.9mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 + or - 0.2mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75sqm) - (casement window size 0.50 x 1.35 m) | Sqm | 10,874.37 |
| 9.147B.1 | Providing and fixing factory made uPVC white colour fixed glazed windows / ventilators comprising of uPVC multi - chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.6 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I.fastners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing. (Single / double glass panes and silicon sealant shall be paid separately) - Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 + or - 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm) - Fixed window size - 1.20x0.50 m | Sqm | 7,651.88 |
| 9.147C.1 | Providing and fixing factory made uPVC white colour casement / casement cum fixed glazed door comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size accoring to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I.fastners 100 x8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing. (Single / double glass panes and silicon sealent shall be paid separately) - casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 + or - 0.2mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.00 sqm) - casement door size 0.9 x 2.10 | Sqm | 13,152.97 |
| 9.147D.1 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50m in height dimension comprising of uPVC multi - chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I. fastners 100 x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shyall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing.(Single / double glass panes, wire mesh and silicon sealent shall be paid separately) - Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 + or - 0.2 mm and single glazing bead of appropriate dimension.(Area of window upto 1.75 sqm) - sliding window size 1.20x1.35 m | Sqm | 7,951.19 |
| 9.147E.1 | Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi - chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC ectruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded al all corners, including drilling of holes for fixing hardware's and draiage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) - Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 + or - 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm) | Sqm | 7,852.53 |
| 9.147F.1 | Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in -built roller track and sash extruded profiles duly reinforced with 1.60 + or - mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I.fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) - Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 + or - mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) | Sqm | 7,260.88 |
| 9.147.1.1 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Casement Window (outward / Inward opening) with hinge System - Frame (50 mm X 50 mm) | Metre | 736.51 |
| 9.147.1.2 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Casement Window (outward / Inward opening) with hinge System - Sash (Style and Rail) (62 mm x 34 mm) | Metre | 706.64 |
| 9.147.1.3 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Casement Window (outward / Inward opening) with hinge System - Mullion (intermediate Section) (66 mm x 50 mm) | Metre | 776.83 |
| 9.147.1.4 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Casement Window (outward / Inward opening) with hinge System - 'T' Profile (one vertical length in between two shutters) (24 mm x 34.5 mm) | Metre | 164.41 |
| 9.147.1.5 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Casement Window (outward / Inward opening) with hinge System - Glazing bead (12 mm X 18 mm) | Metre | 209.21 |
| 9.148.1 | Providing and fixing stainless steel (SS - 304 grade) friction hinges to the side / top hung uPVC windows, of approved quality, with necessary stainless steel screws etc as per direction of Engineer-in-charge - 200 x 19 x 1.9 mm | Each | 309.99 |
| 9.150 | Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc., complete | Each | 158.37 |
| 9.152 | Providing and fixing steel roller for uPVC sliding door with necessary screws etc. Complete | Each | 144.14 |
| 9.154 | Providing and fixing frame work for partitions / wall lining etc. made of 50 x 50 x 1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall / ceiling / floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete all as per direction of Engineer-in-charge | KG | 160.04 |
| 9.156.1 | Providing and fixing Pre-laminated medium density fibre board exterior grade (Grade -I) IS:14587:1998 marked, to frame, backing or studding with screws etc.complete (Frames, backing or studding to be paid separately). - Pre -laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 | Sqm | 1,142.21 |
| 9.157.1 | Providing and fixing Pre -laminated medium density fibre board IS: 14587: 1998 marked, with one side decorative lamination other side balancing lamination Grade I (exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately) - Pre - laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick conforming to IS:14587 | Sqm | 1,911.93 |
| 9.158.1 | Providing and fixing in wall lining medium density fibre board IS: 14587: 1998 marked, Pre - laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete - 12 mm thick | Sqm | 1,375.08 |
| 9.159 | Providing and fixing 25 mm thick pre-laminated medium density fibre board exterior grade (Grade -I) IS: 14587: 1998 marked one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S.piano hinges IS: 3818 marked with necessary screw etc all complete | Sqm | 2,056.84 |
| 9.160.1 | Providing and fixing skirting with Pre - laminated medium density fibre board exterior grade (Grade -I) conforming to IS:14587: 1998 marked with, (one side decorative and other side balancing lamination and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc all complete - 18 mm thick | Sqm | 2,355.28 |
| 9.161 | Providing and fixing fire resistant door frame of section 50x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6mm thick GI sheet (Zinc Coating not less than 120gm / sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density minimum 96Kg/cum. The frame will have a provision of G.I.Anchor fastners 14 nos (5 each on vertical style and 4 on horizontal style of size M10 x 80) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter. The frame shall be finished with a approved fire resistant primer of Powder coating of not less than 30 micron in desired shade as per the direction of Engineer -in- charge(Cost of SS ball bearing hinges is excluded).- Door size -1710 x 2050 mm | Metre | 1,469.67 |
| 9.163 | Providing and fixing non load bearing fixed frame for fire resistant glazed partition for 120 minutes Fire Rating, made out to a profile of dimension 60mm x 70mm of 1.6mm thick galvanised steel sheet as per test evidence suitable for fixing fire rated glass for 120 minutes of both integrity & radiation control(EW120) & minimum 20 minutes of insulation (E120). The profile has to be fixed to the supporting construction by means of anchor fasteners of size M10x80, every 150mm from the edges and every 500 mm (approx) c/c. Linear measurement of frames shall be measured for payment. The frame shall be filled with mineral wool insulation of density minimum 96kg /cum and finished with a approved fire resistant primer of powder coating of not less than 30 micron in desired shade as per NBC 2016, IS 16231 (Part-3): 2016 and direction of Engineer-in-charge | Metre | 1,469.67 |
| 9.165.1 | Providing and fixing bright / matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete - 125 mm | Nos | 122.69 |
| 9.166.1 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS: 15786:2008 of approved brand and shade with suitable full threaded steel screws etc in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge of Engineer -in-charge (Note: Fittings to be paid separately) - 18mm thick | Sqm | 1,424.80 |
| 9.167 | Providing and fixing 6mmthick both sides prelaminated cement bonded wood particle board as per IS:15786: 2008 of approved brand and shade with suitable full threaded steel screws etc on the backing of racks, drawer, cub-boards, kitchen cabinet and kitchen counter etc all complete as per direction of Engineer-in- charge | Sqm | 1,060.05 |
| 9.169 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, sheleves, racks, almirah, cupboard and drawer etc inluding nessery nails, screws, etc complete as per direction of Engineer-in-charge | Sqm | 2,766.22 |
| 9.171 | Providing and fixing stainless steel soft closing spring hinges at zero degree hinges (hydraulic type) of approved make / brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge | Nos | 286.29 |
| 9.147A.2 | Providing and fixing factory made uPVC white colour casement /casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing.(Single / double glass panes and silicon sealent shall be paid separately) - Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 + or - 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm) - casement window size 1.00x1.35 m | Sqm | 10,171.86 |
| 9.147C.2 | Providing and fixing factory made uPVC white colour casement / casement cum fixed glazed door comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size accoring to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I.fastners 100 x8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing. (Single / double glass panes and silicon sealent shall be paid separately) - casement door with top hung ventilator with 3D and S.S.friction hinges (400x19x1.9mm) made of (big series) frame 67 x 64 mm & sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + or - 0.2mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm) - casement door size 0.9 x 2.70 | Sqm | 10,978.77 |
| 9.147D.2 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50m in height dimension comprising of uPVC multi - chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I. fastners 100 x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shyall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing.(Single / double glass panes, wire mesh and silicon sealent shall be paid separately) - Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 + or - 0.2 mm and single glazing bead of appropriate dimension.(Area of window upto 1.75 sqm) - sliding window size 1.20x1.35 m | Sqm | 10,357.71 |
| 9.147E.2 | Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi - chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC ectruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded al all corners, including drilling of holes for fixing hardware's and draiage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) - Two track four panels sliding window made of (big series) frames 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 +or- 0.2mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm) | Sqm | 7,083.35 |
| 9.147F.2 | Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi - chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC ectruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded al all corners, including drilling of holes for fixing hardware's and draiage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) -Two track four panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 + or - 0.2mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm to 10.00 sqm) | Sqm | 6,572.70 |
| 9.147.2.1 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Casement Window (with friction hinge & outward opening) - Casement frame (67 mm x 62 mm) | Metre | 832.10 |
| 9.147.2.2 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Casement Window (with friction hinge & outward opening) - Casement window Sash / Mullion (67 mm x 75 mm) (style, rail and intermediate section) | Metre | 891.86 |
| 9.147.2.3 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Casement Window (with friction hinge & outward opening) - Casement glazing bead (35 mm x 18 mm) | Metre | 279.41 |
| 9.148.2 | Providing and fixing stainless steel (SS - 304 grade) friction hinges to the side / top hung uPVC windows, of approved quality, with necessary stainless steel screws etc as per direction of Engineer-in-charge - 250 x 19 x 1.9 mm | Each | 345.56 |
| 9.165.2 | Providing and fixing bright / matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete - 100 mm | Nos | 91.11 |
| 9.147A.3 | Providing and fixing factory made uPVC white colour casement /casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing.(Single / double glass panes and silicon sealent shall be paid separately) - Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 + or - 0.2mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm) - Casement window size 1.20x1.80m | Sqm | 10,196.94 |
| 9.147D.3 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50m in height dimension comprising of uPVC multi - chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I. fastners 100 x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shyall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing.(Single / double glass panes, wire mesh and silicon sealent shall be paid separately) - Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 + or - 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of window above 1.75 sqm upto 2.50 sqm) - sliding window size 1.50x1.35 m | Sqm | 8,209.85 |
| 9.147F.3 | Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi - chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC ectruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded al all corners, including drilling of holes for fixing hardware's and draiage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) - Three track three panels sliding door made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + or - 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) | Sqm | 7,335.04 |
| 9.147.3.1 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Sliding Window (Two Track, 2/4 Shutters) - Two Track Sliding Frame (67 mm x 52 mm) | Metre | 951.67 |
| 9.147.3.2 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Sliding Window (Two Track, 2/4 Shutters) - Sliding Window sash (60 mm x 44 mm) | Metre | 891.93 |
| 9.147.3.3 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Sliding Window (Two Track, 2/4 Shutters) - Sliding interlock for Window (one vertical length in each shutter) (45.5 mm x 28 mm) | Metre | 266.83 |
| 9.147.3.4 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Sliding Window (Two Track, 2/4 Shutters) - Sliding Glazing bead (35 mm x 18 mm) | Metre | 279.41 |
| 9.147.4.1 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Sliding door (Two Track, 2/4 Shutters) - Two track Sliding frame (67 mm x 52 mm) | Metre | 915.90 |
| 9.147.4.2 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Sliding door (Two Track, 2/4 Shutters) - Sliding door Sash (80 mm x 44 mm) | Metre | 1,154.47 |
| 9.147.4.3 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Sliding door (Two Track, 2/4 Shutters) - Sliding Interlock for door (one vertical length in each shutter) (45.5 mm X 28 mm) | Metre | 266.83 |
| 9.147.4.4 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket,1.2 +- 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete (Glazing, hardware hinges and fitting etc. to be paid separately) Note: Each member of window to be measured separately with clear length - Sliding door (Two Track, 2/4 Shutters) - Sliding Glazing bead (35 mm x 18 mm) | Metre | 279.41 |
| 9.148.3 | Providing and fixing stainless steel (SS - 304 grade) friction hinges to the side / top hung uPVC windows, of approved quality, with necessary stainless steel screws etc as per direction of Engineer-in-charge - 300 x 19 x 1.9 mm | Each | 366.90 |
| 9.149 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete | Each | 189.66 |
| 9.151 | Providing and fixing steel roller for uPVC sliding window with necessary screws etc. Complete | Each | 94.35 |
| 9.153 | Providing and fixing steel (white powder coated) crescent lock for uPVC sliding window / door with necessary screws etc.complete | Each | 172.59 |
| 9.155 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25 mm to 40 mm thick: Pre -laminated with decorative lamination on both side exterior grade - I MDF Board 12 mm thick confirming to IS: 14587 | Sqm | 2,144.98 |
| 9.156.2 | Providing and fixing Pre-laminated medium density fibre board exterior grade (Grade -I) IS:14587:1998 marked, to frame, backing or studding with screws etc.complete (Frames, backing or studding to be paid separately). - Pre -laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick confirming to IS:14587 | Sqm | 1,560.47 |
| 9.157.2 | Providing and fixing Pre -laminated medium density fibre board IS: 14587: 1998 marked, with one side decorative lamination other side balancing lamination Grade I (exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately) - Pre - laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 25 mm thick conforming to IS:14587 | Sqm | 1,852.17 |
| 9.158.2 | Providing and fixing in wall lining medium density fibre board IS: 14587: 1998 marked, Pre - laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete - 18 mm thick | Sqm | 1,852.37 |
| 9.158.3 | Providing and fixing in wall lining medium density fibre board IS: 14587: 1998 marked, Pre - laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete - 25 mm thick | Sqm | 1,789.77 |
| 9.162 | Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes Fire Rating confirming to IS:3614(Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60mm x 60mm wide and bottom rail of 110 mm x 60mm made out of 1.6mm thick G.I.sheet (zinc coating not less than 120gm/ sqm) duly filled mineral wool insulation having density minimum 96 kg / cum and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer of powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately)- Door size -1710 x 2050 mm | Sqm | 8,300.35 |
| 9.164 | Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I.beading made out of 1.6mm thick G.I.Sheet (zinc coating not less than 120 gm / sqm) of size 20x33mm srewed with M4 X38mm SS screws at distance 75mm from the edge and 150 mm c/c, including applying a coat of approved fire resistant primer / powder coating not less than 30 micron on G.I.beading and special ceramic tape of 5 x 20mm size etc complete in all respect as per NBC 2016, IS 16231 (Part-3): 2016 and as per direction of Engineer-in-charge with glass of required thickness having 120miniutes of fire resistants both integrity & raditiion control (EW120) and minumum 20 minutes of insulation (EI 20). The manufacturer have to give test report / certification of fire glass and the glass should have the stamp showing the value of E. EW & EI. The glass shall be tested in approved NABL accredited lab or buy any other accreritation body which operates in accordance with ISO/IEC 17011 and accredited labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligeble, The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm | Sqm | 41,694.39 |
| 9.165.3 | Providing and fixing bright / matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete - 75mm | Nos | 56.54 |
| 9.168 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc with auto closing spring loaded hinges (hydraulic type) etc complete as per direction of Engineer-in-charge (payment of providing and fixing auto closing hinges shall be paid separately) | Sqm | 3,026.70 |
| 9.170.1 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc complete as per direction of Engineer-in-charge.- 200mm | Nos | 193.25 |
| 9.173 | Providing and fixing raedy made 304 grade stainless steel modular kitchen basket and accessories such as right angle basket, (Plain cup and saucer, plant, partition, bottle rack, thali,cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, multi purpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts and bolts, Stainless steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment pupose only weight of stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners, telescopic basket channels etc., Payment of providing and fixing telescopic channel shall be paid separately) | KG | 567.09 |
| 9.147A.4 | Providing and fixing factory made uPVC white colour casement /casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing.(Single / double glass panes and silicon sealent shall be paid separately) - casement window single panel with S.S.friction hinges (400 x 19 x 1.9mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 + or - 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm) - casement window size 0.70 x 1.5 m | Sqm | 11,152.58 |
| 9.147D.4 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50m in height dimension comprising of uPVC multi - chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I. fastners 100 x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shyall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing.(Single / double glass panes, wire mesh and silicon sealent shall be paid separately) - Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (bigl series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3+ or - 0.2 mm and single glazing bead / double glazinf bead of appropriate dimension.(Area of window above 1.75 sqm) - sliding window size 1.80x1.35 m | Sqm | 10,035.68 |
| 9.147F.4 | Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi - chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC ectruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded al all corners, including drilling of holes for fixing hardware's and draiage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) - Three track three panels sliding door with fly proof S.S. wire mesh (Two nos.glazed & one no.wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + or - 0.2 mm and single glazing bead / double galzing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) | Sqm | 9,118.30 |
| 9.148.4 | Providing and fixing stainless steel (SS - 304 grade) friction hinges to the side / top hung uPVC windows, of approved quality, with necessary stainless steel screws etc as per direction of Engineer-in-charge - 350 x 19 x 1.9 mm | Each | 487.82 |
| 9.147A.5 | Providing and fixing factory made uPVC white colour casement /casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing.(Single / double glass panes and silicon sealent shall be paid separately) - Casement window double panels with S.S. friction hinges (350x19x1.9mm) made of (big series) frame 67 x 60 mm & sash / mullion 67 x 80mm both having wall thickness of 2.3 + or - 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of window above 1.50 sqm) | Sqm | 11,491.19 |
| 9.147D.5 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50m in height dimension comprising of uPVC multi - chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I. fastners 100 x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shyall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing.(Single / double glass panes, wire mesh and silicon sealent shall be paid separately) - Three track three panels sliding window made of (big series) frame 116 x45 mm & sash 46x62 mm both having wall thickness of 2.3 + or - 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of window above 1.75 sqm) - sliding window size 1.80x1.35 m | Sqm | 9,556.41 |
| 9.148.5 | Providing and fixing stainless steel (SS - 304 grade) friction hinges to the side / top hung uPVC windows, of approved quality, with necessary stainless steel screws etc as per direction of Engineer-in-charge - 400 x 19 x 1.9 mm | Each | 530.50 |
| 9.160.2 | Providing and fixing skirting with Pre - laminated medium density fibre board exterior grade (Grade -I) conforming to IS:14587: 1998 marked with, (one side decorative and other side balancing lamination and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc all complete - 25 mm thick | Sqm | 2,292.69 |
| 9.147A.6 | Providing and fixing factory made uPVC white colour casement /casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing.(Single / double glass panes and silicon sealent shall be paid separately) - Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm, sash 67 x 80 mm, & mullion 67 x 80 mm all having wall thickness of 2.3 + or - 0.2mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm) | Sqm | 8,962.64 |
| 9.165.1A | Providing and fixing of 65mm Navatal lock of 6 levers etc complete | Each | 597.51 |
| 9.165.1B | Providing and fixing of 65 mm Navatal lock of 7 levers with 3 keys etc complete | Each | 711.31 |
Other chapters in this schedule
- Earth Work (70)
- Concrete Work (72)
- Reinforced Concrete Work (131)
- Brick Work (57)
- Stone Work (50)
- Cladding Work (71)
- Steel Work (52)
- Flooring (91)
- Roofing (135)
- Finishing (114)
- Repairs To Buildings (108)
- Dismantling And Demolishing (85)
- Miscellaneous Building Work (25)
- Sanitary Installations (226)
- Water Supply (708)
- Drainage (135)
- Pile Work (31)
- Aluminium Work (41)
- Water Proofing (27)
- Rain Water Harvesting & TubeWells (37)
- Conservation of Heritage Buildings (7)
- Structural Glazing Aluminium Composite Panel (5)
- New Technologies and Materials (196)
- Irrigation (50)
- Water Supply (Public Health) (1012)
- Sewerage (Public Health) (213)
- Miscellaneous (Public Health) (71)
- OHT (Works) (8)
- Subsoil Exploration (7)
- Energy Conservation Building Code (137)
- Site Clearance and Dismantling (44)
- Earth Work, Erosion Control and Drainages (40)
- Granular Sub-base (63)
- Base & Bituminous Construction (26)
- Traffic Signs,Markings & Other Road Appurtenances (41)
- Pipe Culverts (5)
- Maintenance of Roads (13)
- Horticulture (25)
- Foundation (106)
- Substructure (54)
- Superstructure (97)
- River Training and Protection Works (10)
- Repair and Rehabilitation (12)
- PMGSY -Works (25)
Pricing wood and pvc work against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works