Puducherry SOR 2024-25
Finishing rates
114 finishing items from the Puducherry PWD, effective 2024-08-14.
Finishing rates in the Puducherry Puducherry Schedule of Rates 2024-25 run from ₹4.84 to ₹4,972.27. Transcribed from Puducherry PWD — Puducherry Schedule of Rates 2024-25, Puducherry region. Base PDF only; PWD has since issued Correction Slip-3 (22 January 2025) for all four regions, so some rates here may be superseded.. Reference only — verify against the official source before pricing a bid.
/
114 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 13.18 | Neat cement punning | Sqm | 78.09 |
| 13.19.1 | Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 fine aggregate) and top layer 10mm cement plaster 1:3 (1 cement: 3 fine aggregate) mixed with 10% finely grounded hydrated lime by volume of cement - Ordinary cement finish using ordinary cement | Sqm | 910.15 |
| 13.20 | Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size, dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 fine aggregate) and top layer 10mm cement plaster with cement mortar 1:3(1cement: 3 fine aggregate) mixed with 10% finely grounded hydrated lime by volume of cement | Sqm | 848.71 |
| 13.21 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers | Bag | 14.48 |
| 13.22 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof | Sqm | 74.32 |
| 13.23.1 | Extra for plastering on circular work not exceeding 6 m in radius - in one coat | Sqm | 50.37 |
| 13.23.2 | Extra for plastering on circular work not exceeding 6 m in radius - in two coat | Sqm | 76.04 |
| 13.24.1 | Extra for plastering done on moulding cornices or architraves including neat finish to line and level - in one coat | Sqm | 742.19 |
| 13.24.2 | Extra for plastering done on moulding cornices or architraves including neat finish to line and level - in two coats | Sqm | 1,219.63 |
| 13.25.1 | Extra for plastering - spherical ceiling | Sqm | 187.85 |
| 13.25.2 | Extra for plastering - groined ceiling | Sqm | 202.48 |
| 13.25.3 | Extra for plasteing - flewing soffits | Sqm | 125.12 |
| 13.26 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete | Sqm | 307.17 |
| 13.27 | Extra for lining out plaster to imitate stone or concrete blocks walling | Sqm | 123.03 |
| 13.31.1 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine aggregate) - flush / ruled/ struck or weathered pointing | Sqm | 238.87 |
| 13.31.2 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine aggregate) - raised and cut pointing | Sqm | 397.47 |
| 13.32.1 | Pointing on tile brick work with cement mortar 1:3 (1 cement: 3 fine aggregate) - flush/ruled/struck or weathered pointing | Sqm | 326.34 |
| 13.33.1 | Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine aggregate) - flush/ruled pointing | Sqm | 358.09 |
| 13.33.2 | Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine aggregate) - raised and cut pointing | Sqm | 661.50 |
| 13.34 | Raised and cut pointing on stone work in white cement mortar 1:3 (1 whitecement: 3 marble dust) | Sqm | 696.96 |
| 13.35.1 | Pointing on stone slab ceiling with cement mortar 1:2 (1 cement: 2 fine aggregate) - flush / ruled pointing | Sqm | 198.10 |
| 13.36 | Extra for pointing on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or part there of | Sqm | 4.84 |
| 13.37.1 | White washing with lime to give an even shade - new work (three or more coats) | Sqm | 35.17 |
| 13.38 | Satna lime wash on walls with one coat | Sqm | 13.62 |
| 13.39.1 | Colour washing such as green, blue or buff to give an even shade - New work (two or more coats) with a base coat of white washing with lime | Sqm | 46.72 |
| 13.39.2 | Colour washing such as green, blue or buff to give an even shade - New work (two or more coats) with a base coat of whiting | Sqm | 46.41 |
| 13.41.1 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour:N ew work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 197.32 |
| 13.44.1 | Finishing walls with water proofing cement paint of required shade - New work (Two or more coats applied @ 3.84 kg / 10 sqm) | Sqm | 122.92 |
| 13.45.1 | Finishing walls with textured exterior paint of required shade - New work (Two or more coats applied @ 3.28 ltr / 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm | Sqm | 235.04 |
| 13.46.1 | Finishing walls with acrylic smooth exterior paint of required shade - New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm | Sqm | 155.52 |
| 13.47.1 | Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade - New work (two or more coats applied @1.43 ltr / 10 sqm over and including priming coat of exterior primer applied @0.90 litre / 10sqm) | Sqm | 173.45 |
| 13.48.1 | Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacture's specification - Two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @ 0.75 ltr / 10 sqm | Sqm | 173.30 |
| 13.48A.1 | Finishing walls with ready mixed Premium acrylic emulsion paint (company depot tinted) having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali& fungal resistance, dire resistance exterior paint of required shade with silicon additives- New work (Two or more coats applied @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @0.90 litre / 10 sqm | Sqm | 186.40 |
| 13.48.2 | Painting wood work with deluxe multi surface paint of required shade. Two or more coat applied @0.90 ltr / 10sqm over an under coat of primer applied @ 0.75 ltr / 10 sqm of approved brand and manufacure | Sqm | 159.41 |
| 13.48.3 | Painting steel work with deluxe multi surface paint to give an even shade. Two or more coat applied @ 0.90 ltr / 10 sqm over an under coat of primer applied @ 0.80 ltr / 10 sqm of approved brand and manufacture | Sqm | 159.17 |
| 13.50.2 | Applying priming coat - with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood | Sqm | 83.43 |
| 13.50.3 | Applying priming coat - with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron / steel works | Sqm | 66.61 |
| 13.50.4 | Applying priming coat - with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) | Sqm | 35.86 |
| 13.51.1 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces - one coat | Sqm | 111.21 |
| 13.51.2 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces -two coats | Sqm | 177.22 |
| 13.52.1 | Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc.complete - on steel work | Sqm | 253.98 |
| 13.52.2 | Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc.complete - on concrete work | Sqm | 251.49 |
| 13.53.1 | Painting on G.S.sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution | Sqm | 181.60 |
| 13.54.1 | Applying a coat of mordant solution on G.S.sheet - with a solution of 38 gms of copper acetate in a litre of soft water | Sqm | 57.01 |
| 13.54.2 | Applying a coat of mordant solution on G.S.sheet - with a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water | Sqm | 56.90 |
| 13.55.1 | Painting (two or morecoats) on rain water, soil,waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work - 100 mm diameter pipes | Metre | 73.85 |
| 13.55.2 | Painting (two or morecoats) on rain water, soil,waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work - 150 mm diameter pipes | Metre | 109.92 |
| 13.56.1 | Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work - 100mm diametre pipes | Metre | 78.28 |
| 13.56.2 | Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work - 150mm diametre pipes | Metre | 116.48 |
| 13.57.1 | Painting with oil type wood preservative of approved brand and manufacture - New work (two or more coats) | Sqm | 53.38 |
| 13.58 | Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant | Sqm | 405.95 |
| 13.59 | Coal tarring two coats on new work using 0.16 litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively | Sqm | 72.46 |
| 13.61.1 | Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work | Sqm | 155.51 |
| 13.62.1 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacure | Sqm | 226.77 |
| 13.63.1 | Painting with aluminium paint of approved brand and manufacture to give an even shade - Two or more coats on new work | Sqm | 155.32 |
| 13.64.1 | Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade - Two or more coats on new work | Sqm | 169.21 |
| 13.67.1 | Varnishing with varnish of approved brand and manufacutre - Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish | Sqm | 260.59 |
| 13.67.2 | Varnishing with varnish of approved brand and manufacutre - Two or more coats of glue sizing with spar varnish or an under coat of flatting varnish | Sqm | 272.04 |
| 13.68.1 | French spirit polishing - Two or more coats on new works including a coat of wood filler | Sqm | 482.47 |
| 13.69.1 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture - New work | Sqm | 193.89 |
| 13.70 | Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture | Sqm | 92.00 |
| 13.72 | Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 fine aggregate), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 kg of cement per square metre,top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 fine aggregate: 2 stone chipping 10mm nominal size), in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in- charge (payment for providing grooves shallbe made separately) | Sqm | 1,179.73 |
| 13.73.1 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications - 15mm wide and 15mm deep groove | Metre | 164.85 |
| 13.73.2 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications - 20mm wide and 15mm deep groove | Metre | 195.67 |
| 13.74 | Extra for washed grit plaster on exterior walls of height more than 10m from ground level for every addiional height of 3m or part thereof | Sqm | 133.69 |
| 13.75 | Extra for washed stone grit plaster on circular work not exceeding 6 m in radius (in two coats) | Sqm | 134.21 |
| 13.76 | Forming groove of uniform size from 12x12 mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminium channels of appropriate size and thickness (not less than 2mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-charge | Metre | 135.21 |
| 13.77 | Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster | Sqm | 191.97 |
| 13.78 | Providing and applying 12mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregate as vermiculite / perlite respectively conforming to IS: 2547 (Part -I &II)1976,applied on hacked / uneven background such as bare brick /block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc.complete | Sqm | 705.12 |
| 13.80 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete | Sqm | 193.93 |
| 13.81.1 | Distempering with Ist quality acrylic distemper ready mixed, having VOC (Volatile Organic Compound) content less than 50 grams /litre, of approved brand and manufacutre, including applying additional coats wherever required, to achive even shade and colour -Old work (one or more coats) | Sqm | 63.60 |
| 13.82.1 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams / litre, of approved brand and manufacturer, including applying additional coats wherever required, to achive even shade and colour - One coat | Sqm | 98.92 |
| 13.82.2 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams / litre, of approved brand and manufacturer, including applying additional coats wherever required, to achive even shade and colour - Two coats | Sqm | 149.34 |
| 13.83.1 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams / litre of approved brand and manufacture, including applying additional coats wherever required to achive even shade and colour - One coat | Sqm | 94.33 |
| 13.83.2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams / litre of approved brand and manufacture, including applying additional coats wherever required to achive even shade and colour - Two coats | Sqm | 141.96 |
| 13.85.1 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content - with ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50grams / litre | Sqm | 72.23 |
| 13.85.3 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content - with water thinnable cement primer on wall surface having VOC content less than 50 grams / litre | Sqm | 82.59 |
| 13.87.1 | White washing with lime to give an even shade- Old work (two or more coats) | Sqm | 20.35 |
| 13.87.2 | White washing with lime to give an even shade-Old work(one or more coats) | Sqm | 12.26 |
| 13.88 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc., complete | Sqm | 17.82 |
| 13.91 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete | Sqm | 22.44 |
| 13.92.1 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade- Old work (one or more coats) | Sqm | 98.61 |
| 13.93.1 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture over and including a priming coat of ready mixed zinc chromate yellow primer on new work: 75 mm diameter pipes | Metre | 55.66 |
| 13.94.1 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work: 75 mm diameter pipes | Metre | 25.53 |
| 13.94.2 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work: 100 mm diameter pipes | Metre | 33.84 |
| 13.94.3 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work: 150 mm diameter pipes | Metre | 49.30 |
| 13.95.1 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approvad brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work- 75 mm diametre pipes | Metre | 58.76 |
| 13.95.2 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approvad brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work- 100 mm diametre pipres | Metre | 83.34 |
| 13.95.3 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approvad brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work- 150 mm diametre pipres | Metre | 123.99 |
| 13.96.1 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work - 75 mm diameter pipes | Metre | 27.67 |
| 13.96.2 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work - 100 mm diameter pipes | Metre | 35.67 |
| 13.96.3 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work - 150 mm diameter pipes | Metre | 51.92 |
| 13.97.1 | Painting with oil type wood preservative of approved brand and manufacture- old work (one or more coats) | Sqm | 40.59 |
| 13.99.1 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade- One or more coats on old work | Sqm | 101.84 |
| 13.100.1 | Painting with aluminium paint of approved brand and manufacture to give an even shade - one or more coats on old work | Sqm | 100.29 |
| 13.101.1 | Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade - one or more coats on old work | Sqm | 110.11 |
| 13.102.1 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade - one or more coats on old work | Sqm | 94.41 |
| 13.103.1 | French spirit polishing - one or more coats on old work | Sqm | 243.83 |
| 13.104.1 | Polishing on wood work with ready made wax polish of approved brand and manufacture - Old work | Sqm | 97.47 |
| 13.106 | Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade | Sqm | 91.89 |
| 13.107.1 | Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin- 32mm dia | Each | 107.03 |
| 13.107.2 | Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin- 40mm dia | Each | 107.03 |
| 13.109.1 | Finishing walls with water proofing cement paint of required shade- Old work (one or more coats applied @ 2.20 kg /10 sqm) over priming coat of primer applied @ 0.80 litres/10sqm complete including cost of priming coat | Sqm | 118.87 |
| 13.109.2 | Finishing walls with water proofing cement paint of required shade- Old work (one or more coats @ 2.20 kg/10 sqm) complete | Sqm | 80.21 |
| 13.110.1 | Finishing walls with textured exterior paint of require shade- Old work (two or more coats on existing cement paint surface applied @ 3.28 litre / 10 sqm | Sqm | 179.27 |
| 13.110.2 | Finishing walls with textured exterior paint of require shade- old work (one or more coats) applied @ 1.82 litre / 10 sqm | Sqm | 113.89 |
| 13.111.1 | Finishing walls with Acrylic Smooth exterior paint of require shade - Old work (two or more coat applied @ 1.67 litre / 10 sqm) on existing cement paint surface | Sqm | 115.62 |
| 13.111.2 | Finishing walls with Acrylic Smooth exterior paint of require shade - Old work (one or more coat applied @ 0.90 litre / 10 sqm) | Sqm | 77.43 |
| 13.112.1 | Finishing walls with Premium Acrylic exterior paint with Silicone additives of required shade - Old work (two or more coats applied @ 1.43 litre / 10 sqm) over existing cement paint surface | Sqm | 132.27 |
| 13.112.2 | Finishing walls with Premium Acrylic exterior paint with Silicone additives of required shade - Old work (one or more coats applied @ 0.83 litre / 10 sqm) | Sqm | 88.57 |
| 13.113.1 | Varnishing with varnish of approved brand and manufacture- one or more coats with copal varnish | Sqm | 103.27 |
| 13.113.2 | Varnishing with varnish of approved brand and manufacture- one or more coats with spar varnish | Sqm | 109.82 |
| 13.114 | Melamine polishing on wood work (one or more coat) | Sqm | 4,972.27 |
| 13.115 | Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work | Sqm | 105.39 |
Other chapters in this schedule
- Earth Work (70)
- Concrete Work (72)
- Reinforced Concrete Work (131)
- Brick Work (57)
- Stone Work (50)
- Cladding Work (71)
- Wood and PVC Work (493)
- Steel Work (52)
- Flooring (91)
- Roofing (135)
- Repairs To Buildings (108)
- Dismantling And Demolishing (85)
- Miscellaneous Building Work (25)
- Sanitary Installations (226)
- Water Supply (708)
- Drainage (135)
- Pile Work (31)
- Aluminium Work (41)
- Water Proofing (27)
- Rain Water Harvesting & TubeWells (37)
- Conservation of Heritage Buildings (7)
- Structural Glazing Aluminium Composite Panel (5)
- New Technologies and Materials (196)
- Irrigation (50)
- Water Supply (Public Health) (1012)
- Sewerage (Public Health) (213)
- Miscellaneous (Public Health) (71)
- OHT (Works) (8)
- Subsoil Exploration (7)
- Energy Conservation Building Code (137)
- Site Clearance and Dismantling (44)
- Earth Work, Erosion Control and Drainages (40)
- Granular Sub-base (63)
- Base & Bituminous Construction (26)
- Traffic Signs,Markings & Other Road Appurtenances (41)
- Pipe Culverts (5)
- Maintenance of Roads (13)
- Horticulture (25)
- Foundation (106)
- Substructure (54)
- Superstructure (97)
- River Training and Protection Works (10)
- Repair and Rehabilitation (12)
- PMGSY -Works (25)
Pricing finishing against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works