Puducherry SOR 2024-25
Water Supply rates
708 water supply items from the Puducherry PWD, effective 2024-08-14.
Water Supply rates in the Puducherry Puducherry Schedule of Rates 2024-25 run from ₹6.83 to ₹47,176.79. Transcribed from Puducherry PWD — Puducherry Schedule of Rates 2024-25, Puducherry region. Base PDF only; PWD has since issued Correction Slip-3 (22 January 2025) for all four regions, so some rates here may be superseded.. Reference only — verify against the official source before pricing a bid.
/
708 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 18.53A | Providing and fixing C.P.Brass extension nipple (size 15mm x 50mm) of approved make and quality as per direction of Engineer-in-charge | Nos | 76.36 |
| 18.1.1 | Providing and fixing Polythelene - Aluminium -Polythelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.Stabilized with carban black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows,tees,reducers,couplers & connectors etc., with clamps at 1.00 metre spacing.This includes testing of joints complete as per direction of Engineer- in-charge - Internal work -Exposed on wall - 1216 (16 mm OD) pipe | Metre | 347.33 |
| 18.6A.1 | Providing and fixing PPR Unions - PPR Union 20mm | Nos | 315.13 |
| 18.1.2 | Providing and fixing Polythelene - Aluminium -Polythelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.Stabilized with carban black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows,tees,reducers,couplers & connectors etc., with clamps at 1.00 metre spacing.This includes testing of joints complete as per direction of Engineer- in-charge - Internal work -Exposed on wall - 1620 (20 mm OD) pipe | Metre | 404.38 |
| 18.1.3 | Providing and fixing Polythelene - Aluminium -Polythelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.Stabilized with carban black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows,tees,reducers,couplers & connectors etc., with clamps at 1.00 metre spacing.This includes testing of joints complete as per direction of Engineer- in-charge- Internal work -Exposed on wall - 2025 (25 mm OD) pipe | Metre | 481.77 |
| 18.1.4 | Providing and fixing Polythelene - Aluminium -Polythelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.Stabilized with carban black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows,tees,reducers,couplers & connectors etc., with clamps at 1.00 metre spacing.This includes testing of joints complete as per direction of Engineer- in-charge - Internal work -Exposed on wall - 2532 (32 mm OD) pipe | Metre | 604.95 |
| 18.1.5 | Providing and fixing Polythelene - Aluminium -Polythelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.Stabilized with carban black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows,tees,reducers,couplers & connectors etc., with clamps at 1.00 metre spacing.This includes testing of joints complete as per direction of Engineer- in-charge - Internal work -Exposed on wall - 3240 (40 mm OD) pipe | Metre | 787.04 |
| 18.1.6 | Providing and fixing Polythelene - Aluminium -Polythelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.Stabilized with carban black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows,tees,reducers,couplers & connectors etc., with clamps at 1.00 metre spacing.This includes testing of joints complete as per direction of Engineer- in-charge - Internal work -Exposed on wall - 4050 (50 mm OD) pipe | Metre | 934.99 |
| 18.2.1 | Providing and fixing Polyethelene - Aluminium - Polyethelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows,tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing.This includes the cost of cutting chases and including testing of joints complete as perdirection -.Concealed work, including cutting chases and making good the wall etc- 1216 (16 mm OD) pipe | Metre | 611.58 |
| 18.2.2 | Providing and fixing Polyethelene - Aluminium - Polyethelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows,tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing.This includes the cost of cutting chases and including testing of joints complete as perdirection -.Concealed work, including cutting chases and making good the wall etc- 1620 (20 mm OD) pipe | Metre | 663.86 |
| 18.2.3 | Providing and fixing Polyethelene - Aluminium - Polyethelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows,tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing.This includes the cost of cutting chases and including testing of joints complete as perdirection -.Concealed work, including cutting chases and making good the wall etc- 2025 (25 mm OD) pipe | Metre | 743.53 |
| 18.2.4 | Providing and fixing Polyethelene - Aluminium - Polyethelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows,tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing.This includes the cost of cutting chases and including testing of joints complete as perdirection -.Concealed work, including cutting chases and making good the wall etc- 2532 (32 mm OD) pipe | Metre | 863.03 |
| 18.3.1 | Providing and fixing Polyethelene - Aluminium - Polyethelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temparature upto 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as perdirection - external work -1216 (16mm OD) pipe | Metre | 313.12 |
| 18.3.2 | Providing and fixing Polyethelene - Aluminium - Polyethelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temparature upto 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as perdirection - external work -1620 (20 mm OD) pipe | Metre | 351.96 |
| 18.3.3 | Providing and fixing Polyethelene - Aluminium - Polyethelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temparature upto 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints completeas perdirection - - external work -2025(25mm OD) pipe | Metre | 411.14 |
| 18.3.4 | Providing and fixing Polyethelene - Aluminium - Polyethelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temparature upto 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as perdirection - external work -2532 (32mm OD) pipe | Metre | 499.92 |
| 18.3.5 | Providing and fixing Polyethelene - Aluminium - Polyethelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temparature upto 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as perdirection - external work -3240 (40 mm OD) pipe | Metre | 637.41 |
| 18.3.6 | Providing and fixing Polyethelene - Aluminium - Polyethelene (PE-AL-PE) composite pressure pipes conforming to IS - 15450, U.V.stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temparature upto 80 degree C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints completeas perdirection - external work -4050 (50mm OD) pipe | Metre | 785.37 |
| 18.4.1 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings and fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-charge - Internal exposed on walls - PN-16 pipe, 20mm OD (SDR-7.4) | Metre | 282.32 |
| 18.4.2 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings and fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-charge - Internal exposed on walls - PN-16 pipe, 25mm OD (SDR-7.4) | Metre | 343.06 |
| 18.4.3 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings and fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-charge - Internal exposed on walls - PN-16 pipe, 32mm OD (SDR-7.4) | Metre | 415.45 |
| 18.4.4 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete - internal work - exposed on wall -PN - 16 pipe, 40 mm OD | Metre | 635.39 |
| 18.4.5 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings and fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-charge - Internal exposed on walls - PN-10 pipe, 50mm OD (SDR-11) | Metre | 719.82 |
| 18.5.1 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP-R plain & brass threaded polypropylene random fittings and fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge - Concealed work, including cutting chases and making good the wall etc - PN - 16 pipe, 20mm OD (SDR-7.4) | Metre | 499.54 |
| 18.5.2 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP-R plain & brass threaded polypropylene random fittings and fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge - Concealed work, including cutting chases and making good the wall etc - PN - 16 pipe, 25mm OD (SDR-7.4) | Metre | 556.81 |
| 18.5.3 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP-R plain & brass threaded polypropylene random fittings and fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge - Concealed work, including cutting chases and making good the wall etc - PN - 16 pipe, 32mm OD (SDR-7.4) | Metre | 617.27 |
| 18.6.1 | Providing and fixing 3 layer PP-R (poly propylene Random copolymer) pipes conforming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-charge of Engineer -in-charge - External work - PN - 16 pipe, 20mm OD(SDR-7.4) | Metre | 224.07 |
| 18.6.2 | Providing and fixing 3 layer PP-R (poly propylene Random copolymer) pipes conforming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-charge - External work - PN - 16 pipe, 25mm OD(SDR-7.4) | Metre | 278.06 |
| 18.6A.2 | Providing and fixing PPR Unions - PPR Union 25mm | Nos | 336.46 |
| 18.6.3 | Providing and fixing 3 layer PP-R (poly propylene Random copolymer) pipes conforming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-charge - External work - PN - 16 pipe, 32mm OD(SDR-7.4) | Metre | 344.63 |
| 18.7.1 | Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in- charge- internal work - exposed on wall - 15mm nominal dia pipes | Metre | 311.91 |
| 18.7.2 | Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in- charge - internal work - exposed on wall - 20 mm nominal dia pipes | Metre | 350.46 |
| 18.6A.3 | Providing and fixing PPR Unions - PPR Union 32mm | Nos | 411.86 |
| 18.6.4 | Providing and fixing 3 layer PP-R (poly propylene Random copolymer) pipes conforming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-charge - External work - PN - 16 pipe, 40mm OD(SDR-7.4) | Metre | 3,948.24 |
| 18.6A.4 | Providing and fixing PPR Unions - PPR Union 40mm | Nos | 564.09 |
| 18.6.5 | Providing and fixing 3 layer PP-R (poly propylene Random copolymer) pipes conforming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-charge - External work - PN - 10 pipe, 50mm OD(SDR-11) | Metre | 587.05 |
| 18.6A.5 | Providing and fixing PPR Unions - PPR Union 50mm | Nos | 824.42 |
| 18.6.6 | Providing and fixing 3 layer PP-R (poly propylene Random copolymer) pipes conforming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-charge - External work - PN - 10 pipe, 63mm OD(SDR-11) | Metre | 865.96 |
| 18.6A.6 | Providing and fixing PPR Unions - PPR Union 63mm | Nos | 966.69 |
| 18.6.7 | Providing and fixing 3 layer PP-R (poly propylene Random copolymer) pipes conforming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-charge - External work - PN - 10 pipe, 75mm OD(SDR-11) | Metre | 1,140.81 |
| 18.7.4 | Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints completeas per direction of Engineer-in- charge - internal work - exposed on wall - 32mm nominal dia pipes | Metre | 512.47 |
| 18.6A.7 | Providing and fixing PPR Unions - PPR Union 75mm | Nos | 1,807.47 |
| 18.6.8 | Providing and fixing 3 layer PP-R (poly propylene Random copolymer) pipes conforming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-charge - External work - PN - 10 pipe, 90mm OD(SDR-11) | Metre | 1,762.44 |
| 18.6.9 | Providing and fixing 3 layer PP-R (Poly propylene random copolymer) pipes UV stabilized & anti- microbial fusion welded, having thermal stability for hot & cold water supply, including all PP-R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete - external work - PN -10 pipe, 110mm OD (SDR - 11) | Metre | 1,835.84 |
| 18.6.10 | Providing and fixing 3 layer PP-R (Poly propylene random copolymer) pipes UV stabilized & anti- microbial fusion welded, having thermal stability for hot & cold water supply, including all PP-R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete - external work - PN -10 pipe, 160mm OD (SDR -11) | Metre | 3,695.58 |
| 18.7.3 | Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints completeas per direction of Engineer-in- charge - internal work - exposed on wall - 25mm nominal dia pipes | Metre | 391.15 |
| 18.7.5 | Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints completeas per direction of Engineer-in- charge - internal work - exposed on wall -40mm nominal dia pipes | Metre | 659.43 |
| 18.7.6 | Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in- charge- internal work - exposed on wall - 50mm nominal dia pipes | Metre | 901.71 |
| 18.8.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvement cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in- charge- Concealed work, including cutting chases and making good the wall etc - 15mm nominal dia pipes | Metre | 539.38 |
| 18.8.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvement cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in- charge - Concealed work, including cutting chases and making good the wall etc - 20 mm nominal dia pipes | Metre | 566.77 |
| 18.8.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvement cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in- charge - Concealed work, including cutting chases and making good the wall etc - 25 mm nominal dia pipes | Metre | 621.54 |
| 18.8.4 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvement cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in- charge- Concealed work, including cutting chases and making good the wall etc - 32 mm nominal dia pipes | Metre | 738.55 |
| 18.9.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge- external work - 15mm nominal dia pipes | Metre | 259.49 |
| 18.9.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge- external work - 20mm nominal dia pipes | Metre | 279.83 |
| 18.9.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge - external work - 25mm nominal dia pipes | Metre | 335.25 |
| 18.9.4 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge- external work - 32mm nominal dia pipes | Metre | 422.17 |
| 18.9.5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge- external work - 40 mm nominal outer dia pipes | Metre | 509.80 |
| 18.9.6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge- external work - 50 mm nominal dia pipes | Metre | 752.08 |
| 18.9.7 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge- external work - 65 mm nominal dia pipes | Metre | 1,690.24 |
| 18.9.8 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge- external work - 80 mm nominal dia pipes | Metre | 2,171.09 |
| 18.9.9 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge- external work - 100 mm nominal dia pipes | Metre | 3,010.23 |
| 18.9.10 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge- external work - 150mm nominal dia pipes | Metre | 5,185.08 |
| 18.9.11 | Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 20mm nominal outer dia pipes | Metre | 270.94 |
| 18.9.12 | Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 25mm nominal outer dia pipes | Metre | 289.43 |
| 18.9.13 | Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 32mm nominal outer dia pipes | Metre | 342.33 |
| 18.9.14 | Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 40mm nominal outer dia pipes | Metre | 444.90 |
| 18.9.15 | Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 50mm nominal outer dia pipes | Metre | 522.57 |
| 18.9.16 | Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 63mm nominal outer dia pipes | Metre | 563.26 |
| 18.9.21 | Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and the cost of cutting chases and making good the same including testing of joints complete (Concealed work including cutting chases and making good the walls etc.) - 20 mm nominal outer dia pipes | Metre | 443.71 |
| 18.9.22 | Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and the cost of cutting chases and making good the same including testing of joints complete (Concealed work including cutting chases and making good the walls etc.) - 25 mm nominal outer dia pipes | Metre | 462.20 |
| 18.9.23 | Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and the cost of cutting chases and making good the same including testing of joints complete (Concealed work including cutting chases and making good the walls etc.) - 32 mm nominal outer dia pipes | Metre | 480.70 |
| 18.9.31 | Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement, trenching refilling & testing of joints complete (External work) - 20 mm nominal outer dia pipes | Metre | 200.31 |
| 18.9.32 | Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement, trenching refilling & testing of joints complete (External work) - 25 mm nominal outer dia pipes | Metre | 218.80 |
| 18.9.33 | Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement, trenching refilling & testing of joints complete (External work) - 32 mm nominal outer dia pipes | Metre | 252.02 |
| 18.9.34 | Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement, trenching refilling & testing of joints complete (External work) - 40 mm nominal outer dia pipes | Metre | 295.27 |
| 18.9.35 | Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement, trenching refilling & testing of joints complete (External work) - 50 mm nominal outer dia pipes | Metre | 372.95 |
| 18.9.36 | Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement, trenching refilling & testing of joints complete (External work) - 63 mm nominal outer dia pipes | Metre | 460.37 |
| 18.9.37 | Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement, trenching refilling & testing of joints complete (External work) - 75 mm nominal outer dia pipes | Metre | 525.10 |
| 18.9.38 | Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement, trenching refilling & testing of joints complete (External work) - 100 mm nominal outer dia pipes | Metre | 692.90 |
| 18.10.1 | Providing and fixing G.I.pipes complete with G.I.fittings and clamps, including cutting and making good the walls etc - internal work -exposed on wall - 15mm dia nominal bore | Metre | 386.06 |
| 18.10.2 | Providing and fixing G.I.pipes complete with G.I.fittings and clamps, including cutting and making good the walls etc - internal work -exposed on wall - 20mm dia nominal bore | Metre | 453.35 |
| 18.10.3 | Providing and fixing G.I.pipes complete with G.I.fittings and clamps, including cutting and making good the walls etc - internal work -exposed on wall - 25mm dia nominal bore | Metre | 578.42 |
| 18.10.4 | Providing and fixing G.I.pipes complete with G.I.fittings and clamps, including cutting and making good the walls etc - internal work -exposed on wall - 32 mm dia nominal bore | Metre | 702.55 |
| 18.10.5 | Providing and fixing G.I.pipes complete with G.I.fittings and clamps, including cutting and making good the walls etc - internal work -exposed on wall - 40mm dia nominal bore | Metre | 849.88 |
| 18.10.6 | Providing and fixing G.I.pipes complete with G.I.fittings and clamps, including cutting and making good the walls etc - internal work -exposed on wall - 50 mm dia nominal bore | Metre | 1,102.61 |
| 18.11.1 | Providing & fixing GI pipes complete with GI fitttings and clamps including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall - 15mm dia nominal bore | Metre | 606.33 |
| 18.11.2 | Providing & fixing GI pipes complete with GI fitttings and clamps including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall - 20mm dia nominal bore | Metre | 657.86 |
| 18.12.1 | Providing and fixing G.I.pipes complete with G.I.fittings including trenching and refilling etc.- External work -15mm dia nominal bore | Metre | 329.17 |
| 18.12.2 | Providing and fixing G.I.pipes complete with G.I.fittings including trenching and refilling etc.- External work -20mm dia nominal bore | Metre | 372.70 |
| 18.12.3 | Providing and fixing G.I.pipes complete with G.I.fittings including trenching and refilling etc.- External work -25mm dia nominal bore | Metre | 482.00 |
| 18.12.4 | Providing and fixing G.I.pipes complete with G.I.fittings including trenching and refilling etc.- External work -32mm dia nominal bore | Metre | 561.81 |
| 18.12.5 | Providing and fixing G.I.pipes complete with G.I.fittings including trenching and refilling etc.- External work -40mm dia nominal bore | Metre | 641.26 |
| 18.12.6 | Providing and fixing G.I.pipes complete with G.I.fittings including trenching and refilling etc.- External work -50mm dia nominal bore | Metre | 800.88 |
| 18.12.7 | Providing and fixing G.I.pipes complete with G.I.fittings including trenching and refilling etc.- External work -65mm dia nominal bore | Metre | 942.66 |
| 18.12.8 | Providing and fixing G.I.pipes complete with G.I.fittings including trenching and refilling etc.- External work -80mm dia nominal bore | Metre | 1,102.28 |
| 18.13.1 | Making connection of G.I.distribution branch with G.I.main of following sizes by providing and fixing tee, including cutting and threading the pipe etc.complete - 25 to 40mm nominal bore | Each | 923.68 |
| 18.13.2 | Making connection of G.I.distribution branch with G.I.main of following sizes by providing and fixing tee, including cutting and threading the pipe etc.complete - 50 to 80mm nominal bore | Each | 1,791.48 |
| 18.14 | Fixing water meter and stop cock in G.I.pipe line including cutting and threading the pipe and making long screws etc.complete (cost of water meter and stop cock to be paid separately) | Each | 815.54 |
| 18.15.1 | Providing and fixing brass bib cock of approved quality - 15mm nominal bore | Each | 327.54 |
| 18.15.2 | Providing and fixing brass bib cock of approved quality - 20 mm nominal bore | Each | 415.48 |
| 18.16.1 | Providing and fixing brass stop cock of approved quality - 15mm nominal bore | Each | 479.77 |
| 18.16.2 | Providing and fixing brass stop cock of approved quality - 20mm nominal bore | Each | 581.92 |
| 18.17.1 | Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 25mm nominal bore | Each | 588.55 |
| 18.17.1A | Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) - 20 mm nominal bore | Nos | 212.04 |
| 18.17.2 | Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 32mm nominal bore | Each | 697.84 |
| 18.17.3 | Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 40mm nominal bore | Each | 916.41 |
| 18.17.4 | Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 50 mm nominal bore | Each | 1,328.49 |
| 18.17.5 | Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 65mm nominal bore | Each | 1,837.28 |
| 18.17.6 | Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 80mm nominal bore | Each | 2,614.72 |
| 18.18.1 | Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete - 15mm nominal bore | Each | 366.20 |
| 18.18.2 | Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete - 20mm nominal bore | Each | 510.98 |
| 18.18.3 | Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete - 25mm nominal bore | Each | 549.06 |
| 18.19.1.1 | Providing and fixing gun metal non -return valve of approved quality (screwed end) - 25mm nominal bore - horizontal | Each | 593.48 |
| 18.19.1.2 | Providing and fixing gun metal non -return valve of approved quality (screwed end) - 25mm nominal bore -vertical | Each | 365.86 |
| 18.19.2.1 | Providing and fixing gun metal non -return valve of approved quality (screwed end) - 32 mm nominal bore - Horizontal | Each | 752.33 |
| 18.19.2.2 | Providing and fixing gun metal non -return valve of approved quality (screwed end) - 32 mm nominal bore - Vertical | Each | 524.70 |
| 18.19.3.1 | Providing and fixing gun metal non -return valve of approved quality (screwed end) - 40 mm nominal bore - Horizontal | Each | 1,040.61 |
| 18.19.3.2 | Providing and fixing gun metal non -return valve of approved quality (screwed end) - 40 mm nominal bore - Vertical | Each | 655.08 |
| 18.19.4.1 | Providing and fixing gun metal non -return valve of approved quality (screwed end) - 50 mm nominal bore - Horizontal | Each | 1,515.52 |
| 18.19.4.2 | Providing and fixing gun metal non -return valve of approved quality (screwed end) - 50 mm nominal bore -Vertical | Each | 1,027.55 |
| 18.19.5.1 | Providing and fixing gun metal non -return valve of approved quality (screwed end) - 65 mm nominal bore - Horizontal | Each | 2,280.41 |
| 18.19.5.2 | Providing and fixing gun metal non -return valve of approved quality (screwed end) - 65 mm nominal bore - Vertical | Each | 1,243.30 |
| 18.19.6.1 | Providing and fixing gun metal non -return valve of approved quality (screwed end) - 80 mm nominal bore - Horizontal | Each | 3,544.88 |
| 18.19.6.2 | Providing and fixing gun metal non -return valve of approved quality (screwed end) - 80 mm nominal bore -Vertical | Each | 1,900.31 |
| 18.20.1 | Providing and fixing brass ferrule with C.I.mouth cover including boring and tapping the main - 15 mm nominal bore | Each | 277.67 |
| 18.20.2 | Providing and fixing brass ferrule with C.I.mouth cover including boring and tapping the main - 20 mm nominal bore | Each | 386.86 |
| 18.20.3 | Providing and fixing brass ferrule with C.I.mouth cover including boring and tapping the main - 25 mm nominal bore | Each | 398.84 |
| 18.21.1.1 | Providing and fixing unplasticised PVC connection pipe with brass unions - 30 cm length - 15mm nominal bore | Each | 121.66 |
| 18.21.1.2 | Providing and fixing unplasticised PVC connection pipe with brass unions - 30 cm length - 20 mm nominal bore | Each | 135.90 |
| 18.21.2.1 | Providing and fixing unplasticised PVC connection pipe with brass unions - 45 cm length - 15mm nominal bore | Each | 145.35 |
| 18.21.2.2 | Providing and fixing unplasticised PVC connection pipe with brass unions - 45 cm length - 20mm nominal bore | Each | 159.58 |
| 18.22.1 | Providing and fixing C.P.brass shower rose with 15 or 20 mm inlet - 100 mm diametre | Each | 296.75 |
| 18.22.2 | Providing and fixing C.P.brass shower rose with 15 or 20 mm inlet - 150 mm diametre | Each | 583.62 |
| 18.23 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe) | Quintal | 361.74 |
| 18.24 | Laying in position S&S or flanged C.I.special such as tees, bends, collars, tapers and caps etc (excluding cost of specials) | Quintal | 659.29 |
| 18.25.1 | Providing and laying S&S C.I. standard specials such as tees,bends, collars, tapers, caps etc (Heavy class) - upto 300mm dia | Quintal | 10,333.22 |
| 18.25.2 | Providing and laying S&S C.I. standard specials such as tees,bends, collars, tapers, caps etc (Heavy class) - over 300mm dia | Quintal | 11,898.11 |
| 18.26.1 | Providing and laying flanged C.I.standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS:1538 - upto 300 mm dia | Quintal | 17,588.67 |
| 18.26.2 | Providing and laying flanged C.I.standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS:1538 - Over 300 mm dia | Quintal | 19,295.83 |
| 18.27.1 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS -1536 - 100 mm dia pipe | Metre | 1,105.88 |
| 18.27.2 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS -1536 - 125 mm dia pipe | Metre | 1,385.08 |
| 18.27.3 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS -1536 - 150 mm dia pipe | Metre | 1,667.15 |
| 18.27.4 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS -1536 - 200 mm dia pipe | Metre | 2,233.20 |
| 18.27.5 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS -1536 - 250 mm dia pipe | Metre | 3,060.75 |
| 18.27.6 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS -1536 - 300 mm dia pipe | Metre | 4,492.68 |
| 18.27.7 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS -1536 - 350 mm dia pipe | Metre | 5,665.16 |
| 18.27.8 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS -1536 - 400 mm dia pipe | Metre | 7,851.69 |
| 18.27.9 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS -1536 - 450 mm dia pipe | Metre | 9,794.44 |
| 18.27.10 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS -1536 - 500 mm dia pipe | Metre | 11,552.25 |
| 18.27.11 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS -1536 - 600 mm dia pipe | Metre | 16,502.69 |
| 18.28.1 | Providing lead caulked joints to spun iron or C.I.pipes and specials including testing of joints but excluding the cost of pig lead - 100 mm diameter pipe | Joint | 478.99 |
| 18.28.2 | Providing lead caulked joints to spun iron or C.I.pipes and specials including testing of joints but excluding the cost of pig lead - 125 mm diameter pipe | Joint | 714.22 |
| 18.28.3 | Providing lead caulked joints to spun iron or C.I.pipes and specials including testing of joints but excluding the cost of pig lead - 150 mm diameter pipe | Joint | 718.12 |
| 18.28.4 | Providing lead caulked joints to spun iron or C.I.pipes and specials including testing of joints but excluding the cost of pig lead - 200 mm diameter pipe | Joint | 955.70 |
| 18.28.5 | Providing lead caulked joints to spun iron or C.I.pipes and specials including testing of joints but excluding the cost of pig lead - 250 mm diameter pipe | Joint | 1,195.15 |
| 18.28.6 | Providing lead caulked joints to spun iron or C.I.pipes and specials including testing of joints but excluding the cost of pig lead - 300 mm diameter pipe | Joint | 1,437.03 |
| 18.28.7 | Providing lead caulked joints to spun iron or C.I.pipes and specials including testing of joints but excluding the cost of pig lead - 350 mm diameter pipe | Joint | 1,450.23 |
| 18.28.8 | Providing lead caulked joints to spun iron or C.I.pipes and specials including testing of joints but excluding the cost of pig lead - 400 mm diameter pipe | Joint | 1,920.23 |
| 18.28.9 | Providing lead caulked joints to spun iron or C.I.pipes and specials including testing of joints but excluding the cost of pig lead - 450 mm diameter pipe | Joint | 2,157.81 |
| 18.28.10 | Providing lead caulked joints to spun iron or C.I.pipes and specials including testing of joints but excluding the cost of pig lead - 500 mm diameter pipe | Joint | 2,279.41 |
| 18.28.11 | Providing lead caulked joints to spun iron or C.I.pipes and specials including testing of joints but excluding the cost of pig lead - 600 mm diameter pipe | Joint | 3,104.28 |
| 18.29 | Supplying pig lead at site of work | Quintal | 28,452.73 |
| 18.30.1 | Providing flanged joints to double flanged C.I / D.I. pipes and specials, including testing of joints - 80mm diameter pipe | Joint | 417.54 |
| 18.30.2 | Providing flanged joints to double flanged C.I / D.I. pipes and specials, including testing of joints -100mm diameter pipe | Joint | 724.83 |
| 18.30.3 | Providing flanged joints to double flanged C.I / D.I. pipes and specials, including testing of joints - 125mm diameter pipe | Joint | 808.77 |
| 18.30.4 | Providing flanged joints to double flanged C.I / D.I. pipes and specials, including testing of joints - 150mm diameter pipe | Joint | 1,182.92 |
| 18.30.5 | Providing flanged joints to double flanged C.I / D.I. pipes and specials, including testing of joints - 200mm diameter pipe | Joint | 1,255.48 |
| 18.30.6 | Providing flanged joints to double flanged C.I / D.I. pipes and specials, including testing of joints - 250mm diameter pipe | Joint | 1,955.42 |
| 18.30.7 | Providing flanged joints to double flanged C.I / D.I. pipes and specials, including testing of joints -300mm diameter pipe | Joint | 1,990.98 |
| 18.30.8 | Providing flanged joints to double flanged C.I / D.I. pipes and specials, including testing of joints -350mm diameter pipe | Joint | 2,791.92 |
| 18.30.9 | Providing flanged joints to double flanged C.I / D.I. pipes and specials, including testing of joints - 400mm diameter pipe | Joint | 2,969.75 |
| 18.30.10 | Providing flanged joints to double flanged C.I / D.I. pipes and specials, including testing of joints - 450mm diameter pipe | Joint | 3,811.96 |
| 18.30.11 | Providing flanged joints to double flanged C.I / D.I. pipes and specials, including testing of joints - 500mm diameter pipe | Joint | 5,613.01 |
| 18.30.12 | Providing flanged joints to double flanged C.I / D.I. pipes and specials, including testing of joints - 600 mm diameter pipe | Joint | 5,999.97 |
| 18.31.1.1 | Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber insertions etc. (the tail pieces if required will be paid separately) -100 mm diameter -class I | Each | 9,459.54 |
| 18.31.1.2 | Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber insertions etc. (the tail pieces if required will be paid separately) -100 mm diameter -class II | Each | 9,823.18 |
| 18.31.2.1 | Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber insertions etc. (the tail pieces if required will be paid separately) -125 mm diameter -class I | Each | 11,745.16 |
| 18.31.2.2 | Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber insertions etc. (the tail pieces if required will be paid separately) -125 mm diameter -class II | Each | 12,393.33 |
| 18.31.3.1 | Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber insertions etc. (the tail pieces if required will be paid separately) -150 mm diameter -class I | Each | 14,549.29 |
| 18.31.3.2 | Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber insertions etc. (the tail pieces if required will be paid separately) -150 mm diameter -class II | Each | 14,926.11 |
| 18.31.4.1 | Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber insertions etc. (the tail pieces if required will be paid separately) -200 mm diameter -class I | Each | 21,446.34 |
| 18.31.4.2 | Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber insertions etc. (the tail pieces if required will be paid separately) -200 mm diameter -class II | Each | 22,348.86 |
| 18.31.5.1 | Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber insertions etc. (the tail pieces if required will be paid separately) -250 mm diameter -class I | Each | 35,333.61 |
| 18.31.5.2 | Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber insertions etc. (the tail pieces if required will be paid separately) -250 mm diameter -class II | Each | 36,659.11 |
| 18.31.6.1 | Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber insertions etc. (the tail pieces if required will be paid separately) -300 mm diameter -class I | Each | 45,294.41 |
| 18.31.6.2 | Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber insertions etc. (the tail pieces if required will be paid separately) -300 mm diameter -class II | Each | 46,976.95 |
| 18.32.1 | Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1.4 (1 cement: 4 fine aggregate) for stop cock, with C.I.surface box 100x100x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement: 1.5fine aggregate: 3 graded stone aggregate 20mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement:5 fine aggregate: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 fine aggregate) 12mm thick, finished with a floating coat of neat cement complete as per standard design - with common burnt clay F.P.S (non modular) bricks of class designation 3.5 | Each | 2,157.94 |
| 18.33.1 | Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1.4 (1 cement: 4 fine aggregate) for sluice valve, with C.I.surface box 100mm top diameter,160mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement:1.5 coarse sand: 3 graded stone aggregate 20mm nominal size), including neceaasry excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design: with common burnt clay F.P.S (non moduar) bricks of class designation 3.5 | Each | 11,891.44 |
| 18.34.1 | Constructing masonry chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 fine aggregate) for sluice valve, with C.I.surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement: 1.5 fine aggregate: 3 graded stone aggregate 20mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine aggregate: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 fine aggregate) 12mm thick finished with a floating coat of neat cement complete as per standard design - with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 | Each | 20,769.07 |
| 18.35.1 | Constructing masonry chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1cement: 4 fine aggregate) for sluice valve, with C.I.surface box 100mm top diameter, 160mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement:1.5 fine aggregate: 3 graded stone aggregate 20mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine aggregate: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 fine aggregate) 12mm thick, finished with a floating coat of neat cement complete as per standard design - with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 | Each | 28,535.99 |
| 18.36.1 | Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 fine aggregate) for fire hydrants, with C.I. surface box 350 x 350 mm top and 165 mm deep (inside) with chained lid and RCC to slab 1:1.5:3 mix (1 cement: 1.5 fine aggregate: 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine aggregate: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 fine aggregate) 12mm thick, finished with a floating coat of neat cement complete as per standard design - with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 | Each | 11,230.05 |
| 18.37.1 | Constructing masonry chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 fine aggregate) for water meter complete with C.I.double flap surface box 400 x 200 x 200 mm (inside) with locking arrangement and RCC top slab 1:1.5:3 mix (1 cement: 1.5 fine aggregate: 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine aggregate: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cemnt: 3 fine aggregate) 12 mm thick, finished with a floating coat of neat cement complete as per standard design - with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 | Each | 10,478.30 |
| 18.38.1 | Painting G.I.pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work - 15mm diameter pipe | Metre | 17.39 |
| 18.38.2 | Painting G.I.pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work - 20mm diameter pipe | Metre | 21.21 |
| 18.38.3 | Painting G.I.pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work - 25 mm diameter pipe | Metre | 27.23 |
| 18.38.4 | Painting G.I.pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work - 32 mm diameter pipe | Metre | 33.30 |
| 18.38.5 | Painting G.I.pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work - 40 mm diameter pipe | Metre | 38.63 |
| 18.38.6 | Painting G.I.pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work - 50 mm diameter pipe | Metre | 46.93 |
| 18.39.1 | Repainting G.I.pipes and fitings with synthetic enamel white paint with one coat of approved quality - 15mm diameter pipe | Metre | 8.31 |
| 18.39.2 | Repainting G.I.pipes and fitings with synthetic enamel white paint with one coat of approved quality - 20mm diameter pipe | Metre | 10.06 |
| 18.39.3 | Repainting G.I.pipes and fitings with synthetic enamel white paint with one coat of approved quality - 25mm diameter pipe | Metre | 12.76 |
| 18.39.4 | Repainting G.I.pipes and fitings with synthetic enamel white paint with one coat of approved quality - 32 mm diameter pipe | Metre | 15.56 |
| 18.39.5 | Repainting G.I.pipes and fitings with synthetic enamel white paint with one coat of approved quality - 40 mm diameter pipe | Metre | 17.92 |
| 18.39.6 | Repainting G.I.pipes and fitings with synthetic enamel white paint with one coat of approved quality - 50mm diameter pipe | Metre | 21.73 |
| 18.40.1 | Painting G.I.pipes and fittings with two coats of anti - corrosive bitumastic paint of approved quality - 15 mm diameter pipe | Metre | 11.08 |
| 18.40.2 | Painting G.I.pipes and fittings with two coats of anti - corrosive bitumastic paint of approved quality - 20 mm diameter pipe | Metre | 13.54 |
| 18.40.3 | Painting G.I.pipes and fittings with two coats of anti - corrosive bitumastic paint of approved quality - 25 mm diameter pipe | Metre | 17.11 |
| 18.40.4 | Painting G.I.pipes and fittings with two coats of anti - corrosive bitumastic paint of approved quality - 32 mm diameter pipe | Metre | 21.02 |
| 18.40.5 | Painting G.I.pipes and fittings with two coats of anti - corrosive bitumastic paint of approved quality - 40 mm diameter pipe | Metre | 23.93 |
| 18.40.6 | Painting G.I.pipes and fittings with two coats of anti - corrosive bitumastic paint of approved quality - 50 mm diameter pipe | Metre | 29.28 |
| 18.40.7 | Painting G.I.pipes and fittings with two coats of anti - corrosive bitumastic paint of approved quality - 65 mm diameter pipe | Metre | 36.56 |
| 18.40.8 | Painting G.I.pipes and fittings with two coats of anti - corrosive bitumastic paint of approved quality - 80 mm diameter pipe | Metre | 42.64 |
| 18.41.1 | Providing and filling sand of grading zone V or coarser grade, all -round the G.I.pipes in external work - 15mm diametre pipe | Metre | 193.02 |
| 18.41.3 | Providing and filling sand of grading zone V or coarser grade, all -round the G.I.pipes in external work - 25mm diametre pipe | Metre | 200.85 |
| 18.41.4 | Providing and filling sand of grading zone V or coarser grade, all -round the G.I.pipes in external work - 32mm diametre pipe | Metre | 206.06 |
| 18.41.8 | Providing and filling sand of grading zone V or coarser grade, all -round the G.I.pipes in external work - 80mm diametre pipe | Metre | 352.14 |
| 18.41.9 | Providing and filling sand of grading zone V or coarser grade, all -round the G.I.pipes in external work - 100 mm diametre pipe | Metre | 373.00 |
| 18.41.10 | Providing and filling sand of grading zone V or coarser grade, all -round the G.I.pipes in external work - 150 mm diametre pipe | Metre | 555.59 |
| 18.42.1 | Boring with 100 mm diameter casing pipe for hand pump / tube well in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested - upto 6 metres depth | Metre | 762.76 |
| 18.42.2 | Boring with 100 mm diameter casing pipe for hand pump / tube well in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested - beyond 6 m and upto 12 m depth | Metre | 902.89 |
| 18.42.3 | Boring with 100 mm diameter casing pipe for hand pump / tube well in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested - beyond 12 m and upto 18 m depth | Metre | 1,047.29 |
| 18.43 | Providing and placing in position filters of 40mm diameter G.I.pipe with brass strainer of approved quality | Metre | 754.55 |
| 18.44 | Providing and fixing to filter and lowering to proper levels 40mm G.I.pipe for tube well including cleaning and priming the tube well | Metre | 581.90 |
| 18.45 | Providing and placing in position hand pump of approved quality for 40mm diameter G.I.pipe complete with all accessories | Each | 1,870.22 |
| 18.46.1 | Providing and fixing G.I.union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (New work) - 15mm nominal bore | Each | 344.02 |
| 18.46.2 | Providing and fixing G.I.union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (New work) - 20 mm nominal bore | Each | 358.24 |
| 18.46.3 | Providing and fixing G.I.union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (New work) - 25mm nominal bore | Each | 393.81 |
| 18.46.4 | Providing and fixing G.I.union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (New work) - 32 mm nominal bore | Each | 443.60 |
| 18.46.5 | Providing and fixing G.I.union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (New work) - 40 mm nominal bore | Each | 543.18 |
| 18.46.6 | Providing and fixing G.I.union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (New work) - 50 mm nominal bore | Each | 733.82 |
| 18.46.7 | Providing and fixing G.I.union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (New work) - 65 mm nominal bore | Each | 782.17 |
| 18.46.8 | Providing and fixing G.I.union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (New work) - 80 mm nominal bore | Each | 840.51 |
| 18.47.1 | Providing and fixing G.I.Union in existing G.I.pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required - 15 mm nominal bore | Each | 860.43 |
| 18.47.2 | Providing and fixing G.I.Union in existing G.I.pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required - 20 mm nominal bore | Each | 874.66 |
| 18.47.3 | Providing and fixing G.I.Union in existing G.I.pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required - 25 mm nominal bore | Each | 910.22 |
| 18.47.4 | Providing and fixing G.I.Union in existing G.I.pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required - 32 mm nominal bore | Each | 960.02 |
| 18.47.5 | Providing and fixing G.I.Union in existing G.I.pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required - 40mm nominal bore | Each | 1,059.60 |
| 18.47.6 | Providing and fixing G.I.Union in existing G.I.pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required - 50 mm nominal bore | Each | 1,438.02 |
| 18.47.7 | Providing and fixing G.I.Union in existing G.I.pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required - 65 mm nominal bore | Each | 1,486.39 |
| 18.47.8 | Providing and fixing G.I.Union in existing G.I.pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required - 80 mm nominal bore | Each | 1,544.71 |
| 18.48 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | Litre | 13.98 |
| 18.48A | Providing and fixing rectangular high density polyethylene water storage loft tank with cover ISI: 12701 marked, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support including fittings and fixtures for tank shall be paid separately | Litre | 13.98 |
| 18.49.1 | Providing and fixing C.P.brass bib cock of approved quality conforming to IS: 8931 - 15 mm nominal bore | Each | 641.17 |
| 18.50.1 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms - 15mm nominal bore | Each | 722.20 |
| 18.51.1 | Providing and fixing C.P.brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms - 15 mm nominal bore | Each | 787.67 |
| 18.52.1 | Providing and fixing C.P.brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 - 15 mm nominal bore | Each | 1,019.60 |
| 18.53.1 | Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931- 15 mm nominal bore | Each | 448.64 |
| 18.54.1 | Providing and fixing PTMT bib cock of approved quality and colour - 15mm nominal bore, 86 mm long, weighing not less than 88gms | Each | 190.97 |
| 18.72A.1 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 100mm nominal dia pipe | Metre | 2,030.65 |
| 18.54.2 | Providing and fixing PTMT bib cock of approved quality and colour - 15mm nominal bore, 122 mm long, weighing not less than 99 gms | Each | 344.62 |
| 18.54.3 | Providing and fixing PTMT bib cock of approved quality and colour - 15mm nominal bore,165 mm long, weighing not less than 110gms | Each | 253.57 |
| 18.54.4 | Providing and fixing PTMT bib cock of approved quality and colour - 15mm nominal bore, 90 mm long, weighing not less than 93 gms | Each | 189.55 |
| 18.55.1 | Providing and fixing PTMT stop cock of approved quality and colour - 15mm nominal bore, 86mm long, weighing not less than 88 gms | Each | 142.60 |
| 18.55.2 | Providing and fixing PTMT stop cock of approved quality and colour - 20 mm nominal bore, 89mm long, weighing not less than 88 gms | Each | 173.90 |
| 18.55.3 | Providing and fixing PTMT stop cock of approved quality and colour - Concealed stop cock, 15mm nominal bore, 108 mm long, weighing not less than 108 gms | Each | 304.78 |
| 18.56.1 | Providing and fixing PTMT pillar cock of approved quality and colour - 15 mm nominal bore, 107 mm long, weighing not less than 110 gms | Each | 256.15 |
| 18.56.2 | Providing and fixing PTMT pillar cock of approved quality and colour - 15mm nominal bore, 125 mm long foam flow, weighing not less than120 gms | Each | 212.04 |
| 18.57.1 | Providing and fixing PTMT, push cock of approved quality and colour - 15 mm nominal bore, 98 mm long, weighing not less than 75 gms | Each | 213.74 |
| 18.57.2 | Providing and fixing PTMT, push cock of approved quality and colour - 15 mm nominal bore, 80 mm long, weighing not less than 46 gms | Each | 213.74 |
| 18.58.1.1 | Providing and fixing PTMT grating of approved quality and colour - circular type - 100mm nominal dia | Each | 85.75 |
| 18.58.1.2 | Providing and fixing PTMT grating of approved quality and colour - circular type - 125 mm nominal dia with 25mm waste hole | Each | 67.27 |
| 18.58.2.1 | Providing and fixing PTMT grating of approved quality and colour - rectangular type with openable cirucular lid - 150mm nominal size square 100mm diametre of the inner hinged round grating | Each | 185.35 |
| 18.59.1 | Providing and fixing C.I.double acting air valve of approved quality with bolts, nuts, rubber insertions etc.complete (The tail pieces, tappers etc. If required will be paid separately) - 50 mm dia | Each | 5,595.88 |
| 18.59.2 | Providing and fixing C.I.double acting air valve of approved quality with bolts, nuts, rubber insertions etc.complete (The tail pieces, tappers etc. If required will be paid separately) - 80 mm dia | Each | 6,719.76 |
| 18.59.3 | Providing and fixing C.I.double acting air valve of approved quality with bolts, nuts, rubber insertions etc.complete (The tail pieces, tappers etc. If required will be paid separately) - 100 mm dia | Each | 8,957.07 |
| 18.60.1 | Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal board complete with bolts, nuts, rubber insertion etc.(The tail pieces if required will be paid separately) - 80mm dia nominal bore | Each | 3,473.42 |
| 18.68A.1 | Providing and laying Class K-12 ductile iron double chamber restained joint(bolt less0 specials such as tees, bends, collars, tapers and caps etc. conforming to IS 9523including testing of joints all complete - Upto 600mm nominal dia | Quintal | 33,066.96 |
| 18.60.2 | Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal board complete with bolts, nuts, rubber insertion etc.(The tail pieces if required will be paid separately) - 100mm dia nominal bore | Each | 6,185.68 |
| 18.60.3 | Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal board complete with bolts, nuts, rubber insertion etc.(The tail pieces if required will be paid separately) - 150mm dia nominal bore | Each | 9,114.20 |
| 18.60.4 | Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal board complete with bolts, nuts, rubber insertion etc.(The tail pieces if required will be paid separately) - 200mm dia nominal bore | Each | 10,156.32 |
| 18.61.1 | Providing and fixing C.I.dirt box strainer for bulk type water meter with nuts,bolts, rubber insertions etc. complete conforming to IS:2373 - 80mm dia | Each | 4,092.27 |
| 18.61.2 | Providing and fixing C.I.dirt box strainer for bulk type water meter with nuts,bolts, rubber insertions etc. complete conforming to IS:2373 - 100mm dia | Each | 7,077.67 |
| 18.73.1 | Providing and laying double flanged (screwed / welded) centrifugally (spun) ductile iron pipes of class K-9 conforming to IS:8329 - 100 mm dia ductile iron double flanged | Metre | 3,512.19 |
| 18.77 | Cutting holes upto 15x15 cm in R.C.C floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc with cement concrete 1:2:4 (1 cement: 2 fine aggregate: 4 graded stone aggregate 20 mm nominal size)including finishing complete so as to make it leak proof | Each | 456.73 |
| 18.85A.1 | Providing and fixing Stainless Steel pipe and fitting of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge. (The pipe length inserted in the fitting shall not be measured for payment) - Internal work-Exposed on wall- 15mm outer dia pipe | Metre | 748.45 |
| 18.68A.2 | Providing and laying Class K-12 ductile iron double chamber restained joint(bolt less0 specials such as tees, bends, collars, tapers and caps etc. conforming to IS 9523including testing of joints all complete - above 600mm nominal dia | Quintal | 42,526.06 |
| 18.72A.2 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 150mm nominal dia pipe | Metre | 2,813.35 |
| 18.61.3 | Providing and fixing C.I.dirt box strainer for bulk type water meter with nuts,bolts, rubber insertions etc. complete conforming to IS:2373 - 150 mm dia | Each | 9,496.89 |
| 18.61.4 | Providing and fixing C.I.dirt box strainer for bulk type water meter with nuts,bolts, rubber insertions etc. complete conforming to IS:2373 - 200 mm dia | Each | 12,657.31 |
| 18.62.1 | Providing and fixing PTMT Ball cock of approved quality colour and make complete with Epoxy coatd aliminium rod with L.P / H.P.H.D.plastic ball - 15mm nominal bore, 105 mm long, weighing not less than 138 gms | Each | 223.94 |
| 18.62.2 | Providing and fixing PTMT Ball cock of approved quality colour and make complete with Epoxy coatd aliminium rod with L.P / H.P.H.D.plastic ball - 20 mm nominal bore, 120 mm long, weighing not less than 198 gms | Each | 318.93 |
| 18.62.3 | Providing and fixing PTMT Ball cock of approved quality colour and make complete with Epoxy coatd aliminium rod with L.P / H.P.H.D.plastic ball - 25 mm nominal bore, 152 mm long, weighing not less than 440 gms | Each | 661.44 |
| 18.62.4 | Providing and fixing PTMT Ball cock of approved quality colour and make complete with Epoxy coatd aliminium rod with L.P / H.P.H.D.plastic ball - 40 mm nominal bore, 206 mm long, weighing not less than 690 gms | Each | 1,196.36 |
| 18.62.5 | Providing and fixing PTMT Ball cock of approved quality colour and make complete with Epoxy coatd aliminium rod with L.P / H.P.H.D.plastic ball - 50 mm nominal bore, 242 mm long, weighing not less than 1240 gms | Each | 1,543.47 |
| 18.63 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms | Each | 173.90 |
| 18.64 | Providing and fixing PTMT swivelling shower, 15mm nominal bore, weighing not less than 40 gms | Each | 136.00 |
| 18.65 | Providing and fixing PTMT Soap dish holder having length of 138 mm, breadth 102 mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms | Each | 178.67 |
| 18.66.1 | Providing and laying S&S C.I.standard specials such as tees, bends, collars, tapers and caps etc, suitable for flanged jointing as per IS:1538 - Upto 300 mm dia | Quintal | 8,014.32 |
| 18.66.2 | Providing and laying S&S C.I.standard specials such as tees, bends, collars, tapers and caps etc, suitable for flanged jointing as per IS:1538 - above 300 mm dia | Quintal | 8,014.32 |
| 18.67.1 | Providing and laying S&S C.I.Standard specials suitable for mechanical jointing as per IS:13382 - upto 300 mm dia | Quintal | 8,014.32 |
| 18.67.2 | Providing and laying S&S C.I.Standard specials suitable for mechanical jointing as per IS:13382 - above 300 mm dia | Quintal | 8,732.75 |
| 18.68.1 | Providing and laying D.I.specials of class K - 12 suitable for push - on jointing as per IS:9523 - upto 600 mm dia | Quintal | 16,332.48 |
| 18.68.2 | Providing and laying D.I.specials of class K - 12 suitable for push - on jointing as per IS:9523 - above 600 mm dia | Quintal | 17,537.44 |
| 18.69.1 | Providing and laying D.I.specials of class K -12 suitable for mechanical jointing as per IS:9523 - upto 600 mm dia | Quintal | 16,332.48 |
| 18.69.2 | Providing and laying D.I.specials of class K -12 suitable for mechanical jointing as per IS:9523 - above 600 mm dia | Quintal | 17,537.44 |
| 18.70.1 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 100 mm dia pipes | Joint | 112.39 |
| 18.70.2 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 150 mm dia pipes | Joint | 190.63 |
| 18.70.3 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 200 mm dia pipes | Joint | 275.99 |
| 18.70.4 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 250 mm dia pipes | Joint | 338.59 |
| 18.70.5 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 300 mm dia pipes | Joint | 436.75 |
| 18.70.6 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 350 mm dia pipes | Joint | 506.46 |
| 18.70.7 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 400 mm dia pipes | Joint | 591.82 |
| 18.70.8 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 450 mm dia pipes | Joint | 678.60 |
| 18.70.9 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 500 mm dia pipes | Joint | 758.27 |
| 18.70.10 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 600 mm dia pipes | Joint | 1,092.58 |
| 18.70.11 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 700 mm dia pipes | Joint | 1,201.84 |
| 18.70.12 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 750 mm dia pipes | Joint | 1,327.04 |
| 18.70.13 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 800 mm dia pipes | Joint | 1,493.77 |
| 18.70.14 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 900 mm dia pipes | Joint | 1,692.94 |
| 18.70.15 | Providing push -on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket - 1000 mm dia pipes | Joint | 2,004.49 |
| 18.71.1 | Providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron, class B (IS:1536) - 100mm dia C.I. double flanged pipe | Metre | 1,520.30 |
| 18.71.2 | Providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron, class B (IS:1536) - 150mm dia C.I. double flanged pipe | Metre | 2,350.75 |
| 18.71.3 | Providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron, class B (IS:1536) - 200mm dia C.I. double flanged pipe | Metre | 3,288.73 |
| 18.71.4 | Providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron, class B (IS:1536) - 250 mm dia C.I. double flanged pipe | Metre | 4,363.43 |
| 18.71.5 | Providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron, class B (IS:1536) - 300mm dia C.I. double flanged pipe | Metre | 5,547.85 |
| 18.71.6 | Providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron, class B (IS:1536) - 350 mm dia C.I. double flanged pipe | Metre | 7,078.04 |
| 18.71.7 | Providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron, class B (IS:1536) - 400 mm dia C.I. double flanged pipe | Metre | 9,139.19 |
| 18.71.8 | Providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron, class B (IS:1536) - 450 mm dia C.I. double flanged pipe | Metre | 11,825.82 |
| 18.71.9 | Providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron, class B (IS:1536) - 500 mm dia C.I. double flanged pipe | Metre | 16,498.35 |
| 18.71.10 | Providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron, class B (IS:1536) - 600 mm dia C.I. double flanged pipe | Metre | 20,346.50 |
| 18.72.1 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 100 mm dia Ductile iron class K-7 pipes | Metre | 1,674.67 |
| 18.72.2 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 150 mm dia Ductile iron class K-7 pipes | Metre | 2,380.04 |
| 18.72.3 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 200 mm dia Ductile iron class K-7 pipes | Metre | 3,675.43 |
| 18.72.4 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 250 mm dia Ductile iron class K-7 pipes | Metre | 4,121.28 |
| 18.72.5 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 300 mm dia Ductile iron class K-7 pipes | Metre | 5,194.14 |
| 18.72.6 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 350 mm dia Ductile iron class K-7 pipes | Metre | 6,407.30 |
| 18.72.7 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 400 mm dia Ductile iron class K-7 pipes | Metre | 7,690.91 |
| 18.72.8 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 450 mm dia Ductile iron class K-7 pipes | Metre | 9,086.95 |
| 18.72.9 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 500 mm dia Ductile iron class K-7 pipes | Metre | 10,699.72 |
| 18.72.10 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 600 mm dia Ductile iron class K-7 pipes | Metre | 14,101.77 |
| 18.72.11 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 700 mm dia Ductile iron class K-7 pipes | Metre | 17,612.69 |
| 18.72.12 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 800 mm dia Ductile iron class K-7 pipes | Metre | 23,526.35 |
| 18.72.13 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 900 mm dia Ductile iron class K-7 pipes | Metre | 28,017.15 |
| 18.72.14 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 1000 mm dia Ductile iron class K-7 pipes | Metre | 32,984.35 |
| 18.72.15 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 100 mm dia Ductile iron class K-9 pipes | Metre | 1,898.02 |
| 18.72.16 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 150 mm dia Ductile iron class K-9 pipes | Metre | 2,755.36 |
| 18.72.17 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 200 mm dia Ductile iron class K-9 pipes | Metre | 3,697.32 |
| 18.72.18 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 250 mm dia Ductile iron class K-9 pipes | Metre | 4,963.65 |
| 18.72.19 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 300 mm dia Ductile iron class K-9 pipes | Metre | 6,266.44 |
| 18.72.20 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 350 mm dia Ductile iron class K-9 pipes | Metre | 7,669.05 |
| 18.72.21 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 400 mm dia Ductile iron class K-9 pipes | Metre | 9,200.26 |
| 18.72.22 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 450 mm dia Ductile iron class K-9 pipes | Metre | 11,049.85 |
| 18.72.23 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 500 mm dia Ductile iron class K-9 pipes | Metre | 12,779.87 |
| 18.72.24 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 600 mm dia Ductile iron class K-9 pipes | Metre | 16,915.01 |
| 18.72.25 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 700 mm dia Ductile iron class K-9 pipes | Metre | 19,591.33 |
| 18.72.26 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 750 mm dia Ductile iron class K-9 pipes | Metre | 21,962.46 |
| 18.72.27 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 800 mm dia Ductile iron class K-9 pipes | Metre | 24,032.82 |
| 18.72.28 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 900 mm dia Ductile iron class K-9 pipes | Metre | 29,421.47 |
| 18.72.29 | Providing and laying S&S centrifugally cast (Spun) / Ductile iron pipes conforming to IS: 8329 - 1000 mm dia Ductile iron class K-9 pipes | Metre | 35,243.98 |
| 18.73.2 | Providing and laying double flanged (screwed / welded) centrifugally (spun) ductile iron pipes of class K-9 conforming to IS:8329 - 150 mm dia ductile iron double flanged | Metre | 4,891.20 |
| 18.72A.3 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 200mm nominal dia pipe | Metre | 3,541.90 |
| 18.73.3 | Providing and laying double flanged (screwed / welded) centrifugally (spun) ductile iron pipes of class K-9 conforming to IS:8329 - 200 mm dia ductile iron double flanged | Metre | 6,557.00 |
| 18.80.2 | Disinfecting C.I water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory -100 mm diameter C.I. pipe | Metre | 24.46 |
| 18.72A.4 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 250mm nominal dia pipe | Metre | 4,734.59 |
| 18.73.4 | Providing and laying double flanged (screwed / welded) centrifugally (spun) ductile iron pipes of class K-9 conforming to IS:8329 - 250 mm dia ductile iron double flanged | Metre | 8,754.77 |
| 18.72A.5 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 300mm nominal dia pipe | Metre | 5,455.21 |
| 18.73.5 | Providing and laying double flanged (screwed / welded) centrifugally (spun) ductile iron pipes of class K-9 conforming to IS:8329 - 300 mm dia ductile iron double flanged | Metre | 11,329.01 |
| 18.79 | Making hole upto 20x20 cm and embedding pipes upto 150mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3coarsesand: 6 graded stone aggregate 20 mm nominal size) including disposal of malba | Metre | 187.42 |
| 18.72A.6 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 350mm nominal dia pipe | Metre | 7,211.19 |
| 18.73.6 | Providing and laying double flanged (screwed / welded) centrifugally (spun) ductile iron pipes of class K-9 conforming to IS:8329 - 350 mm dia ductile iron double flanged | Metre | 14,937.57 |
| 18.80.6 | Disinfecting C.I water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory -250 mm diameter C.I.pipe | Metre | 60.93 |
| 18.72A.7 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 400mm nominal dia pipe | Metre | 8,997.20 |
| 18.73.7 | Providing and laying double flanged (screwed / welded) centrifugally (spun) ductile iron pipes of class K-9 conforming to IS:8329 -400 mm dia ductile iron double flanged | Metre | 19,700.12 |
| 18.75.1 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour - 15 mm nominal bore, weighing not less than 32 gms | Each | 63.00 |
| 18.75.3 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour - 25 mm nominal bore, weighing not less than 62 gms | Each | 108.53 |
| 18.80.4 | Disinfecting C.I water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory -150 mm diameter C.I.pipe | Metre | 36.45 |
| 18.72A.8 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 450mm nominal dia pipe | Metre | 10,715.26 |
| 18.73.8 | Providing and laying double flanged (screwed / welded) centrifugally (spun) ductile iron pipes of class K-9 conforming to IS:8329 - 450mm dia ductile iron double flanged | Metre | 23,979.83 |
| 18.78 | Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I.pipe etc | Metre | 209.68 |
| 18.80.8 | Disinfecting C.I water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory - 350mm diameter C.I.pipe | Metre | 74.81 |
| 18.72A.9 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 500mm nominal dia pipe | Metre | 12,632.00 |
| 18.73.9 | Providing and laying double flanged (screwed / welded) centrifugally (spun) ductile iron pipes of class K-9 conforming to IS:8329 - 500 mm dia ductile iron double flanged | Metre | 9,924.77 |
| 18.80.7 | Disinfecting C.I water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory -300 mm diameter C.I.pipe | Metre | 67.76 |
| 18.72A.10 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 600mm nominal dia pipe | Metre | 16,518.67 |
| 18.73.10 | Providing and laying double flanged (screwed / welded) centrifugally (spun) ductile iron pipes of class K-9 conforming to IS:8329 - 600 mm dia ductile iron double flanged | Metre | 27,621.37 |
| 18.74.1 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT nuts, collar, and bush of approved quality and colour - 15 mm nominal bore with 30 cm lenghth | Each | 71.87 |
| 18.75.2 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour - 20mm nominal bore, weighing not less than 40 gms | Each | 72.96 |
| 18.80.3 | Disinfecting C.I water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory - 125mm diameter C.I.pipe | Metre | 30.46 |
| 18.80.10 | Disinfecting C.I water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory - 450 mm diametre C.I.pipe | Metre | 89.66 |
| 18.72A.11 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 700mm nominal dia pipe | Metre | 19,229.76 |
| 18.73.11 | Providing and laying double flanged (screwed / welded) centrifugally (spun) ductile iron pipes of class K-9 conforming to IS:8329 - 700 mm dia ductile iron double flanged | Metre | 47,176.79 |
| 18.74.2 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT nuts, collar, and bush of approved quality and colour - 15 mm nominal bore with 45cm lenghth | Each | 84.17 |
| 18.76.1 | Cutting holes upto 30x30 cm in walls including making good the same - with common burnt clay F.P.S.(non - modular) brick | Each | 452.04 |
| 18.80.1 | Disinfecting C.I water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory - 80 mm diameter C.I.pipe | Metre | 18.68 |
| 18.80.5 | Disinfecting C.I water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory -200 mm diameter C.I.pipe | Metre | 48.51 |
| 18.80.9 | Disinfecting C.I water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory -400 mm diameter C.I.pipe | Metre | 82.16 |
| 18.80.11 | Disinfecting C.I water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory -500 mm diametre C.I.pipe | Metre | 97.53 |
| 18.72A.12 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 750mm nominal dia pipe | Metre | 23,493.54 |
| 18.80.12 | Disinfecting C.I water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory -600 mm diameter C.I.pipe | Metre | 113.58 |
| 18.81.1 | Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory - 80mm diameter C.I.pipe | Metre | 6.83 |
| 18.81.2 | Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory - 100 mm diameter C.I.pipe | Metre | 8.36 |
| 18.81.3 | Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory - 125 mm diameter C.I.pipe | Metre | 10.18 |
| 18.81.4 | Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory - 150 mm diameter C.I.pipe | Metre | 11.81 |
| 18.81.5 | Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory - 200 mm diameter C.I.pipe | Metre | 17.80 |
| 18.81.6 | Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory - 250mm diameter C.I.pipe | Metre | 20.54 |
| 18.81.7 | Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory - 300 mm diameter C.I.pipe | Metre | 23.09 |
| 18.81.8 | Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory - 350 mm diameter C.I.pipe | Metre | 27.03 |
| 18.81.9 | Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory - 400 mm diameter C.I.pipe | Metre | 31.04 |
| 18.81.10 | Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory - 450 mm diameter C.I.pipe | Metre | 35.13 |
| 18.81.11 | Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory - 500 mm diameter C.I.pipe | Metre | 39.26 |
| 18.81.12 | Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory - 600 mm diameter C.I.pipe | Metre | 47.72 |
| 18.82.1 | Dismantling old C.I.pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead upto 50 metre - 80mm diametre C.I.pipe | Metre | 308.78 |
| 18.82.2 | Dismantling old C.I.pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead upto 50 metre - 100 mm diametre C.I.pipe | Metre | 325.05 |
| 18.82.3 | Dismantling old C.I.pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead upto 50 metre - 125 mm diametre C.I.pipe | Metre | 340.48 |
| 18.82.4 | Dismantling old C.I.pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead upto 50 metre - 150 mm diametre C.I.pipe | Metre | 356.02 |
| 18.82.5 | Dismantling old C.I.pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead upto 50 metre - 200 mm diametre C.I.pipe | Metre | 400.40 |
| 18.82.6 | Dismantling old C.I.pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead upto 50 metre -250 mm diametre C.I.pipe | Metre | 443.25 |
| 18.82.7 | Dismantling old C.I.pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead upto 50 metre - 300 mm diametre C.I.pipe | Metre | 483.20 |
| 18.82.8 | Dismantling old C.I.pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead upto 50 metre - 350 mm diametre C.I.pipe | Metre | 522.30 |
| 18.82.9 | Dismantling old C.I.pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead upto 50 metre - 400 mm diametre C.I.pipe | Metre | 558.84 |
| 18.82.10 | Dismantling old C.I.pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead upto 50 metre - 450 mm diametre C.I.pipe | Metre | 596.08 |
| 18.82.11 | Dismantling old C.I.pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead upto 50 metre - 500 mm diametre C.I.pipe | Metre | 630.05 |
| 18.82.12 | Dismantling old C.I.pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead upto 50 metre - 600 mm diametre C.I.pipe | Metre | 692.22 |
| 18.83.1 | Labour for cuting C.I.pipe with steel saw - 80mm diameter C.I.pipe | Each | 144.12 |
| 18.83.2 | Labour for cuting C.I.pipe with steel saw - 100 mm diameter C.I.pipe | Each | 192.72 |
| 18.83.3 | Labour for cuting C.I.pipe with steel saw - 125 mm diameter C.I.pipe | Each | 266.20 |
| 18.83.4 | Labour for cuting C.I.pipe with steel saw - 150 mm diameter C.I.pipe | Each | 361.72 |
| 18.83.5 | Labour for cuting C.I.pipe with steel saw - 200 mm diameter C.I.pipe | Each | 482.39 |
| 18.83.6 | Labour for cuting C.I.pipe with steel saw - 250 mm diameter C.I.pipe | Each | 601.41 |
| 18.83.7 | Labour for cuting C.I.pipe with steel saw - 300 mm diameter C.I.pipe | Each | 722.07 |
| 18.83.8 | Labour for cuting C.I.pipe with steel saw - 350 mm diameter C.I.pipe | Each | 841.07 |
| 18.83.9 | Labour for cuting C.I.pipe with steel saw - 400 mm diameter C.I.pipe | Each | 961.49 |
| 18.83.10 | Labour for cuting C.I.pipe with steel saw - 450 mm diameter C.I.pipe | Each | 1,080.74 |
| 18.83.11 | Labour for cuting C.I.pipe with steel saw - 500 mm diameter C.I.pipe | Each | 1,201.15 |
| 18.83.12 | Labour for cuting C.I.pipe with steel saw - 600 mm diameter C.I.pipe | Each | 1,437.53 |
| 18.84.1 | Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology - 15 mm nominal bore | Each | 8,550.39 |
| 18.85.1 | Providing and fixing Stainless steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge(The pipe length inserted in the fitting shall not be measured for payment) - Internal work - exposed on wall - 15.88 mm outer dia pipe | Metre | 400.40 |
| 18.86.1 | Providing and fixing Stainless steel pipe and fittings of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i.c fixing of the pipe with clamps at 1.00 m spacing and also including cutting of chases and making good the walls including testing of joints complete as per direction of Engineer-in-charge (The pipe length inserted in the fitting shall not be measured for payment) - Internal work - Concealed pipe - 15.88 outer dia pipe | Metre | 609.59 |
| 18.86A.1 | Providing and fixing Stainless Steel pipe and fitting of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00m spacing and also including cutting of chases and making good the walls including testing of joints complete as per direction of Engineer-in-charge.(The pipe lengthinserted in the fitting shall not be measured for payment) - Internal work - Concealed pipe - 15mm outer dia pipe | Metre | 957.63 |
| 18.88A.1 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standars with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 22mm x 15 mm outer dia pipe | Each | 441.03 |
| 18.85.2 | Providing and fixing Stainless steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge (The pipe length inserted in the fitting shall not be measured for payment) - Internal work - exposed on wall - 22.22 mm outer dia pipe | Metre | 567.70 |
| 18.85A.2 | Providing and fixing Stainless Steel pipe and fitting of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge. (The pipe length inserted in the fitting shall not be measured for payment) - Internal work-Exposed on wall- 22mm outer dia pipe | Metre | 1,097.99 |
| 18.86.2 | Providing and fixing Stainless steel pipe and fittings of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i.c fixing of the pipe with clamps at 1.00 m spacing and also including cutting of chases and making good the walls including testing of joints complete as per direction of Engineer-in-charge(The pipe length inserted in the fitting shall not be measured for payment) - Internal work - Concealed pipe - 22.22 outer dia pipe | Metre | 776.89 |
| 18.87.1 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with - O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Coupling /Socket - For 15.88 mm outer dia pipe | Each | 64.02 |
| 18.86A.2 | Providing and fixing Stainless Steel pipe and fitting of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00m spacing and also including cutting of chases and making good the walls including testing of joints complete as per direction of Engineer-in-charge.(The pipe lengthinserted in the fitting shall not be measured for payment) - Internal work - Concealed pipe - 22mm outer dia pipe | Metre | 1,307.18 |
| 18.87.2 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with - O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge- Coupling /Socket - For 22.22 mm outer dia pipe | Each | 92.47 |
| 18.87A.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Coupling / socket. -for 22mm outer dia pipe | Each | 463.77 |
| 18.85A.3 | Providing and fixing Stainless Steel pipe and fitting of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge. (The pipe length inserted in the fitting shall not be measured for payment) - Internal work-Exposed on wall- 28mm outer dia pipe | Metre | 1,367.12 |
| 18.87.3 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with - O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Coupling /Socket - For 28.58 mm outer dia pipe | Each | 130.88 |
| 18.88.2 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 28.58 mm x 15.88 mm outer dia pipe | Each | 206.28 |
| 18.88A.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standars with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 28mm x 15 mm outer dia pipe | Each | 533.49 |
| 18.85.3 | Providing and fixing Stainless steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge (The pipe length inserted in the fitting shall not be measured for payment) - Internal work - exposed on wall - 28.58 mm outer dia pipe | Metre | 672.52 |
| 18.87A.3 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Coupling / socket. -for 28mm outer dia pipe | Each | 542.03 |
| 18.88A.3 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standars with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 28mm x 22mm outer dia pipe | Each | 650.15 |
| 18.85.4 | Providing and fixing Stainless steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge (The pipe length inserted in the fitting shall not be measured for payment) - Internal work - exposed on wall - 34.00 mm outer dia pipe | Metre | 878.66 |
| 18.85A.4 | Providing and fixing Stainless Steel pipe and fitting of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge. (The pipe length inserted in the fitting shall not be measured for payment) - Internal work-Exposed on wall- 35mm outer dia pipe | Metre | 1,904.88 |
| 18.87.4 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with - O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Coupling /Socket - For 34.00 mm outer dia pipe | Each | 189.21 |
| 18.87A.4 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Coupling / socket. -for 35mm outer dia pipe | Each | 681.44 |
| 18.88A.4 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standars with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 35mm x 22 mm outer dia pipe | Each | 657.26 |
| 18.85.5 | Providing and fixing Stainless steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge(The pipe length inserted in the fitting shall not be measured for payment) - Internal work - exposed on wall - 42.70 mm outer dia pipe | Metre | 904.27 |
| 18.85A.5 | Providing and fixing Stainless Steel pipe and fitting of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge. (The pipe length inserted in the fitting shall not be measured for payment) - Internal work-Exposed on wall- 42mm outer dia pipe | Metre | 2,296.46 |
| 18.85.6 | Providing and fixing Stainless steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge (The pipe length inserted in the fitting shall not be measured for payment) - Internal work - exposed on wall - 48.60 mm outer dia pipe | Metre | 1,291.15 |
| 18.87.5 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with - O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Coupling /Socket - For 42.70 mm outer dia pipe | Each | 227.62 |
| 18.88.4 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 34.00 mm x 15.88 mm outer dia pipe | Each | 270.31 |
| 18.87A.5 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Coupling / socket. -for 42mm outer dia pipe | Each | 921.87 |
| 18.88A.5 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standars with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 35mm x 28 mm outer dia pipe | Each | 812.33 |
| 18.85A.6 | Providing and fixing Stainless Steel pipe and fitting of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge. (The pipe length inserted in the fitting shall not be measured for payment) - Internal work-Exposed on wall- 54mm outer dia pipe | Metre | 2,922.35 |
| 18.87.6 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with - O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Coupling /Socket - For 48.60mm outer dia pipe | Each | 256.08 |
| 18.88.1 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 22.22 mm x 15.88 mm outer dia pipe | Each | 149.38 |
| 18.89.1 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G-116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Slip Coupling / Socket - For 15.88mm outer dia pipe | Each | 71.13 |
| 18.89A.1 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Sleeve / Slip Coupling / Socket -for 15mm outer dia pipe | Each | 650.15 |
| 18.90A.1 | Providing and fixing required Stainless steel fitting of press fit design of grade 316L as per iS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - For 15 mm outer dia pipe | Each | 526.38 |
| 18.89.2 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G-116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Slip Coupling / Socket - For 22.22 mm outer dia pipe | Each | 92.47 |
| 18.90.1 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M- profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Elbow 90 degree - for 15.88 mm outer dia pipe | Each | 85.36 |
| 18.92A.1 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Equal Tee-for 15mm outer dia pipe | Each | 866.39 |
| 18.93A.1 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required as per direction of Engineer-in-charge - Reducing Tee - for 22mm x 15mm outer dia pipe | Each | 991.58 |
| 18.93.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for 28.58 mm x15.88 mm outer dia pipe | Each | 412.56 |
| 18.93A.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required as per direction of Engineer-in-charge - Reducing Tee - for 28mm x 15mm outer dia pipe | Each | 1,232.01 |
| 18.93.3 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for 28.58 mm x22.22 mm outer dia pipe | Each | 412.56 |
| 18.93A.3 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required as per direction of Engineer-in-charge - Reducing Tee - for 28mm x 22mm outer dia pipe | Nos | 1,239.11 |
| 18.93.4 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for 34.00 mm x15.88 mm outer dia pipe | Each | 625.96 |
| 18.93A.4 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required as per direction of Engineer-in-charge - Reducing Tee - for 35mm x 15mm outer dia pipe | Each | 1,556.36 |
| 18.93.5 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for 34.00 mm x22.22 mm outer dia pipe | Each | 625.96 |
| 18.93A.5 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required as per direction of Engineer-in-charge - Reducing Tee - for 35mm x 22mm outer dia pipe | Each | 1,564.90 |
| 18.93.6 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for 34.00 mm x28.58 mm outer dia pipe | Each | 625.96 |
| 18.93A.6 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required as per direction of Engineer-in-charge - Reducing Tee - for 35mm x 28mm outer dia pipe | Each | 1,580.55 |
| 18.93.7 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for 42.70 mm x15.88 mm outer dia pipe | Each | 981.62 |
| 18.94.6 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 28.58 mm outer dia x 25 mm nominal dia threaded | Each | 419.68 |
| 18.93A.7 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required as per direction of Engineer-in-charge - Reducing Tee - for 42mm x 22mm outer dia pipe | Each | 2,192.29 |
| 18.93.8 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for 42.70mm x22.22 mm outer dia pipe | Each | 981.62 |
| 18.94.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 22.22 mm outer dia x 15 mm nominal dia threaded | Each | 305.87 |
| 18.94.4 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.- Male thread tee - for 28.58 mm outer dia x 15 mm nominal dia threaded | Each | 419.68 |
| 18.93A.8 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required as per direction of Engineer-in-charge - Reducing Tee - for 42mm x 28mm outer dia pipe | Each | 2,216.47 |
| 18.93.9 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for 42.70mm x28.58 mm outer dia pipe | Each | 981.62 |
| 18.94.7 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 34.00 mm outer dia x 15 mm nominal dia threaded | Each | 661.52 |
| 18.94.8 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 34.00 mm outer dia x 20 mm nominal dia threaded | Each | 661.52 |
| 18.93A.9 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required as per direction of Engineer-in-charge - Reducing Tee - for 42mm x 35mm outer dia pipe | Each | 2,232.11 |
| 18.93.10 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for 42.70 mm x34.00mm outer dia pipe | Each | 981.62 |
| 18.93A.10 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required as per direction of Engineer-in-charge - Reducing Tee - for 54mm x 22mm outer dia pipe | Each | 2,603.42 |
| 18.93.11 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for48.60 mm x15.88 mm outer dia pipe | Each | 1,273.26 |
| 18.94.1 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge- Male thread tee - for 15.88 mm outer dia x 15 mm nominal dia threaded | Each | 263.19 |
| 18.94.3 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 22.22mm outer dia x 20mm nominal dia threaded | Each | 305.87 |
| 18.94.10 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 34.00 mm outer dia x32 mm nominal dia threaded | Each | 661.52 |
| 18.93A.11 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required as per direction of Engineer-in-charge - Reducing Tee - for 54mm x 28mm outer dia pipe | Each | 2,666.03 |
| 18.93.12 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for 48.60 mm x22.22mm outer dia pipe | Each | 1,273.26 |
| 18.94.9 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 34.00 mm outer dia x 25 mm nominal dia threaded | Each | 661.52 |
| 18.94.11 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 42.70 mm outer dia x 15 mm nominal dia threaded | Each | 1,010.07 |
| 18.93A.12 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required as per direction of Engineer-in-charge - Reducing Tee - for 54mm x 35mm outer dia pipe | Each | 2,688.78 |
| 18.93.13 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for 48.60 mm x28.58 mm outer dia pipe | Each | 1,273.26 |
| 18.94.12 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 42.70 mm outer dia x 20 mm nominal dia threaded | Each | 1,010.07 |
| 18.93A.13 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required as per direction of Engineer-in-charge - Reducing Tee - for 54mm x 42mm outer dia pipe | Each | 2,720.08 |
| 18.93.14 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for 48.60 mm x34.00mm outer dia pipe | Each | 1,273.26 |
| 18.93.15 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for 48.60 mm x42.70 mm outer dia pipe | Each | 1,273.26 |
| 18.94.5 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required diaas per direction of Engineer-in-charge - Male thread tee - for 28.58 mm outer dia x 20 mm nominal dia threaded | Each | 419.68 |
| 18.94.13 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 42.70 mm outer dia x 25 mm nominal dia threaded | Each | 1,010.07 |
| 18.94.14 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 42.70mm outer dia x 32 mm nominal dia threaded | Each | 1,010.07 |
| 18.94.15 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 42.70 mm outer dia x 40 mm nominal dia threaded | Each | 1,010.07 |
| 18.94.16 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 48.60 mm outer dia x 15 mm nominal dia threaded | Each | 1,273.26 |
| 18.94.17 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 48.60 mm outer dia x 20 mm nominal dia threaded | Each | 1,273.26 |
| 18.94.18 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 48.60 mm outer dia x 25 mm nominal dia threaded | Each | 1,273.26 |
| 18.94.19 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 48.60 mm outer dia x 32 mm nominal dia threaded | Each | 1,273.26 |
| 18.94.20 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 48.60 mm outer dia x 40 mm nominal dia threaded | Each | 1,273.26 |
| 18.94.21 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread tee - for 48.60 mm outer dia x 50 mm nominal dia threaded | Each | 1,273.26 |
| 18.95.1 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 15.88 mm outer dia x 15mm nominal dia threaded | Each | 263.19 |
| 18.95A.1 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female thread Tee- for 15mm outer dia X 1/2" nominal dia threaded | Nos | 967.39 |
| 18.95.2 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 22.22 mm outer dia x 15mm nominal dia threaded | Each | 291.64 |
| 18.95A.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female thread Tee- for 22mm outer dia X 1/2" nominal dia threaded | Each | 1,052.75 |
| 18.95.3 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required diaas per direction of Engineer- in-charge - Female thread Tee - for 22.22 mm outer dia x 20 mm nominal dia threaded | Each | 291.64 |
| 18.95A.3 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female thread Tee- for 22mm outer dia X 3/4" nominal dia threaded | Each | 1,192.17 |
| 18.95.4 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 28.58 mm outer dia x 15mm nominal dia threaded | Each | 391.22 |
| 18.95A.4 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female thread Tee- for 28mm outer dia X 1/2" nominal dia threaded | Each | 1,261.87 |
| 18.95.5 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 28.58 mm outer dia x 20 mm nominal dia threaded | Each | 391.22 |
| 18.96.2 | Providing and fixing required Siainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - female thread connector / adapter - for 22.22 mm outer dia x 15 mm nominal dia threaded | Each | 327.21 |
| 18.95A.5 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female thread Tee- for 28mm outer dia X 3/4" nominal dia threaded | Each | 1,308.83 |
| 18.95.6 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 28.58 mm outer dia x 25 mm nominal dia threaded | Each | 391.22 |
| 18.95A.6 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female thread Tee- for 28mm outer dia X 1" nominal dia threaded | Each | 1,448.24 |
| 18.95.7 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 34.00 mm outer dia x 15mm nominal dia threaded | Each | 633.08 |
| 18.96.4 | Providing and fixing required Siainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - female thread connector / adapter - for 28.58 mm outer dia x 15 mm nominal dia threaded | Each | 394.07 |
| 18.96.6 | Providing and fixing required Siainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - female thread connector / adapter - for 28.58 mm outer dia x 25 mm nominal dia threaded | Each | 505.03 |
| 18.95A.7 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female thread Tee- for 35mm outer dia X 1/2" nominal dia threaded | Each | 1,456.77 |
| 18.95.8 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 34.00 mm outer dia x 20 mm nominal dia threaded | Each | 633.08 |
| 18.95A.8 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female thread Tee- for 35mm outer dia X 1-1/4" nominal dia threaded | Each | 2,007.33 |
| 18.95.9 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 34.00 mm outer dia x 25mm nominal dia threaded | Each | 633.08 |
| 18.95A.9 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female thread Tee- for 42mm outer dia X 1-1/4" nominal dia threaded | Each | 2,331.70 |
| 18.95.10 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 34.00 mm outer dia x 32 mm nominal dia threaded | Each | 633.08 |
| 18.95A.10 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female thread Tee- for 54mm outer dia X 1-1/2" nominal dia threaded | Each | 3,333.24 |
| 18.95.11 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 42.70 mm outer dia x 15mm nominal dia threaded | Each | 995.85 |
| 18.95A.11 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female thread Tee- for 54mm outer dia X 2" nominal dia threaded | Each | 3,999.03 |
| 18.95.12 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 42.70 mm outer dia x 20 mm nominal dia threaded | Each | 995.85 |
| 18.95.13 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 42.70 mm outer dia x 25mm nominal dia threaded | Each | 995.85 |
| 18.95.14 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 42.70 mm outer dia x 32 mm nominal dia threaded | Each | 995.85 |
| 18.95.15 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 42.70 mm outer dia x 40mm nominal dia threaded | Each | 995.85 |
| 18.95.16 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 48.60 mm outer dia x 15mm nominal dia threaded | Each | 1,287.49 |
| 18.95.17 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 48.60 mm outer dia x 20mm nominal dia threaded | Each | 1,287.49 |
| 18.95.18 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 48.60mm outer dia x 25mm nominal dia threaded | Each | 1,287.49 |
| 18.95.19 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 48.60 mm outer dia x 32 mm nominal dia threaded | Each | 1,287.49 |
| 18.95.20 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Tee - for 48.60 mm outer dia x 40mm nominal dia threaded | Each | 1,287.49 |
| 18.95.21 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - Profile and with O - ring sealing gasket of EPDM material of required diaas per direction of Engineer- in-charge - Female thread Tee - for 48.60 mm outer dia x 50 mm nominal dia threaded | Each | 1,287.49 |
| 18.96.1 | Providing and fixing required Siainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - female thread connector / adapter - for 15.88 mm outer dia x 15 mm nominal dia threaded | Each | 277.42 |
| 18.96A.1 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and O-ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Connector / Adapter -for 15mm outer dia x 1/2" nominal dia threaded | Each | 758.26 |
| 18.97.1 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M- profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge- Male thread connector / adapter - for 15.88 mm outer dia x 15mm nominal dia threaded | Each | 277.42 |
| 18.97A.1 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread Connector /Adapter - for 15mm outer dia x 1/2" nominal dia threaded | Each | 697.10 |
| 18.99A.1 | Providing and fixing required stainless steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female threaded Elbow 90 degree - for 15mm outer dia x 1/2 " nominal dia thread | Each | 1,106.82 |
| 18.96A.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and O-ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Connector / Adapter -for 22mm outer dia x 1/2" nominal dia threaded | Each | 852.16 |
| 18.97.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M- profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge- Male thread connector / adapter - for 22.22 mm outer dia x 15mm nominal dia threaded | Each | 327.21 |
| 18.100.1 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge -male threaded elbow 90 degree - for 15.88 mm outer dia x 15 mm nominal dia threaded | Each | 277.42 |
| 18.97A.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread Connector /Adapter - for 22mm outer dia x 1/2" nominal dia threaded | Each | 827.98 |
| 18.99A.2 | Providing and fixing required stainless steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female threaded Elbow 90 degree - for 22mm outer dia x 3/4 " nominal dia thread | Each | 1,486.65 |
| 18.96A.3 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and O-ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Connector / Adapter -for 22mm outer dia x 3/4" nominal dia threaded | Each | 998.69 |
| 18.97.3 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M- profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread connector / adapter - for 22.22 mm outer dia x 20 mm nominal dia threaded | Each | 362.77 |
| 18.98.2 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required diaas per direction of Engineer-in- charge - valve connector - for 22.22 mm outer dia x 15 mm nominal dia threaded | Each | 398.33 |
| 18.97A.3 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread Connector /Adapter - for 22mm outer dia x 3/4" nominal dia threaded | Each | 874.92 |
| 18.96A.4 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and O-ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Connector / Adapter -for 28mm outer dia x 1" nominal dia threaded | Each | 1,650.26 |
| 18.97.4 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M- profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread connector / adapter - for 28.58 mm outer dia x 20 mm nominal dia threaded | Each | 462.36 |
| 18.99.3 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - female threaded elbow 90 degree - for 22.22 mm outer dia x 20 mm nominal dia threaded | Each | 305.87 |
| 18.97A.4 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread Connector /Adapter - for 28mm outer dia x 1" nominal dia threaded | Each | 1,146.64 |
| 18.98.4 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - valve connector - for 28.58 mm outer dia x 25 mm nominal dia threaded | Each | 604.62 |
| 18.96A.5 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and O-ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Connector / Adapter -for 35mm outer dia x1- 1/4" nominal dia threaded | Each | 1,766.92 |
| 18.97.5 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M- profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread connector / adapter - for 28.58 mm outer dia x 25mm nominal dia threaded | Each | 462.36 |
| 18.99.1 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - female threaded elbow 90 degree - for 15.88 mm outer dia x 15 mm nominal dia threaded | Each | 227.62 |
| 18.99.2 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - female threaded elbow 90 degree - for 22.22 mm outer dia x 15 mm nominal dia threaded | Each | 305.87 |
| 18.97A.5 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread Connector /Adapter - for 35mm outer dia x 1-1/4" nominal dia threaded | Each | 1,681.56 |
| 18.96A.6 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and O-ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Connector / Adapter -for 42mm outer dia x1- 1/2" nominal dia threaded | Each | 2,712.97 |
| 18.97.6 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M- profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread connector / adapter - for 34.00 mm outer dia x 25mm nominal dia threaded | Each | 675.75 |
| 18.97A.6 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread Connector /Adapter - for 42mm outer dia x1-1/2" nominal dia threaded | Each | 2,448.36 |
| 18.96A.7 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and O-ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - Female thread Connector / Adapter -for 54mm outer dia x 2" nominal dia threaded | Each | 4,162.63 |
| 18.97A.7 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread Connector /Adapter - for 54mm outer dia x 2" nominal dia threaded | Each | 3,286.29 |
| 18.96.11 | Providing and fixing required Siainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - female thread connector / adapter - for 48.60 mm outer dia x 40 mm nominal dia threaded | Each | 1,202.13 |
| 18.96.12 | Providing and fixing required Siainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - female thread connector / adapter - for 48.60 mm outer dia x 50 mm nominal dia threaded | Each | 1,387.07 |
| 18.97.7 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M- profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread connector / adapter - for 34.00 mm outer dia x 32 mm nominal dia threaded | Each | 803.79 |
| 18.97.8 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M- profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread connector / adapter - for 42.70mm outer dia x 32 mm nominal dia threaded | Each | 923.29 |
| 18.97.9 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M- profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread connector / adapter - for 42.70 mm outer dia x 40 mm nominal dia threaded | Each | 1,038.52 |
| 18.97.10 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M- profile and with O - ring sealing gasket of EPDM material of required diaas per direction of Engineer-in-charge - Male thread connector / adapter - for 48.60 mm outer dia x 40 mm nominal dia threaded | Each | 1,209.24 |
| 18.97.11 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V-profile or M- profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male thread connector / adapter - for 48.60mm outer dia x 50 mm nominal dia threaded | Each | 1,621.81 |
| 18.98.1 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - valve connector - for 15.88 mm outer dia x 15 mm nominal dia threaded | Each | 334.31 |
| 18.100A.1 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male threaded Elbow 90 degree - for 15mm outer dia X 1/2" nominal dia threaded | Each | 906.21 |
| 18.101A.1 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Cap - for 15 mm outer dia pipe | Each | 549.14 |
| 18.100.2 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required diaas per direction of Engineer- in-charge -male threaded elbow 90 degree - for 22.22 mm outer dia x 15 mm nominal dia threaded | Each | 320.10 |
| 18.102.1 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - pipe bridge - for 15.88 mm outer dia pipe | Each | 312.98 |
| 18.102A.1 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Pipe Bridge - for 15 mm outer dia pipe | Each | 711.31 |
| 18.89A.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Sleeve / Slip Coupling / Socket -for 22mm outer dia pipe | Each | 773.92 |
| 18.90A.2 | Providing and fixing required Stainless steel fitting of press fit design of grade 316L as per iS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - For 22 mm outer dia pipe | Each | 742.61 |
| 18.92A.2 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Equal Tee-for 22mm outer dia pipe | Each | 1,014.34 |
| 18.100A.2 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male threaded Elbow 90 degree - for 22mm outer dia X 3/4" nominal dia threaded | Each | 1,362.88 |
| 18.101A.2 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Cap - for 22mm outer dia pipe | Each | 711.31 |
| 18.102A.2 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Pipe Bridge - for 22 mm outer dia pipe | Each | 1,921.98 |
| 18.88.3 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 28.58 mm x 22.22 mm outer dia pipe | Each | 213.39 |
| 18.89.3 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G-116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Slip Coupling / Socket - For 28.58 mm outer dia pipe | Each | 130.88 |
| 18.89A.3 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Sleeve / Slip Coupling / Socket -for 28mm outer dia pipe | Each | 897.69 |
| 18.96.3 | Providing and fixing required Siainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - female thread connector / adapter - for 22.22 mm outer dia x 20 mm nominal dia threaded | Each | 341.43 |
| 18.96.5 | Providing and fixing required Siainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - female thread connector / adapter - for 28.58 mm outer dia x 20 mm nominal dia threaded | Each | 412.56 |
| 18.96.7 | Providing and fixing required Siainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - female thread connector / adapter - for 34.00 mm outer dia x25 mm nominal dia threaded | Each | 583.29 |
| 18.96.8 | Providing and fixing required Siainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - female thread connector / adapter - for 34.00 mm outer dia x 32 mm nominal dia threaded | Each | 768.23 |
| 18.96.9 | Providing and fixing required Siainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - female thread connector / adapter - for 42.70 mm outer dia x 32 mm nominal dia threaded | Each | 846.47 |
| 18.96.10 | Providing and fixing required Siainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - female thread connector / adapter - for 42.70 mm outer dia x 40 mm nominal dia threaded | Each | 988.73 |
| 18.98.3 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - valve connector - for 22.22 mm outer dia x 20 mm nominal dia threaded | Each | 441.03 |
| 18.99A.3 | Providing and fixing required stainless steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female threaded Elbow 90 degree - for 28mm outer dia x 1 " nominal dia thread | Each | 2,045.76 |
| 18.100.3 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge -male threaded elbow 90 degree - for 22.22 mm outer dia x 20 mm nominal dia threaded | Each | 320.10 |
| 18.100A.3 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male threaded Elbow 90 degree - for 28mm outer dia X 1" nominal dia threaded | Each | 1,812.44 |
| 18.89.4 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G-116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Slip Coupling / Socket - For 34.00mm outer dia pipe | Each | 189.21 |
| 18.90.3 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M- profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Elbow 90 degree - for 28.58 mm outer dia pipe | Each | 139.41 |
| 18.90A.3 | Providing and fixing required Stainless steel fitting of press fit design of grade 316L as per iS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - For 28 mm outer dia pipe | Each | 991.58 |
| 18.92A.3 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Equal Tee-for 28mm outer dia pipe | Each | 1,246.23 |
| 18.89A.4 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Sleeve / Slip Coupling / Socket -for 35mm outer dia pipe | Each | 998.69 |
| 18.89.5 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G-116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Slip Coupling / Socket - For 42.70 mm outer dia pipe | Each | 227.62 |
| 18.91.3 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V - profile or M - Profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -reducing elbow 90 degree - for 28.58 mm x 22.22 mm outer dia pipe | Each | 334.31 |
| 18.89A.5 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Sleeve / Slip Coupling / Socket -for 42mm outer dia pipe | Each | 1,162.29 |
| 18.89.6 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G-116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Slip Coupling / Socket - For 48.60mm outer dia pipe | Each | 244.69 |
| 18.90.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M- profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Elbow 90 degree - for 22.22 mm outer dia pipe | Each | 92.47 |
| 18.90.4 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M- profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Elbow 90 degree - for 34.00 mm outer dia pipe | Each | 156.49 |
| 18.93.1 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - reducing tee - for 22.22 mm x15.88 mm outer dia pipe | Each | 263.19 |
| 18.90A.4 | Providing and fixing required Stainless steel fitting of press fit design of grade 316L as per iS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - For 35mm outer dia pipe | Each | 1,627.49 |
| 18.90.5 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M- profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Elbow 90 degree - for 42.70 mm outer dia pipe | Each | 170.72 |
| 18.91.1 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V - profile or M - Profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -reducing elbow 90 degree - for 22.22 mm x 15.88 mm outer dia pipe | Each | 213.39 |
| 18.91.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V - profile or M - Profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -reducing elbow 90 degree - for 28.58 mm x 15.88 mm outer dia pipe | Each | 277.42 |
| 18.91.4 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V - profile or M - Profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -reducing elbow 90 degree - for 34.00 mm x 22.22mm outer dia pipe | Each | 412.56 |
| 18.92.1 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - equal tee - for 15.88 mm outer dia pipe | Each | 234.74 |
| 18.92.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - equal tee - for 22.22 mm outer dia pipe | Each | 348.54 |
| 18.92.3 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - equal tee - for 28.58 mm outer dia pipe | Each | 412.56 |
| 18.92A.4 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Equal Tee-for 35mm outer dia pipe | Each | 1,549.26 |
| 18.88.5 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 34.00 mm x 22.22 mm outer dia pipe | Each | 277.42 |
| 18.90A.5 | Providing and fixing required Stainless steel fitting of press fit design of grade 316L as per iS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - For 42mm outer dia pipe | Each | 2,634.73 |
| 18.91.5 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V - profile or M - Profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -reducing elbow 90 degree - for 34.00 mm x 28.58 mm outer dia pipe | Each | 563.36 |
| 18.92.4 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - equal tee - for 34.00 mm outer dia pipe | Each | 625.96 |
| 18.99A.4 | Providing and fixing required stainless steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female threaded Elbow 90 degree - for 35mm outer dia x1- 1/4 " nominal dia thread | Each | 3,324.70 |
| 18.100.4 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge -male threaded elbow 90 degree - for 28.58 mm outer dia x 25 mm nominal dia threaded | Each | 320.10 |
| 18.101.1 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M- profle and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Cap - for 15.88 mm outer dia pipe | Each | 68.29 |
| 18.101.2 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M- profle and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Cap - for 22.22 mm outer dia pipe | Each | 99.59 |
| 18.101.3 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M- profle and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Cap - for 28.58 mm outer dia pipe | Each | 128.03 |
| 18.102.2 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - pipe bridge - for 22.22 mm outer dia pipe | Each | 412.56 |
| 18.101A.3 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Cap - for 28mm outer dia pipe | Each | 890.57 |
| 18.102.3 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - pipe bridge - for 28.58 mm outer dia pipe | Each | 590.40 |
| 18.102A.3 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Pipe Bridge - for 28 mm outer dia pipe | Each | 2,641.84 |
| 18.98.5 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - valve connector - for 34.00 mm outer dia x 32 mm nominal dia threaded | Each | 917.60 |
| 18.98.6 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - valve connector - for 42.70 mm outer dia x 40 mm nominal dia threaded | Each | 1,251.93 |
| 18.98.7 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - valve connector - for 48.60 mm outer dia x 50 mm nominal dia threaded | Each | 1,721.39 |
| 18.99.4 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - female threaded elbow 90 degree - for 25.58mm outer dia x 25 mm nominal dia threaded | Each | 305.87 |
| 18.103.3 | Providing and fixing required Stainless Steel fitting of press fit design of gr 316L as per IS 6911:2017 and conforming to EN- 10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per irection- Male union - for 22mm outer dia X 3/4" nominal dia threaded | Each | 1,774.02 |
| 18.100A.4 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male threaded Elbow 90 degree - for 35mm outer dia X1-1/4" nominal dia threaded | Each | 2,495.31 |
| 18.101A.4 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Cap - for 35mm outer dia pipe | Each | 1,246.23 |
| 18.92.5 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - equal tee - for 42.70 mm outer dia pipe | Each | 988.73 |
| 18.92A.5 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Equal Tee-for 42mm outer dia pipe | Each | 2,169.52 |
| 18.87A.6 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Coupling / socket. -for 54mm outer dia pipe | Each | 1,106.82 |
| 18.88.6 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 34.00 mm x 28.58 mm outer dia pipe | Each | 281.69 |
| 18.88A.6 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standars with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 42mm x 22 mm outer dia pipe | Each | 1,045.64 |
| 18.89A.6 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Sleeve / Slip Coupling / Socket -for 54mm outer dia pipe | Each | 1,650.26 |
| 18.90.6 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M- profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Elbow 90 degree - for 48.60 mm outer dia pipe | Each | 220.51 |
| 18.90A.6 | Providing and fixing required Stainless steel fitting of press fit design of grade 316L as per iS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - For 54mm outer dia pipe | Each | 3,488.31 |
| 18.91.6 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G 116 standard with V - profile or M - Profile and with O -ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -reducing elbow 90 degree - for 42.70 mm x 34.00 mm outer dia pipe | Each | 263.19 |
| 18.92.6 | Providing and fixing required Stainless Steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M-profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - equal tee - for 48.60 mm outer dia pipe | Each | 1,301.72 |
| 18.92A.6 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Equal Tee-for 54mm outer dia pipe | Each | 2,603.42 |
| 18.88.7 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge- reducer - for 42.70 mm x 15.88 mm outer dia pipe | Each | 516.41 |
| 18.88A.7 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standars with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 42mm x 28 mm outer dia pipe | Each | 1,192.17 |
| 18.88.8 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 42.70 mm x 22.22 mm outer dia pipe | Each | 522.11 |
| 18.88A.8 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standars with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 42mm x 35 mm outer dia pipe | Each | 1,246.23 |
| 18.88.9 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge- reducer - for 42.70 mm x 28.58 mm outer dia pipe | Each | 529.23 |
| 18.88A.9 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standars with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 54mm x 28 mm outer dia pipe | Each | 1,448.24 |
| 18.88.10 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge- reducer - for 42.70 mm x 34.00 mm outer dia pipe | Each | 533.49 |
| 18.88A.10 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standars with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 54mm x 35 mm outer dia pipe | Each | 1,711.44 |
| 18.88.11 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 48.60mm x 15.88 mm outer dia pipe | Each | 590.40 |
| 18.88A.11 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standars with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 54mm x 42 mm outer dia pipe | Each | 1,782.57 |
| 18.88.12 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 48.60 mm x 22.22 mm outer dia pipe | Each | 590.40 |
| 18.72A.13 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 800 mm nominal dia pipe | Metre | 25,985.78 |
| 18.88.13 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 48.60 mm x 28.58mm outer dia pipe | Each | 590.40 |
| 18.72A.14 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 900 mm nominal dia pipe | Metre | 32,396.17 |
| 18.88.14 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 48.60 mm x 34.00 mm outer dia pipe | Each | 590.40 |
| 18.72A.15 | Providing, laying, jointing and testing S&S Centrifugally cast ductile Iron double chamber class K-9 pressure pipes conforming to IS 8329:2000 with restrained joints(bolt less),all complete - 1000 mm nominal dia pipe | Metre | 39,262.41 |
| 18.88.15 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - reducer - for 48.60mm x 42.70 mm outer dia pipe | Each | 590.40 |
| 18.99.5 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - female threaded elbow 90 degree - for 34.00 mm outer dia x 32 mm nominal dia threaded | Each | 419.68 |
| 18.99A.5 | Providing and fixing required stainless steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female threaded Elbow 90 degree - for 42mm outer dia x 1-1/2 " nominal dia thread | Each | 3,619.18 |
| 18.100.5 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required diaas per direction of Engineer- in-charge -male threaded elbow 90 degree - for 34.00 mm outer dia x 25 mm nominal dia threaded | Each | 412.56 |
| 18.103.4 | Providing and fixing required Stainless Steel fitting of press fit design of gr 316L as per IS 6911:2017 and conforming to EN- 10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per irection- Male union - for 28mm outer dia X 1" nominal dia threaded | Each | 3,131.22 |
| 18.100A.5 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male threaded Elbow 90 degree - for 42mm outer dia X 1-1/2" nominal dia threaded | Each | 4,573.78 |
| 18.101A.5 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Cap - for 42mm outer dia pipe | Each | 2,712.97 |
| 18.99.6 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - female threaded elbow 90 degree - for 42.70 mm outer dia x 32 mm nominal dia threaded | Each | 682.87 |
| 18.99A.6 | Providing and fixing required stainless steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female threaded Elbow 90 degree - for 54mm outer dia x 2 " nominal dia thread | Each | 5,596.65 |
| 18.100.6 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge -male threaded elbow 90 degree - for 34.00 mm outer dia x 32 mm nomina dia threaded | Each | 412.56 |
| 18.101.5 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M- profle and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Cap - for 42.70 mm outer dia pipe | Each | 355.66 |
| 18.103.5 | Providing and fixing required Stainless Steel fitting of press fit design of gr 316L as per IS 6911:2017 and conforming to EN- 10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per irection- Male union - for 35mm outer dia X 1-1/4" nominal dia threaded | Each | 3,270.64 |
| 18.100A.6 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Male threaded Elbow 90 degree - for 54mm outer dia X 2" nominal dia threaded | Each | 5,201.17 |
| 18.101A.6 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge -Cap - for 54mm outer dia pipe | Each | 2,983.27 |
| 18.99.7 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - female threaded elbow 90 degree - for 42.70 mm outer dia x 40 mm nominal dia threaded | Each | 682.87 |
| 18.99.8 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - female threaded elbow 90 degree - for 48.60 mm outer dia x 40 mm nominal dia threaded | Each | 1,010.07 |
| 18.99.9 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge - female threaded elbow 90 degree - for 48.60 mm outer dia x 50 mm nominal dia threaded | Each | 1,010.07 |
| 18.100.7 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required diaas per direction of Engineer- in-charge -male threaded elbow 90 degree - for 42.70 mm outer dia x 32 mm nominal dia threaded | Each | 682.87 |
| 18.100.8 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required diaas per direction of Engineer- in-charge -male threaded elbow 90 degree - for 42.70 mm outer dia x 40 mm nominal dia threaded | Each | 682.87 |
| 18.100.9 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge -male threaded elbow 90 degree - for 48.60 mm outer dia x 40 mm nominal dia threaded | Each | 988.73 |
| 18.100.10 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V - profile or M - profile and with O - ring sealing gasket of EPDM material of required dia as per direction of Engineer- in-charge -male threaded elbow 90 degree - for 48.60 mm outer dia x 50 mm nominal dia threaded | Each | 988.73 |
| 18.101.4 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M- profle and with O-ring sealing gasket of EPDM material of required diaas per direction of Engineer-in- charge - Cap - for 34.00 mm outer dia pipe | Each | 248.96 |
| 18.101.6 | Providing and fixing required Stainless steel fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- profile or M- profle and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in- charge - Cap - for 48.60mm outer dia pipe | Each | 462.36 |
| 18.103.1 | Providing and fixing required Stainless Steel fitting of press fit design of gr 316L as per IS 6911:2017 and conforming to EN- 10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per irection- Male union - for 15mm outer dia X 1/2" nominal dia threaded | Each | 1,533.59 |
| 18.103.2 | Providing and fixing required Stainless Steel fitting of press fit design of gr 316L as per IS 6911:2017 and conforming to EN- 10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per irection- Male union - for 22mm outer dia X 1/2" nominal dia threaded | Each | 1,549.26 |
| 18.103.6 | Providing and fixing required Stainless Steel fitting of press fit design of gr 316L as per IS 6911:2017 and conforming to EN- 10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per irection- Male union - for 42mm outer dia X 1-1/2" nominal dia threaded | Each | 3,688.90 |
| 18.103.7 | Providing and fixing required Stainless Steel fitting of press fit design of gr 316L as per IS 6911:2017 and conforming to EN- 10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per irection- Male union - for 54mm outer dia X 2" nominal dia threaded | Each | 6,387.63 |
| 18.104.1 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female Union - For 22 mm outer dia X 3/4" nominal dia threaded | Each | 1,641.72 |
| 18.104.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female Union - For 28 mm outer dia X 1" nominal dia threaded | Each | 2,216.47 |
| 18.105.1 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female transition Elbow / FTE - for 15mm outer dia x 1/2" nominal dia threaded | Each | 1,122.46 |
| 18.105.2 | Providing and fixing required Stainless Steel fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge - Female transition Elbow / FTE - for 22mm outer dia x 1/2" nominal dia threaded | Each | 1,502.30 |
Other chapters in this schedule
- Earth Work (70)
- Concrete Work (72)
- Reinforced Concrete Work (131)
- Brick Work (57)
- Stone Work (50)
- Cladding Work (71)
- Wood and PVC Work (493)
- Steel Work (52)
- Flooring (91)
- Roofing (135)
- Finishing (114)
- Repairs To Buildings (108)
- Dismantling And Demolishing (85)
- Miscellaneous Building Work (25)
- Sanitary Installations (226)
- Drainage (135)
- Pile Work (31)
- Aluminium Work (41)
- Water Proofing (27)
- Rain Water Harvesting & TubeWells (37)
- Conservation of Heritage Buildings (7)
- Structural Glazing Aluminium Composite Panel (5)
- New Technologies and Materials (196)
- Irrigation (50)
- Water Supply (Public Health) (1012)
- Sewerage (Public Health) (213)
- Miscellaneous (Public Health) (71)
- OHT (Works) (8)
- Subsoil Exploration (7)
- Energy Conservation Building Code (137)
- Site Clearance and Dismantling (44)
- Earth Work, Erosion Control and Drainages (40)
- Granular Sub-base (63)
- Base & Bituminous Construction (26)
- Traffic Signs,Markings & Other Road Appurtenances (41)
- Pipe Culverts (5)
- Maintenance of Roads (13)
- Horticulture (25)
- Foundation (106)
- Substructure (54)
- Superstructure (97)
- River Training and Protection Works (10)
- Repair and Rehabilitation (12)
- PMGSY -Works (25)
Pricing water supply against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works