Puducherry SOR 2024-25

Flooring rates

91 flooring items from the Puducherry PWD, effective 2024-08-14.

Flooring rates in the Puducherry Puducherry Schedule of Rates 2024-25 run from ₹7.43 to ₹8,358.97. Transcribed from Puducherry PWD — Puducherry Schedule of Rates 2024-25, Puducherry region. Base PDF only; PWD has since issued Correction Slip-3 (22 January 2025) for all four regions, so some rates here may be superseded.. Reference only — verify against the official source before pricing a bid.

Download the full schedule (Excel)All 46 chapters

/

91 items — scroll the table to browse

	Description	Unit
11.1.1	Brick on edge flooring with bricks of class designation 3.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks - cement mortar 1:4 (1 cement: 4 fine aggregate)	Sqm	1,229.53
11.1.2	Brick on edge flooring with bricks of class designation 3.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks - cement mortar 1:6 (1 cement: 6 fine aggregate)	Sqm	1,188.14
11.2	Dry brick on edge flooring in required pattern with bricks of class designation 3.5 on a bed of 12 mm mud mortar, including filling joints with sand, with common burnt clay non modular bricks	Sqm	1,039.14
11.3.1	Cement concrete flooring 1:2:4 (1 cement: 2 fine aggregate: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc.complete - 40mm thick with 20mm nominal size stone aggregate	Sqm	602.35
11.6.1	Cement plaster skirting upto 30 cm height, with cement mortar 1:3 (1 cement: 3 fine aggregate), finished with a floating coat of neat cement - 18mm thick	Sqm	657.46
11.7	Cement concrete pavement with 1:2:4 (1 cement: 2 fine aggregate: 4 graded stone aggregate 20 mm nominal size) including finishing complete	Cum	8,358.97
11.8	Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc	Sqm	89.51
11.12.1.1	Marble chips skirting upto 30 cm height, rubbed and polished to granolithic finish, top layer 6mm thick with white, black, chocolate,grey,yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volume - 18mm thick with under layer 12mm thick in cement plaster 1:3 (1 cement:3 fine aggregate) - dark shade pigment with ordinary cement	Sqm	1,862.15
11.41A.1.1	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Double charge vitrified tiles polished finish of size - size of tile 600x600mm	Sqm	1,446.15
11.12.1.2	Marble chips skirting upto 30 cm height, rubbed and polished to granolithic finish, top layer 6mm thick with white, black, chocolate,grey,yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volume - 18mm thick with under layer 12mm thick in cement plaster 1:3 (1 cement:3 fine aggregate) - light shade pigment with white cement	Sqm	1,957.67
11.41A.1.2	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) wirh water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Double charge vitrified tiles polished finish of size - size of tile 800x800mm	Sqm	1,536.14
11.12.1.3	Marble chips skirting upto 30 cm height, rubbed and polished to granolithic finish, top layer 6mm thick with white, black, chocolate,grey,yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volume - 18mm thick with under layer 12mm thick in cement plaster 1:3 (1 cement:3 fine aggregate) -medium shade pigment with 50% white cement and 50% ordinary cement	Sqm	1,914.85
11.12.1.4	Marble chips skirting upto 30 cm height, rubbed and polished to granolithic finish, top layer 6mm thick with white, black, chocolate,grey,yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volume - 18mm thick with under layer 12mm thick in cement plaster 1:3 (1 cement:3 fine aggregate) - white cement without any pigment	Sqm	1,910.41
11.12.1.5	Marble chips skirting upto 30 cm height, rubbed and polished to granolithic finish, top layer 6mm thick with white, black, chocolate,grey,yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volume - 18mm thick with under layer 12mm thick in cement plaster 1:3 (1 cement:3 fine aggregate) - light shade pigment with ordinary cement	Sqm	1,879.92
11.12.1.6	Marble chips skirting upto 30 cm height, rubbed and polished to granolithic finish, top layer 6mm thick with white, black, chocolate,grey,yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volume - 18mm thick with under layer 12mm thick in cement plaster 1:3 (1 cement:3 fine aggregate) - ordinary cement without any pigment	Sqm	1,832.65
11.13.1	Providing and fixing glass strips in joints of terrazo / cement concrete floors - 40mm wide and 4mm thick	Metre	78.55
11.14	Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width, including cost of forming, nosing etc	Sqm	98.16
11.15.1	Crazy marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement: 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 white,black,or white and black marble chips of sizes from 1 mm to 4mm nominal size by volume),with under layer 25 mm thick cement concrete 1:2:4 (1 cement: 2 fine aggregate: 4 graded stone aggregate 12.5 mm nominal size), including rubbing,polishing and cement slurry etc.complete - 18mm thick crazy marble stone white, black or as specified	Sqm	1,728.24
11.21.1.1	Providing and fixing 10 mm thick acid and / or alkali resistant tiles of approved make and colour using acid and / or alkali resisting mortar bedding, and joints filled with acid and / or alkali resisting cement as per IS:4457,complete as per the direction of Engineeer-in-charge- in flooring on a bed of 10mm thick mortar 1:4 (1 acid proof cement: 4 fine aggregate) - acid and alkali resistant tile	Sqm	1,661.64
11.21.2.1	Providing and fixing 10 mm thick acid and / or alkali resistant tiles of approved make and colour using acid and / or alkali resisting mortar bedding, and joints filled with acid and / or alkali resisting cement as per IS:4457,complete as per the direction of Engineer-in-charge - in dado / skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 fine aggregate) - acid and alkali resistant tile	Sqm	1,819.77
11.22.1.1	Tile work in skirting, risers of steps and dado upto 2 m height,over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 fine aggregate) and jointed with grey cement slurry @ 3.3 kg / sqm, including pointing in white cement mixed with pigment of matching shade complete - marble tiles (polished) Raj nagar - 8mm thick	Sqm	1,280.81
11.23.1	Marble stone flooring with 18mm thick marble stone as per sample of marble approved by Engineer-in-charge, over 20mm (average) thick base of cement mortar !:4 (1 cemnt:4 fine aggregate) laid and jointed with grey cement slurry including rubbing and polishing complete with - Makrana white second quality	Sqm	3,641.02
11.41A.1.4	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) wirh water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Double charge vitrified tiles polished finish of size - size of tile 800x1600mm	Sqm	1,902.14
11.23.2	Marble stone flooring with 18mm thick marble stone as per sample of marble approved by Engineer-in-charge over 20mm (average) thick base of cement mortar !:4 (1 cemnt:4 fine aggregate) laid and jointed with grey cement slurry including rubbing and polishing complete with - Raj nagar plain	Sqm	2,168.60
11.23.3	Marble stone flooring with 18mm thick marble stone as per sample of marble approved by Engineer-in-charge over 20mm (average) thick base of cement mortar !:4 (1 cemnt:4 fine aggregate) laid and jointed with grey cement slurry including rubbing and polishing complete with -Agaria white	Sqm	3,150.21
11.23.4	Marble stone flooring with 18mm thick marble stone as per sample of marble approved by Engineer-in-charge over 20mm (average) thick base of cement mortar !:4 (1 cemnt:4 fine aggregate) laid and jointed with grey cement slurry including rubbing and polishing complete with - Black zebra	Sqm	2,168.60
11.23.5	Marble stone flooring with 18mm thick marble stone as per sample of marble approvedby Engineer-in-charge over 20mm (average) thick base of cement mortar !:4 (1 cemnt:4 fine aggregate) laid and jointed with grey cement slurry including rubbing and polishing complete with - Udaipur green marble	Sqm	2,368.19
11.23.6	Marble stone flooring with 18mm thick marble stone as per sample of marble approvedby Engineer-in-charge over 20mm (average) thick base of cement mortar !:4 (1 cemnt:4 fine aggregate) laid and jointed with grey cement slurry including rubbing and polishing complete with - Pink plain marble	Sqm	2,754.30
11.24	Extra for pre finished nosing to treads of steps of marble stone	Metre	738.82
11.25	Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre	Sqm	857.59
11.26.1	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab,including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 fine aggregate) - 25 mm thick	Sqm	1,935.87
11.27	Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement:3 fine aggregate) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs,including rubbing and polishing complete	Sqm	2,361.11
11.31	Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab	Metre	213.40
11.32	Extra for Kota stone / sand stone in treads of steps and risers using single length above normal size up to 2.00 metre	Sqm	48.37
11.35	Providing and fixing M.S.angle 50x50x5 mm to act as nosing with lugs of M.S.flat 10x5 mm, 10cm long, forked at end 60 cm apart (minimum three lugs to be provided), including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete	KG	184.38
11.37	Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in colours such as white, Ivory, Grey, Fume red brown,laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine aggregate), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc., complete	Sqm	1,032.63
11.37A	Provding and fixing 1st quality ceramic glazed floor tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement: 3 fine aggregate) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete	Sqm	1,066.69
11.38	Providing and laying ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS:15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 fine aggregate), jointing with grey cement slurry @ 3.3 kg /sqm including pointing the joints with white cement and matching pigments etc., complete	Sqm	1,271.78
11.39	Providing and laying rectified glazed ceramic flooring tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of Ist quality conforming to IS:15622, of approved make, in colours white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine aggregate),jointing with grey cement slurry @ 3.3 kg per sqm including grouting the joints with white cement and matching pigments etc., complete	Sqm	1,298.99
11.40	Providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in all colours, shades, except white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete	Sqm	1,488.55
11.41.1	Providing and laying vitrified floor tiles of size 500x500 mm (thickeness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 fine aggregate),jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching pigments etc., complete - size of tile 500x500mm	Sqm	1,470.79
11.41A.1.3	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) wirh water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Double charge vitrified tiles polished finish of size - size of tile 600x1200mm	Sqm	1,582.80
11.41A.1.5	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) wirh water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Double charge vitrified tiles polished finish of size - size of tile 1000x1000mm	Sqm	1,827.78
11.41.2	Providing and laying vitrified floor tiles of size 600 x600 mm (thickeness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 fine aggregate),jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching pigments etc., complete - size of tile600x600mm	Sqm	1,549.54
11.41.3	Providing and laying vitrified floor tiles of size 800 x 800 mm (thickeness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 fine aggregate), jointing with grey cement slurry @3.3 kg per sqmincluding grouting the joints with white cement and matching pigments etc., complete - size of tile 800x800mm	Sqm	1,482.04
11.41.4	Providing and laying vitrified floor tiles of size 1000 x1000 mm (thickeness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 fine aggregate),jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching pigments etc., complete - size of tile1000x1000mm	Sqm	1,778.05
11.42	Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 fine aggregate) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg / sqm	Sqm	752.75
11.43	Fixing glazed /ceramic / Vitrified floor tiles with cement based high polymer modified quick - set tile adhesive (water based) conforming to IS:15477, in average 3 mm thickness - (Using 5 kg adhesive per sqm of tile area)	Sqm	694.28
11.44	Crazy ceramic tile flooring, with under layer 12mm thick cement mortar 1:4 (1 cement: 4 fine aggregate) with joints not exceeding 5mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6mm, mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1kg per 50kg of cement, all complete as per direction of Engineer-in-charge	Sqm	916.31
11.45	Providing and laying 500 x 500 x 40 mm thick Turf paver (Turfpave XD) on 150mm thick sub garde of compacted bed of 20mm thick nominal size stone aggregate and base course and filling with 150 mm thick sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as direction of Engineer-in-charge	Sqm	1,683.79
11.46A	Providing and fixing glazed screen printed border tile 75mm wide having thickness 5mm, of approved quality & make, in all shades,design and prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 cement: 3 fine aggregate) and jointing with grey cement slurry @ 3.3kg/sqm including pointing with white cement mixed with pigment of matching shade, all complete as approved by Engineer-in-charge	Metre	265.29
11.49A	Providing and laying full body vitrified tiles in floor of mimimum thickness 15mm with water absorption less than 0.06% and conforming to IS:15622, of approved make brand and manufacturer, laid on 20mm thick base cement mortar 1:4 (1 cement: 4 fine aggregate) jointing with grey cement slurry @3.3kg per sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vaccum cups for lifting, levelling system and rubber mallet for placing the slab gently and easily. Size of tile 800x2400mm of all colours and shades	Sqm	3,531.21
11.46.1	Providing and laying vitrified tiles of size 500 x500 mm (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours & shade, in skirting,riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement:3 fine aggregate), jointing with grey cement slurry @3.3 kg per sqm including grouting the joint with white cement & matching pigments etc.complete - size of tile 500x500mm	Sqm	1,534.77
11.46.2	Providing and laying vitrified tiles of size 500 x500 mm (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours & shade, in skirting,riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement:3 fine aggregate), jointing with grey cement slurry @3.3 kg per sqm including grouting the joint with white cement & matching pigments etc.complete - size of tile 600x600mm	Sqm	1,613.52
11.47.1	Providing and laying vitrified tiles of size 500 x500 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6mm thickness, including grouting of joints (payment for grouting of joints to be made separately) - size of tile 500x500mm	Sqm	1,850.33
11.47.2	Providing and laying vitrified tiles of size 600 x600 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6mm thickness, including grouting of joints (payment for grouting of joints to be made separately) - size of tile 600x600mm	Sqm	1,929.07
11.48.1	Grouting the joints of flooring tiles having joints of 3mm width,using epoxy grout mix of 0.70kg of organic coated filler of desired shade (0.10kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge - size of tile 500x500 mm	Sqm	348.68
11.48.2	Grouting the joints of flooring tiles having joints of 3mm width,using epoxy grout mix of 0.70kg of organic coated filler of desired shade (0.10kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge - size of tile 600x600 mm	Sqm	287.15
11.49.1	Providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6mm thickness, including grouting of joints (payment for grouting of joints to be made separately) - size of tile 500x500 mm	Sqm	1,693.84
11.49.2	Providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6mm thickness, including grouting of joints (payment for grouting of joints to be made separately) - size of tile 600x600 mm	Sqm	1,772.58
11.50	Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles	Sqm	7.43
11.51.1	Providing and laying machine cut, mirror polished, italian marble stone flooring laid in required pattern in liner portion of the building all complete as per architectural drawings, with 18mm thick stone slab laid over 20mm (average) thick base of cement mortar 1:4 (1 cement: 4 fine aggregate) laid and jointed with white cement slurry @ 4.4kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing,curing and polishing etc., all complete as specified and as per direction of Engineer- in-charge- 18 mm thick Italian marble stone slab, Perlato,Rosso verona, Fire red or dark emperadore etc	Sqm	6,744.01
11.52.1	Providing and laying machine cut, mirror polished marble stone flooring, in required design (simple geometrical, abstract etc) and in patterns in combination with italian marble stones of different colours,shades and finished surface texture etc.,in linear portions of the building all complete as per the architectural drawings, with 18mm thick stone slab laid over 20mm (average) thick base of cement mortar 1:4 (1 cement: 4 fine aggregate) laid and jointed with white cement slurry @ 4.4 kg / sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing,curing and polishing etc. all complete as specified as per direction of Engineer-in-charge - 18mm thick italian marble stone slab, Perlato,Rosso verona, Fire red or dark emperadore etc	Sqm	7,080.11
11.53	Providing and fixing glass mossaic tiles on finished plain wall surface of size 20 mm x 20mm x 4mm in all colour, design, fixing in customize design as per direction of Engineer-in- charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved as per direction of Engineer-in-charge	Sqm	2,801.56
11.54.1	Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as per direction of Engineer-in-charge consisting of: (a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as per direction of Engineer-in- charge. (c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti- static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. -3 00 mm Finished Floor Height (FFH)	Sqm	5,318.07
11.55.1	Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as per direction of Engineer-in-charge:F lamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent	Sqm	2,990.05
11.56.2	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement: 4 fine aggregate) laid and joined with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as per direction of Engineer-in-charge - Polished granite stone slab of all colour and texture except black, cherry /ruby red	Sqm	3,332.30
11.63.2	Providing and fixing homogeneous Polyvinyl chloride tile in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quality including rolling with light wooden roller weighing about 5 kg. All complete - 1.5 mm thick tiles	Sqm	931.74
11.41A.2.1	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) wirh water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Glazed vitrified floor tiles polished finish of size - size of tile 600x600mm	Sqm	1,501.14
11.41A.2.2	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) wirh water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Glazed vitrified floor tiles polished finish of size - size of tile 600x1200mm	Sqm	1,823.40
11.41A.2.3	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) wirh water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Glazed vitrified floor tiles polished finish of size - size of tile 800x800mm	Sqm	1,747.58
11.41A.2.4	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) wirh water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Glazed vitrified floor tiles polished finish of size - size of tile 800x1200mm	Sqm	2,104.83
11.41A.2.5	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) wirh water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Glazed vitrified floor tiles polished finish of size - size of tile 1200x1200mm	Sqm	2,632.70
11.46.3	Providing and laying vitrified tiles of size 500 x500 mm (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours & shade, in skirting,riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement:3 fine aggregate), jointing with grey cement slurry @3.3 kg per sqm including grouting the joint with white cement & matching pigments etc.complete - size of tile 800x800mm	Sqm	1,547.90
11.47.3	Providing and laying vitrified tiles of size 800 x800 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6mm thickness, including grouting of joints (payment for grouting of joints to be made separately) - size of tile 800x800mm	Sqm	1,863.45
11.48.3	Grouting the joints of flooring tiles having joints of 3mm width,using epoxy grout mix of 0.70kg of organic coated filler of desired shade (0.10kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete - size of tile 800x800 mm	Sqm	225.63
11.49.3	Providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6mm thickness, including grouting of joints (payment for grouting of joints to be made separately) - size of tile 800x800 mm	Sqm	1,706.96
11.61	Providing and laying 22 mm thick factory made pre-polished cement concrete flooring tiles of required colour and design over 20 mm thick cement mortar 1:4 (1 cement: 4 sand) and jointed with cement slurry mixed with an admixture of pigment to match the shade of the tile	Sqm	1,544.97
11.62	Providing and fixing PVC corner beading of required size to suit the thickness of the wall tile at the corner joints of dado works	Metre	193.24
11.63.1	Providing and fixing homogeneous Polyvinyl chloride sheet in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quality including rolling with light wooden roller weighing about 5 kg. All complete - 1.5 mm thick sheet	Sqm	727.23
11.63.3	Providing and fixing homogeneous Polyvinyl chloride sheet in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quality including rolling with light wooden roller weighing about 5 kg. All complete - 2 mm thick sheet	Sqm	816.86
11.41A.3.1	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) wirh water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Glazed vitrified tiles Matt / Antiskid finish of size - size of tile 600x600mm	Sqm	1,460.31
11.41A.3.2	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) wirh water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Glazed vitrified tiles Matt / Antiskid finish of size - size of tile 600x1200mm	Sqm	1,821.94
11.41A.3.3	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) wirh water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Glazed vitrified tiles Matt / Antiskid finish of size - size of tile 800x800mm	Sqm	1,743.20
11.41A.3.4	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) wirh water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Glazed vitrified tiles Matt / Antiskid finish of size - size of tile 800x1200mm	Sqm	2,104.83
11.41A.3.5	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturere) wirh water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement: 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Glazed vitrified tiles Matt / Antiskid finish of size - size of tile 1200x1200mm	Sqm	2,104.83
11.46.4	Providing and laying vitrified tiles of size 500 x500 mm (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours & shade, in skirting,riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement:3 fine aggregate), jointing with grey cement slurry @3.3kg per sqm including grouting the joint with white cement & matching pigments etc.complete - size of tile 1000x1000mm	Sqm	1,843.91
11.47.4	Providing and laying vitrified tiles of size 1000 x1000 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6mm thickness, including grouting of joints (payment for grouting of joints to be made separately) - size of tile 1000x1000mm	Sqm	2,159.46
11.48.4	Grouting the joints of flooring tiles having joints of 3mm width,using epoxy grout mix of 0.70kg of organic coated filler of desired shade (0.10kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete - size of tile 1000x1000 mm	Sqm	158.78
11.49.4	Providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6mm thickness, including grouting of joints (payment for grouting of joints to be made separately) - size of tile 1000x1000 mm	Sqm	2,002.97
11.63.4	Providing and fixing homogeneous Polyvinyl chloride tile in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quality including rolling with light wooden roller weighing about 5 kg. All complete - 2 mm thick tiles	Sqm	963.11

Other chapters in this schedule

Pricing flooring against a live tender

Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works