Andhra Pradesh SOR 2026-27
Windows rates
99 windows items from the Board of Chief Engineers, Government of Andhra Pradesh, effective 2026-06-01.
Windows rates in the Andhra Pradesh Common Schedule of Rates — Part-III (Buildings, Water Supply & Electrical) 2026-27 run from ₹4,602.00 to ₹19,793.00. Transcribed from Government of Andhra Pradesh — Common Schedule of Rates 2026-27, Part-III (Buildings), Board of Chief Engineers. Reference only — verify against the official source before pricing a bid.
/
99 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| BMT-P.01 | Windows: Single shutter 2'0 x 4'0 (609.6 x 1219.2 mm ) Outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm | Sqm | 6,492.00 |
| BMT-P.02 | Windows: Double shutter 3'0" x 4'0" (914.4mm x 1219.2 mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm | Sqm | 6,492.00 |
| BMT-P.03 | Windows: Double shutter 3'0" x 4'0" (914.4mm x 1219.2 mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm | Sqm | 6,908.00 |
| BMT-P.04 | Windows: Double shutter 4'0" x 4 '0" (1219.2x12.19.2mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm | Sqm | 6,687.00 |
| BMT-P.05 | Windows: Double shutter 4'0" x 4 '0" (1219.2x1219.2mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm | Sqm | 6,671.00 |
| BMT-P.06 | Windows: Double shutter 4'6" x 4 '6" (1371.6x1371.6mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm | Sqm | 6,166.00 |
| BMT-P.07 | Windows: Centre fixed both side openable shutter 5'0" x 4'0" (1524x1219.2mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm fixed beading section size of 18 x 25 mm | Sqm | 6,166.00 |
| BMT-P.08 | Windows: Centre fixed both side openable shutter 6'0" x 4' 0"1828.8x1219.2mm) outer frame sectionsize of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm fixed beading section size of 18 x 25 mm | Sqm | 6,351.00 |
| BMT-P.09 | Windows: Centre fixed both side openable shutter 6'0" x 4'6" (1828.8x1371.6mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm fixed beading section size of 18 x 25 mm | Sqm | 6,620.00 |
| BMT-P.16 | Single shutter Window 2’0”x4’0” (609.6mm x 1219.2mm). Outer frame section size of 48x50mm shutter frame section size of 48 x 25 mm | Sqm | 5,938.00 |
| BMT-P.17 | Double shutter Window with vertical mullion 3’0” x 4’0” ( 914.4mm x 1219.2mm) outer frame section size of 48x50mm shutter frame section size of 48 x 25 mm. Mullion section size of 48x50mm | Sqm | 6,251.00 |
| BMT-P.18 | Double shutter Window with vertical member4’0” x 4’0” (1219.2mm x1219.2mm) outer frame section size of 48x50mm shutter frame section size of 48 x 25 mm and mullion section should be of 48x50mm | Sqm | 6,356.00 |
| BMT-P.20 | Centre fixed both side openable shutter window 6’0”x4’0” (1828.8mm x1219.2mm). Outer frame section size of 48x50mm. Shutter frame section size of 48 x 25 mm. Mullion section size of 48x50mm. Fixed beading section size of 12 x 12mm. Providing & Fixing of Openable Windows with Flymesh made of pre painted steel (Base Steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm | Sqm | 4,655.00 |
| BMT-P.21 | Single shutter Window 2’0”x4’0” (609.6mm x 1219.2mm). Outer frame section size of 72x50mm shutter frame section size of 48 x 25 mm | Sqm | 5,297.00 |
| BMT-P.22 | Double shutter Window with vertical mullion 3’0” x 4’0” ( 914.4mm x 1219.2mm) outer frame section size of 72x50mm shutter frame section size of 48 x 25 mm. Mullion section size of 72x50mm | Sqm | 7,907.00 |
| BMT-P.23 | Double shutter Window with vertical member4’0” x 4’0” (1219.2mm x 1219.2mm) outer frame section size of 72x50mm shutter frame section size of 48 x 25 mm and mullion section should be of 72x50mm | Sqm | 7,191.00 |
| BMT-P.24 | Centre fixed both side openable shutter window 5’0”x4’0” (1524mm x1219.2mm). Outer frame section size of 72x50mm. Shutter frame section size of 48 x 25 mm. Mullion section size of 72x50mm. Fixed beading section size of 12 x 12 mm | Sqm | 6,486.00 |
| BMT-P.25 | Centre fixed both side openable shutter window 6’0”x4’0” (1828.8mm x1219.2mm). Outer frame section size of 72x50mm. Shutter frame section size of 48 x 25 mm. Mullion section size of 72x50mm. Fixed beading section size of 12 x 12 mm | Sqm | 6,681.00 |
| BMT-P.33 | Galvanized powder coated Casement Windows with openable shutters duly manufactured using pressed steel sections in mild steel conforming to IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 60x50mm, centre for mullion of 62x50mm, section for shutter of 52 x 22 mm, outer frame and mullions to have one side rebate for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm c/c the sections assembled with bolt & nut assembly with zincelectroplated M5 bolts, GI Handle of size 80 mm x 15 mm 1 No per shutter, 2 nos of stainless steel heavy duty pivot hinges of size 3" of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick powder coated aluminium 'U' channel and window frames fixing to the concrete/masonry wall arrangement with self expanding screws, complete for finished item of work 1530 x 1372 or above size | Sqm | 5,172.00 |
| BMT-P.34 | Galvanized powder coated Casement Windows with openable shutters duly manufactured using pressed steel sections in mild steel conforming to IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 88x50mm, centre for mullion of 62x88 mm, section for glass and flyproof mesh shutter of 52 x 22 mm, outer frame and mullions to have two sides rebate for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm c/c the sections assembled with bolt & nut assembly with zincelectroplated M5 bolts, GI Handle of size 80 mm x 15 mm 1 No per shutter, 2 Nos of stainless steel heavy duty pivot hinges of size 3" of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick powder coated aluminium 'U' channel and flyproof mesh of SS 304 grade fixed with 18 mm x 12 mm BT wood beading and window frames fixing arrangement to the concrete/masonry wall with self expanding screws, complete for finished item of work 1220 x 1372 or below siz | Sqm | 7,309.00 |
| BMT-P.35 | Galvanized powder coated Casement Windows with openable shutters duly manufactured using pressed steel sections in mild steel conforming to IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 88x50mm, centre for mullion of 62x88 mm, section for glass and flyproof mesh shutter of 52 x 22 mm, outer frame and mullions to have two sides rebate for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm c/c the sections assembled with bolt & nut assembly with zincelectroplated M5 bolts, GI Handle of size 80 mm x 15 mm 1 No per shutter, 2 Nos of stainless steel heavy duty pivot hinges of size 3" of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick powder coated aluminium 'U' channel and flyproof mesh of SS 304 grade fixed with 18 mm x 12 mm BT wood beading and window frames fixing arrangement to the concrete/masonry wall with self expanding screws, complete for finished item of work 1530 x 1372 orabove size | Sqm | 6,930.00 |
| BMT-P.36 | Providing & Fixing of Mesh windows made of prepainted steel (Base Steel as per IS 513 of 0.58mm thick galvanized as per IS 277 with zinc of 120 GSM), primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 57. microns thick alkyd backer, section for outer frame of 47 x 36 mm, centre mullion of 60 x 36 mm, section mesh beading 18 x 6 mm and Fly mesh shutter section of 20 x 40 mm, the sections cut to length meter joined with corner bracket and centre mullions fixed with mullion cap, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per S.S. Mesh for fly mesh shutter (304 grade) including fixing the frames in the concrete/masonry wall by means of self expanding screws complete for finished item of work | Sqm | 4,835.00 |
| BMT-P.46 | Single openable shutter window size of 2’ 0” x 4’ 0” (609.6 x 1219.2mm) outer frame section size of 80 x 45mm, shutter frame section size of 52 x 25mm thick | Sqm | 5,456.00 |
| BMT-P.47 | Double openable shutter window Size of 3’ 0” x 4’ 0” (914.4mm x 1219.2mm) outer frame section size of 80 x 45mm,shutter frame section size of 52 x 25mm, vertical mullion section size of 80 x 60 mm | Sqm | 5,838.00 |
| BMT-P.48 | Double openable shutter window size of 4’0” x 4’0” (1219.2mm x 1219.2mm) outer frame section size 80 x 45mm, shutter frame section size of 52 x 25 mm ,Vertical mullion section size of 80 x 60 mm | Sqm | 5,838.00 |
| BMT-P.49 | Double Openable Shutter and Center Fixed window of size 5’0 x 4’0 ( 1524 x 1219.2mm)outer frame section size of 80mm x 45mm, shutter frame section size of 52 x 25mm ,Vertical mullion section size of 80 x 60 mm, beading section size of 9 x 12mm to be provided for glass holding | Sqm | 5,127.00 |
| BMT-P.50 | Double Openable Shutter and Center Fixed window of size 6’0 x4’0 ( 1829.6 x 1219.2mm)outer frame section size of 80mm x 45mm , shutter frame section size of 52 x 25mm ,Vertical mullion section size of 80 x 60 mm, beading section size of 9 x 12mm to be provided for glass holding | Sqm | 5,127.00 |
| BMT-P.51 | Single openable shutter window size of 2’ 0” x 4’ 0” (609.6 x 1219.2mm) outer frame Double rebate section size of 100 x 45mm, Glazed and flymesh shutter profile section size of 52 x 25mm | Sqm | 5,127.00 |
| BMT-P.52 | Double openable shutter window Size of 3’ 0” x 4’ 0” (914.4mm x 1219.2mm) outer frame Double rebate section size of 100 x 45mm, Glazed and flymesh shutter profile section size of 52 x 25mm, vertical mullion section size of 100 x 60 mm | Sqm | 5,486.00 |
| BMT-P.53 | Double openable shutter window size of 4’0” x 4’0” (1219.2mm x 1219.2mm) outer frame Double rebate section size of 100 x 45mm, Glazed and flymesh shutter profile section size of 52 x 25mm, vertical mullion section size of 100 x 60 mm | Sqm | 7,233.00 |
| BMT-P.54 | Double Openable Shutter and Center Fixed window of size 5’0 x 4’0 ( 1524 x 1219.2mm)outer frame section size of 80mm x 45mm , shutter frame section size of 52 x 25mm ,Vertical mullion section size of 100 x 60 mm , beading section size of 9 x 12mm to be provided for glass holding | Sqm | 7,627.00 |
| BMT-P.55 | Double Openable Shutter and Center Fixed window of size 6’0 x4’0 (1829.6 x 1219.2mm) outer frame section size of 80mm x 45mm, shutter frame section size of 52 x 25mm ,Vertical mullion section size of 100 x 60 mm , beading section size of 9 x 12mm to be provided for glass holding | Sqm | 7,192.00 |
| BMT-P.76A | Pre Laminated Cement Bonded Particle Board WINDOWS – Single shutter 2’0”x4’0” outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 25mm | Sqm | 6,649.00 |
| BMT-P.76B | Pre Laminated Cement Bonded Particle Board WINDOWS –Double shutter 3’0” x 4’0” outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 25mm mullion section size of50mm x 60mm for outer frame | Sqm | 6,741.00 |
| BMT-P.76C | Pre Laminated Cement Bonded Particle Board WINDOWS – Double shutter 3’0” x 3’0” outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 25mm Mullion section size of50mm x 60mm for outer frame | Sqm | 7,015.00 |
| BMT-P.76D | Pre Laminated Cement Bonded Particle Board WINDOWS – Double shutter 4’0”x4’0” outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 25mm Mullion section size of50mm x 60mm for outer frame | Sqm | 6,478.00 |
| BMT-P.10 | Ventilators: Top Hung 2 '0" x 2'0" (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm | Sqm | 7,747.00 |
| BMT-P.11 | Ventilators: Top Hung 4 '0" x 2'0" (1219.2x609.6mm) outer frame section size of 46 x 52 m shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm | Sqm | 7,747.00 |
| BMT-P.12 | Ventilators: Top Hung 4'0"x 3'0" (1219.2x914.4mm) outer frame section size of 46 x 52m m shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm | Sqm | 7,747.00 |
| BMT-P.13 | Ventilators: Fixed louvers 2'0" x 2'0" (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm | Sqm | 5,115.00 |
| BMT-P.14 | Ventilators: Fixed louvers 4'0" x 2'0" (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm | Sqm | 5,115.00 |
| BMT-P.15 | Ventilators: Fixed louvers 4'0" x 3'0" (1219.2 x 914.4 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm | Sqm | 5,115.00 |
| BMT-P.26 | Providing and fixing Pre painted Steel sliding Window/Door fabricated from roll formed sections made of Galvanized steel colour coated /powder coated (Base Steel as per IS 513 ‘D’ quality galvanized as per IS 277 with Zinc of 120 Gms./ Sq.mtr) with total coated thickness of 0.58mm. Primer Coat with epoxy primer of 5-7 microns thick, finished paint with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The External Section for two track Sliding Window should be of 44 x 59mm with a provision for bottom track insert profile of 10x9 mm made of aluminium. Section for Window glass shutter should be of 35x49mm, Section for Window Euro groove should be of 25x24mm made of plastic to accommodate standard accessories, and section for window lap strip should be of 21x4mm made of plastic. Section for Door shutter should be of 35x67mm, Section for Door Euro Groove 25x31mm made of plastic to accommodate standard accessories and size of lap strip should be of 39x41mm. The Window/Door to be panelled with 5mm thick plain float glass. The gaskets are to be made of Ethyl Propylene Diamine Manomer [EPDM]. Corner Brackets for internal and external frame to be made of glass filled nylon. Touch lock to be provided for Window Shutter. Sections are to be cut to length, joined and assembled by means of corner brackets. The above frame to be fixed to Brick/Concrete masonry by using Nylon selfexpanding caps and driving MS electroplated 80mm screws into the caps through frames. The Grill for safety for windows to be made of 10mm thick square rod bars with 152mm pitch for complete item of work . For Door there will be no Safety Grill including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work | Sqm | 7,377.00 |
| BMT-P.37 | Providing and fixing COMPOSITE SLIDING WINDOW fabricated from roll formed sections made of Galvanized Steel colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams /Sq.Mtr.) with total coated thickness of 0.58 mm, powder coated with pure Polyester Powder up to 50-60 microns thick and the section for external frame bottom of 68 x 25mm (Aluminium), External frame sides & Top of 68 x 25 mm (Aluminium), section for shutter of 59 x 23mm and Lap Strip of 30 x 7.5mm (uPVC) cut to length and mitre joined with Lbracket and 5 mm plain float Galss with Ethyl Propylene Diamine Monomer (EPDM) gasket, the corner bracket for external frame made of Aluminium ‘L’Angle, Corner Bracket for internal frame made of Polyproylene, Crescent Latch, Rollers, & EPDM Gaskets for shutters, wool pile for lap strip, Bump Stop Base & Rubber for shutter stopper including fixing to brick/concrete masonry using Nylon selfexpanding caps and driving MS electroplated 80mm long screws into the caps through frames and fixing 10mm square guard bars with 6” pitch centre to centre (152.4mm) completed for finished item of work | Sqm | 6,609.00 |
| BMT-P.56 | Single openable ventilator shutter size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame section size of 80 x 45mm, shutter frame section size of 52 x 25mm thick | Sqm | 7,024.00 |
| BMT-P.57 | Double openable ventilator shutter Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame section size of 80 x 45mm,shutter frame section size of 52 x 25mm, vertical mullion section size of 80 x 60 mm | Sqm | 7,024.00 |
| BMT-P.58 | Double openable fix shutter size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer frame section size of 80 x 45mm , shutter frame section size of 52 x 25 mm ,Vertical mullion section size of 80 x 60 mm | Sqm | 7,024.00 |
| BMT-P.59 | Single fixed Louvers Ventilator size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame box section size of 80 x 45mm | Sqm | 4,832.00 |
| BMT-P.60 | Double fixed Louvers ventilator Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame box section size of 80 x 45mm, vertical mullion section size of 80 x 60 mm | Sqm | 4,832.00 |
| BMT-P.61 | Double fixed Louvers Ventilator size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer frame box section size of 80 x 45mm , Vertical mullion section size of 80 x 60 mm | Sqm | 4,602.00 |
| BMT-P.62 | Single openable ventilator shutter window size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame section size of 100 x 45mm, Glazed and flymesh shutter frame section size of 52 x 25mm thick | Sqm | 8,658.00 |
| BMT-P.64 | Double openable fix shutter window size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer frame section size 100 x 45mm , Glazed and flymesh shutter frame section size 52 x 25 mm ,Vertical mullion section size of 100 x 60 mm | Sqm | 8,016.00 |
| BMT-P.65 | Single fixed Louvers Ventilator window size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame box section size of 100 x 45mm, flymesh shutter frame section size 52 x 25 mm | Sqm | 5,779.00 |
| BMT-P.66 | Double fixed Louvers ventilator window Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame box section size of 100 x 45mm, flymesh shutter frame section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm | Sqm | 5,779.00 |
| BMT-P.67 | Double fixed Louvers Ventilator window size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer frame box section size 100 x 45mm , flymesh shutter frame section size 52 x 25 mm Vertical mullion section size of 100 x 60 mm | Sqm | 5,779.00 |
| BMT-P.77 | Providing and fixing 3 Track 3 Shutter Pre painted Steel sliding Window/Door fabricated from roll formed sections made of Galvanized steel colour coated /powder coated (Base Steel as per IS 513 ‘D’ quality galvanized as per IS 277 with Zinc of 120 Gms./ Sq.mtr) with total coated thickness of 0.58mm. Primer Coat with epoxy primer of 5-7 microns thick, finished paint with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The External Section for Three Track Three Sliding Shutter should be of 44 x 107mm with a provision for bottom track insert profile of 10x9 mm made of aluminium. Section for Window glass shutter should be of 35x49mm, Section for Window Euro groove should be of 25x24mm made of plastic to accommodate standard accessories, and section for window lap strip should be of 21x4mm made of plastic. Section for Mesh Shutter should be of 35x49mm. Section for Door shutter should be of 35x67mm, Section for Door Euro Groove 25x31mm made of plastic to accommodate standard accessories and size of lap strip should be of 39x41mm. The Window/Door to be panelled with 5mm thick plain float glass. The gaskets are to be made of Ethyl Propylene Diamine Manomer [EPDM]. Corner Brackets for internal and external frame to be made of glass filled nylon. Touch lock to be provided for Window Shutter. Sections are to be cut to length, joined and assembled by means of corner brackets. The above frame to be fixed to Brick/Concrete masonry by using Nylon selfexpanding caps and driving MS electroplated 80mm screws into the caps through frames. The Grill for safety for windows to be made of 10mm thick square rod bars with 152mm pitch for complete item of work . For Door there will be no Safety Grill including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work | Sqm | 8,253.00 |
| BMT-P.78.A | Providing and fixing factory made uPVC any colour casement/casementcum fixed glazed windows comprising of uPVC multichambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriateCasement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame47 x 50mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( Area of window up to 2.50 sqm) | Sqm | 7,006.00 |
| BMT-P.78.B | Providing and fixing factory made uPVC any colour casement/casementcum fixed glazed windows comprising of uPVC multichambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriateCasement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm) | Sqm | 7,225.00 |
| BMT-P.79.A | Providing and fixing factory made uPVC any colour fixed glazed windows / Ventilators comprising of uPVC multiFixed windows / Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension | Sqm | 6,456.00 |
| BMT-P.80.A | Providing and fixing factory-made uPVC any colour sliding glazed window up to 1.50 m in height imensioncomprising of uPVC multi chambered frame with in built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy (whiteTwo track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window up to 1.75 sqm) | Sqm | 6,698.00 |
| BMT-P.80.B | Providing and fixing factory-made uPVC any colour sliding glazed window up to 1.50 m in height imensioncomprising of uPVC multi chambered frame with in built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy (whiteThree track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window up to 1.75 sqm) | Sqm | 9,000.00 |
| BMT-P.80.C | Providing and fixing factory-made uPVC any colour sliding glazed window up to 1.50 m in height imensioncomprising of uPVC multi chambered frame with in built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy (whiteTwo track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm | Sqm | 6,960.00 |
| BMT-P.81 | Providing and fixing factory made uPVC any colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multichambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVCextruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket/TPV, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless-steel (SS 304 grade) body with adjustable double nylon rollers (weightbearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealant . Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above2.50 sqm up to 4.00 sqm.) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be | Sqm | 7,484.00 |
| BMT-P.82 | Double Skin powder coatedGI openable/casement single rebate Windows with 5mm thick Polycarbonate sheet SIZE OF WINDOW 1.50 M X 1.35M (three openable shutters) Providing and fixing of powder coated Openable/Casement GI Window of size 1.50mx1.35m (three openable shutters). Window frame having two horizontals & four verticals (Base steel as per IS513 of 0.60mm thick galvanized as per IS 277withZinc of 120 GSM), powder coated paint of 60-65microns(DFT) thick and section for double Skin outer frame of 80 mm x 65 mm x 0.6mm thick including architrave of 20mm,centre mullions of 80mm x 60mm x 0.6mm thick and section for Double Skin shutter of 52mm x25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter and the sections cut to length metre joined with corner bracket, center mullion fixed with mullion cap, shutter with 5mmthick Polycarbonate Solid clear UV resistant sheet of reputed make ( UV stabilized, transparent & solid section ) with EPDM rubber gaskets including fixing the frames in concrete/masonry wall by means of self-expanding screws, Including 10mm Square guard bars with 14Nos horizontals & two verticals, beading section size of 9 x12mm to be provided in shutter for Polycarbonate sheet holding, including infill material of polyurethane foam (PUF) and all fixers like 100mm long SS handle -3 Nos, 125mm long SS tower bolts 6Nos, 75mm long SS ball bearing butt Hinges-9Nos, 200mm long SS latch type window stopper -3Nos (all fixers should be stainless steel 304 grade) including all stiffeners ,supporting plates, SS 304 screws, Nylon caps, EPDM rubber gasket etc., complete for finished item of work. and including cost & conveyance of all materials and all labour charges like loading, unloading, and fixing of powder coated Galvanized Steel Window etc., complete for finished item of work. Window Frame: Frame having four verticals & two horizontals, alround frame section of size;80mmx65mm x 0.6mm thick including architrave of 20mm and center mullions section of size; 80mmx60mm x0.6mm | Sqm | 13,065.00 |
| BMT-P.83 | Providing and fixing in position factory- made washroom ventilator , fabricated from galvanized steel sections, complete with ventilator frame, louver system, bright bars, all fittings, fixtures, fasteners, and accessories. The ventilator frame shall be manufactured from 1.0 mm thick galvanized plain skin pass (GPSP) sheet conforming to IS 513 ‘D’ quality and IS 277 with minimum 120 GSM zinc coating, roll- formed into closed box profile, mitred at corners and mechanically assembled using corner brackets and self-expanding screws. The ventilator glass panels fixed using PVC plastic components. The glazing shall be done with Clear Glass / Pinhead Glass of approved thickness minimum 4 mm. The ventilator shall be provided with 10 mm square bright steel bars fixed at a pitch of 6 inches (150 mm c/c) on the inside for safety and security. washroom ventilator with above specifications finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 10,534.00 |
| BMT-P.84.A | Supplying and fixing of Factory-made openable window with horizontal & vertical frames from 0.60 mm thick Galvanized plain skin pass (GPSP) sheet (IS 513 'D' quality, IS 277, 120 GSM zinc), powder coated (pure polyester, 60–65 microns DFT). Frame, mullion, and shutters are roll-formed closed-box profiles with lock-seam joints (no welding or soldering). Sections: Outer frame: 100×65 mm with 20 mm architrave, Mullions: 100×65 mm Glazed & flymesh shutters: 60×25 mm each Aluminium profile (10.2×13 mm) for mesh/gasket holding All sections PUF-filled (density 32–36 kg/m³) EPDM gaskets (frame, mullions, shutters) for weather resistance Glazing shutter: fitted with glass using 8×10 mm EPDM gaskets Flymesh shutter: SS 304 mesh (32 gauge, 144 holes/sq.in), reinforced with 2.6 mm dia aluminium wire, held with 4×6 mm EPDM gaskets Grill: Bright bar grill with 10×10 mm bars inserted into frame and mullion without screws. Hardware (SS304 Grade): 1 No. 100 mm ‘D’ handle per shutter (glazed/fly mesh),2 No. 125 mm ‘S’ tower bolt for glazed shutter,2 No. 125 mm tower bolt for fly mesh shutter,3 Nos. 75 mm butt hinges per shutter,1 No. 200 mm latch stopper per shutter Fixing: Window installed in masonry/concrete using self-expanding screws, with all necessary stiffeners, support plates, nylon caps, EPDM gaskets included.Window with above specifications and Glazing Sheet in Shutter: 5 mm thick Toughened Plain Glass and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per | Sqm | 17,509.00 |
| BMT-P.84.B | Supplying and fixing of Factory-made openable window with horizontal & vertical frames from 0.60 mm thick Galvanized plain skin pass (GPSP) sheet (IS 513 'D' quality, IS 277, 120 GSM zinc), powder coated (pure polyester, 60–65 microns DFT). Frame, mullion, and shutters are roll-formed closed-box profiles with lock-seam joints (no welding or soldering). Sections: Outer frame: 100×65 mm with 20 mm architrave, Mullions: 100×65 mm Glazed & flymesh shutters: 60×25 mm each Aluminium profile (10.2×13 mm) for mesh/gasket holding All sections PUF-filled (density 32–36 kg/m³) EPDM gaskets (frame, mullions, shutters) for weather resistance Glazing shutter: fitted with glass using 8×10 mm EPDM gaskets Flymesh shutter: SS 304 mesh (32 gauge, 144 holes/sq.in), reinforced with 2.6 mm dia aluminium wire, held with 4×6 mm EPDM gaskets Grill: Bright bar grill with 10×10 mm bars inserted into frame and mullion without screws. Hardware (SS304 Grade): 1 No. 100 mm ‘D’ handle per shutter (glazed/fly mesh),2 No. 125 mm ‘S’ tower bolt for glazed shutter,2 No. 125 mm tower bolt for fly mesh shutter,3 Nos. 75 mm butt hinges per shutter,1 No. 200 mm latch stopper per shutter Fixing: Window installed in masonry/concrete using self-expanding screws, with all necessary stiffeners, support plates, nylon caps, EPDM gaskets included.Window with above specifications and Glazing Sheet in Shutter: 3.5 mm to 4 mm thick Float Glass and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 17,138.00 |
| BMT-P.84.C | Supplying and fixing of Factory-made openable window with horizontal & vertical frames from 0.60 mm thick Galvanized plain skin pass (GPSP) sheet (IS 513 'D' quality, IS 277, 120 GSM zinc), powder coated (pure polyester, 60–65 microns DFT). Frame, mullion, and shutters are roll-formed closed-box profiles with lock-seam joints (no welding or soldering). Sections: Outer frame: 100×65 mm with 20 mm architrave, Mullions: 100×65 mm Glazed & flymesh shutters: 60×25 mm each Aluminium profile (10.2×13 mm) for mesh/gasket holding All sections PUF-filled (density 32–36 kg/m³) EPDM gaskets (frame, mullions, shutters) for weather resistance Glazing shutter: fitted with glass using 8×10 mm EPDM gaskets Flymesh shutter: SS 304 mesh (32 gauge, 144 holes/sq.in), reinforced with 2.6 mm dia aluminium wire, held with 4×6 mm EPDM gaskets Grill: Bright bar grill with 10×10 mm bars inserted into frame and mullion without screws. Hardware (SS304 Grade): 1 No. 100 mm ‘D’ handle per shutter (glazed/fly mesh),2 No. 125 mm ‘S’ tower bolt for glazed shutter,2 No. 125 mm tower bolt for fly mesh shutter,3 Nos. 75 mm butt hinges per shutter,1 No. 200 mm latch stopper per shutter Fixing: Window installed in masonry/concrete using self-expanding screws, with all necessary stiffeners, support plates, nylon caps, EPDM gaskets included.Window with above specifications and Glazing Sheet in Shutter: 5 mm thick Polycarbonate Solid Clear UV resistant sheet of reputed make (UV stabilized, transparent & solid section) and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 17,994.00 |
| BMT-P.84.D | Supplying and fixing of Factory-made openable window with horizontal & vertical frames from 0.60 mm thick Galvanized plain skin pass (GPSP) sheet (IS 513 'D' quality, IS 277, 120 GSM zinc), powder coated (pure polyester, 60–65 microns DFT). Frame, mullion, and shutters are roll-formed closed-box profiles with lock-seam joints (no welding or soldering). Sections: Outer frame: 100×65 mm with 20 mm architrave, Mullions: 100×65 mm Glazed & flymesh shutters: 60×25 mm each Aluminium profile (10.2×13 mm) for mesh/gasket holding All sections PUF-filled (density 32–36 kg/m³) EPDM gaskets (frame, mullions, shutters) for weather resistance Glazing shutter: fitted with glass using 8×10 mm EPDM gaskets Flymesh shutter: SS 304 mesh (32 gauge, 144 holes/sq.in), reinforced with 2.6 mm dia aluminium wire, held with 4×6 mm EPDM gaskets Grill: Bright bar grill with 10×10 mm bars inserted into frame and mullion without screws. Hardware (SS304 Grade): 1 No. 100 mm ‘D’ handle per shutter (glazed/fly mesh),2 No. 125 mm ‘S’ tower bolt for glazed shutter,2 No. 125 mm tower bolt for fly mesh shutter,3 Nos. 75 mm butt hinges per shutter,1 No. 200 mm latch stopper per shutter Fixing: Window installed in masonry/concrete using self-expanding screws, with all necessary stiffeners, support plates, nylon caps, EPDM gaskets included.Window with above specifications and Glazing Sheet in Shutter: 5 mm thick Toughened Plain Glass and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 19,453.00 |
| BMT-P.84.E | Supplying and fixing of Factory-made openable window with horizontal & vertical frames from 0.60 mm thick Galvanized plain skin pass (GPSP) sheet (IS 513 'D' quality, IS 277, 120 GSM zinc), powder coated (pure polyester, 60–65 microns DFT). Frame, mullion, and shutters are roll-formed closed-box profiles with lock-seam joints (no welding or soldering). Sections: Outer frame: 100×65 mm with 20 mm architrave, Mullions: 100×65 mm Glazed & flymesh shutters: 60×25 mm each Aluminium profile (10.2×13 mm) for mesh/gasket holding All sections PUF-filled (density 32–36 kg/m³) EPDM gaskets (frame, mullions, shutters) for weather resistance Glazing shutter: fitted with glass using 8×10 mm EPDM gaskets Flymesh shutter: SS 304 mesh (32 gauge, 144 holes/sq.in), reinforced with 2.6 mm dia aluminium wire, held with 4×6 mm EPDM gaskets Grill: Bright bar grill with 10×10 mm bars inserted into frame and mullion without screws. Hardware (SS304 Grade): 1 No. 100 mm ‘D’ handle per shutter (glazed/fly mesh),2 No. 125 mm ‘S’ tower bolt for glazed shutter,2 No. 125 mm tower bolt for fly mesh shutter,3 Nos. 75 mm butt hinges per shutter,1 No. 200 mm latch stopper per shutter Fixing: Window installed in masonry/concrete using self-expanding screws, with all necessary stiffeners, support plates, nylon caps, EPDM gaskets included.Window with above specifications and Glazing Sheet in Shutter: 3.5 mm to 4 mm thick Float Glass and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 18,851.00 |
| BMT-P.84.F | Supplying and fixing of Factory-made openable window with horizontal & vertical frames from 0.60 mm thick Galvanized plain skin pass (GPSP) sheet (IS 513 'D' quality, IS 277, 120 GSM zinc), powder coated (pure polyester, 60–65 microns DFT). Frame, mullion, and shutters are roll-formed closed-box profiles with lock-seam joints (no welding or soldering). Sections: Outer frame: 100×65 mm with 20 mm architrave, Mullions: 100×65 mm Glazed & flymesh shutters: 60×25 mm each Aluminium profile (10.2×13 mm) for mesh/gasket holding All sections PUF-filled (density 32–36 kg/m³) EPDM gaskets (frame, mullions, shutters) for weather resistance Glazing shutter: fitted with glass using 8×10 mm EPDM gaskets Flymesh shutter: SS 304 mesh (32 gauge, 144 holes/sq.in), reinforced with 2.6 mm dia aluminium wire, held with 4×6 mm EPDM gaskets Grill: Bright bar grill with 10×10 mm bars inserted into frame and mullion without screws. Hardware (SS304 Grade): 1 No. 100 mm ‘D’ handle per shutter (glazed/fly mesh),2 No. 125 mm ‘S’ tower bolt for glazed shutter,2 No. 125 mm tower bolt for fly mesh shutter,3 Nos. 75 mm butt hinges per shutter,1 No. 200 mm latch stopper per shutter Fixing: Window installed in masonry/concrete using self-expanding screws, with all necessary stiffeners, support plates, nylon caps, EPDM gaskets included.Window with above specifications and Glazing Sheet in Shutter: 5 mm thick Polycarbonate Solid Clear UV resistant sheet of reputed make (UV stabilized, transparent & solid section) and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in- charge | Sqm | 19,793.00 |
| BMT-P.85.A | Supply & fixing GPSP Steel Casement Window without mesh (Single Rebate – All Sizes): Factory-made openable window made from 0.6 mm thick galvanized plain skin pass (GPSP) sheet (IS 513, 'D' quality, IS 277, 120 GSM zinc), powder-coated with pure polyester (60–65 microns DFT). All sections roll-formed closed box profiles with lock-seam joints; no welding/soldering used. Sections: Outer frame: 80×65 mm with 20 mm architraveWindow with above specifications and Glazing Sheet in Shutter: 5 mm thick Toughened Plain Glass and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 13,560.00 |
| BMT-P.85.B | Supply & fixing GPSP Steel Casement Window without mesh (Single Rebate – All Sizes): Factory-made openable window made from 0.6 mm thick galvanized plain skin pass (GPSP) sheet (IS 513, 'D' quality, IS 277, 120 GSM zinc), powder-coated with pure polyester (60–65 microns DFT). All sections roll-formed closed box profiles with lock-seam joints; no welding/soldering used. Sections: Outer frame: 80×65 mm with 20 mm architraveWindow with above specifications and Glazing Sheet in Shutter: 3.5 mm to 4 mm thick Float Glass and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 13,197.00 |
| BMT-P.85.C | Supply & fixing GPSP Steel Casement Window without mesh (Single Rebate – All Sizes): Factory-made openable window made from 0.6 mm thick galvanized plain skin pass (GPSP) sheet (IS 513, 'D' quality, IS 277, 120 GSM zinc), powder-coated with pure polyester (60–65 microns DFT). All sections roll-formed closed box profiles with lock-seam joints; no welding/soldering used. Sections: Outer frame: 80×65 mm with 20 mm architraveWindow with above specifications and Glazing Sheet in Shutter: 5 mm thick Polycarbonate Solid Clear UV resistant sheet of reputed make (UV stabilized, transparent & solid section) and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in- charge | Sqm | 13,940.00 |
| BMT-P.85.D | Supply & fixing GPSP Steel Casement Window without mesh (Single Rebate – All Sizes): Factory-made openable window made from 0.6 mm thick galvanized plain skin pass (GPSP) sheet (IS 513, 'D' quality, IS 277, 120 GSM zinc), powder-coated with pure polyester (60–65 microns DFT). All sections roll-formed closed box profiles with lock-seam joints; no welding/soldering used. Sections: Outer frame: 80×65 mm with 20 mm architraveWindow with above specifications and Glazing Sheet in Shutter: 5 mm thick Toughened Plain Glass and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 14,911.00 |
| BMT-P.85.E | Supply & fixing GPSP Steel Casement Window without mesh (Single Rebate – All Sizes): Factory-made openable window made from 0.6 mm thick galvanized plain skin pass (GPSP) sheet (IS 513, 'D' quality, IS 277, 120 GSM zinc), powder-coated with pure polyester (60–65 microns DFT). All sections roll-formed closed box profiles with lock-seam joints; no welding/soldering used. Sections: Outer frame: 80×65 mm with 20 mm architraveWindow with above specifications and Glazing Sheet in Shutter: 3.5 mm to 4 mm thick Float Glass and finished with polyester powder coating of minimum 60 microns of approved wood finishes | Sqm | 14,531.00 |
| BMT-P.86.A | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Two track Sliding Window with grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 98 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 65 mm x 0.8 mm thick. The outer frame shall have Two Tracks with Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners ,supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Grill: Grill having of 10 mm Sq Bright Bars inserted into outer frame Without Screws Fixing and welded at a regular pitch of 150mm to 12mm x 6 mm MS flat vertically at two points. Fixers: Touch lock to be provided for Window Shutter, Rollers, Bump Stop Base & Rubber for shutter. Infill material of Polyurethane (PUF) shall be provided in Window frame and Shutter Profile. Injected Polyurethane Foam (PUF) procedure shall be adopted. Density of Polyurethane Foam shall be 32 to 36 kg / m3.Window with above specifications and Glazing Sheet in Shutter: 3.5 mm to 4 mm thick Float Glass and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 9,680.00 |
| BMT-P.86.B | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Two track Sliding Window with grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 98 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 65 mm x 0.8 mm thick. The outer frame shall have Two Tracks with Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners ,supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Grill: Grill having of 10 mm Sq Bright Bars inserted into outer frame Without Screws Fixing and welded at a regular pitch of 150mm to 12mm x 6 mm MS flat vertically at two points. Fixers: Touch lock to be provided for Window Shutter, Rollers, Bump Stop Base & Rubber for shutter. Infill material of Polyurethane (PUF) shall be provided in Window frame and Shutter Profile. Injected Polyurethane Foam (PUF) procedure shall be adopted. Density of Polyurethane Foam shall be 32 to 36 kg / m3.Window with above specifications and Glazing Sheet in Shutter: 5 mm thick Polycarbonate Solid Clear UV resistant sheet of reputed make (UV stabilized, transparent & solid section) and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in- charge | Sqm | 10,537.00 |
| BMT-P.86.C | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Two track Sliding Window with grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 98 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 65 mm x 0.8 mm thick. The outer frame shall have Two Tracks with Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners ,supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Grill: Grill having of 10 mm Sq Bright Bars inserted into outer frame Without Screws Fixing and welded at a regular pitch of 150mm to 12mm x 6 mm MS flat vertically at two points. Fixers: Touch lock to be provided for Window Shutter, Rollers, Bump Stop Base & Rubber for shutter. Infill material of Polyurethane (PUF) shall be provided in Window frame and Shutter Profile. Injected Polyurethane Foam (PUF) procedure shall be adopted. Density of Polyurethane Foam shall be 32 to 36 kg / m3.Window with above specifications and Glazing Sheet in Shutter: 5 mm thick Toughened Plain Glass and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 11,033.00 |
| BMT-P.86.D | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Two track Sliding Window with grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 98 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 65 mm x 0.8 mm thick. The outer frame shall have Two Tracks with Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners ,supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Grill: Grill having of 10 mm Sq Bright Bars inserted into outer frame Without Screws Fixing and welded at a regular pitch of 150mm to 12mm x 6 mm MS flat vertically at two points. Fixers: Touch lock to be provided for Window Shutter, Rollers, Bump Stop Base & Rubber for shutter. Infill material of Polyurethane (PUF) shall be provided in Window frame and Shutter Profile. Injected Polyurethane Foam (PUF) procedure shall be adopted. Density of Polyurethane Foam shall be 32 to 36 kg / m3.Window with above specifications and Glazing Sheet in Shutter: 3.5 mm to 4 mm thick Float Glass and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 10,662.00 |
| BMT-P.86.E | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Two track Sliding Window with grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 98 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 65 mm x 0.8 mm thick. The outer frame shall have Two Tracks with Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners ,supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Grill: Grill having of 10 mm Sq Bright Bars inserted into outer frame Without Screws Fixing and welded at a regular pitch of 150mm to 12mm x 6 mm MS flat vertically at two points. Fixers: Touch lock to be provided for Window Shutter, Rollers, Bump Stop Base & Rubber for shutter. Infill material of Polyurethane (PUF) shall be provided in Window frame and Shutter Profile. Injected Polyurethane Foam (PUF) procedure shall be adopted. Density of Polyurethane Foam shall be 32 to 36 kg / m3.Window with above specifications and Glazing Sheet in Shutter: 5 mm thick Polycarbonate Solid Clear UV resistant sheet of reputed make (UV stabilized, transparent & solid section) and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in- charge | Sqm | 11,519.00 |
| BMT-P.87.A | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Three track Sliding Window with grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 144 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 64 mm x 0.8 mm thick. The outer frame shall have ThreeWindow with above specifications and Glazing Sheet in Shutter: 5 mm thick Toughened Plain Glass and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 11,237.00 |
| BMT-P.87.B | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Three track Sliding Window with grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 144 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 64 mm x 0.8 mm thick. The outer frame shall have ThreeWindow with above specifications and Glazing Sheet in Shutter: 3.5 mm to 4 mm thick Float Glass and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 10,866.00 |
| BMT-P.87.C | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Three track Sliding Window with grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 144 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 64 mm x 0.8 mm thick. The outer frame shall have ThreeWindow with above specifications and Glazing Sheet in Shutter: 5 mm thick Polycarbonate Solid Clear UV resistant sheet of reputed make (UV stabilized, transparent & solid section) and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in | Sqm | 11,723.00 |
| BMT-P.87.D | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Three track Sliding Window with grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 144 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 64 mm x 0.8 mm thick. The outer frame shall have ThreeWindow with above specifications and Glazing Sheet in Shutter: 5 mm thick Toughened Plain Glass and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 11,999.00 |
| BMT-P.87.E | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Three track Sliding Window with grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 144 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 64 mm x 0.8 mm thick. The outer frame shall have ThreeWindow with above specifications and Glazing Sheet in Shutter: 3.5 mm to 4 mm thick Float Glass and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 11,628.00 |
| BMT-P.87.F | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Three track Sliding Window with grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 144 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 64 mm x 0.8 mm thick. The outer frame shall have ThreeWindow with above specifications and Glazing Sheet in Shutter: 5 mm thick Polycarbonate Solid Clear UV resistant sheet of reputed make (UV stabilized, transparent & solid section) and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in- charge | Sqm | 12,485.00 |
| BMT-P.88.A | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Two track Sliding Window without grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 58.5 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 65 mm x 0.8 mm thick. The outer frame shall have Two Tracks without Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners ,supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Fixers: Touch lock to be provided forWindow with above specifications and Glazing Sheet in Shutter: 5 mm thick Toughened Plain Glass and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 8,352.00 |
| BMT-P.88.B | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Two track Sliding Window without grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 58.5 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 65 mm x 0.8 mm thick. The outer frame shall have Two Tracks without Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners ,supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Fixers: Touch lock to be provided forWindow with above specifications and Glazing Sheet in Shutter: 3.5 mm to 4 mm thick Float Glass and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 7,980.00 |
| BMT-P.88.C | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Two track Sliding Window without grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 58.5 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 65 mm x 0.8 mm thick. The outer frame shall have Two Tracks without Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners ,supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Fixers: Touch lock to be provided forWindow with above specifications and Glazing Sheet in Shutter: 5 mm thick Polycarbonate Solid Clear UV resistant sheet of reputed make (UV stabilized, transparent & solid section) and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 8,837.00 |
| BMT-P.88.D | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Two track Sliding Window without grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 58.5 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 65 mm x 0.8 mm thick. The outer frame shall have Two Tracks without Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners ,supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Fixers: Touch lock to be provided forWindow with above specifications and Glazing Sheet in Shutter: 5 mm thick Toughened Plain Glass and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 9,333.00 |
| BMT-P.88.E | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Two track Sliding Window without grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 58.5 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 65 mm x 0.8 mm thick. The outer frame shall have Two Tracks without Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners ,supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Fixers: Touch lock to be provided forWindow with above specifications and Glazing Sheet in Shutter: 3.5 mm to 4 mm thick Float Glass and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 8,962.00 |
| BMT-P.88.F | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Two track Sliding Window without grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 58.5 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 65 mm x 0.8 mm thick. The outer frame shall have Two Tracks without Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners ,supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Fixers: Touch lock to be provided forWindow with above specifications and Glazing Sheet in Shutter: 5 mm thick Polycarbonate Solid Clear UV resistant sheet of reputed make (UV stabilized, transparent & solid section) and finished with polyester powder coating of minimum 60 microns of approved | Sqm | 9,819.00 |
| BMT-P.89.A | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Three track Sliding Window without grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 104.5 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 64 mm x 0.8 mm thick. The outer frame shall have Three Tracks without Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, Fly mesh Shutter with Stainless Steel 304 grade mesh, fitted into an aluminium profile of size 10.2 mm × 13.0 mm, using 2.6 mm aluminium wire. The shutter shall be provided with Ethyl Propylene Diamine Monomer (EPDM) gasket of 4 mm × 6 mm section for securely holding the fly mesh, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners, supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Fixers: Touch lock to be provided for Window Shutter, Rollers, Bump Stop Base & Rubber for shutter. Infill material of Polyurethane (PUF) shall be provided in Window frame and Shutter Profile. Injected Polyurethane Foam (PUF) procedure shall be adopted. Density of Polyurethane Foam shall be 32 to 36 kg / m3. Landing cost – including loading, cost of conveyance, unloading.Window with above specifications and Glazing Sheet in Shutter: 5 mm thick Toughened Plain Glass and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 9,537.00 |
| BMT-P.89.B | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Three track Sliding Window without grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 104.5 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 64 mm x 0.8 mm thick. The outer frame shall have Three Tracks without Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, Fly mesh Shutter with Stainless Steel 304 grade mesh, fitted into an aluminium profile of size 10.2 mm × 13.0 mm, using 2.6 mm aluminium wire. The shutter shall be provided with Ethyl Propylene Diamine Monomer (EPDM) gasket of 4 mm × 6 mm section for securely holding the fly mesh, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners, supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Fixers: Touch lock to be provided for Window Shutter, Rollers, Bump Stop Base & Rubber for shutter. Infill material of Polyurethane (PUF) shall be provided in Window frame and Shutter Profile. Injected Polyurethane Foam (PUF) procedure shall be adopted. Density of Polyurethane Foam shall be 32 to 36 kg / m3. Landing cost – including loading, cost of conveyance, unloading.Window with above specifications and Glazing Sheet in Shutter: 3.5 mm to 4 mm thick Float Glass and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 9,166.00 |
| BMT-P.89.C | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Three track Sliding Window without grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 104.5 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 64 mm x 0.8 mm thick. The outer frame shall have Three Tracks without Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, Fly mesh Shutter with Stainless Steel 304 grade mesh, fitted into an aluminium profile of size 10.2 mm × 13.0 mm, using 2.6 mm aluminium wire. The shutter shall be provided with Ethyl Propylene Diamine Monomer (EPDM) gasket of 4 mm × 6 mm section for securely holding the fly mesh, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners, supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Fixers: Touch lock to be provided for Window Shutter, Rollers, Bump Stop Base & Rubber for shutter. Infill material of Polyurethane (PUF) shall be provided in Window frame and Shutter Profile. Injected Polyurethane Foam (PUF) procedure shall be adopted. Density of Polyurethane Foam shall be 32 to 36 kg / m3. Landing cost – including loading, cost of conveyance, unloading.Window with above specifications and Glazing Sheet in Shutter: 5 mm thick Polycarbonate Solid Clear UV resistant sheet of reputed make (UV stabilized, transparent & solid section) and finished with polyester powder coating of minimum 60 microns of approved RAL colours and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 10,023.00 |
| BMT-P.89.D | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Three track Sliding Window without grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 104.5 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 64 mm x 0.8 mm thick. The outer frame shall have Three Tracks without Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, Fly mesh Shutter with Stainless Steel 304 grade mesh, fitted into an aluminium profile of size 10.2 mm × 13.0 mm, using 2.6 mm aluminium wire. The shutter shall be provided with Ethyl Propylene Diamine Monomer (EPDM) gasket of 4 mm × 6 mm section for securely holding the fly mesh, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners, supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Fixers: Touch lock to be provided for Window Shutter, Rollers, Bump Stop Base & Rubber for shutter. Infill material of Polyurethane (PUF) shall be provided in Window frame and Shutter Profile. Injected Polyurethane Foam (PUF) procedure shall be adopted. Density of Polyurethane Foam shall be 32 to 36 kg / m3. Landing cost – including loading, cost of conveyance, unloading.Window with above specifications and Glazing Sheet in Shutter: 5 mm thick Toughened Plain Glass and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 10,299.00 |
| BMT-P.89.E | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Three track Sliding Window without grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 104.5 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 64 mm x 0.8 mm thick. The outer frame shall have Three Tracks without Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, Fly mesh Shutter with Stainless Steel 304 grade mesh, fitted into an aluminium profile of size 10.2 mm × 13.0 mm, using 2.6 mm aluminium wire. The shutter shall be provided with Ethyl Propylene Diamine Monomer (EPDM) gasket of 4 mm × 6 mm section for securely holding the fly mesh, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners, supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Fixers: Touch lock to be provided for Window Shutter, Rollers, Bump Stop Base & Rubber for shutter. Infill material of Polyurethane (PUF) shall be provided in Window frame and Shutter Profile. Injected Polyurethane Foam (PUF) procedure shall be adopted. Density of Polyurethane Foam shall be 32 to 36 kg / m3. Landing cost – including loading, cost of conveyance, unloading.Window with above specifications and Glazing Sheet in Shutter: 3.5 mm to 4 mm thick Float Glass and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 9,928.00 |
| BMT-P.89.F | Supply & fixing of Factory made Galvanized plain skin pass (GPSP) Three track Sliding Window without grill provision of (all sizes) having horizontal & vertical frames , Base steel as per IS 513 of 0.80 mm thick ‘D’ Quality galvanized plain skin pass (GPSP) Sheet as per IS 277, with Zinc coating of 120 GSM, Pure Polyester powder coated paint of 60 - 65 microns (DFT) thick and Outer frame of 104.5 mm x 50 mm x 0.8 mm thick and shutter section of 38 mm x 64 mm x 0.8 mm thick. The outer frame shall have Three Tracks without Grill Provision and each track have integrated guide tracks of 12.5 mm width and 20 mm deep for provision to slide the Shutter and facilitates with a water drain outlet component made of PVC and shutter with Glazing Sheet fitted with Ethyl Propylene Diamine Monomer (EPDM) gaskets section size of 8.0 mm x 10.0 mm for holding, Fly mesh Shutter with Stainless Steel 304 grade mesh, fitted into an aluminium profile of size 10.2 mm × 13.0 mm, using 2.6 mm aluminium wire. The shutter shall be provided with Ethyl Propylene Diamine Monomer (EPDM) gasket of 4 mm × 6 mm section for securely holding the fly mesh, including infill material of polyurethane foam (PUF) and all fixers including all stiffeners, supporting plates, Stainless Steel 304 grade screws, Nylon caps, EPDM rubber gasket etc. Fixers: Touch lock to be provided for Window Shutter, Rollers, Bump Stop Base & Rubber for shutter. Infill material of Polyurethane (PUF) shall be provided in Window frame and Shutter Profile. Injected Polyurethane Foam (PUF) procedure shall be adopted. Density of Polyurethane Foam shall be 32 to 36 kg / m3. Landing cost – including loading, cost of conveyance, unloading.Window with above specifications and Glazing Sheet in Shutter: 5 mm thick Polycarbonate Solid Clear UV resistant sheet of reputed make (UV stabilized, transparent & solid section) and finished with polyester powder coating of minimum 60 microns of approved wood finishes and shades all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge | Sqm | 10,785.00 |
Other chapters in this schedule
- Bricks & Building Blocks (21)
- Natural Flooring Stones (23)
- Wall & Floor Tiles (40)
- Paving & Interlocking Tiles (25)
- Timber & Roofing Materials (23)
- Steel Materials (26)
- Fixtures for Doors & Windows (103)
- Construction Chemicals & Admixtures (89)
- Glass Materials (21)
- Paints & Polishes (42)
- Particle Boards (110)
- Plywoods, Laminates & Veneers (31)
- Ceilings, Wall Partitions & Wall Linings (103)
- Doors, Shutters & Frames (113)
- Structural Glazing & Curtain Walling (6)
- Dismantling (13)
- Expansion Joint Fillers (11)
- Miscellaneous Items (305)
- Expansion Joints (6)
- Energy Efficient Items (33)
- S.W.G. Pipes & Fittings (62)
- Man Holes & Inspection Chambers as per IS 4111 : Part 1 : 1986 (6)
- C.I. Pipes & Fittings as per IS 1729:1979 (41)
- Vitreous Chinaware Sanitary Appliances as per IS:2556 – 1974 (39)
- Taps & Faucets (6)
- G.I. Pipes & Fittings (15)
- PVC Pipes & Fittings (26)
- M.S. Conduit Pipes (51)
- PVC Conduits (36)
- Hot Dip Galvanized Metal Boxes for Switch Boards (9)
- T.W. Boards (25)
- Copper Flexible Cables (as per IS:694) (66)
- Service Mains and Flat Cable for Submersible Motors (16)
- Flush Type Switches and Accessories (27)
- Modular Switches and Accessories (49)
- Panel Mounting Switch Disconnector Fuse Units (sdfu) (10)
- On Load Changeover Switches (open Execution) (10)
- Auto Transfer Switch (14)
- Rewirable / Double Break Switches in SS Enclosure (12)
- Hrc Fuse Links (DIN/BOLTED Type) (6)
- Porcelain Rewirable Fuse Units (6)
- Panel Mounting MCCBs (113)
- MCBs (as per IS:60898-1:2002) (23)
- Isolators Confirms to I E C 60947 PART-III (22)
- RCCBs (ELCB/RCD) Confirms to IEC:61008 and IS:12640-1 (22)
- MCB Distribution Boards (as per IS 8623; IS 13032; Iec 61439-3) (44)
- Automatic Street Light Control Systems (12)
- Flourscent Tubes / CFL Lamps / LED Bulbs (5)
- LED Luminaires Indoor (74)
- U.G. Cables (135)
- Cable Trays (19)
- Double Walled Corrugated HDPE Pipe (8)
- Fans (18)
- Water Heaters (conventional & Solar) (14)
- Accessories for Water Heaters (11)
- Pumpsets (96)
- Air Conditioners (15)
- HVAC SYSTEMS(VRV/VRF) (70)
- Stabilizers (10)
- Repairing of Fans, Coolers, Pumps, Motors, Fridges and Airconditioners (76)
- Swaged / Octagonal Poles and Garden Posts (49)
- LT Panel and Accessories (33)
- Sub Station Equipment and Transformers (18)
- Maintenance and Repairs of Transformers (21)
- Overhead Lines& Line Materials (27)
- Lightening Protective System (16)
- Earthing (19)
- Local Area Network (59)
- Raceways and Junction Boxes (9)
- Computers, Printers and Scanners (16)
- Small System (7)
- Large EPABX System (16)
- C.C.TV & Surveillance System (16)
- Public Address Systems (15)
- AUDIO-VIDEO Systems (32)
- Legend Plates (8)
- Copper / Aluminium / G.I. Items (per Kg) (6)
- SMC Type Supports for the Busbars (36)
- Addressable - Fire Alarm System (27)
- Conventional - Fire Alarm System (14)
- Powder Based Fire Extinguishers (18)
- Fire Hydrant and Sprinkler System (58)
- Generators Specification (7)
- Inverters and Online UPS Systems (34)
- Temporary Illumination (57)
- Lifts (new Installation) (9)
- Medical Gas Pipeline System (10)
- Building Management Systems (21)
Pricing windows against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works