R/ANDHRA PRADESH SOR 2026-27
Swaged / Octagonal Poles and Garden Posts rates
49 swaged / octagonal poles and garden posts items from the Board of Chief Engineers, Government of Andhra Pradesh, effective 2026-06-01.
- Items
- 49
- Lowest rate
- ₹79.00
- Highest rate
- ₹2,10,095.00
- Effective from
- 2026-06-01
S-01/RATE ITEMS49 ITEMS
Swaged / Octagonal Poles and Garden Posts rates in the Andhra Pradesh Common Schedule of Rates — Part-III (Buildings, Water Supply & Electrical) 2026-27 run from ₹79.00 to ₹2,10,095.00. Transcribed from Government of Andhra Pradesh — Common Schedule of Rates 2026-27, Part-III (Buildings), Board of Chief Engineers. For reference only: verify against the official source before pricing a bid.
/
Unit
49 items. Scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| MAT-05544 | Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S355J0 steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet and MCB's as per IS specification suitable to withstand the wind speed of 180KMPH for 9 Mtrs mounting height Pole having dimensions bottom 185 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x 20mm and 4 Nos of M24 x 1000 long 'J' bolts along with templates. Including Supply of1.5M Dragon type decorative. Makes: As per list of recommended brands.Double arm Galvanize finished bracket | Nos | 26,483.00 |
| MAT-05545 | Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S355J0 steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet and MCB's as per IS specification suitable to withstand the wind speed of 180KMPH for 9 Mtrs mounting height Pole having dimensions bottom 185 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x 20mm and 4 Nos of M24 x 1000 long 'J' bolts along with templates. Including Supply of1.5M Dragon type decorative. Makes: As per list of recommended brands.Single arm Galvanize finished bracket | Nos | 24,011.00 |
| MAT-03937 | Fabrication, Transportation and supply of hot-dip ..................PU Paint finish curved Octagonal Pole with BSEN - 10025 grade S355J0 steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet and MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs mounting height Curved Pole having dimensions Bottom 180 mm,. Top 85mm with 3mm thick, base plate 400 x 400 x 20mm and 4 Nos of M24 x 750 long 'J' bolts along with templates. Including Supply of 0.2M long Single arm bracket. Makes: As per list of recommended brands.Galvanized | Nos | 26,247.00 |
| MAT-05546 | Fabrication, Transportation and supply of hot-dip ..................PU Paint finish curved Octagonal Pole with BSEN - 10025 grade S355J0 steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet and MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs mounting height Curved Pole having dimensions Bottom 180 mm,. Top 85mm with 3mm thick, base plate 400 x 400 x 20mm and 4 Nos of M24 x 750 long 'J' bolts along with templates. Including Supply of 0.2M long Single arm bracket. Makes: As per list of recommended brands.Galvanized PU paint finished | Nos | 35,545.00 |
| MAT-03956 | Supply of ……. Sizes thermo-plastic cable junction boxes with IP66/67 weatherproof, for outdoor installation with knockouts for cable entry including terminals etc., complete (sizes in mm). Makes: As per list of recommended brands.155 X 210 X 92 | Nos | 1,893.00 |
| MAT-03957 | Supply of ……. Sizes thermo-plastic cable junction boxes with IP66/67 weatherproof, for outdoor installation with knockouts for cable entry including terminals etc., complete (sizes in mm). Makes: As per list of recommended brands.205 X 255 X112 | Nos | 2,754.00 |
| MAT-03958 | Supply of ……. Sizes thermo-plastic cable junction boxes with IP66/67 weatherproof, for outdoor installation with knockouts for cable entry including terminals etc., complete (sizes in mm). Makes: As per list of recommended brands.225 X 295 X 122 | Nos | 9,695.00 |
| MAT-03959 | Supply of ……. Sizes thermo-plastic cable junction boxes with IP66/67 weatherproof, for outdoor installation with knockouts for cable entry including terminals etc., complete (sizes in mm). Makes: As per list of recommended brands.255 X 600 X 170 | Nos | 10,670.00 |
| MAT-03964 | Supply and transportation of following glass reinforced polymer (GRP) composite type Conical pole with single arm bracket of length 1Mtr and internal junction box including labour charges etc., complete. Makes: As per list of recommended brands.…do…. 3.00 Mtrs height, Bottom dia 143mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr | Nos | 10,005.00 |
| MAT-03965 | Supply and transportation of following glass reinforced polymer (GRP) composite type Conical pole with single arm bracket of length 1Mtr and internal junction box including labour charges etc., complete. Makes: As per list of recommended brands.…do…. 4.00 Mtrs height, Bottom dia 143mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr | Nos | 12,712.00 |
| MAT-03966 | Supply and transportation of following glass reinforced polymer (GRP) composite type Conical pole with single arm bracket of length 1Mtr and internal junction box including labour charges etc., complete. Makes: As per list of recommended brands.…do…. 6.00 Mtrs height, Bottom dia 143mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr | Nos | 15,890.00 |
| MAT-03967 | Supply and transportation of following glass reinforced polymer (GRP) composite type Conical pole with single arm bracket of length 1Mtr and internal junction box including labour charges etc., complete. Makes: As per list of recommended brands.…do…. 8.00 Mtrs height, Bottom dia 193mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr | Nos | 20,480.00 |
| MAT-03968 | Supply and transportation of following glass reinforced polymer (GRP) composite type Conical pole with single arm bracket of length 1Mtr and internal junction box including labour charges etc., complete. Makes: As per list of recommended brands.…do…. 9.00 Mtrs height, Bottom dia 210mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr | Nos | 22,363.00 |
| MAT-03969 | Supply and transportation of following glass reinforced polymer (GRP) composite type Conical pole with single arm bracket of length 1Mtr and internal junction box including labour charges etc., complete. Makes: As per list of recommended brands.…do…. 10.00 Mtrs height, Bottom dia 227mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr | Nos | 32,368.00 |
| MAT-03970 | Supply and transportation of base bracket suitable for glass reinforced polymer (GRP) composite type pole including labour charges etc., complete. Makes: As per list of recommended brands.…do…. For 3.00 Mtrs Pole | Nos | 1,824.00 |
| MAT-03971 | Supply and transportation of base bracket suitable for glass reinforced polymer (GRP) composite type pole including labour charges etc., complete. Makes: As per list of recommended brands.…do…. For 4.00 Mtrs Pole | Nos | 1,824.00 |
| MAT-03972 | Supply and transportation of base bracket suitable for glass reinforced polymer (GRP) composite type pole including labour charges etc., complete. Makes: As per list of recommended brands.…do…. For 6.00 Mtrs Pole | Nos | 2,177.00 |
| MAT-03973 | Supply and transportation of base bracket suitable for glass reinforced polymer (GRP) composite type pole including labour charges etc., complete. Makes: As per list of recommended brands.…do…. For 8.00 Mtrs Pole | Nos | 2,531.00 |
| MAT-03974 | Supply and transportation of base bracket suitable for glass reinforced polymer (GRP) composite type pole including labour charges etc., complete. Makes: As per list of recommended brands.…do…. For 9.00 Mtrs Pole | Nos | 4,826.00 |
| MAT-03975 | Supply and transportation of base bracket suitable for glass reinforced polymer (GRP) composite type pole including labour charges etc., complete. Makes: As per list of recommended brands.…do…. For 10.00 Mtrs Pole | Nos | 6,003.00 |
| ELEC-6.1.1 | Fabrication, supply and transportation of all sizes swaged poles up to site confirming to IS 2713 / 1980 specifications. The pole should be painted with primary coat of red oxide and black bituminous paint up to ground level with base plate, including cost of all materials etc., complete. (Rate per K. G) | KG | 88.00 |
| ELEC-6.1.2 | Fabrication and Supply of M.S. Poles for garden posts with 'B' class 60.25mm outer dia with base plate and suitable pole cap including cost and conveyance of all material including fixing of luminaire and labour charges etc., complete. (Rate per K. G) | KG | 79.00 |
| ELEC-6.1.3 | Supply of different sizes of M. S. Pipe brackets (Rate per K.G) | KG | 79.00 |
| ELEC-6.1.4 | Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S355J0 steel plate for shaft, IS 2062 for base plate with hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.5 Mtrs height Pole having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with template. Makes: As per list of recommended brands | Nos | 14,811.00 |
| ELEC-6.1.5 | Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S355J0 steel plate for shaft, IS 2062 for base plate with Hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs height Pole having dimensions Bottom 155 mm,. Top 70mm with 3mm thick, base plate 260 x 260 x 16mm and 4 Nos of M24 x 750 long 'J' bolts along with template. Makes: As per list of recommended brands | Nos | 20,009.00 |
| ELEC-6.1.6 | Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S355J0 steel plate for shaft, IS 2062 for base plate with hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 10 Mtrs height Pole having dimensions Bottom 175 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x16mm and 4 Nos of M24 x 750 long 'J' bolts along with template. Makes: As per list of recommended brands | Nos | 21,998.00 |
| ELEC-6.1.7 | Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S355J0 steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 12 mtrs height Pole having dimensions Bottom 240mm, Top 100mm with 4mm thick, base plate 320 x320 x20mm and 4 Nos of M24 x 850 long 'J' bolts along with template. Makes: As per list of recommended brands | Nos | 31,779.00 |
| ELEC-6.1.11 | Fabrication, Transportation and supply of 1.0 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. (The design should be approved from field Engineers) | Nos | 1,530.00 |
| ELEC-6.1.12 | Fabrication, Transportation and supply of 1.50 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. (The design should be approved from field Engineers) | Nos | 2,024.00 |
| ELEC-6.1.13 | Fabrication, Transportation and supply of 1 Mtr length Double Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. (The design should be approved from field Engineers) | Nos | 1,895.00 |
| ELEC-6.1.14 | Fabrication, Transportation and supply of 1.5 Mtr length Double Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. (The design should be approved from field Engineers) | Nos | 3,413.00 |
| ELEC-6.1.15 | Fabrication, Transportation and supply of 1.5 Mtr Length Single Arm suitable size decorative galvanized bracket with PU paint colour finish etc complete. (The design should be approved from field Engineers) | Nos | 5,650.00 |
| ELEC-6.1.16 | Fabrication, Transportation and supply of 1.5 Mtr length double arm suitable size decorative galvanized bracket with PU paint colour finish etc complete. (The design should be approved from field Engineers) | Nos | 10,711.00 |
| ELEC-6.1.17 | Fabrication, Transportation and supply of 1.5mtrs sword type or any decorative double arm bracket with dooms either side complete with all accessories with MS galvanized 40mm / 50mm dia Pipe. (The design should be approved from field Engineers) | Nos | 6,238.00 |
| ELEC-6.1.18 | Fabrication, Transportation and supply of 1.5mtrs sword type or any decorative Single arm bracket with dooms either side complete with all accessories with MS galvanized 40mm / 50mm dia Pipe. (The design should be approved from field Engineers) | Nos | 4,826.00 |
| ELEC-6.1.19 | Fabrication, Transportation and supply of 1.0mtrs sword type or any decorative double arm bracket with dooms either side complete with all accessories with MS galvanized 40mm / 50mm dia Pipe. (The design should be approved from field Engineers) | Nos | 5,061.00 |
| ELEC-6.1.20 | Fabrication, Transportation and supply of 1.0 mtrs sword type or any decorative Single arm bracket with dooms either side complete with all accessories with MS galvanized 40mm / 50mm dia Pipe. (The design should be approved from field Engineers) | Nos | 4,237.00 |
| ELEC-6.1.21 | Fabrication, transportation and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of bottom 360mm and top 150mm dia BSEN - 10025 grade S355J0 steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity, and GI Pipe ring suitable for fixing luminaires with LED type aviation twin | Nos | 1,23,585.00 |
| ELEC-6.1.22 | Fabrication, transportation and supply of 16 Mtrs Polygon High Mast with two sections of bottom 4mm thick and top section with 3mm thick with GLS type aviation lamp of Bottom 360mm and Top 150mm dia with BSEN - 10025 grade S355J0 steel plate for shaft, IS 2062 for base plate, having a base plate of size 560mm dia 25mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity and GI Pipe ring suitable for fixing luminaires with LED type aviation twin lamp. Makes: As per list of recommended brands | Nos | 1,62,426.00 |
| ELEC-6.1.23 | Fabrication, transportation and supply of 20 Mtrs Polygon High Mast with two sections of bottom 4mm thick and top section with 3mm thick of bottom 460mm and top 150mm dia with BSEN - 10025 grade S355J0 steel plate for shaft, IS 2062 for base plate, having a base plate of size 670mm dia 25mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M30 x 750 mm foundation bolts of required quantity and GI Pipe ring suitable for fixing luminaires with LED type aviation twin lamp. Makes: As per list of recommended brands | Nos | 2,10,095.00 |
| ELEC-6.1.24 | Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes: As per list of recommended brands | Nos | 21,539.00 |
| ELEC-6.1.25 | Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 9 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes: As per list of recommended brands | Nos | 22,245.00 |
| ELEC-6.1.26 | Earth work excavation with an approximate quantity of 4.0 Cum for erection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for erection of High Mast and carriage etc complete | Nos | 37,113.00 |
| ELEC-6.1.27 | Earth work excavation with an approximate quantity of 6.0 Cum for erection of 16 Mtrs high mast and refilling with a quantity of 0.65 Cum of PCC 1:4:8, 2.60 Cum M 20 grade concrete and (110 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for erection of High Mast and carriage etc complete | Nos | 46,391.00 |
| ELEC-6.1.28 | Earth work excavation with an approximate quantity of 7.0 Cum for erection of 20 Mtrs high mast and refilling with a quantity of 0.75 Cum of PCC 1:4:8, 3.60 Cum M20 grade concrete and (140 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for erection of High Mast and carriage etc complete | Nos | 59,590.00 |
| ELEC-6.1.30 | Erection charges for 7.50 Mts long Octagonal pole on bridge kerb portion with 4 Nos, 8" Anchor bolts with chemical treatment with suitable "J" type bolts etc duly drilling holes to RCC slab with V.C.C. M.15 concrete for suitable base concreting with necessary steel reinforcement work and curing for 7 days etc. including cost and conveyance of all material and all labour charges etc., complete as directed by the department officers | Job | 5,873.00 |
| ELEC-6.1.31 | Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by | Job | 6,851.00 |
| ELEC-6.1.32 | Foundation and erection charges with special T&P, for 9.00Mtrs / 10Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete | Job | 9,229.00 |
| ELEC-6.1.33 | Foundation and erection charges with special T&P, for 12Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.67Mtr x 0.67Mtrs x 1.50 Mtr size M20 cc work vibrated concreting mixing with necessary steel (20kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete | Job | 11,327.00 |
S-02/SOURCE RECORD2026-27
- ISSUED BY
- Board of Chief Engineers, Government of Andhra Pradesh
- EFFECTIVE
- 2026-06-01Parts I, II and IV of the 2026-27 schedule — Water Resources, Roads & Bridges, and Public Health — are not reproduced here. See the official source for those.
- RETRIEVED
- 2026-07-29
S-03/CHAPTERS88 MORE
Other chapters in this schedule
- Bricks & Building Blocks21
- Natural Flooring Stones23
- Wall & Floor Tiles40
- Paving & Interlocking Tiles25
- Timber & Roofing Materials23
- Steel Materials26
- Fixtures for Doors & Windows103
- Construction Chemicals & Admixtures89
- Glass Materials21
- Paints & Polishes42
- Particle Boards110
- Plywoods, Laminates & Veneers31
SHOW ALL 88 CHAPTERS
- Ceilings, Wall Partitions & Wall Linings103
- Doors, Shutters & Frames113
- Windows99
- Structural Glazing & Curtain Walling6
- Dismantling13
- Expansion Joint Fillers11
- Miscellaneous Items305
- Expansion Joints6
- Energy Efficient Items33
- S.W.G. Pipes & Fittings62
- Man Holes & Inspection Chambers as per IS 4111 : Part 1 : 19866
- C.I. Pipes & Fittings as per IS 1729:197941
- Vitreous Chinaware Sanitary Appliances as per IS:2556 – 197439
- Taps & Faucets6
- G.I. Pipes & Fittings15
- PVC Pipes & Fittings26
- M.S. Conduit Pipes51
- PVC Conduits36
- Hot Dip Galvanized Metal Boxes for Switch Boards9
- T.W. Boards25
- Copper Flexible Cables (as per IS:694)66
- Service Mains and Flat Cable for Submersible Motors16
- Flush Type Switches and Accessories27
- Modular Switches and Accessories49
- Panel Mounting Switch Disconnector Fuse Units (sdfu)10
- On Load Changeover Switches (open Execution)10
- Auto Transfer Switch14
- Rewirable / Double Break Switches in SS Enclosure12
- Hrc Fuse Links (DIN/BOLTED Type)6
- Porcelain Rewirable Fuse Units6
- Panel Mounting MCCBs113
- MCBs (as per IS:60898-1:2002)23
- Isolators Confirms to I E C 60947 PART-III22
- RCCBs (ELCB/RCD) Confirms to IEC:61008 and IS:12640-122
- MCB Distribution Boards (as per IS 8623; IS 13032; Iec 61439-3)44
- Automatic Street Light Control Systems12
- Flourscent Tubes / CFL Lamps / LED Bulbs5
- LED Luminaires Indoor74
- U.G. Cables135
- Cable Trays19
- Double Walled Corrugated HDPE Pipe8
- Fans18
- Water Heaters (conventional & Solar)14
- Accessories for Water Heaters11
- Pumpsets96
- Air Conditioners15
- HVAC SYSTEMS(VRV/VRF)70
- Stabilizers10
- Repairing of Fans, Coolers, Pumps, Motors, Fridges and Airconditioners76
- LT Panel and Accessories33
- Sub Station Equipment and Transformers18
- Maintenance and Repairs of Transformers21
- Overhead Lines& Line Materials27
- Lightening Protective System16
- Earthing19
- Local Area Network59
- Raceways and Junction Boxes9
- Computers, Printers and Scanners16
- Small System7
- Large EPABX System16
- C.C.TV & Surveillance System16
- Public Address Systems15
- AUDIO-VIDEO Systems32
- Legend Plates8
- Copper / Aluminium / G.I. Items (per Kg)6
- SMC Type Supports for the Busbars36
- Addressable - Fire Alarm System27
- Conventional - Fire Alarm System14
- Powder Based Fire Extinguishers18
- Fire Hydrant and Sprinkler System58
- Generators Specification7
- Inverters and Online UPS Systems34
- Temporary Illumination57
- Lifts (new Installation)9
- Medical Gas Pipeline System10
- Building Management Systems21
ARCHED / ESTIMATING
Pricing swaged / octagonal poles and garden posts against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index and catching where rates have moved since the base edition takes time and is easy to get wrong. We can do it for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.