R/ANDHRA PRADESH SOR 2026-27
Panel Mounting MCCBs rates
113 panel mounting mccbs items from the Board of Chief Engineers, Government of Andhra Pradesh, effective 2026-06-01.
- Items
- 113
- Lowest rate
- ₹5,826.00
- Highest rate
- ₹4,01,220.00
- Effective from
- 2026-06-01
S-01/RATE ITEMS113 ITEMS
Panel Mounting MCCBs rates in the Andhra Pradesh Common Schedule of Rates — Part-III (Buildings, Water Supply & Electrical) 2026-27 run from ₹5,826.00 to ₹4,01,220.00. Transcribed from Government of Andhra Pradesh — Common Schedule of Rates 2026-27, Part-III (Buildings), Board of Chief Engineers. For reference only: verify against the official source before pricing a bid.
/
Unit
113 items. Scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| MAT-02953 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I63-100A 3 Pole MCCB,16 KA | Nos | 8,286.00 |
| MAT-02954 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I63-100A 4 Pole MCCB,16 KA | Nos | 8,933.00 |
| MAT-02955 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I125A 3 Pole MCCB,25 KA | Nos | 9,710.00 |
| MAT-02956 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I125A 4 Pole MCCB,25 KA | Nos | 11,264.00 |
| MAT-02957 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I160A 3 Pole MCCB,25 KA | Nos | 12,300.00 |
| MAT-02958 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I160A 4 Pole MCCB,25 KA | Nos | 15,795.00 |
| MAT-02959 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I250A 3 Pole MCCB,36/35 KA | Nos | 20,068.00 |
| MAT-02960 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I250A 4 Pole MCCB,36/35 KA | Nos | 26,477.00 |
| MAT-02961 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I400A 3 Pole MCCB,36/35 KA | Nos | 26,336.00 |
| MAT-02962 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I400A 4 Pole MCCB,36/35 KA | Nos | 33,015.00 |
| MAT-02963 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I630A 3 Pole MCCB,50 KA | Nos | 39,488.00 |
| MAT-02964 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I630A 4 Pole MCCB,50 KA | Nos | 48,551.00 |
| MAT-02965 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I800A 3 Pole MCCB,50 KA | Nos | 72,503.00 |
| MAT-02966 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category I800A 4 Pole MCCB,50 KA | Nos | 77,682.00 |
| MAT-02967 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category II63-100A 3 Pole MCCB,16 KA | Nos | 5,826.00 |
| MAT-02968 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category II63-100A 4 Pole MCCB,16 KA | Nos | 7,575.00 |
| MAT-02969 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category II125A 3 Pole MCCB,25 KA | Nos | 7,380.00 |
| MAT-02970 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category II125A 4 Pole MCCB,25 KA | Nos | 9,646.00 |
| MAT-02971 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category II160A 3 Pole MCCB,25 KA | Nos | 10,099.00 |
| MAT-02973 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category II250A 3 Pole MCCB,36/35 KA | Nos | 19,679.00 |
| MAT-02974 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category II250A 4 Pole MCCB,36/35 KA | Nos | 23,822.00 |
| MAT-02975 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category II400A 3 Pole MCCB,36/35 KA | Nos | 24,729.00 |
| MAT-02976 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category II400A 4 Pole MCCB,36/35 KA | Nos | 29,649.00 |
| MAT-02977 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category II630A 3 Pole MCCB,50 KA | Nos | 34,957.00 |
| MAT-02978 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category II630A 4 Pole MCCB,50 KA | Nos | 42,207.00 |
| MAT-02979 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category II800A 3 Pole MCCB,50 KA | Nos | 60,204.00 |
| MAT-02980 | Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity ………. with thermal magnetic release Panel Mounted. Makes: As per list of recommended brands as category II800A 4 Pole MCCB,50 KA | Nos | 67,324.00 |
| MAT-02981 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I630A, 3 Pole, 50kA, electrically operated, fixed type | Nos | 1,38,220.00 |
| MAT-02982 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I630A, 3 Pole, 50kA, electrically operated, manually draw out type | Nos | 1,58,458.00 |
| MAT-02983 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I630A, 4 Pole, 50kA, electrically operated, fixed type | Nos | 1,65,297.00 |
| MAT-02984 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I630A, 4 Pole, 50kA electrically operated, manually draw out type | Nos | 1,98,847.00 |
| MAT-02985 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I800A, 3 Pole, 50kA electrically operated, manually draw out type | Nos | 1,58,458.00 |
| MAT-02986 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I800A, 4 Pole, 50kA electrically operated, manually draw out type | Nos | 2,00,542.00 |
| MAT-02987 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I1000A, 3 Pole, 50kA electrically operated, manually draw out type | Nos | 1,64,805.00 |
| MAT-02988 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I1000A, 4 Pole, 50kA electrically operated, manually draw out type | Nos | 2,08,263.00 |
| MAT-02989 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I1250A, 3 Pole, 50kA electrically operated, manually draw out type | Nos | 1,81,805.00 |
| MAT-02990 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I1250A, 4 Pole, 50kA electrically operated, manually draw out type | Nos | 2,29,424.00 |
| MAT-02991 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I1600A, 3 Pole, 50kA electrically operated, manually draw out type | Nos | 2,06,771.00 |
| MAT-02992 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I1600A, 4 Pole, 50kA electrically operated, manually draw out type | Nos | 2,54,297.00 |
| MAT-02993 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I2000A, 3 Pole, 75kA electrically operated, manually draw out type | Nos | 2,42,873.00 |
| MAT-02994 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I2000A, 4 Pole, 75kA electrically operated, manually draw out type | Nos | 2,98,322.00 |
| MAT-02995 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I2500A, 3 Pole, 75kA electrically operated, manually draw out type | Nos | 3,00,246.00 |
| MAT-02996 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I2500A, 4 Pole, 75kA electrically operated, manually draw out type | Nos | 3,61,814.00 |
| MAT-02997 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I3200A, 3 Pole, 75kA electrically operated, manually draw out type | Nos | 3,39,653.00 |
| MAT-02998 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category I3200A, 4 Pole, 75kA electrically operated, manually draw out type | Nos | 4,01,220.00 |
| MAT-02999 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category II630A, 3 Pole, 50kA, electrically operated, fixed type | Nos | 1,24,398.00 |
| MAT-03000 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category II630A, 3 Pole, 50kA, electrically operated, manually draw out type | Nos | 1,42,612.00 |
| MAT-03001 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category II630A, 4 Pole, 50kA, electrically operated, fixed type | Nos | 1,48,767.00 |
| MAT-03002 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category II630A, 4 Pole, 50kA electrically operated, manually draw out type | Nos | 1,78,963.00 |
| MAT-03003 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category II800A, 3 Pole, 50kA electrically operated, manually draw out type | Nos | 1,42,612.00 |
| MAT-03004 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category II800A, 4 Pole, 50kA electrically operated, manually draw out type | Nos | 1,80,488.00 |
| MAT-03005 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category II1000A, 3 Pole, 50kA electrically operated, manually draw out type | Nos | 1,48,325.00 |
| MAT-03006 | Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having overload, shot circuit and earth fault protection with display and 20 faults History backup with BMS compatible communication ports. Makes: As per list of recommended brands as category II1000A, 4 Pole, 50kA electrically operated, manually draw out type | Nos | 1,87,436.00 |
| MAT-03007 | Supply, installation, testing and commissioning of ........Amp, ........KA breaking capacity (100% Neutral busbar) air insulated compact Raising mains/Bus Duct system made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 0.8 mm having degree of protection of IP 55 as per IEC/EN 61439-6, PVC/Plastic insulated reinforced with glass fibre four strip ALUMINIUM busbar in convenient sections including necessary end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. System etc., with necessary joints Fire barrier at each floor Provision of tapping at each floor/every meter, continuous earthing with 2 no aluminum strip of suitable size (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.400Amp, 50 - 53KA | Rm | 14,118.00 |
| MAT-03008 | Supply, installation, testing and commissioning of ........Amp, ........KA breaking capacity (100% Neutral busbar) air insulated compact Raising mains/Bus Duct system made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 0.8 mm having degree of protection of IP 55 as per IEC/EN 61439-6, PVC/Plastic insulated reinforced with glass fibre four strip ALUMINIUM busbar in convenient sections including necessary end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. System etc., with necessary joints Fire barrier at each floor Provision of tapping at each floor/every meter, continuous earthing with 2 no aluminum strip of suitable size (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.630Amp, 50 - 63KA | Rm | 16,781.00 |
| MAT-03009 | Supply, installation, testing and commissioning of ........Amp, ........KA breaking capacity (100% Neutral busbar) air insulated compact Raising mains/Bus Duct system made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 0.8 mm having degree of protection of IP 55 as per IEC/EN 61439-6, PVC/Plastic insulated reinforced with glass fibre four strip ALUMINIUM busbar in convenient sections including necessary end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. System etc., with necessary joints Fire barrier at each floor Provision of tapping at each floor/every meter, continuous earthing with 2 no aluminum strip of suitable size (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.800 Amp, 50 - 76KA | Rm | 18,394.00 |
| MAT-03010 | Supply, installation, testing and commissioning of ........Amp, ........KA breaking capacity (100% Neutral busbar) air insulated compact Raising mains/Bus Duct system made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 0.8 mm having degree of protection of IP 55 as per IEC/EN 61439-6, PVC/Plastic insulated reinforced with glass fibre four strip ALUMINIUM busbar in convenient sections including necessary end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. System etc., with necessary joints Fire barrier at each floor Provision of tapping at each floor/every meter, continuous earthing with 2 no aluminum strip of suitable size (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.1000 Amp, 50 - 76KA | Rm | 21,137.00 |
| MAT-03011 | Supply, installation, testing and commissioning of ........Amp, ........KA breaking capacity (100% Neutral busbar) air insulated compact Raising mains/Bus Duct system made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 0.8 mm having degree of protection of IP 55 as per IEC/EN 61439-6, PVC/Plastic insulated reinforced with glass fibre four strip ALUMINIUM busbar in convenient sections including necessary end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. System etc., with necessary joints Fire barrier at each floor Provision of tapping at each floor/every meter, continuous earthing with 2 no aluminum strip of suitable size (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.1250 Amp, 50 - 76KA | Rm | 22,106.00 |
| MAT-03012 | Supply, installation, testing and commissioning of ........Amp, ........KA breaking capacity (100% Neutral busbar) air insulated compact Raising mains/Bus Duct system made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 0.8 mm having degree of protection of IP 55 as per IEC/EN 61439-6, PVC/Plastic insulated reinforced with glass fibre four strip ALUMINIUM busbar in convenient sections including necessary end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. System etc., with necessary joints Fire barrier at each floor Provision of tapping at each floor/every meter, continuous earthing with 2 no aluminum strip of suitable size (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.1600 Amp, 50 - 76KA | Rm | 27,754.00 |
| MAT-03014 | Supply and fixing of ……. Amps Horizontal / Vertical bends for Air Insulated Bus Duct. Makes: As per list of recommended brands.400 Amps | Nos | 16,136.00 |
| MAT-03015 | Supply and fixing of ……. Amps Horizontal / Vertical bends for Air Insulated Bus Duct. Makes: As per list of recommended brands.630 Amps | Nos | 18,394.00 |
| MAT-03016 | Supply and fixing of ……. Amps Horizontal / Vertical bends for Air Insulated Bus Duct. Makes: As per list of recommended brands.800 Amps | Nos | 19,201.00 |
| MAT-03017 | Supply and fixing of ……. Amps Horizontal / Vertical bends for Air Insulated Bus Duct. Makes: As per list of recommended brands.1000Amps | Nos | 22,509.00 |
| MAT-03018 | Supply and fixing of ……. Amps Horizontal / Vertical bends for Air Insulated Bus Duct. Makes: As per list of recommended brands.1250 Amps | Nos | 24,202.00 |
| MAT-03019 | Supply and fixing of ……. Amps Horizontal / Vertical bends for Air Insulated Bus Duct. Makes: As per list of recommended brands.1600 Amps | Nos | 27,431.00 |
| MAT-03020 | Supply and fixing of …...Amps Tap off box for Air Insulated Busduct. Makes: As per list of recommended brands.125A | Nos | 19,201.00 |
| MAT-03022 | Supply and fixing of …...Amps Tap off box for Air Insulated Busduct. Makes: As per list of recommended brands.400A | Nos | 32,915.00 |
| MAT-03023 | Supply and fixing of …...Amps Tap off box for Air Insulated Busduct. Makes: As per list of recommended brands.630 A | Nos | 35,819.00 |
| MAT-03024 | Supply, installation, testing and commissioning of .......Amp, ............KA breaking capacity (100% Neutral busbar) Aluminum sandwich busduct system, Class F, made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 1.5mm having degree of protection of IP 55/IP 65 as per IEC/EN 61439-6, Halogen free and Fire retardant in compliance with standard EN 60332-3, insulated and separated by from each other by double layer of polyester film Class F, self-extinguishing material, non- desiccant, with high dielectric strength in convenient sections including end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. system etc., with necessary joints, provision of tapping at each floor/every meter, continuous earthing with 50x6mm of 2 of aluminum strip (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.630Amp, 36/40 | Rm | 17,264.00 |
| MAT-03025 | Supply, installation, testing and commissioning of .......Amp, ............KA breaking capacity (100% Neutral busbar) Aluminum sandwich busduct system, Class F, made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 1.5mm having degree of protection of IP 55/IP 65 as per IEC/EN 61439-6, Halogen free and Fire retardant in compliance with standard EN 60332-3, insulated and separated by from each other by double layer of polyester film Class F, self-extinguishing material, non- desiccant, with high dielectric strength in convenient sections including end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. system etc., with necessary joints, provision of tapping at each floor/every meter, continuous earthing with 50x6mm of 2 of aluminum strip (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.800Amp, 42/50KA | Rm | 19,363.00 |
| MAT-03026 | Supply, installation, testing and commissioning of .......Amp, ............KA breaking capacity (100% Neutral busbar) Aluminum sandwich busduct system, Class F, made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 1.5mm having degree of protection of IP 55/IP 65 as per IEC/EN 61439-6, Halogen free and Fire retardant in compliance with standard EN 60332-3, insulated and separated by from each other by double layer of polyester film Class F, self-extinguishing material, non- desiccant, with high dielectric strength in convenient sections including end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. system etc., with necessary joints, provision of tapping at each floor/every meter, continuous earthing with 50x6mm of 2 of aluminum strip (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.1000Amp, 50KA | Rm | 21,298.00 |
| MAT-03027 | Supply, installation, testing and commissioning of .......Amp, ............KA breaking capacity (100% Neutral busbar) Aluminum sandwich busduct system, Class F, made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 1.5mm having degree of protection of IP 55/IP 65 as per IEC/EN 61439-6, Halogen free and Fire retardant in compliance with standard EN 60332-3, insulated and separated by from each other by double layer of polyester film Class F, self-extinguishing material, non- desiccant, with high dielectric strength in convenient sections including end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. system etc., with necessary joints, provision of tapping at each floor/every meter, continuous earthing with 50x6mm of 2 of aluminum strip (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.1250 Amp,75kA | Rm | 22,267.00 |
| MAT-03028 | Supply, installation, testing and commissioning of .......Amp, ............KA breaking capacity (100% Neutral busbar) Aluminum sandwich busduct system, Class F, made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 1.5mm having degree of protection of IP 55/IP 65 as per IEC/EN 61439-6, Halogen free and Fire retardant in compliance with standard EN 60332-3, insulated and separated by from each other by double layer of polyester film Class F, self-extinguishing material, non- desiccant, with high dielectric strength in convenient sections including end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. system etc., with necessary joints, provision of tapping at each floor/every meter, continuous earthing with 50x6mm of 2 of aluminum strip (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.1600 Amp,80 kA | Rm | 27,913.00 |
| MAT-03029 | Supply, installation, testing and commissioning of .......Amp, ............KA breaking capacity (100% Neutral busbar) Aluminum sandwich busduct system, Class F, made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 1.5mm having degree of protection of IP 55/IP 65 as per IEC/EN 61439-6, Halogen free and Fire retardant in compliance with standard EN 60332-3, insulated and separated by from each other by double layer of polyester film Class F, self-extinguishing material, non- desiccant, with high dielectric strength in convenient sections including end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. system etc., with necessary joints, provision of tapping at each floor/every meter, continuous earthing with 50x6mm of 2 of aluminum strip (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.2000 Amp ,80kA | Rm | 34,206.00 |
| MAT-03030 | Supply, installation, testing and commissioning of .......Amp, ............KA breaking capacity (100% Neutral busbar) Aluminum sandwich busduct system, Class F, made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 1.5mm having degree of protection of IP 55/IP 65 as per IEC/EN 61439-6, Halogen free and Fire retardant in compliance with standard EN 60332-3, insulated and separated by from each other by double layer of polyester film Class F, self-extinguishing material, non- desiccant, with high dielectric strength in convenient sections including end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. system etc., with necessary joints, provision of tapping at each floor/every meter, continuous earthing with 50x6mm of 2 of aluminum strip (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.2500 Amp ,150 kA | Rm | 49,051.00 |
| MAT-03031 | Supply, installation, testing and commissioning of .......Amp, ............KA breaking capacity (100% Neutral busbar) Aluminum sandwich busduct system, Class F, made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 1.5mm having degree of protection of IP 55/IP 65 as per IEC/EN 61439-6, Halogen free and Fire retardant in compliance with standard EN 60332-3, insulated and separated by from each other by double layer of polyester film Class F, self-extinguishing material, non- desiccant, with high dielectric strength in convenient sections including end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. system etc., with necessary joints, provision of tapping at each floor/every meter, continuous earthing with 50x6mm of 2 of aluminum strip (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.3200 Amp,160kA | Rm | 56,797.00 |
| MAT-03032 | Supply, installation, testing and commissioning of .......Amp, ............KA breaking capacity (100% Neutral busbar) Aluminum sandwich busduct system, Class F, made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 1.5mm having degree of protection of IP 55/IP 65 as per IEC/EN 61439-6, Halogen free and Fire retardant in compliance with standard EN 60332-3, insulated and separated by from each other by double layer of polyester film Class F, self-extinguishing material, non- desiccant, with high dielectric strength in convenient sections including end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. system etc., with necessary joints, provision of tapping at each floor/every meter, continuous earthing with 50x6mm of 2 of aluminum strip (one on each side0 including GI clamping brackets, angle iron brackets, steel fasteners, connecting to earth system as required . Makes: As per list of recommended brands.4000 Amp,160kA | Rm | 75,996.00 |
| MAT-03033 | Supply and fixing of ……. Amps Horizontal / Vertical bends for sandwich Bus Duct. Makes: As per list of recommended brands.630A | Nos | 17,588.00 |
| MAT-03034 | Supply and fixing of ……. Amps Horizontal / Vertical bends for sandwich Bus Duct. Makes: As per list of recommended brands.800A | Nos | 19,040.00 |
| MAT-03035 | Supply and fixing of ……. Amps Horizontal / Vertical bends for sandwich Bus Duct. Makes: As per list of recommended brands.1000A | Nos | 19,846.00 |
| MAT-03036 | Supply and fixing of ……. Amps Horizontal / Vertical bends for sandwich Bus Duct. Makes: As per list of recommended brands.1250 A | Nos | 21,461.00 |
| MAT-03037 | Supply and fixing of ……. Amps Horizontal / Vertical bends for sandwich Bus Duct. Makes: As per list of recommended brands.1600 A | Nos | 24,527.00 |
| MAT-03038 | Supply and fixing of ……. Amps Horizontal / Vertical bends for sandwich Bus Duct. Makes: As per list of recommended brands.2000 A | Nos | 28,559.00 |
| MAT-03039 | Supply and fixing of ……. Amps Horizontal / Vertical bends for sandwich Bus Duct. Makes: As per list of recommended brands.2500 A | Nos | 35,982.00 |
| MAT-03040 | Supply and fixing of ……. Amps Horizontal / Vertical bends for sandwich Bus Duct. Makes: As per list of recommended brands.3200 A | Nos | 43,727.00 |
| MAT-03041 | Supply and fixing of ……. Amps Horizontal / Vertical bends for sandwich Bus Duct. Makes: As per list of recommended brands.4000 A | Nos | 49,051.00 |
| MAT-03042 | Supply and fixing of ……. Amps Copper Flexibles for three phases and neutral for Air Insulated / sandwich Busduct. Makes: As per list of recommended brands.400A | Nos | 37,596.00 |
| MAT-03043 | Supply and fixing of ……. Amps Copper Flexibles for three phases and neutral for Air Insulated / sandwich Busduct. Makes: As per list of recommended brands.630A | Nos | 39,854.00 |
| MAT-03044 | Supply and fixing of ……. Amps Copper Flexibles for three phases and neutral for Air Insulated / sandwich Busduct. Makes: As per list of recommended brands.800A | Nos | 43,405.00 |
| MAT-03045 | Supply and fixing of ……. Amps Copper Flexibles for three phases and neutral for Air Insulated / sandwich Busduct. Makes: As per list of recommended brands.1000A | Nos | 45,662.00 |
| MAT-03047 | Supply and fixing of ……. Amps Copper Flexibles for three phases and neutral for Air Insulated / sandwich Busduct. Makes: As per list of recommended brands.1600 A | Nos | 52,116.00 |
| MAT-03048 | Supply and fixing of ……. Amps Copper Flexibles for three phases and neutral for Air Insulated / sandwich Busduct. Makes: As per list of recommended brands.2000 A | Nos | 56,797.00 |
| MAT-03049 | Supply and fixing of ……. Amps Copper Flexibles for three phases and neutral for Air Insulated / sandwich Busduct. Makes: As per list of recommended brands.2500 A | Nos | 64,540.00 |
| MAT-03050 | Supply and fixing of ……. Amps Copper Flexibles for three phases and neutral for Air Insulated / sandwich Busduct. Makes: As per list of recommended brands.3200 A | Nos | 69,058.00 |
| MAT-03051 | Supply and fixing of ……. Amps Copper Flexibles for three phases and neutral for Air Insulated / sandwich Busduct. Makes: As per list of recommended brands.4000 A | Nos | 73,738.00 |
| MAT-03052 | Supply and fixing of Flange end for ………. Amps for Air insulated Bus ducts. Makes: As per list of recommended brands.400A | Nos | 14,521.00 |
| MAT-03053 | Supply and fixing of Flange end for ………. Amps for Air insulated Bus ducts. Makes: As per list of recommended brands.630A | Nos | 19,846.00 |
| MAT-03054 | Supply and fixing of Flange end for ………. Amps for Air insulated Bus ducts. Makes: As per list of recommended brands.800A | Nos | 24,527.00 |
| MAT-03055 | Supply and fixing of Flange end for ………. Amps for sandwich bus ducts Makes: As per list of recommended brands.400A | Nos | 17,588.00 |
| MAT-03056 | Supply and fixing of Flange end for ………. Amps for sandwich bus ducts Makes: As per list of recommended brands.630A | Nos | 25,172.00 |
| MAT-03057 | Supply and fixing of Flange end for ………. Amps for sandwich bus ducts Makes: As per list of recommended brands.800A | Nos | 29,205.00 |
| MAT-03058 | Supply and fixing of Flange end for ………. Amps for sandwich bus ducts Makes: As per list of recommended brands.1000 A | Nos | 30,819.00 |
| MAT-03059 | Supply and fixing of Flange end for ………. Amps for sandwich bus ducts Makes: As per list of recommended brands.1250 A | Nos | 33,657.00 |
| MAT-03060 | Supply and fixing of Flange end for ………. Amps for sandwich bus ducts Makes: As per list of recommended brands.1600 A | Nos | 35,277.00 |
| MAT-03062 | Supply and fixing of Flange end for ………. Amps for sandwich bus ducts Makes: As per list of recommended brands.2500 A | Nos | 63,411.00 |
| MAT-03063 | Supply and fixing of Flange end for ………. Amps for sandwich bus ducts Makes: As per list of recommended brands.3200 A | Nos | 69,382.00 |
| MAT-03064 | Supply and fixing of Flange end for ………. Amps for sandwich bus ducts Makes: As per list of recommended brands.4000 A | Nos | 72,931.00 |
| MAT-03065 | Supply and fixing of …...Amps Tap off box for Sandwich Busduct. Makes: As per list of recommended brands.160A | Nos | 24,202.00 |
| MAT-03066 | Supply and fixing of …...Amps Tap off box for Sandwich Busduct. Makes: As per list of recommended brands.250A | Nos | 40,661.00 |
| MAT-03067 | Supply and fixing of …...Amps Tap off box for Sandwich Busduct. Makes: As per list of recommended brands.400A | Nos | 51,471.00 |
| MAT-03068 | Supply and fixing of …...Amps Tap off box for Sandwich Busduct. Makes: As per list of recommended brands.630A | Nos | 74,705.00 |
| MAT-03069 | Supply and fixing of …...Amps Tap off box for Sandwich Busduct. Makes: As per list of recommended brands.800A | Nos | 1,12,140.00 |
| ELEC-2.9.6 | Supply and Fixing of Spring Bracket with fixing kit for Air Insulated Busduct / Raising Mains. Makes: As per list of recommended brands | Nos | 8,390.00 |
S-02/SOURCE RECORD2026-27
- ISSUED BY
- Board of Chief Engineers, Government of Andhra Pradesh
- EFFECTIVE
- 2026-06-01Parts I, II and IV of the 2026-27 schedule — Water Resources, Roads & Bridges, and Public Health — are not reproduced here. See the official source for those.
- RETRIEVED
- 2026-07-29
S-03/CHAPTERS88 MORE
Other chapters in this schedule
- Bricks & Building Blocks21
- Natural Flooring Stones23
- Wall & Floor Tiles40
- Paving & Interlocking Tiles25
- Timber & Roofing Materials23
- Steel Materials26
- Fixtures for Doors & Windows103
- Construction Chemicals & Admixtures89
- Glass Materials21
- Paints & Polishes42
- Particle Boards110
- Plywoods, Laminates & Veneers31
SHOW ALL 88 CHAPTERS
- Ceilings, Wall Partitions & Wall Linings103
- Doors, Shutters & Frames113
- Windows99
- Structural Glazing & Curtain Walling6
- Dismantling13
- Expansion Joint Fillers11
- Miscellaneous Items305
- Expansion Joints6
- Energy Efficient Items33
- S.W.G. Pipes & Fittings62
- Man Holes & Inspection Chambers as per IS 4111 : Part 1 : 19866
- C.I. Pipes & Fittings as per IS 1729:197941
- Vitreous Chinaware Sanitary Appliances as per IS:2556 – 197439
- Taps & Faucets6
- G.I. Pipes & Fittings15
- PVC Pipes & Fittings26
- M.S. Conduit Pipes51
- PVC Conduits36
- Hot Dip Galvanized Metal Boxes for Switch Boards9
- T.W. Boards25
- Copper Flexible Cables (as per IS:694)66
- Service Mains and Flat Cable for Submersible Motors16
- Flush Type Switches and Accessories27
- Modular Switches and Accessories49
- Panel Mounting Switch Disconnector Fuse Units (sdfu)10
- On Load Changeover Switches (open Execution)10
- Auto Transfer Switch14
- Rewirable / Double Break Switches in SS Enclosure12
- Hrc Fuse Links (DIN/BOLTED Type)6
- Porcelain Rewirable Fuse Units6
- MCBs (as per IS:60898-1:2002)23
- Isolators Confirms to I E C 60947 PART-III22
- RCCBs (ELCB/RCD) Confirms to IEC:61008 and IS:12640-122
- MCB Distribution Boards (as per IS 8623; IS 13032; Iec 61439-3)44
- Automatic Street Light Control Systems12
- Flourscent Tubes / CFL Lamps / LED Bulbs5
- LED Luminaires Indoor74
- U.G. Cables135
- Cable Trays19
- Double Walled Corrugated HDPE Pipe8
- Fans18
- Water Heaters (conventional & Solar)14
- Accessories for Water Heaters11
- Pumpsets96
- Air Conditioners15
- HVAC SYSTEMS(VRV/VRF)70
- Stabilizers10
- Repairing of Fans, Coolers, Pumps, Motors, Fridges and Airconditioners76
- Swaged / Octagonal Poles and Garden Posts49
- LT Panel and Accessories33
- Sub Station Equipment and Transformers18
- Maintenance and Repairs of Transformers21
- Overhead Lines& Line Materials27
- Lightening Protective System16
- Earthing19
- Local Area Network59
- Raceways and Junction Boxes9
- Computers, Printers and Scanners16
- Small System7
- Large EPABX System16
- C.C.TV & Surveillance System16
- Public Address Systems15
- AUDIO-VIDEO Systems32
- Legend Plates8
- Copper / Aluminium / G.I. Items (per Kg)6
- SMC Type Supports for the Busbars36
- Addressable - Fire Alarm System27
- Conventional - Fire Alarm System14
- Powder Based Fire Extinguishers18
- Fire Hydrant and Sprinkler System58
- Generators Specification7
- Inverters and Online UPS Systems34
- Temporary Illumination57
- Lifts (new Installation)9
- Medical Gas Pipeline System10
- Building Management Systems21
ARCHED / ESTIMATING
Pricing panel mounting mccbs against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index and catching where rates have moved since the base edition takes time and is easy to get wrong. We can do it for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.