Skip to main content
R/ANDHRA PRADESH SOR 2026-27

Structural Glazing & Curtain Walling rates

6 structural glazing & curtain walling items from the Board of Chief Engineers, Government of Andhra Pradesh, effective 2026-06-01.
Items
6
Lowest rate
₹5,179.00
Highest rate
₹7,978.00
Effective from
2026-06-01
S-01/RATE ITEMS6 ITEMS

Structural Glazing & Curtain Walling rates in the Andhra Pradesh Common Schedule of Rates — Part-III (Buildings, Water Supply & Electrical) 2026-27 run from ₹5,179.00 to ₹7,978.00. Transcribed from Government of Andhra Pradesh — Common Schedule of Rates 2026-27, Part-III (Buildings), Board of Chief Engineers. For reference only: verify against the official source before pricing a bid.

Download the full schedule (Excel)All 97 chapters

6 items. Scroll the table to browse

DescriptionUnit
BMT-Q.01Providing and fixing Structural Glazing fabricated from Roll formed sections made of Prepainted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72 mm and the glass holding section made of 304 grade stainless steel of 0.58 mm thick galvanised steel section as stiffeners inside the colour coated steel powder coated sections as per the design requirement & calculations to suit wind pressures as given in IS: 875, the primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick and the vertical section of 50 mm x 99 mm x 0.72 mm, 33 mm x 56 mm x 0.72 mm for frame horizontal section, stiffener section of 47 mm x 97 mm x 1 mm, cover profiles sections of 20 mm x 58 mm x 0.58 mm, glass holding section of 37 mm x 37 mm & 37 mm x 18 mm including fixing 5mm thick Ocean Blue reflective glass, brackets made of CRCA powder coated/Electroplated to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement and gasket made of Ethyl Propylene Diamine Monomer, U.V. resistant silicon sealant including fixing in concrete/masonry wall with self expanding cap & screws inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and fixing charges complete for finished item of workSqm7,978.00
BMT-Q.02Providing and fixing Top Hung shutters in Structural Glazing fabricated from Roll formed sections made of Pre painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72 mm and the glass holding section made of 304 grade stainless steel of 0.58 mm thick, duly providing stiffeners inside the colour coated steel/powder coated sections as per the design requirement, calculations to suit wind pressures as given in IS 875 and primer coat with epoxy primer of 5-7 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick and the outer frame of 20 mm x 58 mm x 0.58 mm, shutter sections of 57 mm x 33 mm x 0.72 mm, stiffener sections of 55 mm x 31 mm x 1mm, hinges – 2 Nos for each shutter and aluminium Stays – 2 Nos. for each shutter, aluminium Handle – 1 no. for each shutter including cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and fixing charges etc for finished item of workSqm6,374.00
BMT-Q.03Supplying and fixing of curtain Glazing made of pre painted steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12 16 microns thick and back coated with 5-7 microns thick alkyd backer using the section for outer frame of 46 x 52 mm, section for mullion of 46 x 70 mm and section for beading of 18 x 25 mm and the glazing with 5 mm thick plain float glass fitted with Ethyl Propylene diameine Monomer (EPDM) gaskets and the sections cut to length, mitre joined with corner bracket, centre mullions fixed suing mullion cap inluding handle made of high grade Aluminium powder coated and nylon receiver, corner brackets made of CRCA with zinc phosphating, mullion caps made of Glass filled nylon including fixing theSqm6,620.00
BMT-Q.04Mullion section size of 46 x 70mm Beading section size of 18 x 25 mm Fixed Glazing 2'0" x 3'0" (609.6x914.4mm) grid outer frame section size of 46 x 52 mmSqm6,374.00
BMT-Q.05Mullion section size of 46 x 70mm Beading section size of 18 x 25 mm Fixed Glazing 3'0" x 3'0" (914.4x914.4mm) grid outer frame section size of 46 x 52 mmSqm5,179.00
BMT-Q.06Mullion section size of 46 x 70mm Beading section size of 18 x 25 mm Fixed Glazing 3'0" x 4'0" (914.4x1219.2mm) grid outer frame section size of 46 x 52 mmSqm5,179.00
S-02/SOURCE RECORD2026-27
ISSUED BY
Board of Chief Engineers, Government of Andhra Pradesh
EFFECTIVE
2026-06-01Parts I, II and IV of the 2026-27 schedule — Water Resources, Roads & Bridges, and Public Health — are not reproduced here. See the official source for those.
RETRIEVED
2026-07-29
S-03/CHAPTERS88 MORE

Other chapters in this schedule

SHOW ALL 88 CHAPTERS
ARCHED / ESTIMATING

Pricing structural glazing & curtain walling against a live tender

Mapping a tender BOQ to the right schedule items, applying the current cost index and catching where rates have moved since the base edition takes time and is easy to get wrong. We can do it for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.