R/ANDHRA PRADESH SOR 2026-27
Overhead Lines& Line Materials rates
27 overhead lines& line materials items from the Board of Chief Engineers, Government of Andhra Pradesh, effective 2026-06-01.
- Items
- 27
- Lowest rate
- ₹97.00
- Highest rate
- ₹1,02,248.00
- Effective from
- 2026-06-01
S-01/RATE ITEMS27 ITEMS
Overhead Lines& Line Materials rates in the Andhra Pradesh Common Schedule of Rates — Part-III (Buildings, Water Supply & Electrical) 2026-27 run from ₹97.00 to ₹1,02,248.00. Transcribed from Government of Andhra Pradesh — Common Schedule of Rates 2026-27, Part-III (Buildings), Board of Chief Engineers. For reference only: verify against the official source before pricing a bid.
/
Unit
27 items. Scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| MAT-04090 | Supply and transportation of ………….PSCC Poles8.0 Mtr , Working load-140 Kgs | Nos | 2,415.00 |
| MAT-04091 | Supply and transportation of ………….PSCC Poles8.0 Mtr , Working load-200 Kgs | Nos | 3,450.00 |
| MAT-04092 | Supply and transportation of ………….PSCC Poles9.1 Mtr , Working load-280 Kgs | Nos | 4,910.00 |
| MAT-04093 | Supply and transportation of 9 mtr length ………….RS Joist Poles150 x 75 mm (Wt of the pole-140 Kgs) | Nos | 10,500.00 |
| MAT-04094 | Supply and transportation of 9 mtr length ………….RS Joist Poles175 x 85 mm (Wt of the pole-215Kgs) | Nos | 16,125.00 |
| MAT-04095 | Supply and transportation of 9 mtr length ………….RS Joist Poles150 x 150 mm (Wt of the pole-333 Kgs) | Nos | 24,975.00 |
| MAT-04096 | Supply and erection of GI stay set of dia……... including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete20mm,2.4 mtr long stay rod and anchor plate 380mmx380mmx6.4mm | Set | 2,245.00 |
| MAT-04097 | Supply and erection of GI stay set of dia……... including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm | Set | 1,699.00 |
| MAT-04098 | Supply and fixing of 11KV -V- cross arms with ……………...duly welded with necessary clamping arrangements etc., complete75x40 mm MS channel including 4 nos 50 x 50 x6 mm packing plates (9 Kgs) | Nos | 1,494.00 |
| MAT-04099 | Supply and fixing of 11KV -V- cross arms with ……………...duly welded with necessary clamping arrangements etc., complete65 x65 x6 MS angle (8.2 Kgs) | Nos | 1,058.00 |
| MAT-04100 | Supply and fixing of LT 3 phase 4 wire cross arm of length 3' 8" with……. and necessary clamping arrangements, cutting, drilling and welding etc., complete50 x 50 x6 mm MS angle ( wt 5.75 Kgs) | Nos | 517.00 |
| MAT-04101 | Supply and fixing of LT 3 phase 4 wire cross arm of length 3' 8" with……. and necessary clamping arrangements, cutting, drilling and welding etc., complete65 x65 x6 MS angle (wt 7 Kgs) | Nos | 610.00 |
| MAT-04102 | Supply and fixing of LT 3 phase 5 wire cross arm of length 4' 5" with……. and necessary clamping arrangements, cutting, drilling and welding etc., complete50 x 50 x6 mm MS angle ( wt 7.30Kgs) | Nos | 667.00 |
| MAT-04103 | Supply and fixing of LT 3 phase 5 wire cross arm of length 4' 5" with……. and necessary clamping arrangements, cutting, drilling and welding etc., complete65 x65 x6 MS angle (wt 9.60 Kgs) | Nos | 841.00 |
| MAT-04106 | Supply and fixing of ……... LT porcelain pin insulator as per IS 1447- 1997 suitable for working voltage 1100 V including all accessories like Hot dip GI spindle and nuts etc.,100 x 65 mm | Each | 97.00 |
| MAT-04107 | Supply and fixing of ……... LT porcelain pin insulator as per IS 1447- 1997 suitable for working voltage 1100 V including all accessories like Hot dip GI spindle and nuts etc.,100 x 85 mm | Each | 109.00 |
| MAT-04108 | Supply and fixing of ……... LT porcelain shackle insulator as per IS 1443-1979 suitable for working voltage 1100 V including all accessories like Hot dip GI spindle and nuts etc.,75 x 90 mm | Each | 169.00 |
| MAT-04109 | Supply and fixing of ……... LT porcelain shackle insulator as per IS 1443-1979 suitable for working voltage 1100 V including all accessories like Hot dip GI spindle and nuts etc.,100 x 110 mm | Each | 206.00 |
| MAT-04114 | Supply and Transportation of Over Head …………. Conductor as per IS 398 (PART - II): 1996100 Sq mm AAA | KM | 1,02,248.00 |
| MAT-04115 | Supply and Transportation of Over Head …………. Conductor as per IS 398 (PART - II): 199655 Sq mm AAA | KM | 67,000.00 |
| MAT-04116 | Supply and Transportation of Over Head …………. Conductor as per IS 398 (PART - II): 199634 Sq mm AAA | KM | 36,000.00 |
| ELEC-6.5.11 | Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure | Each | 3,025.00 |
| ELEC-6.5.12 | Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete | Each | 6,655.00 |
| ELEC-6.5.13 | Supply and fixing of 11 KV danger plates on the existing poles | Each | 121.00 |
| ELEC-6.5.14 | Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., | Each | 21,780.00 |
| ELEC-6.5.20 | Providing transformer plinth 1.2 x 1.2 x 1.5 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top and 225mm thick wall constructed in stone masonry and remaking hallow portion shall be filled with stone chips duly plastered 20mm thick outsides including watering etc., complete | Nos | 12,100.00 |
| ELEC-6.5.21 | Providing CTPT plinth 600mm x 600mm x 2.1 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top duly plastered 20mm thick outsides including watering etc., complete | Nos | 7,260.00 |
S-02/SOURCE RECORD2026-27
- ISSUED BY
- Board of Chief Engineers, Government of Andhra Pradesh
- EFFECTIVE
- 2026-06-01Parts I, II and IV of the 2026-27 schedule — Water Resources, Roads & Bridges, and Public Health — are not reproduced here. See the official source for those.
- RETRIEVED
- 2026-07-29
S-03/CHAPTERS88 MORE
Other chapters in this schedule
- Bricks & Building Blocks21
- Natural Flooring Stones23
- Wall & Floor Tiles40
- Paving & Interlocking Tiles25
- Timber & Roofing Materials23
- Steel Materials26
- Fixtures for Doors & Windows103
- Construction Chemicals & Admixtures89
- Glass Materials21
- Paints & Polishes42
- Particle Boards110
- Plywoods, Laminates & Veneers31
SHOW ALL 88 CHAPTERS
- Ceilings, Wall Partitions & Wall Linings103
- Doors, Shutters & Frames113
- Windows99
- Structural Glazing & Curtain Walling6
- Dismantling13
- Expansion Joint Fillers11
- Miscellaneous Items305
- Expansion Joints6
- Energy Efficient Items33
- S.W.G. Pipes & Fittings62
- Man Holes & Inspection Chambers as per IS 4111 : Part 1 : 19866
- C.I. Pipes & Fittings as per IS 1729:197941
- Vitreous Chinaware Sanitary Appliances as per IS:2556 – 197439
- Taps & Faucets6
- G.I. Pipes & Fittings15
- PVC Pipes & Fittings26
- M.S. Conduit Pipes51
- PVC Conduits36
- Hot Dip Galvanized Metal Boxes for Switch Boards9
- T.W. Boards25
- Copper Flexible Cables (as per IS:694)66
- Service Mains and Flat Cable for Submersible Motors16
- Flush Type Switches and Accessories27
- Modular Switches and Accessories49
- Panel Mounting Switch Disconnector Fuse Units (sdfu)10
- On Load Changeover Switches (open Execution)10
- Auto Transfer Switch14
- Rewirable / Double Break Switches in SS Enclosure12
- Hrc Fuse Links (DIN/BOLTED Type)6
- Porcelain Rewirable Fuse Units6
- Panel Mounting MCCBs113
- MCBs (as per IS:60898-1:2002)23
- Isolators Confirms to I E C 60947 PART-III22
- RCCBs (ELCB/RCD) Confirms to IEC:61008 and IS:12640-122
- MCB Distribution Boards (as per IS 8623; IS 13032; Iec 61439-3)44
- Automatic Street Light Control Systems12
- Flourscent Tubes / CFL Lamps / LED Bulbs5
- LED Luminaires Indoor74
- U.G. Cables135
- Cable Trays19
- Double Walled Corrugated HDPE Pipe8
- Fans18
- Water Heaters (conventional & Solar)14
- Accessories for Water Heaters11
- Pumpsets96
- Air Conditioners15
- HVAC SYSTEMS(VRV/VRF)70
- Stabilizers10
- Repairing of Fans, Coolers, Pumps, Motors, Fridges and Airconditioners76
- Swaged / Octagonal Poles and Garden Posts49
- LT Panel and Accessories33
- Sub Station Equipment and Transformers18
- Maintenance and Repairs of Transformers21
- Lightening Protective System16
- Earthing19
- Local Area Network59
- Raceways and Junction Boxes9
- Computers, Printers and Scanners16
- Small System7
- Large EPABX System16
- C.C.TV & Surveillance System16
- Public Address Systems15
- AUDIO-VIDEO Systems32
- Legend Plates8
- Copper / Aluminium / G.I. Items (per Kg)6
- SMC Type Supports for the Busbars36
- Addressable - Fire Alarm System27
- Conventional - Fire Alarm System14
- Powder Based Fire Extinguishers18
- Fire Hydrant and Sprinkler System58
- Generators Specification7
- Inverters and Online UPS Systems34
- Temporary Illumination57
- Lifts (new Installation)9
- Medical Gas Pipeline System10
- Building Management Systems21
ARCHED / ESTIMATING
Pricing overhead lines& line materials against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index and catching where rates have moved since the base edition takes time and is easy to get wrong. We can do it for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.