Skip to main content
R/MAHARASHTRA SOR 2022-23

Block masonary rates

5 block masonary items from the Maharashtra Public Works Department (PWD), effective 2022-07-25.
Items
5
Lowest rate
₹1,325.00
Highest rate
₹2,840.00
Effective from
2022-07-25
S-01/RATE ITEMS5 ITEMS

Block masonary rates in the Maharashtra State Schedule of Rates 2022-23 run from ₹1,325.00 to ₹2,840.00. Transcribed from Maharashtra PWD — State Schedule of Rates 2022-23, effective 25 July 2022. For reference only: verify against the official source before pricing a bid.

Download the full schedule (Excel)All 81 chapters

5 items. Scroll the table to browse

DescriptionUnit
50.23Providing and constructing non load bearing wall with 200 mm Horizontally perforated THERMO clay hollow blocks with compressive strength not less than 35Kilogram/Sqcm, U value of 0.60 W/m2K, Water Absorption of 15% mansonry to be done using sand cement mortar 1:6 with blocks of size 400mm x 200 mm x 200 mm (12.5 brick per One Square Metre. excluding mortar joint thickness) including cost of material, labour charges, scaffolding, curing at all height, complete as per specification & directions of Engineer in charge. Cost shall be inclusive of filling the blocks with cement mortar at exposed junctions and filling with concrete using 12mm down size aggregates at Window and door Jambs for fixing hold fast.anchors etc. It must be green building certified from IGBC and Griha and Should comply IS code 3952 with prior approval of concerned Superitending Engineer.Sqm2,840.00
50.24Providing and constructing non load bearing wall with 150 mm Horizontally perforated THERMO clay hollow blocks with compressive strength not less than 35Kilogram/Sqcm, U value of 0.60 W/m2K, Water Absorption of 15% mansonry to be done using sand cement mortar 1:6 with blocks of size 400mm x 150 mm x 200 mm (12.5 brick per One Square Metre. excluding mortar joint thickness) including cost of material, labour charges, scaffolding, curing at all height, complete as per specification & directions of Engineer in charge. Cost shall be inclusive of filling the blocks with cement mortar at exposed junctions and filling with concrete using 12mm down size aggregates at Window and door Jambs for fixing hold fast.anchors etc. It must be green building certified from IGBC and Griha and Should comply IS code 3952 with prior approval of concerned Superitending Engineer.Sqm2,750.00
50.26Providing and constructing non load bearing wall with 200 mm Grinded Horizontally perforated clay hollow blocks with compressive strength not less than 35Kilogram/Sqcm, U value of 1.00 W/m2K, Water Absorption of 15% tolerance on Grinded brick height is +/- 1.00 mm, masonry to be done using POROTHERM Dry Flx. Systeam with 20 mm thick S shape application (Application method need to be followed as per Wienerberger methodology) blocks of size 400mm x 200 mm x 200 mm (12.5 brick per One Square Metre.) including cost of material, labour charges, scaffolding, curing at all height, complete as per specification & directions of Engineer in charge. Cost shall be inclusive of end bricks to be used at window and door jambs for fixing hold fast. anchors etc.,plastering is to be done as per requirement .and is to be considered seperatly with prior approval of concerned Superitending Engineer.Sqm1,822.00
50.27Providing and constructing non load bearing wall with 150 mm Grinded Horizontally perforated clay hollow blocks with compressive strength not less than 35Kilogram/Sqcm, U value of 1.2 W/m2K, Water Absorption of 15% tolerance on Grinded brick height is+/- 1.00 mm, masonry to be done using Dry Flx. Systeam with 20 mm thick S shape application (Application method need to be followed as per Wienerberger methodology) blocks of size 400mm x 150 mm x 200 mm (12.5 brick per One Square Metre.) including cost of material, labour charges, scaffolding, curing at all height, complete as per specification & directions of Engineer in charge. Cost shall be inclusive of end bricks to be used at window and door jambs for fixing hold fast. anchors etc.,plastering is to be done as per requirement and is to be considered seperatlySqm1,650.00
50.28Providing and constructing non load bearing wall with 100 mm Grinded Horizontally perforated clay hollow blocks with compressive strength not less than 35Kilogram/Sqcm, U value of 1.7 W/m2K, Water Absorption of 15% tolerance on Grinded brick height is +/- 1.00 mm, masonry to be done using Dry Flx. Systeam with 20 mm thick S shape application (Application method need to be followed as per Wienerberger methodology) blocks of size 400mm x 100 mm x 200 mm (12.5 brick per One Square Metre.) including cost of material, labour charges, scaffolding, curing at all height, RCC. stiffener band necessary at every 1.0 meter height of the wall, complete as per specification & directions of Engineer in charge. Cost shall be inclusive of end bricks to be used at window and door jambs for fixing hold fast. anchors etc.,,plastering is to be done as per requirement ,and is to be considered seperatly with prior approval of concerned Superitending Engineer.Sqm1,325.00
S-02/SOURCE RECORD2022-23
ISSUED BY
Maharashtra Public Works Department (PWD)
EFFECTIVE
2022-07-25
RETRIEVED
2026-07-29
S-03/CHAPTERS59 MORE

Other chapters in this schedule

SHOW ALL 59 CHAPTERS
ARCHED / ESTIMATING

Pricing block masonary against a live tender

Mapping a tender BOQ to the right schedule items, applying the current cost index and catching where rates have moved since the base edition takes time and is easy to get wrong. We can do it for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.