Skip to main content

Ladakh SOR 2024

Wood and PVC Work rates

342 wood and pvc work items from the Ladakh Public Works (R&B), effective 2024-08-01.

Wood and PVC Work rates in the Ladakh Ladakh Schedule of Rates 2024 run from ₹21.81 to ₹2,12,881.28. Transcribed from UT of Ladakh, Public Works (R&B) Department — Ladakh Schedule of Rates (LSoR) 2024, Order No.58-LA-PW(R&B) of 2024 dated 24.07.2024, operative from 1 August 2024. Reference only — verify against the official source before pricing a bid.

Download the full schedule (Excel)All 29 chapters

342 items — scroll the table to browse

DescriptionUnit
9.1.1Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)Second class teak woodCum2,12,881.28
9.1.2Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)Sal woodCum1,67,849.14
9.1.3Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)Kiln seasoned and chemically treated hollock woodCum94,360.54
9.1.4Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)First class Kail woodCum1,39,072.60
9.1.5Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)Second class Kail woodCum1,20,151.54
9.2Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001 (Part B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)Cum1,34,107.21
9.2AProviding hoisting and fixing trusses/purlins/rafters/posts/post plates or like components of 1st class budloo/fir wood including cost of screws etc completeCum2,09,060.42
9.3.1Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etcSal woodCum1,53,292.36
9.3.2Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etcKiln seasoned and chemically treated hollock woodCum79,626.87
9.3.3Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etcBudloo/Fir woodCum77,119.55
9.4.1Extra for additional labour for circular works, such as in frames of fan lightSecond class teak woodCum21,288.13
9.4.2Extra for additional labour for circular works, such as in frames of fan lightSal woodCum16,784.91
9.4.3Extra for additional labour for circular works, such as in frames of fan lightKiln seasoned and chemically treated hollock woodCum9,436.38
9.5.1.1Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) — Second class teak wood35 mm thick shuttersSqm5,770.78
9.5.1.2Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) — Second class teak wood30 mm thick shuttersSqm5,183.19
9.5.2.1Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) — Kiln seasoned and chemically treated hollock wood35 mm thick shuttersSqm3,095.16
9.5.2.2Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) — Kiln seasoned and chemically treated hollock wood30 mm thick shuttersSqm2,877.07
9.5.3.1Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) — Kiln seasoned selected planks of sheesham wood35 mm thick shuttersSqm5,317.52
9.5.3.2Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) — Kiln seasoned selected planks of sheesham wood30 mm thick shuttersSqm4,792.14
9.5.4.1Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) — First class kail wood35 mm thick shuttersSqm3,302.92
9.5.5.1Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) — Second class kail wood35 mm thick shuttersSqm3,573.69
9.6.1Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part B) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of: (Note:- Butt hinges and necessary screws shall be paid separately)12 mm thick plain grade -1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT- I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848Sqm3,272.05
9.6.2Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part B) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of: (Note:- Butt hinges and necessary screws shall be paid separately)12 mm thick pre-laminated particle board (decorative lamination on both sides) grade -1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPT- I, conforming to IS: 3087, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade 1, Type - II markedSqm3,339.34
9.6.3Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part B) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of: (Note:- Butt hinges and necessary screws shall be paid separately)12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade -1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS: 3087 bonded with BWP type synthetic resin adhesive as per IS: 848 and pre- laminated conforming to IS: 12823, Grade -1, Type II markedSqm3,631.98
9.7.1Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thickSecond class teak woodSqm4,667.23
9.7.2Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thickKiln seasoned and chemically treated hollock woodSqm2,491.86
9.7.2.1Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thickFirst class Kail woodSqm2,624.32
9.7.2.2Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thickSecond class Kail woodSqm2,848.47
9.7.3.1Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick — Ply wood 5 ply, 9 mm thickDecorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR typeSqm3,043.08
9.7.3.2Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick — Ply wood 5 ply, 9 mm thickDecorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR TypeSqm3,001.70
9.7.4.1Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick — Ply wood 7 ply, 9 mm thickDecorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR TypeSqm3,186.21
9.7.5.1Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick — Particle Board 12 mm thickPlain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 markedSqm1,658.38
9.7.5.2Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick — Particle Board 12 mm thickVeneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS:3097, grade ISqm2,272.27
9.7.5.3Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick — Particle Board 12 mm thickPre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 markedSqm2,082.59
9.7.5.4Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick — Particle Board 12 mm thickPre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 markedSqm2,063.62
9.7.6.1Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick — Coir Veneer Board (conforming to IS 14842)12 mm thickSqm2,319.70
9.7.7.1Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick — Float glass panes4 mm thick glass pane (weight not less than 10kg/sqm)Sqm2,879.65
9.7.7.2Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick — Float glass panes5.0 mm thick glass panes (weight not less than 12.50 kg/sqm)Sqm3,174.52
9.7.8Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thickFly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beadingSqm1,864.73
9.9.1.1Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws — Second class teak wood35 mm thickSqm10,565.32
9.9.1.2Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws — Second class teak wood30 mm thickSqm6,446.75
9.9.2.1Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws — Kiln seasoned and chemically treated hollock wood35 mm thickSqm4,073.15
9.9.2.2Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws — Kiln seasoned and chemically treated hollock wood30 mm thickSqm3,785.28
9.9.3.1Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws — Kiln seasoned selected planks of sheesham wood35 mm thickSqm6,602.80
9.9.3.2Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws — Kiln seasoned selected planks of sheesham wood30 mm thickSqm6,002.37
9.10.1Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B), using 4 mm thick float glass panes for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, all as per directions of Engineer-in-charge (Note:- Butt hinges and necessary screws shall be paid separately)30 mm thick shuttersSqm2,796.32
9.11.1Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)5.0 mm thick instead of 4 mm thickSqm243.27
9.12Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)Sqm471.18
9.13Deduct for providing pin headed glass panes instead of ordinary float glass panes weighing 4 mm thick in doors, windows and clerestory windows shutters (Area of opening for glass panes excluding portion inside rebate shall be measured)Sqm38.41
9.14Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured)Sqm152.42
9.15.1.1Deduct for not providing hinges in doors, windows or clerestory window shutters with — Stainless steel butt hinges with stainless steel screwsFor 2nd class teak wood and other class of wood shuttersSqm236.91
9.15.2.1Deduct for not providing hinges in doors, windows or clerestory window shutters with — ISI marked M.S. pressed butt hinges bright finished of required sizeFor 2nd class teak wood and other class of wood shuttersSqm84.49
9.16.1.1Providing and fixing 25 mm thick shutters for cup board etc — Panelled or panelled & glazed shuttersSecond class teak wood including ISI marked anodised aluminium butt hinges with necessary screwsSqm5,892.73
9.16.1.2Providing and fixing 25 mm thick shutters for cup board etc — Panelled or panelled & glazed shuttersSecond class teak wood including iSi marked nickel plated bright finished M.S. piano hinges with necessary screwsSqm5,035.12
9.16.2.1Providing and fixing 25 mm thick shutters for cup board etc — Glazed shuttersSecond class teak wood including ISI marked anodized aluminium butt hinges with necessary screwsSqm5,900.49
9.16.2.2Providing and fixing 25 mm thick shutters for cup board etc — Glazed shuttersSecond class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screwsSqm5,952.97
9.17.1Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS: 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)12 mm thickSqm753.10
9.17.2Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS: 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)18 mm thickSqm1,150.34
9.18.1Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS: 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately)18 mm thickSqm1,283.30
9.18.2Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS: 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately)25 mm thickSqm1,765.74
9.21.1Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters35 mm thick including ISI marked Stainless Steel butt hinges with necessary screwsSqm2,798.40
9.21.2Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters30 mm thick including ISI marked Stainless Steel butt hinges with necessary screwsSqm2,717.31
9.21.3Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screwsSqm2,610.29
9.22.1Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)On one side onlySqm594.66
9.23Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured)Sqm507.88
9.24.1Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured)Rectangular or squareSqm246.12
9.24.2Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured)CircularSqm246.12
9.25.1Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured)Decorative type doorSqm492.23
9.26Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured)Sqm136.57
9.27.1.1.1Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws — 35 mm thick shutters — with ISI marked M.S. pressed butt hinges bright finished of required sizeSecond class teak woodSqm6,438.80
9.27.1.1.2Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws — 35 mm thick shutters — with ISI marked M.S. pressed butt hinges bright finished of required sizeKiln seasoned and chemically treated hollock woodSqm3,741.82
9.27.1.1.3Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws — 35 mm thick shutters — with ISI marked M.S. pressed butt hinges bright finished of required sizeKiln seasoned selected class of sheesham woodSqm5,981.98
9.27.1.2.1Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws — 35 mm thick shutters — With ISI marked stainless steel butt hinges of required sizeSecond class teak woodSqm6,591.22
9.27.1.2.2Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws — 35 mm thick shutters — With ISI marked stainless steel butt hinges of required sizeKiln seasoned and chemically treated hollock woodSqm3,894.24
9.27.1.2.3Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws — 35 mm thick shutters — With ISI marked stainless steel butt hinges of required sizeKiln seasoned selected class of sheesham woodSqm6,134.40
9.27.1.2.4Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws — 35 mm thick shutters — With ISI marked stainless steel butt hinges of required sizeFirst class kail woodSqm3,951.58
9.27.1.2.5Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws — 35 mm thick shutters — With ISI marked stainless steel butt hinges of required sizeSecond class kail woodSqm4,224.47
9.27.2.1.1Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws — 30 mm thick shutters — with ISI marked M.S. pressed butt hinges bright finished of required sizeSecond class teak woodSqm5,680.30
9.27.2.1.2Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws — 30 mm thick shutters — with ISI marked M.S. pressed butt hinges bright finished of required sizeKiln seasoned and chemically treated hollock woodSqm3,371.60
9.27.2.1.3Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws — 30 mm thick shutters — with ISI marked M.S. pressed butt hinges bright finished of required sizeKiln seasoned selected class of sheesham woodSqm5,289.24
9.27.2.2.1Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws — 30 mm thick shutters — With ISI marked stainless steel butt hinges of required sizeSecond class teak woodSqm5,832.72
9.27.2.2.2Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws — 30 mm thick shutters — With ISI marked stainless steel butt hinges of required sizeKiln seasoned and chemically treated hollock woodSqm3,524.02
9.27.2.2.3Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws — 30 mm thick shutters — With ISI marked stainless steel butt hinges of required sizeKiln seasoned selected class of sheesham woodSqm5,441.66
9.31.1Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS: 14616, and as per TADS 15:2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS:1568, for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, as per directions of Engineer- in-charge: (Note:- Butt hinges and necessary screws shall be paid separately)35 mm thick shuttersSqm3,272.05
9.31.2Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS: 14616, and as per TADS 15:2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS:1568, for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, as per directions of Engineer- in-charge: (Note:- Butt hinges and necessary screws shall be paid separately)30 mm thick shuttersSqm2,849.53
9.40.1.1Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete — 2nd class teak wood50x12 mmMetre270.91
9.40.1.2Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete — 2nd class teak wood50 x 20 mmMetre352.42
9.40.2.1Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete — Kiln seasoned and chemically treated hollock wood50x12 mmMetre195.66
9.40.2.2Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete — Kiln seasoned and chemically treated hollock wood50x20 mmMetre226.99
9.41.1Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately), including fixing 50x12 mm beading complete withSecond class teak woodSqm3,930.27
9.42Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS: 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all completeMetre653.03
9.43Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all completeMetre757.75
9.44.1Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wideNon decorative veneer on both sidesMetre43.02
9.44.2Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wideParticle board with decorative veneering on both sidesMetre135.44
9.45Providing and fixing teak wood lipping of size 25x3 mm in pelmetMetre82.69
9.46.1Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete12 mm diaMetre389.50
9.46.2Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete20 mm diaMetre526.07
9.46.3Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete25 mm diaMetre678.29
9.47.1Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets20 mm dia (heavy type)Metre207.25
9.47.2Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets25 mm dia (heavy type)Metre227.60
9.48.1Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all completeFixed to steel windows by weldingKG220.90
9.48.2Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all completeFixed to openings /wooden frames with rawl plugs screws etcKG242.66
9.49Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all completeSqm1,859.41
9.50Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all completeSqm2,787.76
9.52Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thickSqm220.51
9.53Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diaMetre bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size)Each256.24
9.54.1Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete withSal woodCum1,51,762.10
9.54.2Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete withHollock woodCum75,905.74
9.55.1Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete125x65x2.12 mmEach65.25
9.55.2Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete100x58x1.90 mmEach52.11
9.55.3Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete75x47x1.70 mmEach41.65
9.55.4Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete50x37x1.50 mmEach21.81
9.56.1Providing and fixing ISI marked, IS: 1341, M.S. heavy weight butt hinges with necessary screws etc. complete125x90x4.00 mmEach73.22
9.56.2Providing and fixing ISI marked, IS: 1341, M.S. heavy weight butt hinges with necessary screws etc. complete100x75x3.50 mmEach63.34
9.56.3Providing and fixing ISI marked, IS: 1341, M.S. heavy weight butt hinges with necessary screws etc. complete75x60x3.10 mmEach47.77
9.56.4Providing and fixing ISI marked, IS: 1341, M.S. heavy weight butt hinges with necessary screws etc. complete50x40x2.50 mmEach26.50
9.57.1Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete125x65x2.12 mmEach62.87
9.57.2Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete100x58x1.90 mmEach54.61
9.57.3Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete75x47x1.70 mmEach44.12
9.57.4Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete50x37x1.50 mmEach23.60
9.58.1Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc.complete150x125x27x2.80 mmEach101.24
9.58.2Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc.complete125x125x27x2.80 mmEach95.26
9.58.3Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc.complete100x125x27x2.80 mmEach86.87
9.58.4Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc.complete75x100x20x2.24 mmEach74.04
9.59.1Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.complete150 mmEach350.38
9.59.2Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.complete125 mmEach316.24
9.59.3Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.complete100 mmEach277.32
9.60.1Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete150 mmEach384.53
9.60.2Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete125 mmEach350.38
9.60.3Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete100 mmEach314.30
9.61.1Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., completeOverall width 35 mmMetre362.57
9.61.2Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., completeOverall width 50 mmMetre361.14
9.61.3Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., completeOverall width 65 mmMetre382.48
9.62.1Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete300x16 mmEach280.74
9.62.2Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete250x16 mmEach260.74
9.63.1Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete250x10 mmEach108.98
9.63.2Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete200x10 mmEach93.80
9.63.3Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete150x10 mmEach78.97
9.63.4Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete100x10 mmEach59.48
9.64Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. completeEach143.69
9.65.1Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete300x20x6 mmEach125.53
9.65.2Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete250x20x6 mmEach99.93
9.66.1Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc.complete125 mmEach54.19
9.66.2Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc.complete100 mmEach42.45
9.66.3Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc.complete75 mmEach36.76
9.67.1Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS: 363 with necessary screws etc. complete150 mmEach41.94
9.67.2Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS: 363 with necessary screws etc. complete115 mmEach37.02
9.67.3Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS: 363 with necessary screws etc. complete90 mmEach31.33
9.68.1Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc.complete300 mm weighing not less than 200 gramsEach86.91
9.68.2Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc.complete250 mm weighing not less than 150 gramsEach78.23
9.68.3Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc.complete200 mm weighing not less than 120 gramsEach62.58
9.69Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors, (weighting not lessEach115.82
9.70.1Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc125x64x1.90 mmEach111.69
9.70.2Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc100X58X1.90 mmEach100.73
9.70.3Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc75x47x1.80 mmEach75.02
9.70.4Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc50x37x1.50 mmEach42.89
9.71.1Providing and fixing IS: 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete125x64x2.50 mmEach121.86
9.71.2Providing and fixing IS: 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete100x60x2.50 mmEach99.95
9.71.3Providing and fixing IS: 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete75x50x2.50 mmEach82.85
9.72.1Providing and fixing bright finished brass butt hinges with necessary screws etc. complete125x85x5.5 mm (heavy type)Each316.47
9.72.2Providing and fixing bright finished brass butt hinges with necessary screws etc. complete125x70x4 mm (ordinary type)Each216.60
9.72.3Providing and fixing bright finished brass butt hinges with necessary screws etc. complete100x85x5.5 mm (heavy type)Each236.65
9.72.4Providing and fixing bright finished brass butt hinges with necessary screws etc. complete100x70x4 mm (ordinary type)Each165.66
9.72.5Providing and fixing bright finished brass butt hinges with necessary screws etc. complete75x65x4 mm (heavy type)Each197.35
9.72.6Providing and fixing bright finished brass butt hinges with necessary screws etc. complete75x40x2.5 mm (ordinary type)Each112.71
9.72.7Providing and fixing bright finished brass butt hinges with necessary screws etc. complete50x40x2.5 mm (ordinary type)Each48.06
9.73.1Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete150x125x27x5 mmEach539.78
9.73.2Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete125x125x27x5 mmEach482.16
9.73.3Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete100x125x27x5 mmEach443.18
9.73.4Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete75x100x20x3.2 mmEach383.55
9.74.1Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete250x10 mmEach473.57
9.74.2Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete200x10 mmEach379.90
9.74.3Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete150x10 mmEach294.54
9.74.4Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete100x10 mmEach204.43
9.75.1Providing and fixing bright finished brass door latch with necessary screws etc. complete300x16x5 mmEach370.49
9.75.2Providing and fixing bright finished brass door latch with necessary screws etc. complete250x16x5 mmEach363.38
9.76Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of leverhandles of approved quality with necessary screws etc. completeEach975.67
9.77Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. completeEach751.38
9.78Providing and fixing bright finished brass night latch of approved quality including necessary screws etc.completeEach1,348.40
9.79.1Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete40 mmEach519.01
9.79.2Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete50 mmEach536.08
9.79.3Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete65 mmEach602.94
9.79.4Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete75 mmEach628.55
9.80Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality withEach87.14
9.81.1Providing and fixing bright finished brass handles with screws etc. complete125 mmEach295.72
9.81.2Providing and fixing bright finished brass handles with screws etc. complete100 mmEach277.94
9.81.3Providing and fixing bright finished brass handles with screws etc. complete75 mmEach218.19
9.82Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.completeEach184.67
9.83Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm),with necessary accessories and screws etc. completeEach2,058.58
9.84Providing and fixing aluminium extruded section brand logo with ISi, IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door body tubular type universal hydraulic door closer width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. completeEach1,105.82
9.85Providing and fixing bright finished brass casement window fastener with necessary screws etc.completeEach96.65
9.86.1Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc.complete300 mm weighing not less than 330 gmsEach277.22
9.86.2Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc.complete250 mm weighing not less than 280 gmsEach189.13
9.86.3Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc.complete200 mm weighing not less than 240 gmsEach189.13
9.87.1Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete150 mmEach168.39
9.87.2Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete115 mmEach150.96
9.87.3Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete90 mmEach134.03
9.88Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. completeEach1,162.04
9.89Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. completeEach1,162.04
9.90.1Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. completeSize 40 mmEach493.40
9.90.2Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. completeSize 50mmEach528.96
9.90.3Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. completeSize 65 mmEach581.60
9.90.4Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. completeSize 75 mmEach615.75
9.91Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts completeEach172.50
9.92.1Providing and fixing chromium plated brass handles with necessary screws etc. complete125 mmEach338.40
9.92.2Providing and fixing chromium plated brass handles with necessary screws etc. complete100 mmEach303.55
9.92.3Providing and fixing chromium plated brass handles with necessary screws etc. complete75 mmEach260.87
9.93Providing and fixing chromium plated brass casement window fastener with necessary screws etc.completeEach180.25
9.94.1Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete300 mm weighing not less than 330 gmsEach289.79
9.94.2Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete250 mm weighing not less than 280 gmsEach255.65
9.94.3Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete200 mm weighing not less than 240 gmsEach230.04
9.95.1Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete125x75x4 mmEach167.38
9.95.2Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete125x63x4 mmEach158.99
9.95.3Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete100x75x4 mmEach131.33
9.95.4Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete100x63x4 mmEach134.28
9.95.5Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete100x63x3.2 mmEach134.28
9.95.6Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete75x63x4 mmEach109.00
9.95.7Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete75x63x3.2 mmEach91.82
9.95.8Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete75x45x3.2 mmEach92.92
9.96.1Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc.complete300x16 mmEach376.53
9.96.2Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc.complete250x16 mmEach316.78
9.97.1Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete300x10 mmEach157.71
9.97.2Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete250x10 mmEach138.22
9.97.3Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete200x10 mmEach120.63
9.97.4Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete150x10 mmEach106.52
9.97.5Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete100x10 mmEach80.60
9.98Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws bolts,nut and washers etc. completeEach122.35
9.99Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15 mm, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. completeEach300.53
9.100.1Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete125 mmEach86.68
9.100.2Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete100 mmEach76.08
9.100.3Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete75 mmEach66.04
9.101.1Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. completeSingle rubber stopperEach71.40
9.101.2Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. completeTwin rubber stopperEach75.81
9.102Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc.completeEach86.35
9.103Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc. completeEach875.38
9.104Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rodMetre199.06
9.105.1Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm (both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia Metre 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks)Sqm2,199.56
9.105.2Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm (both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia Metre 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or5mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster 7 board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks)Sqm2,174.51
9.105.3Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm (both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia Metre 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./ sq.cmcellulose fiber manufactured through autoclavingSqm2,224.30
9.105.4Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm (both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia Metre 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or66mm overall thickness partition using 8mm thick double skin multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screwsSqm2,227.15
9.105.5Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm (both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia Metre 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or66 mm overall thickness partition using 8 mm thick double skin multipurpose cement bonded wood particle board manufactured as per IS: 14276 with suitable cement bonded board screwsSqm2,639.80
9.106.1Providing and fixing PTMT handles with necessary screws etc. complete125x34x24 mm weighing not less than 23 gmsEach62.70
9.106.2Providing and fixing PTMT handles with necessary screws etc. complete150x34x24 mm weighing not less than 26 gmsEach116.62
9.107.1Providing and fixing PTMT Butt hinges with necessary screws etc. complete75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gmsEach116.62
9.107.2Providing and fixing PTMT Butt hinges with necessary screws etc. complete100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gmsEach144.72
9.108.1Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete152x42x18 mm weighing not less than 60 gmsEach125.58
9.108.2Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete202x42x18 mm weighing not less than 78 gmsEach164.19
9.109Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gmsEach51.63
9.110Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25 mm, fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-chargeSqm735.07
9.111.1Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc.with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood50x50 mm (base and height)Metre452.26
9.112Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-chargeMetre106.16
9.113Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in- chargeEach851.36
9.114.1Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. completeTriple strip vertical typeEach57.12
9.114.2Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. completeDouble strip (horizontal type)Each49.29
9.115Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc.complete as per directions of Engineer- in-chargeSet469.31
9.116Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)Each24.41
9.117.1Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frameto be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-chargeExtruded section profile size 48x40 mmMetre601.03
9.117.2Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frameto be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-chargeExtruded section profile size 42x50 mmMetre350.64
9.118.1Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and railsmitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm havingwall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by insertinggalvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H'section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to theshutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.2mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mmgalvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specificationand direction of Engineer-in-charge. (For W.C. and bathroom door shutter)Sqm3,360.08
9.118.2Providing and fixing to existing door frames30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a Upvc hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.3 thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.3 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer- in-chargeSqm3,494.66
9.118.3Providing and fixing to existing door frames25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm).PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam.The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate placesSqm3,709.05
9.119Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm,made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame.The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-ChargeMetre478.28
9.120.1Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mmshall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing30 mm thick plain PVC door shuttersSqm3,420.38
9.120.2Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mmshall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing30 mm thick pre laminated PVC door shuttersSqm3,958.71
9.121Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frameMetre878.89
9.122.1Providing and fixing to existing door frames30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to framesSqm4,387.49
9.122.2Providing and fixing to existing door frames30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing paraMetres of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-chargeSqm4,645.70
9.123Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-chargeMetre603.47
9.124.1Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of theNon decorative finishSqm3,902.37
9.124.2Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of theDecorative finish (both side wood grained finish)Sqm4,434.44
9.125Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesiveSqm1,498.54
9.126.1Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion nside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thickMarine plywood conforming to IS: 710Sqm2,689.58
9.126.2Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion nside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thickFire retardant plywood conforming to IS: 5509Sqm2,864.09
9.127.1Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S, including cost of adhesive of approved quality1.5 mm thickSqm1,059.08
9.127.2Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S, including cost of adhesive of approved quality1.0 mm thickSqm911.04
9.128Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of requiredcolour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of waterand duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings. The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjasshall be measured for making payment)Sqm6,545.05
9.129Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-ChargeSqm2,373.05
9.131.1Providing and fixing factory made shutters of Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium 'U' type edge beading all- round the shutter, including fixing with angle cleat,grip strip, cadmium plated steel screws, including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of 'U' beading and hinges will be paid for separately)25 mm thickSqm1,995.63
9.132Providing and fixing aluminum U beading of required size to Pre-laminated/ flush door shutter, including fixing etc. complete as per direction of Engineerin- chargeKG675.25
9.133.1.1Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in periMetre channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. PeriMetre channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish — Tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/ sq.cm, Bending strength 100 kg/sq.cm10mm thickSqm1,737.97
9.133.2.1Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in periMetre channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. PeriMetre channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish — Multipurpose cement board reinforced with suitable fibre cement screw8 mm thick cement fibre board as per IS: 14862Sqm1,481.24
9.133.2.2Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in periMetre channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. PeriMetre channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish — Multipurpose cement board reinforced with suitable fibre cement screw8 mm thick Cement bonded wood particle board as per IS:14276Sqm1,559.51
9.133.3.1Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in periMetre channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. PeriMetre channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish — Plain Gypsum plaster board conforming to IS: 2095 Part -1:2011 (Board with BIS certification marks)12.5 mm thickSqm1,452.28
9.134.1.1.1Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws — 35 mm thick shutters — With ISI marked M.S. pressed butt hinges bright finished of required sizeSecond class teak woodSqm6,623.88
9.134.1.1.2Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws — 35 mm thick shutters — With ISI marked M.S. pressed butt hinges bright finished of required sizeKiln seasoned and chemically treated hollock woodSqm3,926.90
9.134.1.1.3Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws — 35 mm thick shutters — With ISI marked M.S. pressed butt hinges bright finished of required sizeKiln seasoned selected class of sheesham woodSqm6,167.06
9.134.1.2.1Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws — 35 mm thick shutters — With ISI marked stainless steel butt hinges of required sizeSecond class teak woodSqm6,776.30
9.134.1.2.2Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws — 35 mm thick shutters — With ISI marked stainless steel butt hinges of required sizeKiln seasoned and chemically treated hollock woodSqm4,568.70
9.134.1.2.3Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws — 35 mm thick shutters — With ISI marked stainless steel butt hinges of required sizeKiln seasoned selected class of sheesham woodSqm6,349.71
9.134.2.1.1Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws — 30 mm thick shutters — with ISI marked M.S. pressed butt hinges bright finished of required sizeSecond class teak woodSqm5,865.38
9.134.2.1.2Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws — 30 mm thick shutters — with ISI marked M.S. pressed butt hinges bright finished of required sizeKiln seasoned and chemically treated hollock woodSqm3,556.69
9.134.2.1.3Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws — 30 mm thick shutters — with ISI marked M.S. pressed butt hinges bright finished of required sizeKiln seasoned selected class of sheesham woodSqm5,474.33
9.134.2.2.1Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws — 30 mm thick shutters — With ISI marked stainless steel butt hinges of required sizeSecond class teak woodSqm6,017.80
9.134.2.2.2Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws — 30 mm thick shutters — With ISI marked stainless steel butt hinges of required sizeKiln seasoned and chemically treated hollock woodSqm3,709.11
9.134.2.2.3Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws — 30 mm thick shutters — With ISI marked stainless steel butt hinges of required sizeKiln seasoned selected class of sheesham woodSqm5,626.75
9.136Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix,suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately)Metre1,719.63
9.137Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately)Sqm7,570.54
9.138Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beadingmade out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m2) of size 20 x 33 mm screwedwith M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c, including applying a coatof approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & specialceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and asper direction of Engineer- in-charge with glass of required thickness having 60 minutes of fire resistanceboth integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturerhave to give test report/certification of fire glass and the glass should have the stamp showing the valueof E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditationbody which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 fortesting and calibration scopes shall be eligible. The maximum glazing size shall not be more than1100x2200 mm (w x h) or 2.42 sqmSqm43,283.69
9.139Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all completeEach8,367.69
9.141Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), madeout of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size191 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, thevertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm, includingproviding EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC framestrip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 9x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction ofEngineer -in- chargeMetre747.32
9.142.135 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVCprofiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, outof which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 16mm integrally extruded on the hinge side of the profile for better screw holding power, includingreinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & jointwith the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket osize 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single pieceextruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 21mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded,fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm,including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, allcomplete as per manufacturer's specification and direction of Engineer-in-chargeNon decorative finish (matt finish)Sqm4,067.46
9.142.235 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVCprofiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, outof which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 16mm integrally extruded on the hinge side of the profile for better screw holding power, includingreinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & jointwith the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket osize 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single pieceextruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 21mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded,fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm,including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, allcomplete as per manufacturer's specification and direction of Engineer-in-chargeDecorative finish (wood grained finish)Sqm4,712.20
9.143Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm xplastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profileof Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 126mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size ofanchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-chargeMetre638.58
9.144Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollowsection of size 100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side,styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x221 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVCprofile of size 28 mm x 30 mm, with wall thickness 2 mm (± 0.2 mm). Lockrail of size 100 mm x 37 mm,wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads andpanel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts andwashers complete, all as per manufacturer's specification and direction of Engineer-in- chargeSqm4,278.68
9.145Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVCprofile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long,including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVCreinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing4 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos &sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineer-in-chargeMetre715.26
9.146Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollowextruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 3mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners byinserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mmx 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion weldedtogether. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length.Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to bewelded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails,providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mmdia bright steel rod horizontally with both side threaded and tightened with check nuts and washerscomplete, all as per manufacturer's specification and direction of engineer-in-chargeSqm4,629.21
9.149Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. completeEach222.97
9.150Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. completeEach197.93
9.151Providing and fixing steel roller for uPVC sliding window with necessary screws etc. completeEach113.42
9.152Providing and fixing steel roller for uPVC sliding door with necessary screws etc. completeEach183.84
9.153Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. completeEach191.67
9.154Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube,placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre bothways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctionsand fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt,including making provision for opening for doors, windows, electrical conduits, switch boards etc.,including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-chargeKG169.57
9.155Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Prelaminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587Sqm2,591.29
9.159Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade (Grade-I)IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboardshutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISImarked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessaryscrew etc all completeSqm3,138.84
9.147A.1Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windowscomprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profilesduly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriatedimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated)casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plasticcaps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusionwelded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wallshall be filled with weather proof silicon sealant over backer rod of required size and of approved quality,all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes andsilicon sealant shall be paid separately). Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be madeFor uPVC frame, sash and mullion extruded profiles minus 5% tolerance in Note: dimension i.e. in depth& width of profile shall be acceptable.uPVC profile should be tested by BSI(UK) & SKZ(Germany) @25000 weathering hours Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series)frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead ofSqm12,253.53
9.147D.1Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in heightdimension comprising of uPVC multi-chambered frame with in- built roller track and sash extrudedprofiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to uPVC profile), appropriate dimension of uPVCextruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powdercoated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 41kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holesfinished wall shall be filled with weather proof silicon sealent over backer rod of required size and ofapproved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single /double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profiledimension in higher side shall be accepted but no extra payment on this account shall be madeFor uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. Note: in depth & widthof profile shall be acceptable.uPVC profile should be tested by BSI(UK) & SKZ(Germany) @25000 weathering hours Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm bothhaving wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of windowupto 1.75 sqm) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wiremesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of1.9 ± 0.2 mm and single glazingSqm8,880.99
9.156.1Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1999marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to bepaid separately)Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14588Sqm1,561.23
9.156.2Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1999marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to bepaid separately)Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick confirming to IS:14587Sqm2,053.57
9.157.1Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one sidedecorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws andfittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approvedbrand (fittings to be paid separately)Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick confirming to IS:14588Sqm1,927.54
9.157.2Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one sidedecorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws andfittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approvedbrand (fittings to be paid separately)Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 25 mm thick confirming to IS:14587Sqm2,965.66
9.158.1Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated oneside decorative lamination and other side balancing lamination, with necessary fixing arrangement andscrews etc. complete12 mm thickSqm1,624.16
9.158.2Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated oneside decorative lamination and other side balancing lamination, with necessary fixing arrangement andscrews etc. complete18 mm thickSqm1,810.38
9.158.3Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated oneside decorative lamination and other side balancing lamination, with necessary fixing arrangement andscrews etc. complete25 mm thickSqm2,891.73
9.160.1Providing and fixing skirting with Pre-laminated medium density fibre board exterior grade (Grade-I)conforming to IS: 14587:1998 marked, with (one side decorative and other side balancing lamination andedges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand with necessary fixingarrangements and screws, including drilling necessary holes for rawl plugs etc. all complete18 mm thickSqm2,690.40
9.160.2Providing and fixing skirting with Pre-laminated medium density fibre board exterior grade (Grade-I)conforming to IS: 14587:1998 marked, with (one side decorative and other side balancing lamination andedges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand with necessary fixingarrangements and screws, including drilling necessary holes for rawl plugs etc. all complete25 mm thickSqm3,771.74
9.161Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm onvertical sides having built in rebate made out of 1.6 mm thick GI sheet (Zinc coating not less than120gm/m2) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled withMineral wool Insulation having density min 96Kg/m3. The frame will have a provision of G.I. Anchorfastners 14 nos (5 each on vertical style & 4 on horizontal style of size M10 x 80) suitable for fixing inthe opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixingof fire rated glazed shutter. The frame shall be finished with a approved fire resistant primer or Powdercoating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge. (Costof SS ball bearing hinges is excluded)Metre2,133.76
9.162Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming toIS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge,with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mmwide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than120gm/m2) duly filled mineral wool insulation having density min 96 kg/m3 and fixing with necessarystainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat ofapproved fire resistant primer or powder coating not less than 30 micron etc all complete as perapproved fire resistant primer or powder coating not less than 30 micron etc all complete as perSqm11,457.31
9.163Providing and fixing non load bearing fixed frame for fire resistant glazed Partition for 120 minutes FireRating, made out to a profile of dimension 60mm x 70 mm of 1.6 mm thick galvanised steel sheet as pertest evidence suitable for fixing fire rated glass for 120 minutes of both integrity & radiation control(EW120) & minimum 20 minutes of insulation (EI20).The profile has to be fixed to the supportingconstruction by means of anchor fasteners of size M10 x 80, every 150 mm from the edges and every 501mm (approx) c/c. Linear measurement of frame shall be measured for payment. The frame shall be filledwith mineral wool insulation of density min 96kg/ m3. and finished with a approved fire resistant primer orPowder coating of not less than 30 micron in desired shade as per NBC 2016, IS 16231 (Part 3):2016 anddirections of Engineer - in- chargeMetre2,133.76
9.164Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beadingmade out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m2) of size 20 x 33 mm screwedwith M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c, including applying a coatof approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & specialceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and asper direction of Engineer- in-charge with glass of required thickness having 120 minutes of fireresistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). Themanufacturer have to give test report/certification of fire glass and the glass should have the stampshowing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by anyother accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as perISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not bemore than 1100x2200 mm (w x h) or 2.42 sqmSqm50,396.88
9.165.1Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete125 mmEach127.84
9.165.2Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete100mmEach97.39
9.165.3Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete75 mmEach60.97
9.166.1Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS:15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction ofEngineer-in-charge (Note: Fittings to be paid separately)18 mm thickSqm1,750.84
9.167Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS:15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing ofracks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction ofEngineer-in- chargeSqm1,272.93
9.168Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing andfixing auto closing hinges shall be paid separately)Sqm3,769.35
9.169Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine plyas per IS 710 of approved brand boxes,shelves,racks, almirah, cupboard and drawer etc. includingnecessary nails,screws etc. complete as per direction of Engineer-in-chargeSqm3,456.73
9.170.1Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge200 mmEach168.20
9.171Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) ofapproved make/brand to cupboard shutters with full threaded steel screws including making necessaryrecess in board and finished etc. complete as per direction of Engineer-in-chargeEach24.80
9.172Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make501 mm long with screws etc. complete as per directions of Engineer- in-chargeSet82.36
9.173Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories suchas right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensilbasket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement includingfinishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts &bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (Forpayment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixingaccessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing andfixing telescopic channel shall be paid separately)KG464.94
9.174Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality forcupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on bindingmachine etc. complete as per directions of Engineer- in-chargeMetre75.67
9.147C.2For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in Note: dimension i.e. in depth& width of profile shall be acceptable.uPVC profile should be tested by BSI(UK) & SKZ(Germany) @25000 weathering hours Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wallthickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profilesduly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriatedimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side ofpanels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keepsand one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainlesssteel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealent over backer rod of required size and of approved quality, all complete as perapproved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealentshall be paid separately). Variation in profile dimension in higher side shall be accepted but no extrapayment on this account shall be made. For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in Note: dimension i.e. in depth& width of profile shall be acceptable.uPVC profile should be tested by BSI(UK) & SKZ(Germany) @25000 weathering hours Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm)Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.3 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)Sqm12,623.59

Other chapters in this schedule

Pricing wood and pvc work against a live tender

Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works