Ladakh SOR 2024
Sanitary Installations rates
210 sanitary installations items from the Ladakh Public Works (R&B), effective 2024-08-01.
Sanitary Installations rates in the Ladakh Ladakh Schedule of Rates 2024 run from ₹31.99 to ₹26,282.12. Transcribed from UT of Ladakh, Public Works (R&B) Department — Ladakh Schedule of Rates (LSoR) 2024, Order No.58-LA-PW(R&B) of 2024 dated 24.07.2024, operative from 1 August 2024. Reference only — verify against the official source before pricing a bid.
/
210 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 17.7A | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer | Each | 4,134.24 |
| 17.7B | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock | Each | 1,777.78 |
| 17.16A | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge | Each | 518.98 |
| 17.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever requiredWhite Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests | Each | 7,512.60 |
| 17.1.2 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever requiredStainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests | Each | 11,985.36 |
| 17.4.1 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 6,409.79 |
| 17.4.2 | Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern | Each | 10,313.35 |
| 17.4.3 | Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern | Each | 13,870.78 |
| 17.4.4 | Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern | Each | 19,365.31 |
| 17.5.1 | Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | Each | 11,972.91 |
| 17.5.2 | Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern | Each | 17,906.55 |
| 17.5.3 | Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern | Each | 22,164.67 |
| 17.5.4 | Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern | Each | 26,282.12 |
| 17.6.1 | Single squatting plate with 5 litre P.V.C. automatic flushing cistern | Each | 9,761.09 |
| 17.6.2 | Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern | Each | 15,259.10 |
| 17.6.3 | Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern | Each | 19,362.23 |
| 17.6.4 | Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern | Each | 23,646.15 |
| 17.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 3,999.52 |
| 17.7.2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 3,305.27 |
| 17.7.3 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | Each | 3,070.53 |
| 17.7.4 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap | Each | 2,376.29 |
| 17.7.5 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap | Each | 2,925.42 |
| 17.7.6 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap | Each | 2,653.70 |
| 17.7.7 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap | Each | 2,607.89 |
| 17.7.8 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers | Each | 5,222.98 |
| 17.7.9 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI Marked | Each | 4,456.18 |
| 17.7.10 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireStainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap | Each | 3,925.54 |
| 17.7.11 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireStainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap | Each | 4,707.99 |
| 17.8 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings | Each | 1,839.48 |
| 17.9 | White glazed fire clay kitchen sink of size 600x450x250 mm | Each | 5,748.43 |
| 17.10.1.1 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required — Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250mm510x1040 mm bowl depth 250mm | Each | 7,277.79 |
| 17.10.1.2 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required — Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250mm510x1040 mm bowl depth 225mm | Each | 7,011.75 |
| 17.10.1.3 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required — Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250mm510x1040 mm bowl depth 200mm | Each | 6,698.77 |
| 17.10.1.4 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required — Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250mm510x1040 mm bowl depth 178mm | Each | 6,526.63 |
| 17.10.2.1 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required — Kitchen sink without drain board610x510 mm bowl depth 200 mm | Each | 5,180.83 |
| 17.10.2.2 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required — Kitchen sink without drain board610x460 mm bowl depth 200 mm | Each | 4,398.38 |
| 17.10.2.3 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required — Kitchen sink without drain board470x420 mm bowl depth 178 mm | Each | 3,927.35 |
| 17.11.1 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever requiredSize 450x300x150mm | Each | 6,133.96 |
| 17.11.2 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever requiredSize 600x450x200mm | Each | 7,758.61 |
| 17.12.1 | Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever requiredWhite glazed fire clay draining board of size 600x450x 25 mm | Each | 1,721.48 |
| 17.13.1 | Providing and fixing white vitreous china water closet squatting pan (Indian type)Long pattern W.C. pan of size 580 mm | Each | 2,451.21 |
| 17.13.2 | Providing and fixing white vitreous china water closet squatting pan (Indian type)Orissa pattern W.C. pan of size 580x440 mm | Each | 3,733.00 |
| 17.14.1 | Extra for using coloured W.C. pan instead of white W.C. panOrissa pattern W.C. pan 580x440 mm | Each | 617.42 |
| 17.15 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan | Each | 2,873.73 |
| 17.16 | Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern | Each | 172.57 |
| 17.17.1 | Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet250x130x30 mm | Each | 311.19 |
| 17.17.2 | Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet250x125x25 mm | Each | 350.32 |
| 17.18.1 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete10 litre capacity-White | Each | 1,380.38 |
| 17.18.2 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete10 litre capacity-coloured | Each | 1,349.09 |
| 17.19.1 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete10 litre (full flush) capacity-white | Each | 2,727.88 |
| 17.19.2 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete10 litre (full flush) capacity-coloured | Each | 2,910.97 |
| 17.20.1 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan completeWhite solid plastic seat with lid | Each | 849.06 |
| 17.20.2 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan completeBlack solid plastic seat with lid | Each | 729.56 |
| 17.20.3 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan completeColoured (other than black & white) solid plastic seat with lid | Each | 756.59 |
| 17.21 | Extra for providing coloured other than black solid P.V.C. plastic seat and cover in European type W.C. pan, instead of white plastic seat and cover | Each | 92.47 |
| 17.22 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan | Each | 160.51 |
| 17.22A | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge | Each | 1,017.19 |
| 17.22B | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia | Each | 7,960.30 |
| 17.23 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively | Each | 1,739.23 |
| 17.24 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe | Each | 4,684.02 |
| 17.25.1 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittingsFlat back wash basin of size 630x450mm | Each | 1,974.77 |
| 17.25.2 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittingsFlat back wash basin of size 550x400mm | Each | 1,045.78 |
| 17.25.3 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittingsAngle back wash basin of size 600x480 mm | Each | 1,594.92 |
| 17.25.4 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittingsAngle back wash basin of size 400x400mm | Each | 1,323.20 |
| 17.25.5 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittingsFlat back wash basin of size 450x300 mm | Each | 1,277.39 |
| 17.25.6 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittingsSurgeon type wash basin of size 660x460mm | Each | 3,053.12 |
| 17.26.1 | Providing and fixing kitchen sink including making all connections excluding cost of fittingsWhite glazed fire clay sink of size 600x450x250mm | Each | 3,914.89 |
| 17.27.1 | Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittingsSize 450x300x150 mm | Each | 3,214.95 |
| 17.27.2 | Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittingsSize 600x450x200 mm | Each | 4,839.60 |
| 17.28.1.1 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete — Semi rigid pipe32 mm dia | Each | 160.72 |
| 17.28.1.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete — Semi rigid pipe40 mm dia | Each | 176.36 |
| 17.28.2.1 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete — Flexible pipe32 mm dia | Each | 168.97 |
| 17.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete — Flexible pipe40 mm dia | Each | 194.00 |
| 17.29 | Providing and fixing 100 mm sand cast Iron grating for gully trap | Each | 76.03 |
| 17.30 | Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design | Each | 65.45 |
| 17.31 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete | Each | 1,989.99 |
| 17.32.1 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backingCircular shape 450mm dia | Each | 1,646.12 |
| 17.32.2 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backingRectangular shape 453x357mm | Each | 1,383.42 |
| 17.32.3 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backingOval shape 450x350mm (outer dimensions) | Each | 1,460.18 |
| 17.32.4 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backingRectangular shape 1500x450 mm | Each | 2,427.41 |
| 17.33 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete | Each | 1,049.18 |
| 17.34.1 | Providing and fixing toilet paper holderC.P. brass | Each | 1,282.47 |
| 17.34.2 | Providing and fixing toilet paper holderVitreous china | Each | 867.11 |
| 17.35.1.1 | Sand cast iron S&S pipe as per IS: 1729 | Metre | 1,353.24 |
| 17.35.1.2 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 | Metre | 1,463.30 |
| 17.35.2.1 | 75 mm diameterSand cast iron S&S pipe as per IS: 1729 | Metre | 1,198.93 |
| 17.35.2.2 | 75 mm diameterCentrifugally cast (spun) iron socketed pipe as per IS: 3989 | Metre | 1,134.59 |
| 17.35.2.3 | 75 mm diameterHubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 | Metre | 1,011.83 |
| 17.36.1 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 (1 cement: 2 fine sand) in S.C.I./ C.I. Pipes75 mm dia pipe | Each | 181.38 |
| 17.36.2 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 (1 cement: 2 fine sand) in S.C.I./ C.I. Pipes100 mm dia pipe | Each | 182.53 |
| 17.37.1 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etcFor 100 mm dia. Pipe | Each | 360.95 |
| 17.37.2 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etcFor 75 mm dia. Pipe | Each | 359.52 |
| 17.38.1.1 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 100 mm diaSand cast iron S&S as per IS - 1729 | Each | 742.87 |
| 17.38.1.2 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 100 mm diaSand cast iron S&S as per IS - 3989 | Each | 676.01 |
| 17.38.1.3 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 100 mm diaHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 | Each | 666.76 |
| 17.38.2.1 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 75 mm diaSand cast iron S&S as per IS - 1729 | Each | 579.97 |
| 17.38.2.2 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 75 mm diaSand cast iron S&S as per IS- 3989 | Each | 511.68 |
| 17.38.2.3 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 75 mm diaHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 | Each | 530.18 |
| 17.39.1.1 | Providing and fixing plain bend of required degree — 100 mm diaSand cast iron S&S as per IS - 1732 | Each | 616.26 |
| 17.39.1.2 | Providing and fixing plain bend of required degree — 100 mm diaSand cast iron S&S as per IS: 3989 | Each | 488.22 |
| 17.39.1.3 | Providing and fixing plain bend of required degree — 100 mm diaHubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 | Each | 412.82 |
| 17.39.2.1 | Providing and fixing plain bend of required degree — 75 mm diaSand cast iron S&S as per IS -1729 | Each | 486.08 |
| 17.39.2.2 | Providing and fixing plain bend of required degree — 75 mm diaSand cast iron S&S as per IS - 3989 | Each | 332.43 |
| 17.39.2.3 | Providing and fixing plain bend of required degree — 75 mm diaHubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 | Each | 292.60 |
| 17.40.1.1 | Providing and fixing heel rest sanitary bend — 100 mm diaSand cast iron S&S as per IS - 1729 | Each | 730.07 |
| 17.40.1.2 | Providing and fixing heel rest sanitary bend — 100 mm diaSand cast iron S&S as per IS - 3989 | Each | 662.35 |
| 17.40.2.1 | Providing and fixing heel rest sanitary bend — 75 mm diaSand cast iron S&S as per IS - 1729 | Each | 575.70 |
| 17.40.2.2 | Providing and fixing heel rest sanitary bend — 75 mm diaSand cast iron S&S as per IS - 3989 | Each | 449.09 |
| 17.41.1.1 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 100x100x100x100mmSand cast iron S&S as per IS - 1729 | Each | 1,837.79 |
| 17.41.1.2 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 100x100x100x100mmSand cast iron S&S as per IS - 3989 | Each | 1,009.82 |
| 17.41.2.1 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 75x75x75x75 mmSand cast iron S&S as per IS - 1729 | Each | 1,477.65 |
| 17.41.2.2 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 75x75x75x75 mmSand cast iron S&S as per IS - 3989 | Each | 801.90 |
| 17.42.1.1 | Providing and fixing double equal plain junction of required degree — 100x100x100x100 mmSand cast iron S&S as per IS - 1729 | Each | 1,190.29 |
| 17.42.1.2 | Providing and fixing double equal plain junction of required degree — 100x100x100x100 mmSand cast iron S&S as per IS - 3989 | Each | 967.65 |
| 17.42.1.3 | Providing and fixing double equal plain junction of required degree — 100x100x100x100 mmHubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 | Each | 850.99 |
| 17.42.2.1 | Providing and fixing double equal plain junction of required degree — 75x75x75x75 mmSand cast iron S&S as per IS - 1729 | Each | 858.81 |
| 17.42.2.2 | Providing and fixing double equal plain junction of required degree — 75x75x75x75 mmSand cast iron S&S as per IS - 3989 | Each | 725.08 |
| 17.42.2.3 | Providing and fixing double equal plain junction of required degree — 75x75x75x75 mmHubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 | Each | 472.56 |
| 17.43.1.1 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 100x100x100 mmSand cast iron S&S as per IS - 1729 | Each | 1,001.79 |
| 17.43.1.2 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 100x100x100 mmSand cast iron S&S as per IS - 3989 | Each | 821.12 |
| 17.43.2.1 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 75x75x75 mmSand cast iron S&S as per IS - 1729 | Each | 1,186.01 |
| 17.44.1.1 | Providing and fixing single equal plain junction of required degree — 100x100x100 mmSand cast iron S&S as per IS - 1729 | Each | 1,198.12 |
| 17.44.1.2 | Providing and fixing single equal plain junction of required degree — 100x100x100 mmSand cast iron S&S as per IS - 3989 | Each | 778.44 |
| 17.44.1.3 | Providing and fixing single equal plain junction of required degree — 100x100x100 mmHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 | Each | 678.85 |
| 17.44.2.1 | Providing and fixing single equal plain junction of required degree — 75x75x75 mmSand cast iron S&S as per IS - 1729 | Each | 669.60 |
| 17.44.2.2 | Providing and fixing single equal plain junction of required degree — 75x75x75 mmSand cast iron S&S as per IS - 3989 | Each | 550.09 |
| 17.44.2.3 | Providing and fixing single equal plain junction of required degree — 75x75x75 mmHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 | Each | 378.67 |
| 17.45.1.1 | Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 100x100x75x75 mmSand cast iron S&S as per IS - 1729 | Each | 1,496.87 |
| 17.45.1.2 | Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 100x100x75x75 mmSand cast iron S&S as per IS - 3989 | Each | 1,888.09 |
| 17.46.1.1 | Providing and fixing double unequal plain junction of required degree — 100x100x75x75 mmSand cast iron S&S as per IS - 1729 | Each | 1,250.75 |
| 17.46.1.2 | Providing and fixing double unequal plain junction of required degree — 100x100x75x75 mmSand cast iron S&S as per IS - 3989 | Each | 1,213.77 |
| 17.46.1.3 | Providing and fixing double unequal plain junction of required degree — 100x100x75x75 mmHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 | Each | 678.85 |
| 17.47.1.1 | Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 100x100x75 mmSand cast iron S&S as per IS - 1732 | Each | 1,208.07 |
| 17.47.1.2 | Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete — 100x100x75 mmSand cast iron S&S as per IS - 3989 | Each | 1,038.78 |
| 17.48.1.1 | Providing and fixing single unequal plain junction of required degree — 100x100x75 mmSand cast iron S&S as per IS - 1729 | Each | 1,016.02 |
| 17.48.1.2 | Providing and fixing single unequal plain junction of required degree — 100x100x75 mmSand cast iron S&S as per IS - 3989 | Each | 923.55 |
| 17.48.1.3 | Providing and fixing single unequal plain junction of required degree — 100x100x75 mmHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 | Each | 639.73 |
| 17.49.1.1 | Providing and fixing double equal plain invert branch of required degree — 100x100x100x100mmSand cast iron S&S as per IS - 1729 | Each | 984.72 |
| 17.49.1.2 | Providing and fixing double equal plain invert branch of required degree — 100x100x100x100mmSand cast iron S&S as per IS 3989 | Each | 836.77 |
| 17.49.1.3 | Providing and fixing double equal plain invert branch of required degree — 100x100x100x100mmHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 | Each | 1,030.96 |
| 17.49.2.1 | Providing and fixing double equal plain invert branch of required degree — 75x75x75x75 mmSand cast iron S&S as per IS - 1729 | Each | 762.07 |
| 17.49.2.2 | Providing and fixing double equal plain invert branch of required degree — 75x75x75x75 mmSand cast iron S&S as per IS - 3989 | Each | 695.20 |
| 17.50.1.1 | Providing and fixing single equal plain invert branch of required degree — 100x100x100 mmSand cast iron S&S as per iron 1729 | Each | 789.82 |
| 17.50.1.2 | Providing and fixing single equal plain invert branch of required degree — 100x100x100 mmSand cast iron S&S as per IS - 3989 | Each | 677.43 |
| 17.50.1.3 | Providing and fixing single equal plain invert branch of required degree — 100x100x100 mmHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 | Each | 663.20 |
| 17.50.2.1 | Providing and fixing single equal plain invert branch of required degree — 75x75x75 mmSand cast iron S&S as per IS - 1729 | Each | 666.75 |
| 17.50.2.2 | Providing and fixing single equal plain invert branch of required degree — 75x75x75 mmSand cast iron S&S as per IS - 3989 | Each | 521.64 |
| 17.50.2.3 | Providing and fixing single equal plain invert branch of required degree — 75x75x75 mmHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 | Each | 449.09 |
| 17.51.1.1 | Providing and fixing double unequal invert branch of required degree — 100x100x75x75 mmSand cast iron S&S as per IS - 1729 | Each | 1,068.66 |
| 17.51.1.2 | Providing and fixing double unequal invert branch of required degree — 100x100x75x75 mmSand cast iron S&S as per IS - 3989 | Each | 1,112.76 |
| 17.52.1.1 | Providing and fixing single unequal plain invert branch of required degree — 100x100x75 mmSand cast iron S&S as per IS - 1729 | Each | 899.36 |
| 17.52.1.2 | Providing and fixing single unequal plain invert branch of required degree — 100x100x75 mmSand cast iron S&S as per IS - 3989 | Each | 850.99 |
| 17.52.1.3 | Providing and fixing single unequal plain invert branch of required degree — 100x100x75 mmHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 | Each | 725.80 |
| 17.55.1.1 | Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete — 100mmSand cast iron S&S as per IS - 1729 | Each | 917.86 |
| 17.55.1.2 | Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete — 100mmSand cast iron S&S as per IS - 3989 | Each | 912.17 |
| 17.55.2.1 | Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete — 75 mmSand cast iron S&S as per IS - 1729 | Each | 560.05 |
| 17.55.2.2 | Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete — 75 mmSand cast iron S&S as per IS - 3989 | Each | 673.86 |
| 17.56.1.1 | Providing and fixing terminal guard — 100 mmSand cast iron S&S as per IS - 1729 | Each | 481.11 |
| 17.56.1.2 | Providing and fixing terminal guard — 100 mmSand cast iron S&S as per IS - 3989 | Each | 650.40 |
| 17.56.1.3 | Providing and fixing terminal guard — 100 mmHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 | Each | 590.65 |
| 17.56.2.1 | Providing and fixing terminal guard — 75 mmSand cast iron S&S as per IS - 1729 | Each | 592.77 |
| 17.56.2.2 | Providing and fixing terminal guard — 75 mmSand cast iron S&S as per IS - 3989 | Each | 460.47 |
| 17.57.1.1 | Providing and fixing collar — 100 mmSand cast iron S&S as per IS - 1729 | Each | 510.98 |
| 17.57.1.2 | Providing and fixing collar — 100 mmSand cast iron S&S as per IS - 3989 | Each | 650.40 |
| 17.57.2.1 | Providing and fixing collar — 75 mmSand cast iron S&S as per IS - 1729 | Each | 348.08 |
| 17.57.2.2 | Providing and fixing collar — 75 mmSand cast iron S&S as per IS - 3989 | Each | 400.72 |
| 17.58.1 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter100mm | Each | 654.74 |
| 17.57A.1.1 | Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe — 100 mm diaSS 304 grade coupling with EPDM rubber gasket | Each | 483.24 |
| 17.58.2 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter75 mm | Each | 557.45 |
| 17.59.2 | Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter75 mm | Each | 127.57 |
| 17.60.1.1 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors — 100 mm inlet and 100 mm outletSand cast iron S&S as per IS: 3989 | Each | 1,826.22 |
| 17.60.1.3 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors — 100 mm inlet and 100 mm outletHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 | Each | 897.94 |
| 17.57A.2.1 | Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe — 75 mm diaSS 304 grade coupling with EPDM rubber gasket | Each | 682.40 |
| 17.58.3 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter50 mm | Each | 454.04 |
| 17.59.1 | Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter100 mm | Each | 172.40 |
| 17.59.3 | Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter50 mm | Each | 96.88 |
| 17.60.1.2 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors — 100 mm inlet and 100 mm outletSand Cast Iron S&S as per IS: 1729 | Each | 1,638.43 |
| 17.60.2.1 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors — 100 mm inlet and 75 mm outletSand cast iron S&S as per IS - 3989 | Each | 1,904.47 |
| 17.60.2.2 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors — 100 mm inlet and 75 mm outletSand Cast Iron S&S as per IS- 1729 | Each | 1,503.28 |
| 17.60.2.3 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors — 100 mm inlet and 75 mm outletHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 | Each | 655.38 |
| 17.61.1 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4(1 cement: 4 coarse sand)100 mm dia | Metre | 680.46 |
| 17.61.2 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4(1 cement: 4 coarse sand)75 mm dia | Metre | 488.60 |
| 17.61.3 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4(1 cement: 4 coarse sand)50 mm dia | Metre | 317.40 |
| 17.62 | Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work | Each | 980.90 |
| 17.63 | Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary | Each | 669.96 |
| 17.64 | Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete | Each | 290.12 |
| 17.65.1 | Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work100 mm diameter pipe | Metre | 87.48 |
| 17.65.2 | Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work75 mm diameter pipe | Metre | 66.65 |
| 17.66.1 | Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc100 mm diameter pipe | Metre | 42.75 |
| 17.66.2 | Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc75 mm diameter pipe | Metre | 31.99 |
| 17.67 | Repainting bath tub of size 1700x730x430mm with enamel paint | Each | 717.14 |
| 17.68.1 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requiredWhite vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend | Each | 14,301.70 |
| 17.69.1 | Providing and fixing PTMT Waste Coupling for washbasin and sink, of approved quality and colourWaste coupling 3.1 mm of 79mm length and 62mm breadth weighing not less than 45gms | Each | 147.06 |
| 17.70.1 | Providing and fixing PTMT Bottle Trap for Wash basin and sinkBottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms | Each | 477.68 |
| 17.70.2 | Providing and fixing PTMT Bottle Trap for Wash basin and sinkBottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms | Each | 591.49 |
| 17.71 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms | Each | 336.30 |
| 17.72 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms | Each | 290.60 |
| 17.73.1 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms | Each | 887.28 |
| 17.73.2 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms | Each | 951.67 |
| 17.74 | Providing and fixing PTMT shelf 440 mm long, 124 mm widthand 36 mm height of approved quality and colour, weighing not less than 300gms | Each | 1,009.34 |
| 17.75 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms | Each | 139.12 |
| 17.76.1 | Providing and fixing PTMT urinal cock of approved quality and colour15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms | Each | 211.50 |
| 17.77.1 | Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipeTotal bracket length 580 mm of approved shape and design (for single 100 mmdia pipe) | Each | 206.72 |
| 17.77.2 | Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipeTotal bracket length 810mm of approved shape and design (for two 100 mm dia pipes) | Each | 431.15 |
| 17.77.3 | Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipeTotal bracket length 1040 mm of approved shape and design (for three 100mm dia pipes) | Each | 520.14 |
| 17.78 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings,nuts, bolts and gasket etc complete | Each | 17,199.49 |
| 17.79 | Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal | Each | 20,110.28 |
| 17.80 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge | Each | 1,839.48 |
| 17.81 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge | Each | 22,944.17 |
| 17.96.2 | Waste coupling 38mm of 83mm length and 77mm breadth, weighing not less than 60gms | Each | 220.18 |
Other chapters in this schedule
- Earth work (40)
- Concrete Work (59)
- Reinforced Cement Concrete (106)
- Masonary Work (50)
- Stone Work (43)
- Cladding Work (49)
- Wood and PVC Work (342)
- Steel Work (53)
- Flooring Work (110)
- Roofing Work (123)
- Finishing Work (134)
- Repairs to Building (82)
- Dismantling and Demolishing (60)
- Road Work (121)
- Water Supply (399)
- Drainage (68)
- Pile Work (31)
- Aluminium Work (33)
- Water Proofing (25)
- River and Canal Protection Work (8)
- Canal Lining Works (31)
- Slip Clearance (5)
- Rain Water Harvasting and Tube Wells (37)
- Conservation Of Heritage Building (7)
- Horticulture and Land Scaping (31)
- Structural Glazing Aluminium Composit Panel (5)
- New Technologies & Materials (166)
- Special Items for Ladakh (21)
Pricing sanitary installations against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works