Ladakh SOR 2024
Finishing Work rates
134 finishing work items from the Ladakh Public Works (R&B), effective 2024-08-01.
Finishing Work rates in the Ladakh Ladakh Schedule of Rates 2024 run from ₹10.48 to ₹1,368.66. Transcribed from UT of Ladakh, Public Works (R&B) Department — Ladakh Schedule of Rates (LSoR) 2024, Order No.58-LA-PW(R&B) of 2024 dated 24.07.2024, operative from 1 August 2024. Reference only — verify against the official source before pricing a bid.
/
134 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 13.1.1 | 12 mm cement plaster of mix1:4 (1 cement: 4 fine sand) | Sqm | 366.02 |
| 13.48A.1 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additivesNew work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm | Sqm | 191.16 |
| 13.1.2 | 12 mm cement plaster of mix1:6 (1 cement: 6 fine sand) | Sqm | 335.11 |
| 13.2.1 | 15 mm cement plaster on the rough side of single or half brick wall of mix1:4 (1 cement: 4 fine sand) | Sqm | 424.32 |
| 13.2.2 | 15 mm cement plaster on the rough side of single or half brick wall of mix1:6 (1 cement: 6 fine sand) | Sqm | 387.40 |
| 13.3.1 | 20 mm cement plaster of mix1:4 (1 cement: 4 fine sand) | Sqm | 467.46 |
| 13.3.2 | 20 mm cement plaster of mix1:6 (1 cement: 6 fine sand) | Sqm | 460.50 |
| 13.4.1 | 12 mm cement plaster of mix1:4 (1 cement: 4 coarse sand) | Sqm | 366.02 |
| 13.4.2 | 12 mm cement plaster of mix1:6 (1 cement: 6 coarse sand) | Sqm | 335.11 |
| 13.5.1 | 15 mm cement plaster on rough side of single or half brick wall of mix1:4 (1 cement: 4 coarse sand) | Sqm | 424.32 |
| 13.5.2 | 15 mm cement plaster on rough side of single or half brick wall of mix1:6 (1 cement: 6 coarse sand) | Sqm | 387.40 |
| 13.6.1 | 20 mm cement plaster of mix1:4 (1 cement: 4 coarse sand) | Sqm | 508.58 |
| 13.6.2 | 20 mm cement plaster of mix1:6 (1 cement: 6 coarse sand) | Sqm | 460.50 |
| 13.7.1 | 12 mm cement plaster finished with a floating coat of neat cement of mix13.7.1 1:3 (1 cement: 3 fine sand) | Sqm | 491.84 |
| 13.7.2 | 12 mm cement plaster finished with a floating coat of neat cement of mix1:4 (1 cement: 4 fine sand) | Sqm | 436.05 |
| 13.8.1 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix1:3 (1 cement: 3 fine sand) | Sqm | 556.14 |
| 13.8.2 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix1:4 (1 cement: 4 fine sand) | Sqm | 519.25 |
| 13.9.1 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement12 mm cement plaster | Sqm | 491.84 |
| 13.9.2 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement20 mm cement plaster | Sqm | 651.56 |
| 13.16.1 | 6 mm cement plaster of mix1:3 (1 cement: 3 fine sand) | Sqm | 304.29 |
| 13.18 | Neat cement punning | Sqm | 98.23 |
| 13.19.1 | Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cementOrdinary cement finish using ordinary cement | Sqm | 910.11 |
| 13.20 | Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement | Sqm | 858.91 |
| 13.22 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof | Sqm | 85.52 |
| 13.23.1 | Extra for plastering on circular work not exceeding 6 m in radiusIn one coat | Sqm | 46.33 |
| 13.23.2 | Extra for plastering on circular work not exceeding 6 m in radiusIn two coats | Sqm | 70.54 |
| 13.24.1 | Extra for plastering done on moulding, cornices or architraves including neat finish to line and levelIn one coat | Sqm | 682.41 |
| 13.24.2 | Extra for plastering done on moulding, cornices or architraves including neat finish to line and levelIn two coats | Sqm | 1,125.48 |
| 13.25.1 | Extra for plasteringSpherical ceiling | Sqm | 172.93 |
| 13.25.2 | Extra for plasteringGroined ceiling | Sqm | 187.46 |
| 13.25.3 | Extra for plasteringFlewing soffits | Sqm | 114.07 |
| 13.26 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete | Sqm | 282.64 |
| 13.27 | Extra for lining out plaster to imitate stone or concrete blocks walling | Sqm | 109.54 |
| 13.31.1 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3fine sand)Flush / Ruled/ Struck or weathered pointing | Sqm | 246.98 |
| 13.31.2 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3fine sand)Raised and cut pointing | Sqm | 422.93 |
| 13.32.1 | Pointing on tile brick work with cement mortar 1:3 (1 cement: 3 fine sand)Flush/ Ruled/ Struck or weathered pointing | Sqm | 337.80 |
| 13.33.1 | Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand)Flush/ Ruled pointing | Sqm | 361.43 |
| 13.33.2 | Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand)Raised and cut pointing | Sqm | 662.11 |
| 13.34 | Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement: 3 marble dust) | Sqm | 724.88 |
| 13.35.1 | Pointing on stone slab ceiling with cement mortar 1:2 (1 cement: 2 fine sand)Flush/ Ruled pointing | Sqm | 203.98 |
| 13.36 | Extra for pointing on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or part there of | Sqm | 10.48 |
| 13.37.1 | White washing with lime to give an even shadeNew work (three or more coats) | Sqm | 35.28 |
| 13.38 | Satna lime wash on walls with one coat | Sqm | 13.21 |
| 13.39.1 | Colour washing such as green, blue or buff to give an even shadeNew work (two or more coats) with a base coat of white washing with lime | Sqm | 48.11 |
| 13.39.2 | Colour washing such as green, blue or buff to give an even shadeNew work (two or more coats) with a base coat of whiting | Sqm | 47.45 |
| 13.41.1 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and including water thinnable priming coat with cement primer | Sqm | 185.69 |
| 13.42.1 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specificationTwo or more coats on new work | Sqm | 107.13 |
| 13.43.1 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surfaceWater thinnable cement primer | Sqm | 78.62 |
| 13.44.1 | Finishing walls with water proofing cement paint of required shadeNew work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 118.08 |
| 13.45.1 | Finishing walls with textured exterior paint of required shadeNew work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm | Sqm | 312.18 |
| 13.46.1 | Finishing walls with Acrylic Smooth exterior paint of required shadeNew work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | Sqm | 214.80 |
| 13.48.1 | Finishing walls with Deluxe Multi surface paint system for interiors and exteriorsusing Primer as permanufacturers specificationsTwo or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 190.45 |
| 13.48.2 | Finishing walls with Deluxe Multi surface paint system for interiors and exteriorsusing Primer as permanufacturers specificationsPainting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 171.44 |
| 13.48.3 | Finishing walls with Deluxe Multi surface paint system for interiors and exteriorsusing Primer as permanufacturers specificationsPainting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 169.15 |
| 13.51.1 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfacesOne coat | Sqm | 101.10 |
| 13.51.2 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfacesTwo coats | Sqm | 152.03 |
| 13.52.1 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. completeOn steel work | Sqm | 234.84 |
| 13.52.2 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. completeOn concrete work | Sqm | 232.73 |
| 13.53.1 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeNew work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution | Sqm | 172.18 |
| 13.55.1 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work100 mm diametre pipes | Sqm | 74.98 |
| 13.55.2 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work150 mm diametre pipes | Sqm | 120.03 |
| 13.56.1 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work100 mm diametre pipes | Sqm | 79.67 |
| 13.56.2 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work150 mm diametre pipes | Sqm | 129.57 |
| 13.57.1 | Painting with oil type wood preservative of approved brand and manufactureNew work (two or more coats) | Sqm | 66.44 |
| 13.58 | Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant | Sqm | 295.00 |
| 13.59 | Coal tarring two coats on new work using 0.16 Litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively | Sqm | 63.08 |
| 13.60.1 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shadeTwo or more coats on new work | Sqm | 203.92 |
| 13.61.1 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shadeTwo or more coats on new work | Sqm | 168.21 |
| 13.62.1 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeTwo or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | Sqm | 242.97 |
| 13.63.1 | Painting with aluminium paint of approved brand and manufacture to give an even shadeTwo or more coats on new work | Sqm | 148.71 |
| 13.64.1 | Painting with acid proof paint of approved brand and manufacture of required colour to give an even shadeTwo or more coats on new work | Sqm | 160.45 |
| 13.65.1 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shadeTwo or more coats on new work | Sqm | 133.72 |
| 13.66.1 | Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shadeTwo or more coats on new work | Sqm | 178.97 |
| 13.67.1 | Varnishing with varnish of approved brand and manufactureTwo or more coats of glue sizing with copal varnish over an under coat of flatting varnish | Sqm | 251.92 |
| 13.67.2 | Varnishing with varnish of approved brand and manufactureTwo or more coats glue sizing with spar varnish or an under coat of flatting varnish | Sqm | 257.77 |
| 13.68.1 | French spirit polishingTwo or more coats on new works including a coat of wood filler | Sqm | 449.13 |
| 13.69.1 | Polishing on wood work with ready mixed wax polish of approved brand and manufactureNew work | Sqm | 184.17 |
| 13.70 | Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture | Sqm | 89.06 |
| 13.72 | Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement: 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer-incharge (payment for providing grooves shall be made separately) | Sqm | 1,213.53 |
| 13.73.1 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge15 mm wide and 15 mm deep groove | Sqm | 73.81 |
| 13.73.2 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge20 mm wide and 15 mm deep groove | Sqm | 75.30 |
| 13.74 | Extra for washed grit plaster on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof | Sqm | 173.43 |
| 13.75 | Extra for washed stone grit plaster on circular work not exceeding 6 m in radius (in two coats) | Sqm | 126.90 |
| 13.76 | Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer- in-Charge | Sqm | 120.73 |
| 13.77 | Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster | Sqm | 306.58 |
| 13.78 | Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite on walls & ceiling at all floors and locations, finished in smooth line and levelapplied on hacked / uneven background such as bare brick/ block/ RCC work respectively conforming to IS: 2547 (Part - 1 & II) 1976, etc. complete | Sqm | 603.66 |
| 13.80 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete | Sqm | 168.44 |
| 13.81.1 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colourOne coat | Sqm | 63.78 |
| 13.81.2 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colourTwo coats | Sqm | 101.09 |
| 13.82.1 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colourOne coat | Sqm | 88.46 |
| 13.82.2 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colourTwo coats | Sqm | 131.36 |
| 13.83.1 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colourOne coat | Sqm | 91.08 |
| 13.83.2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colourTwo coats | Sqm | 138.17 |
| 13.87.1 | White washing with lime to give an even shadeOld work (two or more coats | Sqm | 20.94 |
| 13.87.2 | White washing with lime to give an even shadeOld work (one or more coats) | Sqm | 12.84 |
| 13.88 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Sqm | 16.65 |
| 13.89 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade | Sqm | 62.47 |
| 13.90.1 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shadeOld work (one or more coats) | Sqm | 62.15 |
| 13.91 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Sqm | 21.53 |
| 13.92.1 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeOld work (one or more coats) | Sqm | 95.00 |
| 13.93.1 | Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture over and including a priming coat of ready mixed zinc chromate yellow primer on new work75 mm diametre pipes | Metre | 56.09 |
| 13.94.1 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work75 mm diametre pipes | Metre | 24.01 |
| 13.94.2 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work100 mm diametre pipes | Metre | 34.93 |
| 13.94.3 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work150 mm diametre pipes | Metre | 50.15 |
| 13.95.1 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work75 mm diametre pipes | Metre | 59.90 |
| 13.95.2 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work100 mm diametre pipes | Metre | 387.66 |
| 13.95.3 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work150 mm diametre pipes | Metre | 126.06 |
| 13.96.1 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work75 mm diametre pipes | Metre | 28.91 |
| 13.96.2 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work100 mm diametre pipes | Metre | 37.19 |
| 13.96.3 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work150 mm diametre pipes | Metre | 53.41 |
| 13.98.1 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shadeOne or more coats on old work | Sqm | 104.66 |
| 13.99.1 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeOne or more coats on old work | Sqm | 109.73 |
| 13.100.1 | Painting with aluminium paint of approved brand and manufacture to give an even shadeOne or more coats on old work | Sqm | 89.61 |
| 13.101.1 | Painting with acid proof paint of approved brand and manufacture of required colour to give an even shadeOne or more coats on old work | Sqm | 105.05 |
| 13.102.1 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shadeOne or more coats on old work | Sqm | 89.38 |
| 13.103.1 | French spirit polishingOne or more coats on old work | Sqm | 226.04 |
| 13.104.1 | Polishing on wood work with ready made wax polish of approved brand and manufactureOld work | Sqm | 93.31 |
| 13.106 | Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade | Sqm | 91.41 |
| 13.107.1 | Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin32 mm dia | Each | 151.05 |
| 13.107.2 | Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin40 mm dia | Each | 151.05 |
| 13.108.1 | Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specificationOne or more coats on old work | Sqm | 57.95 |
| 13.109.1 | Finishing walls with water proofing cement paint of required shadeOld work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat | Sqm | 112.54 |
| 13.109.2 | Finishing walls with water proofing cement paint of required shadeOld work (one or more coats @ 2.20 kg/10 sqm) complete | Sqm | 76.94 |
| 13.110.1 | Finishing walls with textured exterior paint of required shadeOld work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm | Sqm | 239.05 |
| 13.110.2 | Finishing walls with textured exterior paint of required shadeOld work (One or more coats) applied @ 1.82 ltr/10 sqm | Sqm | 147.34 |
| 13.111.1 | Finishing walls with Acrylic Smooth exterior paint of required shadeOld work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | Sqm | 139.39 |
| 13.111.2 | Finishing walls with Acrylic Smooth exterior paint of required shadeOld work (Two or more coat applied @ 0.90ltr/ 10 sqm) | Sqm | 92.28 |
| 13.112.1 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shadeOld work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface | Sqm | 133.53 |
| 13.112.2 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shadeOld work (one or more coats applied @ 0.83 ltr/10 sqm) | Sqm | 90.45 |
| 13.113.1 | Varnishing with varnish of approved brand and manufactureOne or more coats with copal varnish | Sqm | 100.48 |
| 13.113.2 | Varnishing with varnish of approved brand and manufactureOne or more coats with spar varnish | Sqm | 101.91 |
| 13.114 | Melamine polishing on wood work (one or more coat) | Sqm | 171.15 |
| 13.115 | Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work | Sqm | 106.30 |
| 13.116 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below | Sqm | 1,368.66 |
Other chapters in this schedule
- Earth work (40)
- Concrete Work (59)
- Reinforced Cement Concrete (106)
- Masonary Work (50)
- Stone Work (43)
- Cladding Work (49)
- Wood and PVC Work (342)
- Steel Work (53)
- Flooring Work (110)
- Roofing Work (123)
- Repairs to Building (82)
- Dismantling and Demolishing (60)
- Road Work (121)
- Sanitary Installations (210)
- Water Supply (399)
- Drainage (68)
- Pile Work (31)
- Aluminium Work (33)
- Water Proofing (25)
- River and Canal Protection Work (8)
- Canal Lining Works (31)
- Slip Clearance (5)
- Rain Water Harvasting and Tube Wells (37)
- Conservation Of Heritage Building (7)
- Horticulture and Land Scaping (31)
- Structural Glazing Aluminium Composit Panel (5)
- New Technologies & Materials (166)
- Special Items for Ladakh (21)
Pricing finishing work against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works