Skip to main content

Ladakh SOR 2024

Masonary Work rates

50 masonary work items from the Ladakh Public Works (R&B), effective 2024-08-01.

Masonary Work rates in the Ladakh Ladakh Schedule of Rates 2024 run from ₹26.54 to ₹30,463.28. Transcribed from UT of Ladakh, Public Works (R&B) Department — Ladakh Schedule of Rates (LSoR) 2024, Order No.58-LA-PW(R&B) of 2024 dated 24.07.2024, operative from 1 August 2024. Reference only — verify against the official source before pricing a bid.

Download the full schedule (Excel)All 29 chapters

50 items — scroll the table to browse

DescriptionUnit
6.1.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth inCement mortar 1:4 (1 cement: 4 coarse sand)Cum10,116.63
6.1.2Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth inCement mortar 1:6 (1 cement: 6 coarse sand)Cum9,580.64
6.2.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth inCement mortar 1:4 (1 cement: 4 coarse sand)Cum7,605.23
6.2.2Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth inCement Mortar 1:6 (1 cement: 6 coarse sand)Cum7,132.22
6.4.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes inCement mortar 1:4 (1 cement: 4 coarse sand)Cum11,791.21
6.4.2Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes inCement mortar 1:6 (1 cement: 6 coarse sand)Cum11,254.21
6.5Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlExtra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical meansCum299.57
6.6Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlExtra for forming cavity 5 cm to 11.5 cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M.S. ties 300 mm long of 25x3 mm section at not less than 3 ties per sqm as per approved designSqm237.96
6.7Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlProviding half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 Cement: 3 coarse sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10cm / 11.4 cm wide bitumen felt type 3 grade 1Metre389.26
6.8Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlBrick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure above plinth level and upto floor five levelSqm1,102.24
6.9Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlBrick work in plain arches in superstructure above plinth level and upto floor five level including centering and shuttering complete for span up to 6 metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 cement: 3 coarse sand)Cum18,993.62
6.10Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlBrick work in gauged arches in superstructure above plinth level and upto floor five level in cement mortar 1:3 (1 cement: 3 coarse sand) including centering and shuttering complete, for span up to 6 Metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5Cum22,764.96
6.11Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlExtra for additional cost of centering for arches exceeding 6m span including all shuttering, bolting, wedging and removal (Area of the soffit to be measured)Sqm1,280.74
6.12.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth inCement mortar 1:3 (1 cement: 3 coarse sand)Sqm1,269.68
6.12.2Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth inCement mortar 1:4 (1 cement: 4 coarse sand)Sqm1,209.68
6.13.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V levelCement mortar 1:3 (1 cement:3 coarse sand)Sqm1,453.30
6.13.2Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V levelCement mortar 1:4 (1 cement:4 coarse sand)Sqm1,393.19
6.14Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlExtra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical meansSqm26.54
6.15Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlExtra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonrySqm128.27
6.16.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in foundation and plinth inCement mortar 1:4 (1 cement: 4 coarse sand)Cum18,367.00
6.16.2Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in foundation and plinth inCement mortar 1:6 (1 cement: 6 coarse sand)Cum18,548.65
6.17Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlTile brick masonry with common burnt clay machine moulded tile bricks of class designation 12.5 conforming to IS: 2690 (Part I) in foundation and plinth in cement mortar 1:6 (1 cement: 6 coarse sand)Cum10,856.13
6.18Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlTile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in superstructure above plinth level up to floor V level in cement mortar 1:6 (1 cement: 6 coarse sand)Cum19,300.74
6.20Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlTile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in plain arch work in superstructure above plinth and upto floor five level in cement mortar 1:4 (1 cement: 4 coarse sand) including centering and shuttering completeCum26,737.39
6.21Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlTile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in gauged arch work in superstructure above plinth and upto floor five level in cement mortar 1:4 (1 cement: 4 coarse sand) including centering and shuttering completeCum30,463.28
6.22Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlTile brick masonry work 5 cm thick with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure above plinth and upto floor five levelSqm1,261.94
6.23Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlHoney-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement: 4 coarse sand)Sqm894.81
6.24Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlExtra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete. NOTE:- The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work under sub - soil water with the quantity of brick work in cum. executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m, 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignoredMetre914.29
6.25Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlExtra for laying brick work in or under foul positionCum387.84
6.26.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand)From ground level upto plinth levelCum9,778.60
6.27.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with common burnt clay modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand)From ground level upto plinth levelCum7,185.75
6.28.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand)From ground level upto plinth levelCum9,561.27
6.29.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with common burnt clay machine moulded F.P.S. (non modular) bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand)From ground level upto plinth levelCum7,196.03
6.30.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with common burnt clay machine moulded perforated F.P.S. (non modular) bricks of class designation 12.5 conforming IS: 2222 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand)From ground level upto plinth levelCum6,837.48
6.31.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with common burnt clay machine moulded perforated modular bricks of class designation 12.5 conforming to IS: 2222 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand)From ground level upto plinth levelCum6,629.24
6.32.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level inCement mortar 1:4 (1 cement: 4 coarse sand)Cum12,143.70
6.32.2Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level inCement mortar 1:6 (1 cement: 6 coarse sand)Cum11,607.71
6.34.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level inCement mortar 1:4 (1 cement: 4 coarse sand)Cum5,821.57
6.34.2Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level inCement mortar 1:6 (1 cement: 6 Coarse sand)Cum5,349.57
6.35.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with modular calcium silicate bricks machine moulded conforming to IS:4139, class designation 10 average compressive strength in super structure above plinth level up to floor V level inCement mortar 1:4 (1 cement: 4 coarse sand)Cum9,583.82
6.35.2Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with modular calcium silicate bricks machine moulded conforming to IS:4139, class designation 10 average compressive strength in super structure above plinth level up to floor V level inCement mortar 1:6 (1 cement: 6 Coarse sand)Cum9,111.82
6.36.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Brick work with modular extruded brunt fly ash clay sewer bricks (Conforming to IS: 4885) in cement mortar 1:4 (1 cement: 4 coarse sand) in foundation and plinthCement Mortar 1:4 (1 cement: 4 coarse sand)Cum7,465.85
6.37Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlBrick work with modular extruded brunt fly ash clay sewer bricks (conforming to IS: 4885) in arches in foundation and plinth in cement mortar 1:3 (1 cement: 3 fine sand)Cum15,336.41
6.38Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlProviding and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement: 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry workCum27,438.90
6.40Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlProviding and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor V level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm3Sqm1,004.45
6.41Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlExtra for Gypsum panel Partitions in superstructure above floor V level for every four floors or part thereofSqm146.45
6.44Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlBrick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement: 4 fine sand)Metre83.90
6.45.1Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS:12894, in super structure above plinth and upto floor V levelCement mortar 1: 3 (1 cement: 3 coarse sand)Sqm799.22
6.45.2Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml — Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS:12894, in super structure above plinth and upto floor V levelCement mortar 1: 4 (1 cement: 4 coarse sand)Sqm739.12
6.47Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 mlProviding and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately)Cum25,277.27

Other chapters in this schedule

Pricing masonary work against a live tender

Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works