Skip to main content

Ladakh SOR 2024

Steel Work rates

53 steel work items from the Ladakh Public Works (R&B), effective 2024-08-01.

Steel Work rates in the Ladakh Ladakh Schedule of Rates 2024 run from ₹18.09 to ₹12,246.61. Transcribed from UT of Ladakh, Public Works (R&B) Department — Ladakh Schedule of Rates (LSoR) 2024, Order No.58-LA-PW(R&B) of 2024 dated 24.07.2024, operative from 1 August 2024. Reference only — verify against the official source before pricing a bid.

Download the full schedule (Excel)All 29 chapters

53 items — scroll the table to browse

DescriptionUnit
10.1Structural steel work in single section, fixed with or without connecting plate, including cutting, hoistingKG141.67
10.2Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, includingKG185.73
10.3Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and bracedSqm12,246.61
10.4Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x7Sqm8,186.05
10.5.1Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.SUsing M.S. angels 40x40x6 mm for diagonal bracesSqm6,363.44
10.5.2Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.SUsing flats 30x6mm for diagonal braces and central cross pieceSqm6,221.24
10.6.1Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked80x1.25 mm M.S. laths with 1.25 mm thick top coverSqm4,142.27
10.6.2Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked80x1.20 mm M.S. laths with 1.20 mm thick top coverSqm3,955.05
10.6.3Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked80x0.90 mm M.S. laths with 0.90 mm thick top coverSqm3,386.99
10.7Providing and fixing ball bearing for rolling shuttersEach664.37
10.8.1Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 10.00 sqm and upto 16.80 sqm in the areaEach1,543.82
10.8.2Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 16.80 sqm in areaSqm1,543.82
10.9Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as perSqm790.20
10.10.1Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glassFixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6KG78.99
10.10.2Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glassFixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)KG41.54
10.11.1Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/topFixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6KG230.52
10.11.2Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/topFixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)KG152.60
10.12Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with screws instead of glazing clips and metal sash putty, in steel doors, windows, ventilators and composite unitsMetre73.33
10.13.1Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, jointsFixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6KG170.91
10.13.2Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, jointsFixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)KG164.49
10.14.1.1Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial — Profile BFixing with adjustable lugs with split end tail to each jambMetre507.36
10.14.1.2Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial — Profile BFixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)Metre529.70
10.14.2.1Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial — Profile CFixing with adjustable lugs with split end tail to each jambMetre576.65
10.14.2.2Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial — Profile CFixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)Metre592.30
10.14.3.1Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial — Profile EFixing with adjustable lugs with split end tail to each jambMetre623.60
10.14.3.2Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial — Profile EFixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)Metre639.25
10.15.1Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6KG189.22
10.15.2Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)KG173.47
10.16.1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., includingHot finished welded type tubesKG203.11
10.16.2Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., includingHot finished seamless type tubesKG218.05
10.16.3Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., includingElectric resistance or induction butt welded tubesKG180.69
10.17Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends inEach227.20
10.18Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal diaEach239.96
10.19Providing and fixing mild steel round holding down bolts with nuts and washer plates completeKG118.89
10.20Providing and fixing bolts including nuts and washers completeKG155.01
10.21Providing and fixing M.S. rivets of sizes in positionKG321.41
10.22Welding by gas or electric plant including transportation of plant at site etc. completeCm18.09
10.25.1Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position andIn stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, allKG172.63
10.25.2Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position andIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksKG212.69
10.26.1Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railingM.S. tubeKG210.64
10.26.2Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railingE.R.W. tubesKG196.87
10.26.3Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railingG.I. pipesKG234.29
10.27.1Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia10 x 60 mmEach137.95
10.27.2Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia10 x 80 mmEach141.37
10.27.3Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia10 x 120 mmEach177.40
10.27.4Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia10 x 140 mmEach196.89
10.27.5Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia10 x 160 mmEach240.61
10.28Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etcKG906.01
10.29.1Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mmGalvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sidesSqm897.74
10.29.2Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mmStainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sidesSqm1,208.89
10.30.1Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows4.0 mm thick glass panesSqm1,655.59
10.30.2Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows5.5 mm thick glass panesSqm1,923.19
10.31Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections ofKG159.76

Other chapters in this schedule

Pricing steel work against a live tender

Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works