Rajasthan SOR 2025-26
Road Works: Additional Items (New) rates
307 road works: additional items (new) items from the Rajasthan PWD (Roads & Bridges), effective 2025-04-01.
Road Works: Additional Items (New) rates in the Rajasthan Basic Schedule of Rates 2025-26 run from ₹3.00 to ₹1,09,947.00. Transcribed from Rajasthan PWD — Unified Basic Schedule of Rates for year 2025-26, Road & Bridge Works (other than NH & PMGSY), Chief Engineer (Roads), P.W.D. Rajasthan, Jaipur; effective from 01-04-2025. Reference only — verify against the official source before pricing a bid.
/
307 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| R-17.1 | Construction of panel concrete pavement M-40 grade for Ultra Thin white Topping (Thickness equal to or less than 100 mm) Construction of short paneled un reinforced, plain cement concrete pavement (Ultra Thin white Topping as per IRC : SP: 76-2015) :M-40 grade concrete over a prepared sub base or over bituminous surface (Existing bituminous surface prepared if necessary either by milling or leveling course to be done with BM / DBM / DLC to correct surface profile and to be paid separately) with Ordinary Portland Cement 53 grade confirming to IS:12269, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a fully automatic batching plant and transported to site in transit mixer for having continous agitated mixer, manufactured as per approved mix design including pumping of R.M.C. from transit mixer to site of laying, with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge laid with a Fixed Form Paver (laying and fixing of 150 micron thick polythene film) and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawing and specification as per IRC SP : 76 - 2015. should have minimum flexural strengthen of 4.5 MPa, Each Panel (0.50m x 0.50m) | Cum | 6,600.00 |
| R-17.2 | Construction of panel concrete pavement M-40 grade for Thin White Topping (Thickness greater than I00 mm and less than 200 mm) Construction of short paneled un reinforced, plain cement concrete pavement (Thin white Topping as per IRC : SP: 76-2015) :M-40 grade concrete over a prepared sub base or over bituminous surface (Existing bituminous surface prepared if necessary either by milling or leveling course to be done with BM / DBM / DLC to correct surface profile and to be paid separately) with Ordinary Portland Cement 53 grade confirming to IS:12269, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a fully automatic batching plant and transported to site in transit mixer for having continous agitated mixer, manufactured as per approved mix design including pumping of R.M.C. from transit mixer to site of laying, with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge laid with a Fixed Form Paver (laying and fixing of 150 micron thick polythene film) and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawing and specification as per IRC SP : 76 - 2015. should have minimum flexural strengthen of 4.5 MPa, Each Panel (1.00m x 1.00m) | Cum | 6,500.00 |
| R-17.3 | Recycling pavement by cold milling of existing bituminous layers, planning the surface after cold milling, reclaiming excavated material to the extent of 30 percent of the required quantity, hauling and stock pilling the reclaimed material near the central recycling plant after carrying out necessary checks and evaluation, adding fresh material including rejuvenators as required, mixing in a hot mix plant, transporting and laying at site and compacting to the required grade, level and thickness, all as specified in MoRTH Specifications Clause 519 | Cum | 6,566.00 |
| R-17.4 | Milling of distress bitumenous layer upto 70mm depth in a single pass with suitable milling machine (capable of milling @ 200&300 sqm of area per hr) fitted with loading conveyer of loading the filled material directly on the trucks i/c hauling and stock pilling the reclaiming to bring to required specification to reuse with the approval of engineer - in - charge for safe disposal; with all leads and lifts complete in all respect as directly by Engineer - in- charge. *Note : The unutilized quality of reclaimed bituminous mix material shall be recovered | Sqm | 26.00 |
| R-17.5 | Supply & Fixing of Chevron sign of size 75x60 cm made out of aluminum sheet 2 mm thick with fixing provision on M.S. angle iron post 50x50x6 mm 3 M long screwed with stainless steel nut bolts of 8mm dia, plate is covered by high intensity grade yellow retro-reflective sheeting and black screen printed arrow on Retro Reflective Sheet, complete in all respect. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom | Each | 5,832.00 |
| R-17.6 | Provision of reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-20 grade concrete with HYSD reinforcement conforming to IRC: 21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MoRTH Circular No. RW/ NH- 33022/ 1/ 94-DO III dated 24th June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified as per MoRTH specification Cl. 811.2 | Rmt | 4,452.00 |
| R-17.7 | Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ ground level, fixed on CRC rolled channel vertical post, 150 x 75 x 5 mm spaced 2 mm centre to centre, 1.8 m high, 1.1 m below ground / road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS: 1367 and IS: 1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per MoRTH specification Clause 811.3 | Rmt | 3,105.00 |
| R-17.8 | Providing and erecting a "Thrie" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 Cm above road/ ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre- to- centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS: 1367 and IS: 1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long complete as per Clause 811.3 | Rmt | 4,839.00 |
| R-17.9.1 | Providing and laying Precast reinforced cement concrete Box culvert section of M-40 grade designed for 'AA' class loading as per IRC specifications including to effect of impact, EQ etc. complete on firm base of 200mm thick lean concrete of M-10 grade with aggregate of size 40mm nominal of following internal size the work includes required safety measures cost of design of RCC Precast Box and its proof checking from IIT / NIT / Government Engineer College complete in all respect as per specificationsSize 2.00 M x 2.00 M | Rmt | 26,328.00 |
| R-17.9.2 | Providing and laying Precast reinforced cement concrete Box culvert section of M-40 grade designed for 'AA' class loading as per IRC specifications including to effect of impact, EQ etc. complete on firm base of 200mm thick lean concrete of M-10 grade with aggregate of size 40mm nominal of following internal size the work includes required safety measures cost of design of RCC Precast Box and its proof checking from IIT / NIT / Government Engineer College complete in all respect as per specificationsSize 1.50 M x 1.50 M | Rmt | 23,061.00 |
| R-17.9.3 | Providing and laying Precast reinforced cement concrete Box culvert section of M-40 grade designed for 'AA' class loading as per IRC specifications including to effect of impact, EQ etc. complete on firm base of 200mm thick lean concrete of M-10 grade with aggregate of size 40mm nominal of following internal size the work includes required safety measures cost of design of RCC Precast Box and its proof checking from IIT / NIT / Government Engineer College complete in all respect as per specificationsSize 1.25 M x 1.25 M | Rmt | 15,911.00 |
| R-17.9.4 | Providing and laying Precast reinforced cement concrete Box culvert section of M-40 grade designed for 'AA' class loading as per IRC specifications including to effect of impact, EQ etc. complete on firm base of 200mm thick lean concrete of M-10 grade with aggregate of size 40mm nominal of following internal size the work includes required safety measures cost of design of RCC Precast Box and its proof checking from IIT / NIT / Government Engineer College complete in all respect as per specificationsSize 1.00 M x 1.00 M | Rmt | 12,089.00 |
| R-17.9.5 | Providing and laying Precast reinforced cement concrete Box culvert section of M-40 grade designed for 'AA' class loading as per IRC specifications including to effect of impact, EQ etc. complete on firm base of 200mm thick lean concrete of M-10 grade with aggregate of size 40mm nominal of following internal size the work includes required safety measures cost of design of RCC Precast Box and its proof checking from IIT / NIT / Government Engineer College complete in all respect as per specificationsSize 0.75 M x 0.75 M | Rmt | 8,987.00 |
| R-17.9.6 | Providing and laying Precast reinforced cement concrete Box culvert section of M-40 grade designed for 'AA' class loading as per IRC specifications including to effect of impact, EQ etc. complete on firm base of 200mm thick lean concrete of M-10 grade with aggregate of size 40mm nominal of following internal size the work includes required safety measures cost of design of RCC Precast Box and its proof checking from IIT / NIT / Government Engineer College complete in all respect as per specificationsSize 0.60 M x 0.60 M | Rmt | 8,072.00 |
| R-17.10 | Supply of readymade cold bituminous mixture for pothole patching in potholes in accordance with IRC:116-2014 specifications with IRC: 116-2014 spccifications with 5.6% MC- 800 Cut back Bitumen and suitable anti stripping agent with all lead and lift in 50 kg plastic lined sturdy bags complete in all respect as per direction of engincer-in- charge including all transportation, stacking & taxes etc | KG | 14.50 |
| R-17.11 | Placing and compacting readymade cold bituminous mixture in potholes duly prepared in accordance with IRC:116-2014 with Specifications with all lead and lift for placement at site complete in all respect as per Direction of Engineer-in-charge including all taxes etc | KG | 3.00 |
| R-17.12 | Providing and erecting a Road Restraint System-Single Roller System Barrier. Single Roller System H-1 & H-2 comprising of post of hot dip galvanized steel 139.8 mm diameter (1.-2200 and 1.-720) thickness 4.5 mm spaced with interval of 1 meter installed into hardened road. Safety frame rail from sheet of 3.2 mm thick are fixed to main posts, shock absorbing rollers 345mm diameter and 480mm height made of polypropylene - EVA,post caps, loker, pipes and connection material. Distance between main post to main post shall be 1000 mm. Distance between main post to short post shall be 500 mm (Centre to Centre of Roller shall be 500 mm) and the height of upper edge rail is 960 mm. All steel parts (frame S235JR equivalent SS400) and post S235JR shall be hot dip galvanized against corrosion. The system shall be installed after road safety survey, Liasoning for reports Pre & Post assesement & Installation report in accordance with the design and drawing and assembly instructions etc. complete including GST | Rmt | 89,661.00 |
| R-17.13 | Supplying, fitting and placing of GFRP(Glass fiber Reinforced Polymer) bars conforming to IRC 137:2022 and IS 18256:2023 for non- Structure applications such as Crash Barriers, Concrete drains, Concrete pavements. Approach slabs.etc. as per drawing & technical specification. (Only GFRB Bars manufactured using Vinyl Ester systems and Glass fibers classified as E-CR or R that meet the requirements of IS 18256:2023 shall be used) including GST | KG | 253.00 |
| R-17.18.5 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time600 X 1000 | Rmt | 22,244.00 |
| R-17.18.6 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time900 X 1000 | Rmt | 31,003.00 |
| R-17.18.7 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time1000 X 1000 | Rmt | 32,230.00 |
| R-17.18.8 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time1200 X 1000 | Rmt | 36,425.00 |
| R-17.18.9 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time1000 X 600 | Rmt | 25,584.00 |
| R-17.18.10 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time1000 X 900 | Rmt | 31,033.00 |
| R-17.18.11 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time1000 X1200 | Rmt | 36,488.00 |
| R-17.18.12 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time800 X 1400 | Rmt | 36,488.00 |
| R-17.18.13 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time900 X 1400 | Rmt | 37,814.00 |
| R-17.18.14 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time1000 X 1400 | Rmt | 39,255.00 |
| R-17.18.15 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time1100 X 1400 | Rmt | 40,634.00 |
| R-17.18.16 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time1200 X 1400 | Rmt | 41,970.00 |
| R-17.18.17 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time1300 X 1400 | Rmt | 46,712.00 |
| R-17.18.19 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time1500 X 1400 | Rmt | 49,907.00 |
| R-17.18.20 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time2000 X 1200 | Rmt | 69,237.00 |
| R-17.18.22 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time2000 X 1800 | Rmt | 76,318.00 |
| R-17.18.23 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time2000 X 2000 | Rmt | 77,452.00 |
| R-17.18.24 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time2500 X 1500 | Rmt | 94,173.00 |
| R-17.18.25 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time2500 X 1800 | Rmt | 1,00,932.00 |
| R-17.18.26 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time2500 X 2000 | Rmt | 1,03,802.00 |
| R-17.18.27 | Precast Box Culvert - Providing and Fixing in position precast cement concrete Box - Culvert as per design and shape using coarse aggregate and fine aggregate derived from natural resources, ordinary portland / admixture as per design mix IS 456-2000 and standard like Indian standard international standard viz Japanese Industrial Standard (JIS) / Providing and Fixing in position precast reinforced cement concrete Box - Culvert or Cable Crossing Boxes as per design and shape, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand flag cement, admixture* in recommended proportions as per IS: 456- 2000 and standard like Indian standard international standards viz. Japanese Induslrial Standards (JIS)/ US standard/EU standard having of strength not less than M-50. using Thermo- Mechanically created bars (TMT/TMX) FE SOOD or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 32.5 zones with earth cushion 0.20 m to 3.00 m for heavy vehicle movement. Precast reinforced cement concrete drains using, service Crossing / stormwater etc. Rale includes aII cost of material, labor charges at the plant, cost of reinforcement formwork and lifting accessories, and transportation up Io work at fhe site. Rate excludes unloading lhe material at site, bids, and lift. All work up to plinth level: making necessary holes of required sizes for carrying lhroug h service lines etc., providing steel hooks for lifting, etc..the work exciting as per the direction of Engineer in-charge. Nole: Rate shall also include technical assistance for the installation of producls at one time2500 X 2500 | Rmt | 1,09,947.00 |
| R-17.20.1 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (1000 X 1000 X 1000) Wall Width up to 250mm | Rmt | 30,851.00 |
| R-17.20.2 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (1000 X 1000 X 1200) Wall Width up to 250mm | Rmt | 35,300.00 |
| R-17.20.3 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (1000 X 1000 X 1400) Wall Width up to 250mm | Rmt | 41,754.00 |
| R-17.20.4 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (1000 X 1000 X 1600) Wall Width up to 250mm | Rmt | 46,401.00 |
| R-17.20.5 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (1000 X 1000 X 1800) Wall Width Up to 250mm | Rmt | 50,407.00 |
| R-17.20.6 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (1000 x 1000 x 2000) Wall Width up to 250mm | Rmt | 53,731.00 |
| R-17.20.7 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (1000 X 1000 X 800) Wall Width up to 250mm | Rmt | 24,202.00 |
| R-17.20.8 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (600 X 600 X 1000) Wall Width up to 140mm | Rmt | 15,157.00 |
| R-17.20.9 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (600 X 600 X 1200) Wall Width up to 140mm | Rmt | 17,470.00 |
| R-17.20.10 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (600 X 600 X 1400) Wall Width up to 140mm | Rmt | 19,390.00 |
| R-17.20.11 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (600 X 600 X 1600) Wall Width up to 140mm | Rmt | 20,815.00 |
| R-17.20.12 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (600 X 600 X 600) Wall Width up to 140mm | Rmt | 9,148.00 |
| R-17.20.13 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (600 X 600 X 800) Wall Width up to 140mm | Rmt | 12,349.00 |
| R-17.20.14 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (800 X 800 X 1000) Wall Width up to 170mm | Rmt | 14,767.00 |
| R-17.20.15 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (800 X 800 X 1200) Wall Width up to 170mm | Rmt | 20,509.00 |
| R-17.20.16 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (800 X 800 X 1400) Wall Width up to 170mm | Rmt | 25,482.00 |
| R-17.20.17 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (800 X 800 X 1600) Wall Width up to 170mm | Rmt | 27,960.00 |
| R-17.20.18 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (800 X 800 X 1800) Wall Width up to 170mm | Rmt | 30,066.00 |
| R-17.20.19 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (800 X 800 X 2000) Wall Width Up To 170mm | Rmt | 31,698.00 |
| R-17.20.21 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber - (800 X 800 X 800) Wall Width Up to 170mm | Rmt | 15,322.00 |
| R-17.20.22 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber 1000 Cover - (1144 X 1144 X 150) | Rmt | 7,455.00 |
| R-17.20.24 | Providing and fixing factory-made precast RCC Chambers and covers, having of strength not less than M-50, using Thermo- Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement, As per standard size reinforced, all as per direction of Engineer-in- chargeChamber 600 Cover (122 X 2) (471 X 120 X 944) | Rmt | 2,602.00 |
| R-17.21.1.1 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-900 Precast) (H1:995)FT Flume Drain (600 X 900 X 2000) | Rmt | 8,267.00 |
| R-17.21.1.2 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-900 Precast) (H1:995)FT Flume Drain (700 X 900 X 2000) | Rmt | 8,706.00 |
| R-17.21.1.3 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-900 Precast) (H1:995)FT Flume Drain (800 X 900 X 2000) | Rmt | 9,136.00 |
| R-17.21.1.4 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-900 Precast) (H1:995)FT Flume Drain (900 x 900 X 2000) | Rmt | 9,566.00 |
| R-17.21.1.5 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-900 Precast) (H1:995)FT Flume Drain (1000 X 900 X 2000) | Rmt | 10,005.00 |
| R-17.21.1.6 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-900 Precast) (H1:995)FT Flume Drain (1100 X 900 X 2000) | Rmt | 10,425.00 |
| R-17.21.1.7 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-900 Precast) (H1:995)FT Flume Drain (1200 X 900 X 2000) | Rmt | 10,864.00 |
| R-17.21.1.8 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-900 Precast) (H1:995)FT Flume Drain (1300 X 900 X 2000) | Rmt | 11,285.00 |
| R-17.21.1.9 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-900 Precast) (H1:995)FT Flume Drain (1400 X 900 X 2000) | Rmt | 11,715.00 |
| R-17.21.1.10 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-900 Precast) (H1:995)FT Flume Drain (1500 X 900 X 2000) | Rmt | 12,145.00 |
| R-17.21.1.11 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-900 Precast) (H1:995)FT Flume Drain (1600 X 900 X 2000) | Rmt | 12,565.00 |
| R-17.21.1.12 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-900 Precast) (H1:995)FT Flume Drain (1700 X 900 X 2000) | Rmt | 12,986.00 |
| R-17.21.1.13 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-900 Precast) (H1:995)FT Flume Drain (1800 X 900 X 2000) | Rmt | 13,425.00 |
| R-17.21.2.1 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1000 Precast) Wall Width 90mm (H1: 1105)FT Flume Drain (800 X 1000 X 2000) | Rmt | 8,871.00 |
| R-17.21.2.2 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1000 Precast) Wall Width 90mm (H1: 1105)FT Flume Drain (900 X 1000 X 2000) | Rmt | 9,346.00 |
| R-17.21.2.3 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1000 Precast) Wall Width 90mm (H1: 1105)FT Flume Drain (1000 X 1000 X 2000) | Rmt | 9,813.00 |
| R-17.21.2.4 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1000 Precast) Wall Width 90mm (H1: 1105)FT Flume Drain (1100 X 1000 X 2000) | Rmt | 10,288.00 |
| R-17.21.2.5 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1000 Precast) Wall Width 90mm (H1: 1105)FT Flume Drain (1200 X 1000 X 2000) | Rmt | 10,755.00 |
| R-17.21.2.6 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1000 Precast) Wall Width 90mm (H1: 1105)FT Flume Drain (1300 x 1000 X 2000) | Rmt | 11,230.00 |
| R-17.21.2.7 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1000 Precast) Wall Width 90mm (H1: 1105)FT Flume Drain (1400 x 1000 X 2000) | Rmt | 11,696.00 |
| R-17.21.2.8 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1000 Precast) Wall Width 90mm (H1: 1105)FT Flume Drain (1500 x 1000 X 2000) | Rmt | 12,172.00 |
| R-17.21.2.9 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1000 Precast) Wall Width 90mm (H1: 1105)FT Flume Drain (1600 x 1000 X 2000) | Rmt | 12,648.00 |
| R-17.21.2.10 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1000 Precast) Wall Width 90mm (H1: 1105)FT Flume Drain (1700 x 1000 X 2000) | Rmt | 13,123.00 |
| R-17.21.2.11 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1000 Precast) Wall Width 90mm (H1: 1105)FT Flume Drain (1800 x 1000 X 2000) | Rmt | 13,589.00 |
| R-17.21.2.12 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1000 Precast) Wall Width 90mm (H1: 1105)FT Flume Drain (1900 x 1000 X 2000) | Rmt | 14,065.00 |
| R-17.21.2.13 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1000 Precast) Wall Width 90mm (H1: 1105)FT Flume Drain (2000 x 1000 X 2000) | Rmt | 14,403.00 |
| R-17.21.3.1 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1200 Precast) Wall Width 90mm (H1: 1310)FT Flume Drain (800 x 1200 X 2000) | Rmt | 11,203.00 |
| R-17.21.3.2 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1200 Precast) Wall Width 90mm (H1: 1310)FT Flume Drain (900 x 1200 X 2000) | Rmt | 11,696.00 |
| R-17.21.3.3 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1200 Precast) Wall Width 90mm (H1: 1310)FT Flume Drain (1000 x 1200 X 2000) | Rmt | 12,172.00 |
| R-17.21.3.4 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1200 Precast) Wall Width 90mm (H1: 1310)FT Flume Drain (1100 x 1200 X 2000) | Rmt | 12,693.00 |
| R-17.21.3.5 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1200 Precast) Wall Width 90mm (H1: 1310)FT Flume Drain (1200 x 1200 X 2000) | Rmt | 13,196.00 |
| R-17.21.3.6 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1200 Precast) Wall Width 90mm (H1: 1310)FT Flume Drain (1300 x 1200 X 2000) | Rmt | 13,699.00 |
| R-17.21.3.7 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1200 Precast) Wall Width 90mm (H1: 1310)FT Flume Drain (1400 x 1200 X 2000) | Rmt | 14,056.00 |
| R-17.21.3.8 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1200 Precast) Wall Width 90mm (H1: 1310)FT Flume Drain (1500 x 1200 X 2000) | Rmt | 14,559.00 |
| R-17.21.3.9 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1200 Precast) Wall Width 90mm (H1: 1310)FT Flume Drain (1600 x 1200 X 2000) | Rmt | 15,044.00 |
| R-17.21.3.10 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1200 Precast) Wall Width 90mm (H1: 1310)FT Flume Drain (1700 x 1200 X 2000) | Rmt | 15,537.00 |
| R-17.21.3.11 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1200 Precast) Wall Width 90mm (H1: 1310)FT Flume Drain (1800 x 1200 X 2000) | Rmt | 16,031.00 |
| R-17.21.3.12 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1200 Precast) Wall Width 90mm (H1: 1310)FT Flume Drain (1900 x 1200 X 2000) | Rmt | 16,534.00 |
| R-17.21.3.13 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1200 Precast) Wall Width 90mm (H1: 1310)FT Flume Drain (2000 x 1200 X 2000) | Rmt | 17,010.00 |
| R-17.21.4.1 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1300 Precast) Wall Width 100mm (H1: 1420)FT Flume Drain (800 X 1300 X 2000) | Rmt | 13,882.00 |
| R-17.21.4.2 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1300 Precast) Wall Width 100mm (H1: 1420)FT Flume Drain (900 X 1300 x 2000) | Rmt | 14,284.00 |
| R-17.21.4.3 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1300 Precast) Wall Width 100mm (H1: 1420)FT Flume Drain (1000 X 1300 X 2000) | Rmt | 14,824.00 |
| R-17.21.4.4 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1300 Precast) Wall Width 100mm (H1: 1420)FT Flume Drain (1100 X 1300 X 2000) | Rmt | 15,364.00 |
| R-17.21.4.5 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1300 Precast) Wall Width 100mm (H1: 1420)FT Flume Drain (1200 x 1300 X 2000) | Rmt | 15,894.00 |
| R-17.21.4.6 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1300 Precast) Wall Width 100mm (H1: 1420)FT Flume Drain (1300 x 1300 X 2000) | Rmt | 16,434.00 |
| R-17.21.4.7 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1300 Precast) Wall Width 100mm (H1: 1420)FT Flume Drain (1400 x 1300 X 2000) | Rmt | 16,964.00 |
| R-17.21.4.8 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1300 Precast) Wall Width 100mm (H1: 1420)FT Flume Drain (1500 x 1300 X 2000) | Rmt | 17,513.00 |
| R-17.21.4.9 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1300 Precast) Wall Width 100mm (H1: 1420)FT Flume Drain (1600 x 1300 X 2000) | Rmt | 18,052.00 |
| R-17.21.4.10 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1300 Precast) Wall Width 100mm (H1: 1420)FT Flume Drain (1700 x 1300 X 2000) | Rmt | 18,583.00 |
| R-17.21.4.11 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1300 Precast) Wall Width 100mm (H1: 1420)FT Flume Drain (1800 x 1300 X 2000) | Rmt | 19,122.00 |
| R-17.21.4.12 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1300 Precast) Wall Width 100mm (H1: 1420)FT Flume Drain (1900 x 1300 X 2000) | Rmt | 19,653.00 |
| R-17.21.4.13 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1300 Precast) Wall Width 100mm (H1: 1420)FT Flume Drain (2000 x 1300 X 2000) | Rmt | 20,192.00 |
| R-17.21.5.1 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1400 Precast) Wall Width 100mm (H1: 1530)FT Flume Drain (800 x 1400 X 2000) | Rmt | 15,364.00 |
| R-17.21.5.2 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1400 Precast) Wall Width 100mm (H1: 1530)FT Flume Drain (900 x 1400 X 2000) | Rmt | 15,958.00 |
| R-17.21.5.3 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1400 Precast) Wall Width 100mm (H1: 1530)FT Flume Drain (1000 x 1400 X 2000) | Rmt | 16,534.00 |
| R-17.21.5.4 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1400 Precast) Wall Width 100mm (H1: 1530)FT Flume Drain (1100 x 1400 X 2000) | Rmt | 17,129.00 |
| R-17.21.5.5 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1400 Precast) Wall Width 100mm (H1: 1530)FT Flume Drain (1200 x 1400 X 2000) | Rmt | 17,705.00 |
| R-17.21.5.6 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1400 Precast) Wall Width 100mm (H1: 1530)FT Flume Drain (1300 x 1400 X 2000) | Rmt | 18,290.00 |
| R-17.21.5.7 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1400 Precast) Wall Width 100mm (H1: 1530)FT Flume Drain (1400 x 1400 X 2000) | Rmt | 18,866.00 |
| R-17.21.5.8 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1400 Precast) Wall Width 100mm (H1: 1530)FT Flume Drain (1500 x 1400 X 2000) | Rmt | 19,451.00 |
| R-17.21.5.9 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1400 Precast) Wall Width 100mm (H1: 1530)FT Flume Drain (1600 x 1400 X 2000) | Rmt | 20,037.00 |
| R-17.21.5.10 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1400 Precast) Wall Width 100mm (H1: 1530)FT Flume Drain (1700 x 1400 X 2000) | Rmt | 20,613.00 |
| R-17.21.5.11 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1400 Precast) Wall Width 100mm (H1: 1530)FT Flume Drain (1800 x 1400 X 2000) | Rmt | 21,198.00 |
| R-17.21.5.12 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1400 Precast) Wall Width 100mm (H1: 1530)FT Flume Drain (1900 x 1400 X 2000) | Rmt | 21,783.00 |
| R-17.21.5.13 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1400 Precast) Wall Width 100mm (H1: 1530)FT Flume Drain (2000 x 1400 X 2000) | Rmt | 22,360.00 |
| R-17.21.6.1 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1500 Precast) Wall Width 100mm (H1: 1640)FT Flume Drain (800 X 1500 X 2000) | Rmt | 16,717.00 |
| R-17.21.6.2 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1500 Precast) Wall Width 100mm (H1: 1640)FT Flume Drain (900 X 1500 X 2000) | Rmt | 17,339.00 |
| R-17.21.6.3 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1500 Precast) Wall Width 100mm (H1: 1640)FT Flume Drain (1000 x 1500 X 2000) | Rmt | 17,970.00 |
| R-17.21.6.4 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1500 Precast) Wall Width 100mm (H1: 1640)FT Flume Drain (1100 x 1500 X 2000) | Rmt | 18,592.00 |
| R-17.21.6.5 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1500 Precast) Wall Width 100mm (H1: 1640)FT Flume Drain (1200 x 1500 X 2000) | Rmt | 19,214.00 |
| R-17.21.6.6 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1500 Precast) Wall Width 100mm (H1: 1640)FT Flume Drain (1300 x 1500 X 2000) | Rmt | 19,845.00 |
| R-17.21.6.7 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1500 Precast) Wall Width 100mm (H1: 1640)FT Flume Drain (1400 x 1500 X 2000) | Rmt | 20,467.00 |
| R-17.21.6.8 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1500 Precast) Wall Width 100mm (H1: 1640)FT Flume Drain (1500 x 1500 X 2000) | Rmt | 21,088.00 |
| R-17.21.6.9 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1500 Precast) Wall Width 100mm (H1: 1640)FT Flume Drain (1600 x 1500 X 2000) | Rmt | 21,719.00 |
| R-17.21.6.10 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1500 Precast) Wall Width 100mm (H1: 1640)FT Flume Drain (1700 x 1500 X 2000) | Rmt | 22,341.00 |
| R-17.21.6.11 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1500 Precast) Wall Width 100mm (H1: 1640)FT Flume Drain (1800 x 1500 X 2000) | Rmt | 22,972.00 |
| R-17.21.6.12 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1500 Precast) Wall Width 100mm (H1: 1640)FT Flume Drain (1900 x 1500 X 2000) | Rmt | 23,603.00 |
| R-17.21.6.13 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1500 Precast) Wall Width 100mm (H1: 1640)FT Flume Drain (2000 x 1500 X 2000) | Rmt | 24,225.00 |
| R-17.21.7.1 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1600 Precast) Wall Width 100mm ( H1:1740)FT Flume Drain (800 X 1600 X 2000) | Rmt | 18,107.00 |
| R-17.21.7.2 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1600 Precast) Wall Width 100mm ( H1:1740)FT Flume Drain (900 x 1600 X 2000) | Rmt | 18,729.00 |
| R-17.21.7.3 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1600 Precast) Wall Width 100mm ( H1:1740)FT Flume Drain (1000 x 1600 X 2000) | Rmt | 19,360.00 |
| R-17.21.7.4 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1600 Precast) Wall Width 100mm ( H1:1740)FT Flume Drain (1100 x 1600 X 2000) | Rmt | 19,982.00 |
| R-17.21.7.5 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1600 Precast) Wall Width 100mm ( H1:1740)FT Flume Drain (1200 x 1600 X 2000) | Rmt | 20,604.00 |
| R-17.21.7.6 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1600 Precast) Wall Width 100mm ( H1:1740)FT Flume Drain (1300 x 1600 X 2000) | Rmt | 21,244.00 |
| R-17.21.7.7 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1600 Precast) Wall Width 100mm ( H1:1740)FT Flume Drain (1400 x 1600 X 2000) | Rmt | 21,866.00 |
| R-17.21.7.8 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1600 Precast) Wall Width 100mm ( H1:1740)FT Flume Drain (1500 x 1600 X 2000) | Rmt | 22,488.00 |
| R-17.21.7.9 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1600 Precast) Wall Width 100mm ( H1:1740)FT Flume Drain (1600 x 1600 X 2000) | Rmt | 23,119.00 |
| R-17.21.7.10 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1600 Precast) Wall Width 100mm ( H1:1740)FT Flume Drain (1700 x 1600 X 2000) | Rmt | 23,740.00 |
| R-17.21.7.11 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1600 Precast) Wall Width 100mm ( H1:1740)FT Flume Drain (1800 x 1600 X 2000) | Rmt | 24,371.00 |
| R-17.21.7.12 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1600 Precast) Wall Width 100mm ( H1:1740)FT Flume Drain (1900 x 1600 X 2000) | Rmt | 25,002.00 |
| R-17.21.7.13 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1600 Precast) Wall Width 100mm ( H1:1740)FT Flume Drain (2000 x 1600 X 2000) | Rmt | 25,313.00 |
| R-17.21.8.1 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1800 Precast) Wall Width 135mm (H1:1970)FT Flume Drain (900 X 1800 X 2000) | Rmt | 27,755.00 |
| R-17.21.8.2 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1800 Precast) Wall Width 135mm (H1:1970)FT Flume Drain (1000 X 1800 X 2000) | Rmt | 28,505.00 |
| R-17.21.8.3 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1800 Precast) Wall Width 135mm (H1:1970)FT Flume Drain (1100 x 1800 X 2000) | Rmt | 29,273.00 |
| R-17.21.8.4 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1800 Precast) Wall Width 135mm (H1:1970)FT Flume Drain (1200 X 1800 x 2000) | Rmt | 30,032.00 |
| R-17.21.8.5 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1800 Precast) Wall Width 135mm (H1:1970)FT Flume Drain (1300 x 1800 X 2000) | Rmt | 30,800.00 |
| R-17.21.8.6 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1800 Precast) Wall Width 135mm (H1:1970)FT Flume Drain (1400 x 1800 X 2000) | Rmt | 31,569.00 |
| R-17.21.8.7 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1800 Precast) Wall Width 135mm (H1:1970)FT Flume Drain (1500 x 1800 X 2000) | Rmt | 32,328.00 |
| R-17.21.8.8 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1800 Precast) Wall Width 135mm (H1:1970)FT Flume Drain (1600 x 1800 X 2000) | Rmt | 33,096.00 |
| R-17.21.8.9 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1800 Precast) Wall Width 135mm (H1:1970)FT Flume Drain (1700 x 1800 X 2000) | Rmt | 33,096.00 |
| R-17.21.8.10 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1800 Precast) Wall Width 135mm (H1:1970)FT Flume Drain (1800 x 1800 X 2000) | Rmt | 34,623.00 |
| R-17.21.8.11 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1800 Precast) Wall Width 135mm (H1:1970)FT Flume Drain (1900 x 1800 X 2000) | Rmt | 35,391.00 |
| R-17.21.8.12 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1800 Precast) Wall Width 135mm (H1:1970)FT Flume Drain (2000 x 1800 X 2000) | Rmt | 36,159.00 |
| R-17.21.8.13 | Providing and Fixing in position precast reinforced cement concrete FT-FIume as per design and shape, using coerce aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / PortIand Iag cement, admixtures In recommended proportion as per IS: 456-2000 and standard like lndlan standard, International standards viz. Japanese Industrial Standards (JIS)/ UG standard/EU standard/ having of strength not less than M-50. using Thermo- Mechanically Treated bare. (TMT/TMX) FE SOOD or mora confirming to IS 1786 reinforcement bar and capable of carrying a wheel load of 5.0 Tones for heavy vehicle movement. Precast reinforced cement concrete drains using, Stormwater/roadside drain, etC. Rate Includes all cost of material, labor charges at the plant, cost of reinforcement, formwork and lifting accessories, and transportation upto work at the she Rate excluded unloading the material at sites, llds and llft. All work up to plinth level: making necessary holes of required sizes for carrying through service Iines etc., providing steel hooks for lifting, etc..the work exalting as per the direction of Engineer In-charge. Note:-Rate shall also Include technical assistance for the instaIIatIon of products at one time. Precast RCC FT-FLUME (HEIGHT-1800 Precast) Wall Width 135mm (H1:1970)FT Flume Drain (2500 x 1800 X 2000) | Rmt | 39,982.00 |
| R-17.22.1 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1000 (H-1300 to 1600) (No Hole) LID width 130 mm | Rmt | 5,760.00 |
| R-17.22.2 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1000 (H-1300 to 1600) (With Hole) LID width 130 mm | Rmt | 5,680.00 |
| R-17.22.3 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1000 (H-1800) (No Hole) LID width 130 mm | Rmt | 6,080.00 |
| R-17.22.4 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1000 (H-1800) (With Hole) LID width 130 mm | Rmt | 5,980.00 |
| R-17.22.5 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1100 (H-1300 to 1600) (No Hole) LID width 130 mm | Rmt | 6,260.00 |
| R-17.22.6 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1100 (H-1300 to 1600) (With Hole) LID width 130 mm | Rmt | 6,180.00 |
| R-17.22.7 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1100 (H-1800) (No Hole) LID width 130 mm | Rmt | 6,580.00 |
| R-17.22.8 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1100 (H-1800) (With Hole) LID width 130 mm | Rmt | 6,460.00 |
| R-17.22.9 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1200 (H-1300 to 1600) (No Hole) LID width 130 mm | Rmt | 6,760.00 |
| R-17.22.10 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1200 (H-1300 to 1600) (With Hole) LID width 130 mm | Rmt | 6,680.00 |
| R-17.22.11 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1200 (H-1800) (No Hole) LID width 130 mm | Rmt | 7,060.00 |
| R-17.22.12 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1200 (H-1800) (With Hole) LID width 130 mm | Rmt | 6,980.00 |
| R-17.22.13 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1300 (H-1300 to 1600) (No Hole) LID width 130 mm | Rmt | 7,260.00 |
| R-17.22.14 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1300 (H-1300 to 1600) (With Hole) LID width 130 mm | Rmt | 7,160.00 |
| R-17.22.15 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1300 (H-1800) (No Hole) LID width 130 mm | Rmt | 7,560.00 |
| R-17.22.16 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1300 (H-1800) (With Hole) LID width 130 mm | Rmt | 7,460.00 |
| R-17.22.17 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1400 (H-1300 to 1600) (No Hole) LID width 130 mm | Rmt | 10,120.00 |
| R-17.22.18 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1400 (H-1300 to 1600) (With Hole) LID width 130 mm | Rmt | 10,000.00 |
| R-17.22.19 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1400 (H-1800) (No Hole) LID width 130 mm | Rmt | 10,520.00 |
| R-17.22.20 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1400 (H-1800) (With Hole) LID width 130 mm | Rmt | 10,380.00 |
| R-17.22.21 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1500 (H-1300 to 1600) (No Hole) LID width 130 mm | Rmt | 10,760.00 |
| R-17.22.23 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1500 (H-1800) (No Hole) LID width 130 mm | Rmt | 11,160.00 |
| R-17.22.24 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1500 (H-1800) (With Hole) LID width 130 mm | Rmt | 11,040.00 |
| R-17.22.26 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1600 (H-1300 to 1600) (With Hole) LID width 130 mm | Rmt | 11,260.00 |
| R-17.22.27 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1600 (H-1800) (No Hole) LID width 130 mm | Rmt | 11,800.00 |
| R-17.22.28 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1600 (H-1800) (With Hole) LID width 130 mm | Rmt | 11,680.00 |
| R-17.22.29 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1700 (H-1300 to 1600) (No Hole) LID width 130 mm | Rmt | 12,060.00 |
| R-17.22.30 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1700 (H-1300 to 1600) (With Hole) LID width 130 mm | Rmt | 11,920.00 |
| R-17.22.31 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1700 (H-1800) (No Hole) LID width 130 mm | Rmt | 12,460.00 |
| R-17.22.32 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1700 (H-1800) (With Hole) LID width 130 mm | Rmt | 12,320.00 |
| R-17.22.33 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1800 (H-1300 to 1600) (No Hole) LID width 130 mm | Rmt | 12,680.00 |
| R-17.22.34 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1800 (H-1300 to 1600) (With Hole) LID width 130 mm | Rmt | 12,560.00 |
| R-17.22.35 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1800 (H-1800) (No Hole) LID width 130 mm | Rmt | 13,100.00 |
| R-17.22.36 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1800 (H-1800) (With Hole) LID width 130 mm | Rmt | 12,960.00 |
| R-17.22.37 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1900 (H-1300 to 1600) (No Hole) LID width 130 mm | Rmt | 13,320.00 |
| R-17.22.38 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1900 (H-1300 to 1600) (With Hole) LID width 130 mm | Rmt | 13,200.00 |
| R-17.22.39 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1900 (H-1800) (No Hole) LID width 130 mm | Rmt | 13,740.00 |
| R-17.22.40 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W1900 (H-1800) (With Hole) LID width 130 mm | Rmt | 13,600.00 |
| R-17.22.41 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W2000 (H-1300 to 1600) (No Hole) LID width 130 mm | Rmt | 13,960.00 |
| R-17.22.42 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W2000 (H-1300 to 1600) (With Hole) LID width 130 mm | Rmt | 13,840.00 |
| R-17.22.43 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W2000 (H-1800) (No Hole) LID width 130 mm | Rmt | 14,380.00 |
| R-17.22.44 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W2000 (H-1800) (With Hole) LID width 130 mm | Rmt | 14,260.00 |
| R-17.22.45 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W600 (H-1300 to 1600) (No Hole) LID width 130 mm | Rmt | 3,800.00 |
| R-17.22.46 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W600 (H-1300 to 1600) (With Hole) LID width 130 mm | Rmt | 3,700.00 |
| R-17.22.47 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W700 (H-1300 to 1600) (No Hole) LID width 130 mm | Rmt | 4,280.00 |
| R-17.22.48 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W700 (H-1300 to 1600) (With Hole) LID width 130 mm | Rmt | 4,200.00 |
| R-17.22.49 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W800 (H-1300 to 1600) (No Hole) LID width 130 mm | Rmt | 4,780.00 |
| R-17.22.50 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W800 (H-1300 to 1600) (With Hole) LID width 130 mm | Rmt | 4,700.00 |
| R-17.22.51 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W900 (H-1300 to 1600) (No Hole) LID width 130 mm | Rmt | 5,280.00 |
| R-17.22.52 | Providing and fixing factory-made precast RCC U-shape drain (Precast FT Flume) drain covers, having of strength not less than M-50, using Thermo-Mechanically Treated bars. (TMT/TMX) FE 500D or more conforming to IS 1786 reinforcement bar As per standard size reinforced with 8 mm dia main longitudinal & 6 mm nos cross-sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 2 nos, all as per direction of Engineer-in-chargeFT Flume Lid W900 (H-1300 to 1600) (With Hole) LID width 130 mm | Rmt | 5,200.00 |
| R-17.23 | Supply of high performance specialized additive in powder form that helps in retaining water in concrete system for extended period of time thereby allowing the internal curing to happen without necessity of external water curing and use of curing compund in cement concrete flooring / cement concrete roads plain or RCC works. It is required in specified ratio @ 2% (1 kg additive in 50 kgs cement for use) by weight of cementitious material that makes the concrete curing free, reduction in shrinkage and reduced water permeability. It shall attain upto 50% strength in first 48 hours | KG | 110.00 |
| R-17.25 | Providing and Laying Treatment of Wear and Tear Concrete surface with pre-mixed, high performance, curing free, quick setting ready to use cement mortar for repairing of pot holes with minimum 25mm depth and without cutting the panel so that traffic can be mobilized in 4 hours. The high performance Ready Mix Concrete Mortar should be curing free and able to achieve compressive strength of 10 Mpa within 4 hours and bond strength of 4 Mpa within 24 hours, non shrink and non toxic | Cum | 79,480.00 |
| R-17.26 | Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge) | Sqm | 3,221.00 |
| R-17.27 | Providing and laying treatment of wear & tear of concrete surface with pre-mixed, ready to use, high performance, curing free, quick-setting ready to use geopolymer mortar for repairing of potholes on concrete surface by cutting the panel in a regular shape with minimum 50 mm depth so that traffic can be mobilized in 4 hours. The high performance mortar should be curing free, achieve compressive strength of 20 MPa within 4 Hours and 35 MPa within 24 Hours achieve bond strength of 4 MPa within 24 Hours, non shrink and non toxic. The methodology includes proper excavation and chipping of surface, cutting the panel in regular shape using concrete cutting tools and break hammer, removal of all loose particles, application of advanced bonding compound and maintaining proper thickness during application. For large area casting, expansion joints need to be maintained at an interval of every 1.8 meters | Sqm | 5,588.00 |
| R-17.28 | Add extra for every additional thickness of 10mm | Sqm | 1,197.00 |
| R-17.29 | Supply and Fixing of Pre-Stressed Concrete (Grade M-40) Sign Board having size 900 mm x 600 mm of Thickness 50 mm duly framed with two posts of Pre-stressed Concrete (grade of M-40) size 150 mm x 150 mm of 2 m long above the GL and 900 mm embedded in ground in cement concrete block of 450 mm dia of 600 mm long of M-30 grade concrete as per approved drawing by Engineer-In-Charge including painting with black/white water proof cement paint 2 or more coat with all lead & lift carriage, labour all T & P complete in all respect. The facia of board shall be provide with letters & boarder as approved by Engineer-In-Charge | Each | 3,629.00 |
| R-17.30 | Raised Payment Marker (Cats Eye): Supplying and Fixing of Molded Shank Raised Pavement Markers made of ABS Moulded body and Polycarbonate Reflective panels with Micro Prismatic Lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 35000 Kilogram tested in accordance to ASIM D 4280 & ASTM D 788. The Height of Road Stud is 20mm, Width 100mm, Length 100mm and minimum reflective area of 13 sqcm on each side.The Strength of detachment of the integrated cylender shank not less than 14+/-2mm (Thickness) and height not less than 30+ 2mm from the body. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive | Each | 150.00 |
| R-17.32 | Providing & covering by GOBAR LAP on Helipad as direction given by engineer-in-charge | Sqm | 24.00 |
| R-17.34.1(a) | Providing & Laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile Indigenously manufactured from high quality Polypropylene stable fibres (Continuous filament will not be accepted) on the prepared subgrade for seperator cum filtration cum drainage application with necessary overlaps as per drawingType I (TFI-TechGeo PR15), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 126.00 |
| R-17.34.2 | Providing & Laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile Indigenously manufactured from high quality Polypropylene stable fibres (Continuous filament will not be accepted) on the prepared subgrade for seperator cum filtration cum drainage application with necessary overlaps as per drawingLabour rate | Sqm | 38.00 |
| R-17.34.3(b) | Providing & Laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile Indigenously manufactured from high quality Polypropylene stable fibres (Continuous filament will not be accepted) on the prepared subgrade for seperator cum filtration cum drainage application with necessary overlaps as per drawingType II (TFI-TechGeo PR20), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 143.00 |
| R-17.34.4 | Providing & Laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile Indigenously manufactured from high quality Polypropylene stable fibres (Continuous filament will not be accepted) on the prepared subgrade for seperator cum filtration cum drainage application with necessary overlaps as per drawingLabour rate | Sqm | 38.00 |
| R-17.34.5(c) | Providing & Laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile Indigenously manufactured from high quality Polypropylene stable fibres (Continuous filament will not be accepted) on the prepared subgrade for seperator cum filtration cum drainage application with necessary overlaps as per drawingType III (TFI-TechGeo PR25), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 161.00 |
| R-17.34.6 | Providing & Laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile Indigenously manufactured from high quality Polypropylene stable fibres (Continuous filament will not be accepted) on the prepared subgrade for seperator cum filtration cum drainage application with necessary overlaps as per drawingLabour rate | Sqm | 38.00 |
| R-17.34.7(d) | Providing & Laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile Indigenously manufactured from high quality Polypropylene stable fibres (Continuous filament will not be accepted) on the prepared subgrade for seperator cum filtration cum drainage application with necessary overlaps as per drawingType IV (TFI-TechGeo PR30), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 177.00 |
| R-17.34.8 | Providing & Laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile Indigenously manufactured from high quality Polypropylene stable fibres (Continuous filament will not be accepted) on the prepared subgrade for seperator cum filtration cum drainage application with necessary overlaps as per drawingLabour rate | Sqm | 38.00 |
| R-17.34.9(e) | Providing & Laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile Indigenously manufactured from high quality Polypropylene stable fibres (Continuous filament will not be accepted) on the prepared subgrade for seperator cum filtration cum drainage application with necessary overlaps as per drawingType V (TFI-TechGeo PR40), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 240.00 |
| R-17.34.10 | Providing & Laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile Indigenously manufactured from high quality Polypropylene stable fibres (Continuous filament will not be accepted) on the prepared subgrade for seperator cum filtration cum drainage application with necessary overlaps as per drawingLabour rate | Sqm | 38.00 |
| R-17.34.11(f) | Providing & Laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile Indigenously manufactured from high quality Polypropylene stable fibres (Continuous filament will not be accepted) on the prepared subgrade for seperator cum filtration cum drainage application with necessary overlaps as per drawingType VI (TFI-TechGeo PR50), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 291.00 |
| R-17.34.12 | Providing & Laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile Indigenously manufactured from high quality Polypropylene stable fibres (Continuous filament will not be accepted) on the prepared subgrade for seperator cum filtration cum drainage application with necessary overlaps as per drawingLabour rate | Sqm | 38.00 |
| R-17.34.13(g) | Providing & Laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile Indigenously manufactured from high quality Polypropylene stable fibres (Continuous filament will not be accepted) on the prepared subgrade for seperator cum filtration cum drainage application with necessary overlaps as per drawingType VII (TFI-TechGeo PR60), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 337.00 |
| R-17.34.14 | Providing & Laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile Indigenously manufactured from high quality Polypropylene stable fibres (Continuous filament will not be accepted) on the prepared subgrade for seperator cum filtration cum drainage application with necessary overlaps as per drawingLabour rate | Sqm | 38.00 |
| R-17.35.1(a) | Providing & Laying Fibreglass Geogrid of Indigenously manufactured from high quality glaa fibre strands and coated with a polymer modified bitumen as reinforcement to asphalt overlay flexible pavements and asphalt over distressed rigid PCC pavementsType 50 (TFI-Techglass 50 kN x 50 kN) Minimum width of 2.5 Meter/5.0 meter. As per the approved comparative Statement | Sqm | 188.00 |
| R-17.35.2 | Providing & Laying Fibreglass Geogrid of Indigenously manufactured from high quality glaa fibre strands and coated with a polymer modified bitumen as reinforcement to asphalt overlay flexible pavements and asphalt over distressed rigid PCC pavementsLabour rate | Sqm | 38.00 |
| R-17.35.3(b) | Providing & Laying Fibreglass Geogrid of Indigenously manufactured from high quality glaa fibre strands and coated with a polymer modified bitumen as reinforcement to asphalt overlay flexible pavements and asphalt over distressed rigid PCC pavementsType 100 (TFI-Techglass 100 kN x 100 kN) Minimum width of 2.5 Meter/5.0 meter. As per the approved comparative Statement | Sqm | 273.00 |
| R-17.35.4 | Providing & Laying Fibreglass Geogrid of Indigenously manufactured from high quality glaa fibre strands and coated with a polymer modified bitumen as reinforcement to asphalt overlay flexible pavements and asphalt over distressed rigid PCC pavementsLabour rate | Sqm | 38.00 |
| R-17.35.5(c) | Providing & Laying Fibreglass Geogrid of Indigenously manufactured from high quality glaa fibre strands and coated with a polymer modified bitumen as reinforcement to asphalt overlay flexible pavements and asphalt over distressed rigid PCC pavementsType 200 (TFI-Techglass 100 kN x 200 kN) Minimum width of 2.5 Meter/5.0 meter. As per the approved comparative Statement | Sqm | 345.00 |
| R-17.35.6 | Providing & Laying Fibreglass Geogrid of Indigenously manufactured from high quality glaa fibre strands and coated with a polymer modified bitumen as reinforcement to asphalt overlay flexible pavements and asphalt over distressed rigid PCC pavementsLabour rate | Sqm | 38.00 |
| R-17.36.1(a) | Providing & Laying CE Marked woven multifilament Polyster Geotextile Indigenously manufactured from high quality Polyster filament yarns for soil reinforcement and stabilisation on the prepared subgrade with necessary overlaps and as per drawingType A (TFI 3100 : 100 kN/m x 50 kN/m), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 151.00 |
| R-17.36.2 | Providing & Laying CE Marked woven multifilament Polyster Geotextile Indigenously manufactured from high quality Polyster filament yarns for soil reinforcement and stabilisation on the prepared subgrade with necessary overlaps and as per drawingLabour rate | Sqm | 38.00 |
| R-17.36.3(b) | Providing & Laying CE Marked woven multifilament Polyster Geotextile Indigenously manufactured from high quality Polyster filament yarns for soil reinforcement and stabilisation on the prepared subgrade with necessary overlaps and as per drawingType B (TFI 3200 : 200 kN/m x 50 kN/m), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 188.00 |
| R-17.36.4 | Providing & Laying CE Marked woven multifilament Polyster Geotextile Indigenously manufactured from high quality Polyster filament yarns for soil reinforcement and stabilisation on the prepared subgrade with necessary overlaps and as per drawingLabour rate | Sqm | 38.00 |
| R-17.37.1(a) | Providing & Laying CE Marked Knitted and PVC coated Polyster Biaxial Geogrid for Basal Reinforcement Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol.Kg) for soil reinforcement application for stabilisation, requirement of geogrid strength in both direction and granular fill (extruded PP geogrid & Polyster strips & Geostrips & Steel Strips not allowed), Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating is not acceptedType I = TFI-TechGeo TGB 30 (30 kN/mx30 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 164.00 |
| R-17.37.2 | Providing & Laying CE Marked Knitted and PVC coated Polyster Biaxial Geogrid for Basal Reinforcement Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol.Kg) for soil reinforcement application for stabilisation, requirement of geogrid strength in both direction and granular fill (extruded PP geogrid & Polyster strips & Geostrips & Steel Strips not allowed), Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating is not acceptedLabour rate | Sqm | 38.00 |
| R-17.37.3(b) | Providing & Laying CE Marked Knitted and PVC coated Polyster Biaxial Geogrid for Basal Reinforcement Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol.Kg) for soil reinforcement application for stabilisation, requirement of geogrid strength in both direction and granular fill (extruded PP geogrid & Polyster strips & Geostrips & Steel Strips not allowed), Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating is not acceptedType II = TFI-TechGeo TGB 40 (40 kN/mx 40 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 188.00 |
| R-17.37.4 | Providing & Laying CE Marked Knitted and PVC coated Polyster Biaxial Geogrid for Basal Reinforcement Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol.Kg) for soil reinforcement application for stabilisation, requirement of geogrid strength in both direction and granular fill (extruded PP geogrid & Polyster strips & Geostrips & Steel Strips not allowed), Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating is not acceptedLabour rate | Sqm | 38.00 |
| R-17.37.5(c) | Providing & Laying CE Marked Knitted and PVC coated Polyster Biaxial Geogrid for Basal Reinforcement Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol.Kg) for soil reinforcement application for stabilisation, requirement of geogrid strength in both direction and granular fill (extruded PP geogrid & Polyster strips & Geostrips & Steel Strips not allowed), Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating is not acceptedType III = TFI-TechGeo TGB 60 (60 kN/mx 60 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 239.00 |
| R-17.37.6 | Providing & Laying CE Marked Knitted and PVC coated Polyster Biaxial Geogrid for Basal Reinforcement Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol.Kg) for soil reinforcement application for stabilisation, requirement of geogrid strength in both direction and granular fill (extruded PP geogrid & Polyster strips & Geostrips & Steel Strips not allowed), Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating is not acceptedLabour rate | Sqm | 38.00 |
| R-17.37.7(d) | Providing & Laying CE Marked Knitted and PVC coated Polyster Biaxial Geogrid for Basal Reinforcement Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol.Kg) for soil reinforcement application for stabilisation, requirement of geogrid strength in both direction and granular fill (extruded PP geogrid & Polyster strips & Geostrips & Steel Strips not allowed), Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating is not acceptedType IV = TFI-TechGeo TGB 90 (90 kN/mx 90 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 292.00 |
| R-17.37.8 | Providing & Laying CE Marked Knitted and PVC coated Polyster Biaxial Geogrid for Basal Reinforcement Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol.Kg) for soil reinforcement application for stabilisation, requirement of geogrid strength in both direction and granular fill (extruded PP geogrid & Polyster strips & Geostrips & Steel Strips not allowed), Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating is not acceptedLabour rate | Sqm | 38.00 |
| R-17.37.9(e) | Providing & Laying CE Marked Knitted and PVC coated Polyster Biaxial Geogrid for Basal Reinforcement Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol.Kg) for soil reinforcement application for stabilisation, requirement of geogrid strength in both direction and granular fill (extruded PP geogrid & Polyster strips & Geostrips & Steel Strips not allowed), Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating is not acceptedType V = TFI-TechGeo TGB 100 (100 kN/mx 100 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 310.00 |
| R-17.37.10 | Providing & Laying CE Marked Knitted and PVC coated Polyster Biaxial Geogrid for Basal Reinforcement Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol.Kg) for soil reinforcement application for stabilisation, requirement of geogrid strength in both direction and granular fill (extruded PP geogrid & Polyster strips & Geostrips & Steel Strips not allowed), Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating is not acceptedLabour rate | Sqm | 38.00 |
| R-17.37.11(f) | Providing & Laying CE Marked Knitted and PVC coated Polyster Biaxial Geogrid for Basal Reinforcement Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol.Kg) for soil reinforcement application for stabilisation, requirement of geogrid strength in both direction and granular fill (extruded PP geogrid & Polyster strips & Geostrips & Steel Strips not allowed), Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating is not acceptedType VI = TFI-TechGeo TGB 150 (150 kN/mx 150 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 349.00 |
| R-17.37.12 | Providing & Laying CE Marked Knitted and PVC coated Polyster Biaxial Geogrid for Basal Reinforcement Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol.Kg) for soil reinforcement application for stabilisation, requirement of geogrid strength in both direction and granular fill (extruded PP geogrid & Polyster strips & Geostrips & Steel Strips not allowed), Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating is not acceptedLabour rate | Sqm | 38.00 |
| R-17.38.1(a) | Providing & Laying Reinforced Non-Woven composite Indigenously manufactured from Needle punched Polypropylene Non-woven Geotextile (Continuous filament non wiven geotextile will not be accepted) Reinforced with high tenacity Polyster yarn on the prepared subgrade for separator cum filteration cum reinforcement applicationType A (TFI-TGC 60 kN/m x 60 kN/m), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 250.00 |
| R-17.38.2 | Providing & Laying Reinforced Non-Woven composite Indigenously manufactured from Needle punched Polypropylene Non-woven Geotextile (Continuous filament non wiven geotextile will not be accepted) Reinforced with high tenacity Polyster yarn on the prepared subgrade for separator cum filteration cum reinforcement applicationLabour rate | Sqm | 38.00 |
| R-17.38.3(b) | Providing & Laying Reinforced Non-Woven composite Indigenously manufactured from Needle punched Polypropylene Non-woven Geotextile (Continuous filament non wiven geotextile will not be accepted) Reinforced with high tenacity Polyster yarn on the prepared subgrade for separator cum filteration cum reinforcement applicationType B (TFI-TGC 90 kN/m x 90 kN/m), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 310.00 |
| R-17.38.4 | Providing & Laying Reinforced Non-Woven composite Indigenously manufactured from Needle punched Polypropylene Non-woven Geotextile (Continuous filament non wiven geotextile will not be accepted) Reinforced with high tenacity Polyster yarn on the prepared subgrade for separator cum filteration cum reinforcement applicationLabour rate | Sqm | 38.00 |
| R-17.39.1(a) | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Type I (TFI-TechGrid TGU 40) (40 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 159.00 |
| R-17.39.2 | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Labour rate | Sqm | 38.00 |
| R-17.39.3(b) | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Type II (TFI-TechGrid TGU 60) (60 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 151.00 |
| R-17.39.4 | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Labour rate | Sqm | 38.00 |
| R-17.39.5(c) | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Type III (TFI-TechGrid TGU 80) (80 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 188.00 |
| R-17.39.6 | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Labour rate | Sqm | 38.00 |
| R-17.39.7(d) | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Type IV (TFI-TechGrid TGU 100) (100 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 218.00 |
| R-17.39.8 | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Labour rate | Sqm | 38.00 |
| R-17.39.9(e) | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Type V (TFI-TechGrid TGU 120) (120 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 249.00 |
| R-17.39.10 | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Labour rate | Sqm | 38.00 |
| R-17.39.11(f) | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Type VI (TFI-TechGrid TGU 150) (150 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 286.00 |
| R-17.39.12 | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Labour rate | Sqm | 38.00 |
| R-17.39.13(g) | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Type VII (TFI-TechGrid TGU 200) (200 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 353.00 |
| R-17.39.14 | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Labour rate | Sqm | 38.00 |
| R-17.39.15(h) | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Type VIII (TFI-TechGrid TGU 250) (250 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 394.00 |
| R-17.39.16 | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Labour rate | Sqm | 38.00 |
| R-17.39.17(h) | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Type VIII (TFI-TechGrid TGU 300) (300 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 430.00 |
| R-17.39.18 | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Labour rate | Sqm | 38.00 |
| R-17.39.19(h) | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Type VIII (TFI-TechGrid TGU 350) (350 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 461.00 |
| R-17.39.20 | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Labour rate | Sqm | 38.00 |
| R-17.39.21(h) | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Type VIII (TFI-TechGrid TGU 400) (400 kN/m Ultimate tensile strength), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 497.00 |
| R-17.39.22 | Providing & Laying CE Marked Knitted and PVC coated Polyster Uniaxial Geogrid, Indigenously manufactured from selected high tenacity polyster yarn with high molecular weight (>25000 g/mol), and low carboxyl end group (<30mmol./Kg) for reinforcement soil wall & reinforced slope application with granular fill as per design prepared by technical provider of reinforced earth wall and slope (Reinforced geosynthetic product of extruded PP geogrids & Polyster strips & Geostrips & Steel strips not allowed & not accepted), The reinforced earth wall and slope should have 100% coverage pf knitted and PVC coated polyster Uniaxial Geogrid. (Coating of Geogrid and Geosynthetic reinforcing material with LDPE, Latex, Bitumen and any other coating will not be allowed)Labour rate | Sqm | 38.00 |
| R-17.40.1(a) | Providing & Laying Woven Polypropylene multifilament Geotextile of Indigenously manufactured from multifilament Polypropylene yarn on the prepared subgrade (CBR less than 3%) as per separator cum drainage cum reinforcement with necessary overlaps as per drawingsType I (TFI 1100), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 110.00 |
| R-17.40.2 | Providing & Laying Woven Polypropylene multifilament Geotextile of Indigenously manufactured from multifilament Polypropylene yarn on the prepared subgrade (CBR less than 3%) as per separator cum drainage cum reinforcement with necessary overlaps as per drawingsLabour rate | Sqm | 20.00 |
| R-17.40.3(b) | Providing & Laying Woven Polypropylene multifilament Geotextile of Indigenously manufactured from multifilament Polypropylene yarn on the prepared subgrade (CBR less than 3%) as per separator cum drainage cum reinforcement with necessary overlaps as per drawingsType II (TFI 1200), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 126.00 |
| R-17.40.4 | Providing & Laying Woven Polypropylene multifilament Geotextile of Indigenously manufactured from multifilament Polypropylene yarn on the prepared subgrade (CBR less than 3%) as per separator cum drainage cum reinforcement with necessary overlaps as per drawingsLabour rate | Sqm | 20.00 |
| R-17.40.5(c) | Providing & Laying Woven Polypropylene multifilament Geotextile of Indigenously manufactured from multifilament Polypropylene yarn on the prepared subgrade (CBR less than 3%) as per separator cum drainage cum reinforcement with necessary overlaps as per drawingsType III (TFI 1300), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 133.00 |
| R-17.40.6 | Providing & Laying Woven Polypropylene multifilament Geotextile of Indigenously manufactured from multifilament Polypropylene yarn on the prepared subgrade (CBR less than 3%) as per separator cum drainage cum reinforcement with necessary overlaps as per drawingsLabour rate | Sqm | 20.00 |
| R-17.41.1(a) | Providing and laying CE Marked Woven Polypropylene Geotextile indigenously manufactured from black UV stabilized polypropylene flat tape/ fibrillated tape yarns on the prepared subgrade (CBR less than 3%) as a separator cum Reinforcement with necessary overlaps having minimum 5 years Performance certificate from any State PWD and as per drawingsType I (TFI 5100), Minimum width 5.3 meter. As per the approved comparative Statement | Sqm | 110.00 |
| R-17.41.2 | Providing and laying CE Marked Woven Polypropylene Geotextile indigenously manufactured from black UV stabilized polypropylene flat tape/ fibrillated tape yarns on the prepared subgrade (CBR less than 3%) as a separator cum Reinforcement with necessary overlaps having minimum 5 years Performance certificate from any State PWD and as per drawingsLabour rate | Sqm | 38.00 |
| R-17.41.3(b) | Providing and laying CE Marked Woven Polypropylene Geotextile indigenously manufactured from black UV stabilized polypropylene flat tape/ fibrillated tape yarns on the prepared subgrade (CBR less than 3%) as a separator cum Reinforcement with necessary overlaps having minimum 5 years Performance certificate from any State PWD and as per drawingsType II (TFI 5200), Minimum width 5.3 meter. As per the approved comparative Statement | Sqm | 126.00 |
| R-17.41.4 | Providing and laying CE Marked Woven Polypropylene Geotextile indigenously manufactured from black UV stabilized polypropylene flat tape/ fibrillated tape yarns on the prepared subgrade (CBR less than 3%) as a separator cum Reinforcement with necessary overlaps having minimum 5 years Performance certificate from any State PWD and as per drawingsLabour rate | Sqm | 38.00 |
| R-17.41.5(c) | Providing and laying CE Marked Woven Polypropylene Geotextile indigenously manufactured from black UV stabilized polypropylene flat tape/ fibrillated tape yarns on the prepared subgrade (CBR less than 3%) as a separator cum Reinforcement with necessary overlaps having minimum 5 years Performance certificate from any State PWD and as per drawingsType III(TFI 5300), Minimum width 5.3 meter. As per the approved comparative Statement | Sqm | 150.00 |
| R-17.41.6 | Providing and laying CE Marked Woven Polypropylene Geotextile indigenously manufactured from black UV stabilized polypropylene flat tape/ fibrillated tape yarns on the prepared subgrade (CBR less than 3%) as a separator cum Reinforcement with necessary overlaps having minimum 5 years Performance certificate from any State PWD and as per drawingsLabour rate | Sqm | 38.00 |
| R-17.42.1(a) | Providing and Laying Needle punched and mechanically bonded Non-woven paving Fabric indigenously manufactured from high quality polypropylene stable fibres (continuous filament will not be accepted)over a tack coat of paving grade bitumen 80-100 preparation, laid at the rate of 1 kg per sq.mtr over thoroughly cleaned and repaired surface to provide a water resistant membrane and crack retarding layer.Paving fabric to be laid before cooling of tack coat,brooming and rolling of surface with pnematic roller to maximise paving fabric contact with pavement surface as per drawing and product approval certificate from M/s CRRI,New DelhiTechPave (TFI TechPave C040), Minimum width 5.0 meter. As per the approved comparative Statement | Sqm | 160.00 |
| R-17.42.2 | Providing and Laying Needle punched and mechanically bonded Non-woven paving Fabric indigenously manufactured from high quality polypropylene stable fibres (continuous filament will not be accepted)over a tack coat of paving grade bitumen 80-100 preparation, laid at the rate of 1 kg per sq.mtr over thoroughly cleaned and repaired surface to provide a water resistant membrane and crack retarding layer.Paving fabric to be laid before cooling of tack coat,brooming and rolling of surface with pnematic roller to maximise paving fabric contact with pavement surface as per drawing and product approval certificate from M/s CRRI,New DelhiLabour rate | Sqm | 38.00 |
| R-17.43.2 | Providing and Fixing Gabions of only TFI made of mechanically waven hexagonal shaped wire mesh of type,10x12cm with edges selvedge made of heavily(Zinc+PVC) coated GI wires as per BS:443,mesh wire 2.70mm 0 of only TFI/ TechBox type filled with 20kg to 50 kg weight trap stones including conveying with all the leads & lifts and placing at required places in required line,level,slope,section as directed etc to complete Reinforced Earth Walls & Slopes as per DrawingLabour rate | Cum | 76.00 |
| R-17.44.1(a) | Providing and laying only CE Marked Knitted and PVC coated Polyester Uniaxial Geogrid- Techgrid indegeniously manufactured from selected high tenacity polyester yarn with high molecular weight (>25000 g/mol), and low carboxyl end group(<30mmol/kg) for Reinforced soil wall (Reinforcing Geosynthetic product material of extruded PP geogrids & polyester strips & Geosynthetic & Steel strips not allowed) with granular fill of PHi-32 degree (design is to be carried out in accordance with BS-8006/FHWA)with concrete block (M35)as facia,casting & erection of blocks with techgrid, providing and laying of levelling pad of M15, Providing and laying coping beam (M35),Providing and laying 600mm thick filtermedia etc. completed as per the necessary drawing and instruction of Engineer In Charge. Excluding providing, laying and compacting selected backfill and retained fill behind the wall, excavation and ground improvement, if any. The reinforced earth wall and slope should have 100% coverage of 5m width Knitted and PVC coated polyester Geogrid.(Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating will not be allowed and will not be accepted)PVC coated polyester geogrid-Techgrid 1 meter to 4 meter | Sqm | 5,821.00 |
| R-17.44.3(b) | Providing and laying only CE Marked Knitted and PVC coated Polyester Uniaxial Geogrid- Techgrid indegeniously manufactured from selected high tenacity polyester yarn with high molecular weight (>25000 g/mol), and low carboxyl end group(<30mmol/kg) for Reinforced soil wall (Reinforcing Geosynthetic product material of extruded PP geogrids & polyester strips & Geosynthetic & Steel strips not allowed) with granular fill of PHi-32 degree (design is to be carried out in accordance with BS-8006/FHWA)with concrete block (M35)as facia,casting & erection of blocks with techgrid, providing and laying of levelling pad of M15, Providing and laying coping beam (M35),Providing and laying 600mm thick filtermedia etc. completed as per the necessary drawing and instruction of Engineer In Charge. Excluding providing, laying and compacting selected backfill and retained fill behind the wall, excavation and ground improvement, if any. The reinforced earth wall and slope should have 100% coverage of 5m width Knitted and PVC coated polyester Geogrid.(Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating will not be allowed and will not be accepted)PVC coated polyester geogrid-Techgrid 4 meter to 6 meter | Sqm | 6,306.00 |
| R-17.44.5(c) | Providing and laying only CE Marked Knitted and PVC coated Polyester Uniaxial Geogrid- Techgrid indegeniously manufactured from selected high tenacity polyester yarn with high molecular weight (>25000 g/mol), and low carboxyl end group(<30mmol/kg) for Reinforced soil wall (Reinforcing Geosynthetic product material of extruded PP geogrids & polyester strips & Geosynthetic & Steel strips not allowed) with granular fill of PHi-32 degree (design is to be carried out in accordance with BS-8006/FHWA)with concrete block (M35)as facia,casting & erection of blocks with techgrid, providing and laying of levelling pad of M15, Providing and laying coping beam (M35),Providing and laying 600mm thick filtermedia etc. completed as per the necessary drawing and instruction of Engineer In Charge. Excluding providing, laying and compacting selected backfill and retained fill behind the wall, excavation and ground improvement, if any. The reinforced earth wall and slope should have 100% coverage of 5m width Knitted and PVC coated polyester Geogrid.(Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating will not be allowed and will not be accepted)PVC coated polyester geogrid-Techgrid 6 meter to 8 meter | Sqm | 7,034.00 |
| R-17.44.7(d) | Providing and laying only CE Marked Knitted and PVC coated Polyester Uniaxial Geogrid- Techgrid indegeniously manufactured from selected high tenacity polyester yarn with high molecular weight (>25000 g/mol), and low carboxyl end group(<30mmol/kg) for Reinforced soil wall (Reinforcing Geosynthetic product material of extruded PP geogrids & polyester strips & Geosynthetic & Steel strips not allowed) with granular fill of PHi-32 degree (design is to be carried out in accordance with BS-8006/FHWA)with concrete block (M35)as facia,casting & erection of blocks with techgrid, providing and laying of levelling pad of M15, Providing and laying coping beam (M35),Providing and laying 600mm thick filtermedia etc. completed as per the necessary drawing and instruction of Engineer In Charge. Excluding providing, laying and compacting selected backfill and retained fill behind the wall, excavation and ground improvement, if any. The reinforced earth wall and slope should have 100% coverage of 5m width Knitted and PVC coated polyester Geogrid.(Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating will not be allowed and will not be accepted)PVC coated polyester geogrid-Techgrid 8 meter to 10 meter | Sqm | 8,228.00 |
| R-17.44.9(e) | Providing and laying only CE Marked Knitted and PVC coated Polyester Uniaxial Geogrid- Techgrid indegeniously manufactured from selected high tenacity polyester yarn with high molecular weight (>25000 g/mol), and low carboxyl end group(<30mmol/kg) for Reinforced soil wall (Reinforcing Geosynthetic product material of extruded PP geogrids & polyester strips & Geosynthetic & Steel strips not allowed) with granular fill of PHi-32 degree (design is to be carried out in accordance with BS-8006/FHWA)with concrete block (M35)as facia,casting & erection of blocks with techgrid, providing and laying of levelling pad of M15, Providing and laying coping beam (M35),Providing and laying 600mm thick filtermedia etc. completed as per the necessary drawing and instruction of Engineer In Charge. Excluding providing, laying and compacting selected backfill and retained fill behind the wall, excavation and ground improvement, if any. The reinforced earth wall and slope should have 100% coverage of 5m width Knitted and PVC coated polyester Geogrid.(Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating will not be allowed and will not be accepted)PVC coated polyester geogrid-Techgrid 10 meter to 12 meter | Sqm | 8,544.00 |
| R-17.44.11(f) | Providing and laying only CE Marked Knitted and PVC coated Polyester Uniaxial Geogrid- Techgrid indegeniously manufactured from selected high tenacity polyester yarn with high molecular weight (>25000 g/mol), and low carboxyl end group(<30mmol/kg) for Reinforced soil wall (Reinforcing Geosynthetic product material of extruded PP geogrids & polyester strips & Geosynthetic & Steel strips not allowed) with granular fill of PHi-32 degree (design is to be carried out in accordance with BS-8006/FHWA)with concrete block (M35)as facia,casting & erection of blocks with techgrid, providing and laying of levelling pad of M15, Providing and laying coping beam (M35),Providing and laying 600mm thick filtermedia etc. completed as per the necessary drawing and instruction of Engineer In Charge. Excluding providing, laying and compacting selected backfill and retained fill behind the wall, excavation and ground improvement, if any. The reinforced earth wall and slope should have 100% coverage of 5m width Knitted and PVC coated polyester Geogrid.(Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating will not be allowed and will not be accepted)PVC coated polyester geogrid-Techgrid 12 meter to 14 meter | Sqm | 9,416.00 |
| R-17.44.13(f) | Providing and laying only CE Marked Knitted and PVC coated Polyester Uniaxial Geogrid- Techgrid indegeniously manufactured from selected high tenacity polyester yarn with high molecular weight (>25000 g/mol), and low carboxyl end group(<30mmol/kg) for Reinforced soil wall (Reinforcing Geosynthetic product material of extruded PP geogrids & polyester strips & Geosynthetic & Steel strips not allowed) with granular fill of PHi-32 degree (design is to be carried out in accordance with BS-8006/FHWA)with concrete block (M35)as facia,casting & erection of blocks with techgrid, providing and laying of levelling pad of M15, Providing and laying coping beam (M35),Providing and laying 600mm thick filtermedia etc. completed as per the necessary drawing and instruction of Engineer In Charge. Excluding providing, laying and compacting selected backfill and retained fill behind the wall, excavation and ground improvement, if any. The reinforced earth wall and slope should have 100% coverage of 5m width Knitted and PVC coated polyester Geogrid.(Coating of Geogrid/Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating will not be allowed and will not be accepted)PVC coated polyester geogrid-Techgrid 14 meter to 16 meter | Sqm | 10,440.00 |
Other chapters in this schedule
- Road Works: Loading, Unloading, Carriage Crushing of Materials and Setting (24)
- Road Works: Site Clearance (62)
- Road Works: Earthwork, Erosion Control and Drainage (28)
- Road Works: Granular Sub-Bases, Bases (Non-Bituminous) and Shoulders (21)
- Road Works: Bases and Surface Courses (Bituminous) (13)
- Road Works: Cement Concrete Pavement (32)
- Road Works: Pipe Culverts (16)
- Road Works: Traffic Signs, Markings and Other Road Appurtenances (60)
- Road Works: Foundation (31)
- Road Works: Substructure (36)
- Road Works: Superstructure (32)
- Road Works: Protection Works (20)
- Road Works: Maintenance of Roads (28)
- Road Works: Additional Items (101)
- Bridge Works: Earthwork for Bridges (17)
- Bridge Works: Foundation (85)
- Bridge Works: Substructure (38)
- Bridge Works: Super Structure (39)
- Bridge Works: Protective Works (8)
- Bridge Works: Repair and Rehabilitation (6)
Pricing road works: additional items (new) against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works