R/MIZORAM SOR 2019
Roofing rates
19 roofing items from the Mizoram PWD, effective 2019-02-01.
- Items
- 19
- Lowest rate
- ₹11.00
- Highest rate
- ₹697.20
- Effective from
- 2019-02-01
S-01/RATE ITEMS19 ITEMS
Roofing rates in the Mizoram Schedule of Rates (Volume I) 2019 run from ₹11.00 to ₹697.20. Transcribed from Mizoram PWD — Schedule of Rates 2019 (Volume I), effective 1 February 2019; rates are inclusive of GST for a 5 km lead within Aizawl. For reference only: verify against the official source before pricing a bid.
/
Unit
19 items. Scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 16.01(a) | Providing corrugated G.S. sheet roofing fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses0.80 mm thick with zinc coating not less than 275gm/m² | Sqm | 640.20 |
| 16.01(b) | Providing corrugated G.S. sheet roofing fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses0.63 mm thick with zinc coating not less than 275gm/m² | Sqm | 547.90 |
| 16.02 | Extra for providing and fixing corrugated G.S. sheets vertically or to a pitch exceeding 60 degrees | Sqm | 11.00 |
| 16.03(a) | Extra for providing and fixing curved C.G.S. sheets in roofing0.80 mm thick | Sqm | 14.00 |
| 16.03(b) | Extra for providing and fixing curved C.G.S. sheets in roofing0.63 mm thick | Sqm | 11.40 |
| 16.04(a) | Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40 sq. decimeter for chimney stacks, sky light etc0.80 mm thick | Rmt | 55.80 |
| 16.04(b) | Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40 sq. decimeter for chimney stacks, sky light etc0.63 mm thick | Rmt | 46.50 |
| 16.05(a) | Extra for circular cutting in C.G.S. sheet roofing for making opening of area exceeding 40 square decimeter0.80 mm thick | Rmt | 286.50 |
| 16.05(b) | Extra for circular cutting in C.G.S. sheet roofing for making opening of area exceeding 40 square decimeter0.63 mm thick | Rmt | 286.50 |
| 16.06(a) | Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete0.80 mm thick with zinc coating not less than 275gm/m² | Rmt | 579.70 |
| 16.06(b) | Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete0.63 mm thick with zinc coating not | Rmt | 530.10 |
| 16.07(a) | Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete0.80 mm thick with zinc coating not less than 275gm/m² | Rmt | 597.50 |
| 16.07(b) | Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete0.63 mm thick with zinc coating not less than 275gm/m² | Rmt | 556.20 |
| 16.08 | Providing flat iron bracket 40mm x 3mm with bolts and nuts for holding G.I. sheet and A.C gutters | Nos | 150.40 |
| 16.09 | Providing and fixing wind ties section 40mm x 6mm flat iron section | Rmt | 223.40 |
| 16.12(i) | Providing and fixing of Polyester Coated Galvanised Steel Sheets of any colour ridges, gutters or valleys 50cm overall width 0.50mm thick with 150 mm overlapping fixed with Self Drilling & Tapping Screws with EPDM washer but excluding the cost of baseFor 0.40 mm thick | Sqm | 628.60 |
| 16.12(i)(ii) | Providing and fixing of Polyester Coated Galvanised Steel Sheets of any colour ridges, gutters or valleys 50cm overall width 0.50mm thick with 150 mm overlapping fixed with Self Drilling & Tapping Screws with EPDM washer but excluding the cost of base — For 0.40 mm thickFor 0.50 mm thick | Sqm | 697.20 |
| 16.14 | Providing and fixing 0.90mx3.65m Translucent Fibre 2mm thick sheet roofing with galvanised roof screws with bitumen and G.I limpet washers filled with white lead complete, excluding cost of purlin, rafter and trusses. PRESSED CLAY | Sqm | 483.60 |
| 16.15 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) and finished neat complete | Sqm | 431.00 |
S-02/SOURCE RECORD2019
- ISSUED BY
- Mizoram PWD
- EFFECTIVE
- 2019-02-01
- RETRIEVED
- 2026-07-29
S-03/CHAPTERS21 MORE
Other chapters in this schedule
ARCHED / ESTIMATING
Pricing roofing against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index and catching where rates have moved since the base edition takes time and is easy to get wrong. We can do it for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.