Haryana SOR 2021
Sewerage and Drainage rates
1,019 sewerage and drainage items from the Haryana PWD (Buildings & Roads), effective 2021-03-31.
Sewerage and Drainage rates in the Haryana Haryana Schedule of Rates 2021 run from ₹5.00 to ₹4,10,307.00. Transcribed from Haryana PWD (B&R) — Haryana Schedule of Rates 2021, issued with the approval of the Direction Committee of Chief Engineers, 31 March 2021. Reference only — verify against the official source before pricing a bid.
/
1,019 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 21.1 | Clay puddle, weathered and tempered, laid and consolidated on the flat or on the slope to correct template and levels or thickness as shall be required by the Engineer-in-charge. Note: Only weathered and tempered clay of quality to be approved by the Engineer-in-charge shall be allowed to be used. The rate includes the cost of all forms and shuttering required for the placing and supporting of the puddle and for filling in all cracks and scoured out holes or channels, etc. formed in puddle and finishing to an accurate smooth surface to the plate puddle and finishing to an accurate smooth surface to the plate. A. Dismantling and Demolition | Cum | 319.00 |
| 21.7 | First class flat brick 7. 50 cm thick laid in reimbursements in and on lime mortar on sides of drains and in other work where required over lime concrete or other foundations. All joints to be left completely filled and struck flush | 10 Sqm | 3,600.00 |
| 21.8 | First class flat brick 7.50 cm thick laid in reimbursements in and on 1:4 cement sand mortar as above | 10 Sqm | 3,846.00 |
| 21.9 | First class brick on edge 1 1.50c m thick laid in reimbursements in and on lime mortar on sides of drains and in other work where required over lime concrete or other foundation, all joints to be left complete filled and struck flush | 10 Sqm | 5,189.00 |
| 21.10 | First class brick on edge 11.50 cm thick laid in reimbursements in and on 1: 6 cement sand mortar as above | 10 Sqm | 5,054.00 |
| 21.11 | First class brick on edge 11.50 cm thick laid in reimbursements in and on 1:5 cement sand mortar as above | 10 Sqm | 5,506.00 |
| 21.12 | First class brick on edge 11.50 cm thick laid in reimbursements in and on 1:4 cement sand mortar as above. NOTES: (i) The rates laid down for items 21.5 to 21.12 cover all reimbursements to drains and any strips ribs and edgings of narrow width en-closing areas to be paved with dry brick on edge or on flal The rates also include all extra work involved in laying narrow strips 7.50 cm X 11.50 cm or 23 cm wide only along side the drains and for all curves, bends, slopes and changes of slopes and other works involving added labour or material also for all irregular areas and the cutting, fitting and wastage of bricks required for such work. No extra will be payable for any special difficult or complicated work required to be executed. (ii) In all cases of brick on flat or brick on edge reimbursements of pitching in lime, or cement mortar, a layer of mortar not less than 6mm thick shall be placed underneath the bricks and the bricks shall be embedded therein. This is covered by the rate. All joints between the brick and along outer and inner sides of reimbursements shall be completely filled with mortar. (iii) In the event of cement pointing being ordered in writing to be carried out for any flooring or pitching specified in item 21.3 to 21.12 the appropriate rate laid down for such work in this schedule shall be allowed as an extra otherwise the external surface of the exposed joints shall be struck flush as the work proceeds and left perfectly smooth. (iv) All joints for items 21.3 to 21.12 inclusive shall be specially thin joints not exceeding 5 mm width. (v) The rates laid down above for items 21.3 to 21.12 do not include the cost of the lime concrete brick ballast or other foundations under the flooring and pitching. Flooring and Paving | 10 Sqm | 5,349.00 |
| 21.13 | First class dry flat brick flooring or paving in ordinary bonded courses or in herring bone or other special courses or bond laid to template over rammed and dressed foundation and to correct longitudinal and cross slopes as shall be required by the Engineer-in-charge. All joints shall be thoroughly filled with dry sand grouting which shall be applied to a thickness of not than 20 mm over the surface of the flooring and brushed into the joints. All joints shall be fully filled with sand | 10 Sqm | 3,341.00 |
| 21.14 | First class dry brick on edge flooring or paving in ordinary bounded courses or bound, laid as described in item no.21.13 | 10 Sqm | 5,060.00 |
| 21.15 | First class flat brick paving or flooring laid over and in lime mortar in ordinary bonded courses or in herring bone or other special courses, to templates overdressed foundation and to correct longitudinal and cross slopes as shall be required by the engineer-charge. All joints shall be fiUed with mortar and struck flushed as the work proceeds | 10 Sqm | 3,544.00 |
| 21.16 | First class flat brick paving flooring in cement sand mortar 1:6 laid as described in item no 21.15 | 10 Sqm | 3,450.00 |
| 21.17 | First class flat brick paving or flooring laid over and in cement sand mortar 1:5 laid as described in item No. 21.15 | 10 Sqm | 3,522.00 |
| 21.18 | First class brick on edge paying or flooring laid over and in lime mortar laid as described in item No. 21.15 | 10 Sqm | 4,872.00 |
| 21.19 | First class brick on edge paying or flooring laid over and in Cement sand mortar 1:6 laid as described in item No. 21.15 | 10 Sqm | 4,743.00 |
| 21.20 | First class brick on edge paying or flooring laid over and in Cement sand mortar 1:5 laid as described in item No. 21.15 | 10 Sqm | 4,842.00 |
| 21.21 | First class brick on edge paying or flooring laid over and in Cement sand mortar 1:4 laid as described in item No. 21.15 | 10 Sqm | 4,941.00 |
| 21.22 | Extra over and above the rates for item No 21.13 to 21.21 inclusive for pitching on the slope to sullage drains above cunnetes and to storm water channels etc. where required Notes: (i) The rates laid down for item Nos. 21.13 to 21.22 include the cost of herring bone and other special bonding and curved work, comers, curves, longitudinal and cross slopes, cambers cutting, shaping and wastage of bricks to fit irregular areas and other special works, all bricks shall be laid with best side exposed. (ii) In cases of item Nos.21.13 to 21.14 the rates include for a thin layer of clay or mud plaster from 6mm to 10 mm thick laid to correct templates and levels underneath the bricks which should be carefully set into the mud plaster. (iii) In case of items 21.15 to 21.22 the rats include the provision of homogenous layer of mortar not less than 6 mm thick under the whole of the flooring or paving into which the bricks shall be carefully set and embedded when laid. (iv) The joints of the flooring and paving specified in items 21.15 to 21.22 shall be fine and the maximum width shall not exceed 5 mm. All bricks shall be laid with the best side exposed and the rates cover the cost of cutting and trimming the bricks where necessary in order to ensure good bond and specified fine thickness of joints. (v) In the event of the Engineer-in-charge giving orders in writing for cement pointing to be applied to the exposed surface of any flooring or paving the appropriate rate for such work will be allowed as laid down in the schedule otherwise the external surface of the joints shall be struck flush as the work proceeds and left perfectly smooth. (vi) The rates laid down for items 21.15 to 21.22 do not include the cost of the lime concrete brick ballast or other foundation under the flooring and pitching. (vii) The rates for item No.21.22 includes for any special profiles or strips laid to these specification even though the width of such strips or profiles may be only 11.5 cm or 23 cm and no extra over and above the rates laid down will be paid for such work | 10 Sqm | 140.00 |
| 21.23 | Brick ballast, well or over burnt broken and screened through a 32mm x 32mm square mesh screen laid consolidated and rammed to a finished thickness of 50mm to template and levels to correct longitudinal slopes, cross slopes cambers, etc. under paving or flooring | 10 Sqm | 547.00 |
| 21.24 | Brick ballast, well or over burnt broken and screened through a 32mm x 32mm square mesh screen laid consolidated and rammed to a finished thickness of 75mm as above | 10 Sqm | 820.00 |
| 21.25 | Clay concrete, consisting of 100 parts by volume of well burnt or over burnt brick ballast screened through 32mm x 32mm square mesh screen mixed with 33 parts by volume of fine buddle clay, thoroughly mixed laid, consolidated and rammed to a finished thickness of 50mm to templates and levels and to a correct longitudinal slopes, cross slopes, cambers, etc., under paying or flooring as shall be required by the Engineer-in- charge | 10 Sqm | 518.00 |
| 21.26 | Clay concrete as above but laid consolidated and rammed to a finished thickness of 75mm as above. C. FIXING INCLUDING CARRIAGE | 10 Sqm | 901.00 |
| 21.27.1 | Fixing 560mm, 500mm and 450mm internal diameter circular or 455mm x 610mm clear inside opening rectangular cast iron manhole cover and frame including carriage from the stores of the engineer-in-charge to site of work loading, unloading including stacking and setting the same to correct lines and levels in 1:2 cement sand mortar over manhole etcHeavy duty Circular 560 mm or 500 mm i/d (weight as per I.S.I.) | Each | 406.00 |
| 21.27.2 | Fixing 560mm, 500mm and 450mm internal diameter circular or 455mm x 610mm clear inside opening rectangular cast iron manhole cover and frame including carriage from the stores of the engineer-in-charge to site of work loading, unloading including stacking and setting the same to correct lines and levels in 1:2 cement sand mortar over manhole etcMedium duty Circular 560 mm or 500 mm i/d (weight as per I.S.I.) | Each | 361.00 |
| 21.27.3 | Fixing 560mm, 500mm and 450mm internal diameter circular or 455mm x 610mm clear inside opening rectangular cast iron manhole cover and frame including carriage from the stores of the engineer-in-charge to site of work loading, unloading including stacking and setting the same to correct lines and levels in 1:2 cement sand mortar over manhole etcLight duty rectangular, single seal pattern 1455mm x 610 mm clear inside opening or circular 500 mm or 450 mm dia (weight as per LS.I) | Each | 198.00 |
| 21.28 | Providing & fixing steel bar embedded plastic steps of size 263mm x 165mm of orange colour, confirming to specification in pump chambers, manholes etc., having minimum 3mm thick polypropylene polymer confirming to is:10910 encapsulated on 12mm dia ribbed steel bars per IS: 1786. The rate include cost of setting the same to correct lines and levels duly embedded in 1:2:4 cement concrete including carriage, loading, uploading, stacking, handling, re-handling etc., complete in all respect to the satisfaction of Engineer-in-charge | Each | 334.00 |
| 21.29.1 | Fixing or heavy cast iron automatic siphon with fittings including carriage from the stores of engineer-in-charge to site of works, loading and unloading fixing and setting the same to correct lines and levels in 1:2 cement sand mortar in automatic flushing tanks if required80 mm internal diametre siphon | Each | 603.00 |
| 21.29.2 | Fixing or heavy cast iron automatic siphon with fittings including carriage from the stores of engineer-in-charge to site of works, loading and unloading fixing and setting the same to correct lines and levels in 1:2 cement sand mortar in automatic flushing tanks if required100 mm internal diametre siphon | Each | 723.00 |
| 21.32.1 | Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on new works150 mm internal diametre vent shaft | Metre | 74.00 |
| 21.33.1 | Painting one coat ready mixed paint for metallic surfaces in all shades on new works150 mm internal diametre vent shaft | Metre | 32.00 |
| 21.33.2 | Painting one coat ready mixed paint for metallic surfaces in all shades on new works250 mm internal diametre vent shaft | Metre | 52.00 |
| 21.33.3 | Painting one coat ready mixed paint for metallic surfaces in all shades on new works300 mm internal diametre vent shaft | Metre | 62.00 |
| 21.34.1 | Painting two coats with anti-corrosive bitumastic paint on new work to give an even shade150 mm internal diametre vent shaft | Metre | 66.00 |
| 21.34.2 | Painting two coats with anti-corrosive bitumastic paint on new work to give an even shade250 mm internal diametre vent shaft | Metre | 107.00 |
| 21.34.3 | Painting two coats with anti-corrosive bitumastic paint on new work to give an even shade300 mm internal diametre vent shaft | Metre | 127.00 |
| 21.35.1 | Painting one coat with anti-corrosive bitumastic paint on old work to give an even shade150 mm internal diametre vent shaft | Metre | 31.00 |
| 21.35.2 | Painting one coat with anti-corrosive bitumastic paint on old work to give an even shade250 mm internal diametre vent shaft | Metre | 51.00 |
| 21.35.3 | Painting one coat with anti-corrosive bitumastic paint on old work to give an even shade300 mm internal diametre vent shaft | Metre | 61.00 |
| 21.36 | Finishing R.C.C. vent shafts minimum 200 mm internal diameter with exterior decorative cement based paints on new work two coats to give an even finish | Each | 909.00 |
| 21.37 | Finishing R.C. C. vent shafts as per item No 21.36 above with exterior decorative cement based paints on old work done so as to give an even shade. E. SALT GLAZED STONEWARE PIPE SEWERS AND DRAINS | Each | 778.00 |
| 21.39.1 | Jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1:1 and best white Italian tarred hemp/yam including finishing and trowel ling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes, watering, keeping the joints covered and wetted till the same are cured, testing the sewer lines for leakages and making all leakages and defect good, complete as laid down in the contract specifications100 mm internal diametre of sewer | Joint | 45.00 |
| 21.39.2 | Jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1:1 and best white Italian tarred hemp/yam including finishing and trowel ling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes, watering, keeping the joints covered and wetted till the same are cured, testing the sewer lines for leakages and making all leakages and defect good, complete as laid down in the contract specifications150 mm internal diametre of sewer | Joint | 64.00 |
| 21.39.3 | Jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1:1 and best white Italian tarred hemp/yam including finishing and trowel ling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes, watering, keeping the joints covered and wetted till the same are cured, testing the sewer lines for leakages and making all leakages and defect good, complete as laid down in the contract specifications175 mm internal diametre of sewer | Joint | 73.00 |
| 21.39.4 | Jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1:1 and best white Italian tarred hemp/yam including finishing and trowel ling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes, watering, keeping the joints covered and wetted till the same are cured, testing the sewer lines for leakages and making all leakages and defect good, complete as laid down in the contract specifications200 mm internal diametre of sewer | Joint | 84.00 |
| 21.39.5 | Jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1:1 and best white Italian tarred hemp/yam including finishing and trowel ling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes, watering, keeping the joints covered and wetted till the same are cured, testing the sewer lines for leakages and making all leakages and defect good, complete as laid down in the contract specifications225 mm internal diametre of sewer | Joint | 95.00 |
| 21.39.6 | Jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1:1 and best white Italian tarred hemp/yam including finishing and trowel ling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes, watering, keeping the joints covered and wetted till the same are cured, testing the sewer lines for leakages and making all leakages and defect good, complete as laid down in the contract specifications250 mm internal diametre of sewer | Joint | 122.00 |
| 21.39.7 | Jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1:1 and best white Italian tarred hemp/yam including finishing and trowel ling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes, watering, keeping the joints covered and wetted till the same are cured, testing the sewer lines for leakages and making all leakages and defect good, complete as laid down in the contract specifications300 mm internal diametre of sewer | Joint | 148.00 |
| 21.39.8 | Jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1:1 and best white Italian tarred hemp/yam including finishing and trowel ling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes, watering, keeping the joints covered and wetted till the same are cured, testing the sewer lines for leakages and making all leakages and defect good, complete as laid down in the contract specifications350 mm internal diametre of sewer | Joint | 162.00 |
| 21.39.9 | Jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1:1 and best white Italian tarred hemp/yam including finishing and trowel ling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes, watering, keeping the joints covered and wetted till the same are cured, testing the sewer lines for leakages and making all leakages and defect good, complete as laid down in the contract specifications375 mm internal diametre of sewer | Joint | 174.00 |
| 21.39.10 | Jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1:1 and best white Italian tarred hemp/yam including finishing and trowel ling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes, watering, keeping the joints covered and wetted till the same are cured, testing the sewer lines for leakages and making all leakages and defect good, complete as laid down in the contract specifications400 mm internal diametre of sewer | Joint | 186.00 |
| 21.39.11 | Jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1:1 and best white Italian tarred hemp/yam including finishing and trowel ling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes, watering, keeping the joints covered and wetted till the same are cured, testing the sewer lines for leakages and making all leakages and defect good, complete as laid down in the contract specifications450 mm internal diametre of sewer Notes: (i) The lime concrete in beds, benching and envelopes of all glazed stoneware pipe sewers will be paid for separately according to the measurements of the work carried out to the requirements of the Engineer-in-charge or as shown in the contract drawing, at the rates given in the Schedule of Rates, depending upon the description and specifications of the concrete. All brick ballast must be absolutely clean and free from rubbish dirt, clay etc. (ii) If any cement concrete is ordered by the Engineer-in-charge to be placed in the beds, benching, haunchings of envelopes of any glazed stoneware pipe sewers, the same will be paid for at the rates given in the Schedule of Rates for the respective specifications and description of the concrete work carried out. (iii) No extra over and above the rates of this Scheduled for lime concrete and cement concrete work in beds, benching, haunches and envelopes will be allowed by reasons of any difficulties or wastage in work or for rough shuttering or moulding. (iv) In cases where caps on sockets of branches have to be removed in order to make the joints with the next pipes no extra shall be payable for cutting and re-moving the caps | Joint | 204.00 |
| 21.45.1 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being100 mm internal diametre sewer pipe | Joint | 72.00 |
| 21.45.2 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being150 mm internal diametre sewer pipe | Joint | 96.00 |
| 21.45.3 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being200 mm internal diametre sewer pipe | Joint | 124.00 |
| 21.45.4 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being225 mm internal diametre sewer pipe | Joint | 160.00 |
| 21.45.5 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being250 mm internal diametre sewer pipe | Joint | 181.00 |
| 21.45.6 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being300 mm internal diametre sewer pipe | Joint | 216.00 |
| 21.45.7 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being350 mm internal diametre sewer pipe | Joint | 267.00 |
| 21.45.8 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being400 mm internal diametre sewer pipe | Joint | 311.00 |
| 21.45.9 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being450 mm internal diametre sewer pipe | Joint | 416.00 |
| 21.45.10 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being500 mm internal diametre sewer pipe | Joint | 486.00 |
| 21.45.11 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being600 mm internal diametre sewer pipe | Joint | 575.00 |
| 21.45.12 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being700 mm internal diametre sewer pipe | Joint | 649.00 |
| 21.45.13 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special beingBOO mm internal diametre sewer pipe | Joint | 750.00 |
| 21.45.14 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being900 mm internal diametre sewer pipe | Joint | 850.00 |
| 21.45.15 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being1000 mm internal diametre sewer pipe | Joint | 952.00 |
| 21.45.16 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being1100 mm internal diametre sewer pipe | Joint | 1,067.00 |
| 21.45.17 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being1200 mm internal diametre sewer pipe | Joint | 1,172.00 |
| 21.45.18 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being1400 mm internal diametre sewer pipe | Joint | 1,342.00 |
| 21.45.19 | Jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 ½ cement sand mortar nearty dry heavily caulked into joints and with end dowels filled with 1:1½ cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being1600 mm internal diametre sewer pipe | Joint | 1,506.00 |
| 21.47.1 | Fixing cast iron or stoneware intercepting traps to be supplied by the Engineer-in-charge and embedding the same in cement concrete to the requirements of the Engineer-in-charge in screening chambers including carriage from the stores of the Engineer-in-charge100 mm internal diameter | Each | 296.00 |
| 21.47.2 | Fixing cast iron or stoneware intercepting traps to be supplied by the Engineer-in-charge and embedding the same in cement concrete to the requirements of the Engineer-in-charge in screening chambers including carriage from the stores of the Engineer-in-charge150 mm internal diameter | Each | 326.00 |
| 21.47.3 | Fixing cast iron or stoneware intercepting traps to be supplied by the Engineer-in-charge and embedding the same in cement concrete to the requirements of the Engineer-in-charge in screening chambers including carriage from the stores of the Engineer-in-charge200 mm internal diameter | Each | 445.00 |
| 21.48 | Fixing cast iron road gully grating and frame complete including carriage from the stores of the Engineer-in-charge of the works, loading, fixing and erecting the same in position to correct lines and levels in 1:2 cement sand mortar and painting of grating and frame with coal tar | Each | 297.00 |
| 21.52 | Constructing standard drain, type house connection complete consisting of concrete drain moulded and laid over lime concrete foundation rendered and finished smooth with 6mm thick rendering concrete to be of 1:3:6 parts by volume of cement sand stone bajri and rendering to be 1: 1 cement sand mortar | Metre | 144.00 |
| 21.53 | Constructing standard drain type I drain moulded and laid over lime concrete foundation rendered and finished smooth with 6 mm thick rendering concrete to be of 1 136 parts by volume of cement sand stone bajri and rendering to be 1:1 cement sand mortar | Metre | 179.00 |
| 21.54 | Constructing standard drain type II drain complete consisting of cement concrete drain moulded and laid over lime concrete foundation rendered and finished smooth with 6 mm thick rendering concrete to be 1:3:6 Paris by volume of cement sand stone Bajri and rendering to be 1:1 cement and mortar | Metre | 407.00 |
| 21.55 | Constructing standard drain type II drain complete consisting of concrete drain moulded and laid concrete foundation, rendered and smooth with 6mm thick rendering concrete to be of I:3:6 parts by volume of cement sand stone bajri and rendering to be 1: 1 cement sand mortar | Metre | 478.00 |
| 21.56 | Constructing standard drain IV type drain complete consisting of concrete drain moulded and laid concrete foundation rendered and smooth with 6 mm thick rendering concrete to be of 1: 3: 6 by parts volume of cement sand stone bajri and rendering to be 1: 1 cement sand mortar. Notes: (i) The rates given above for the type drains include in all cases for the cost of the excavation for the drain below level of top of cunnette, the timbering, shoring dewatering and dressing of the excavation to correct template and levels, the removal and disposal of all surplus soil and refilling if any as described under the head Earth work, the cost of lime concrete in foundation of the drains and of all setting out apparatus required for the work. The rates also include the cost of all curves, bends, falls junctions inlets, outlets and all other special work in the drains and expansion joints. For drains where precast slabs are used, the rate includes for fixing and setting to correct level and templates in 1:2 cement mortar, the joint being finished perfectly smooth with the faces of the slabs. (ii) All surface drains shall be finished perfectly smooth by rubbing with properly shaped steel finishing tools and the design of all tools and appliances moulds and templates and used on the construction of the drains shall be to the approval of the Engineer-in charge of the work. (iii) All precast slabs shall be cured by immersion for 10 days under water before use and all cement concrete drains moulded in site shall be flooded with water up to the tops of the bull nose edging for 10 days after construction to ensure that all concrete is thoroughly seasoned. (iv) The rates for items item 21.49, 21.50 and 21.51 house outlet connections include for all work from the plinth of the house up to the street drain where this is adjacent to the house wall, if the street drain is away from the wall the appropriate length of the house connection drain will be paid for. The rates also include for cutting Jharris in the house wall and reimbursement of the drains for forming pamalas where required and plastering the same. H. Masonry Plugs | Metre | 573.00 |
| 21.57.1.1 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter100mm | Each | 5.00 |
| 21.57.1.2 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter150 mm | Each | 10.00 |
| 21.57.1.3 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter175 mm | Each | 15.00 |
| 21.57.1.4 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter200mm | Each | 20.00 |
| 21.57.1.5 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter225mm | Each | 21.00 |
| 21.57.1.6 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter250mm | Each | 26.00 |
| 21.57.1.7 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter300mm | Each | 41.00 |
| 21.57.1.8 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter350mm | Each | 56.00 |
| 21.57.1.9 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter375mm | Each | 57.00 |
| 21.57.1.10 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter400mm | Each | 72.00 |
| 21.57.1.11 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter450mm | Each | 92.00 |
| 21.57.1.12 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter500mm | Each | 104.00 |
| 21.57.1.13 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter600mm | Each | 154.00 |
| 21.57.1.14 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter685mm | Each | 204.00 |
| 21.57.1.15 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter700mm | Each | 207.00 |
| 21.57.1.16 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter760mm | Each | 255.00 |
| 21.57.1.17 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter800mm | Each | 303.00 |
| 21.57.1.18 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter840mm | Each | 307.00 |
| 21.57.1.19 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter900mm | Each | 357.00 |
| 21.57.1.20 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter915m m | Each | 404.00 |
| 21.57.1.21 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter990mm | Each | 457.00 |
| 21.57.1.22 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1000m m | Each | 458.00 |
| 21.57.1.23 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1065 mm | Each | 509.00 |
| 21.57.1.24 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1100m m | Each | 558.00 |
| 21.57.1.25 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1145m m | Each | 611.00 |
| 21.57.1.26 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1200m m | Each | 660.00 |
| 21.57.1.27 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1220m m | Each | 663.00 |
| 21.57.1.28 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1295 mm | Each | 764.00 |
| 21.57.1.29 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1370m m | Each | 861.00 |
| 21.57.1.30 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1400m m | Each | 868.00 |
| 21.57.1.31 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1450m m | Each | 966.00 |
| 21.57.1.32 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1525 mm | Each | 1,066.00 |
| 21.57.1.33 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1600m m | Each | 1,168.00 |
| 21.57.1.34 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1680m m | Each | 1,273.00 |
| 21.57.1.35 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1755 mm | Each | 1,421.00 |
| 21.57.1.36 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1800m m | Each | 1,475.00 |
| 21.57.1.37 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Circual r sewers having internal diameter1830 mm | Each | 1,527.00 |
| 21.57.2.1 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Egg Shaped sewers having inside dimensions610m m x 915m m | Each | 252.00 |
| 21.57.2.2 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Egg Shaped sewers having inside dimensions660m m x 990m m | Each | 258.00 |
| 21.57.2.3 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Egg Shaped sewers having inside dimensions710m mx1065m m | Each | 308.00 |
| 21.57.2.4 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Egg Shaped sewers having inside dimensions760m mx1140m m | Each | 358.00 |
| 21.57.2.5 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Egg Shaped sewers having inside dimensions810m mx1215m m | Each | 409.00 |
| 21.57.2.6 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Egg Shaped sewers having inside dimensions860m m x 1290m m | Each | 461.00 |
| 21.57.2.7 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Egg Shaped sewers having inside dimensions910m m x 1365m m | Each | 556.00 |
| 21.57.2.8 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Egg Shaped sewers having inside dimensions970 mmx 1455 mm | Each | 610.00 |
| 21.57.2.9 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Egg Shaped sewers having inside dimensions1020 mm x 1530 mm | Each | 662.00 |
| 21.57.2.10 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Egg Shaped sewers having inside dimensions1070 mm x 1605mm | Each | 759.00 |
| 21.57.2.11 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Egg Shaped sewers having inside dimensions1120mm x1680 mm | Each | 812.00 |
| 21.57.2.12 | Providing masonry plugs to ends of sewers of all types with 11.43c m thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge) — For Egg Shaped sewers having inside dimensions1170mm x 1755mm I. BRICK SEWERS (EGG-SHAPED) | Each | 866.00 |
| 21.59.1 | Construction of standard new egg shaped type sewers as per standard drawings as described in item 21.58 above but with 1:2:9:24 cement lime sand concrete with stone ballast of 20mm gauge in beds, sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg shaped sewer being610 mm x 915 mm | Metre | 9,484.00 |
| 21.59.2 | Construction of standard new egg shaped type sewers as per standard drawings as described in item 21.58 above but with 1:2:9:24 cement lime sand concrete with stone ballast of 20mm gauge in beds, sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg shaped sewer being660 mm x 990 mm | Metre | 9,735.00 |
| 21.59.3 | Construction of standard new egg shaped type sewers as per standard drawings as described in item 21.58 above but with 1:2:9:24 cement lime sand concrete with stone ballast of 20mm gauge in beds, sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg shaped sewer being710 mm x 1065 mm | Metre | 10,045.00 |
| 21.59.4 | Construction of standard new egg shaped type sewers as per standard drawings as described in item 21.58 above but with 1:2:9:24 cement lime sand concrete with stone ballast of 20mm gauge in beds, sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg shaped sewer being760 mm x 1140 mm | Metre | 10,359.00 |
| 21.59.5 | Construction of standard new egg shaped type sewers as per standard drawings as described in item 21.58 above but with 1:2:9:24 cement lime sand concrete with stone ballast of 20mm gauge in beds, sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg shaped sewer being810 mm x 1215 mm | Metre | 10,679.00 |
| 21.59.6 | Construction of standard new egg shaped type sewers as per standard drawings as described in item 21.58 above but with 1:2:9:24 cement lime sand concrete with stone ballast of 20mm gauge in beds, sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg shaped sewer being860 mm x 1290 mm | Metre | 11,071.00 |
| 21.59.7 | Construction of standard new egg shaped type sewers as per standard drawings as described in item 21.58 above but with 1:2:9:24 cement lime sand concrete with stone ballast of 20mm gauge in beds, sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg shaped sewer being910 mm x 1365 mm | Metre | 11,364.00 |
| 21.59.8 | Construction of standard new egg shaped type sewers as per standard drawings as described in item 21.58 above but with 1:2:9:24 cement lime sand concrete with stone ballast of 20mm gauge in beds, sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg shaped sewer being970 mm x 1455 mm | Metre | 11,640.00 |
| 21.59.9 | Construction of standard new egg shaped type sewers as per standard drawings as described in item 21.58 above but with 1:2:9:24 cement lime sand concrete with stone ballast of 20mm gauge in beds, sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg shaped sewer being1020 mm x 1530 mm | Metre | 11,989.00 |
| 21.59.10 | Construction of standard new egg shaped type sewers as per standard drawings as described in item 21.58 above but with 1:2:9:24 cement lime sand concrete with stone ballast of 20mm gauge in beds, sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg shaped sewer being1070 mm x 1605 mm | Metre | 12,316.00 |
| 21.59.11 | Construction of standard new egg shaped type sewers as per standard drawings as described in item 21.58 above but with 1:2:9:24 cement lime sand concrete with stone ballast of 20mm gauge in beds, sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg shaped sewer being1120 mm x 1680 mm | Metre | 12,640.00 |
| 21.59.12 | Construction of standard new egg shaped type sewers as per standard drawings as described in item 21.58 above but with 1:2:9:24 cement lime sand concrete with stone ballast of 20mm gauge in beds, sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg shaped sewer being1170 mm x 1755 mm | Metre | 13,065.00 |
| 21.60.1 | Extra over and above the rates for item No. 21.58 and 21.59 above for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside dimensions of egg shaped sewer being610 mmx915 mm | Metre | 60.00 |
| 21.60.2 | Extra over and above the rates for item No. 21.58 and 21.59 above for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside dimensions of egg shaped sewer being660 mm x 990 mm | Metre | 62.00 |
| 21.60.3 | Extra over and above the rates for item No. 21.58 and 21.59 above for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside dimensions of egg shaped sewer being710 mmx1065 mm | Metre | 66.00 |
| 21.60.4 | Extra over and above the rates for item No. 21.58 and 21.59 above for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside dimensions of egg shaped sewer being760 mmx1140 mm | Metre | 69.00 |
| 21.60.5 | Extra over and above the rates for item No. 21.58 and 21.59 above for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside dimensions of egg shaped sewer being810 mmx1215 mm | Metre | 73.00 |
| 21.60.6 | Extra over and above the rates for item No. 21.58 and 21.59 above for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside dimensions of egg shaped sewer being860 mmx1290 mm | Metre | 78.00 |
| 21.60.7 | Extra over and above the rates for item No. 21.58 and 21.59 above for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside dimensions of egg shaped sewer being910 mmx1365 mm | Metre | 81.00 |
| 21.60.8 | Extra over and above the rates for item No. 21.58 and 21.59 above for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside dimensions of egg shaped sewer being970 mmx1455 mm | Metre | 84.00 |
| 21.60.9 | Extra over and above the rates for item No. 21.58 and 21.59 above for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside dimensions of egg shaped sewer being1020 mmx1530 mm | Metre | 88.00 |
| 21.60.10 | Extra over and above the rates for item No. 21.58 and 21.59 above for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside dimensions of egg shaped sewer being1070 mmx1605 mm | Metre | 92.00 |
| 21.60.11 | Extra over and above the rates for item No. 21.58 and 21.59 above for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside dimensions of egg shaped sewer being1120 mmx1680 mm | Metre | 95.00 |
| 21.60.12 | Extra over and above the rates for item No. 21.58 and 21.59 above for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside dimensions of egg shaped sewer being1170 mm x 1755mm | Metre | 100.00 |
| 21.61.7.1 | Construction of standard new-egg-shaped sewers as per standard drawing built up to 213rd height only (as constructed in manhole lengths) where the invert level of the sewer is up to 1.5 meters below G.L. including dressing of beds and sides of trenches to exact profiles, grades and alignments, lime concrete or cement lime sand concrete in beds and sides with 1:3 cement sand collar joint not less than 12 mm thick on side 1:1½:3 moulded cement concrete invert accurately finished with neat cement rendering face specially hand moulded first class radiated brick work laid in 1:3 cement sand mortar in the sides of the sewer with the entire inner surface of the sewer rendered with neat cement not less than 12 mm thick of 1:2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to template finished with two coats of sodium silicate wherever required. The rate includes the cost of accurately planed and fitted centring and moulds and supports for all works as well as for all curves bends falls and other special works and cleaning out of the sewer throughout their length. Sodium silicate shall be supplied free of cost at the stores of the Engineer-in-charge — State 910 mm x 1365 mmCost with lime concrete | Metre | 3,331.00 |
| 21.61.7.2 | Construction of standard new-egg-shaped sewers as per standard drawing built up to 213rd height only (as constructed in manhole lengths) where the invert level of the sewer is up to 1.5 meters below G.L. including dressing of beds and sides of trenches to exact profiles, grades and alignments, lime concrete or cement lime sand concrete in beds and sides with 1:3 cement sand collar joint not less than 12 mm thick on side 1:1½:3 moulded cement concrete invert accurately finished with neat cement rendering face specially hand moulded first class radiated brick work laid in 1:3 cement sand mortar in the sides of the sewer with the entire inner surface of the sewer rendered with neat cement not less than 12 mm thick of 1:2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to template finished with two coats of sodium silicate wherever required. The rate includes the cost of accurately planed and fitted centring and moulds and supports for all works as well as for all curves bends falls and other special works and cleaning out of the sewer throughout their length. Sodium silicate shall be supplied free of cost at the stores of the Engineer-in-charge — State 910 mm x 1365 mmCost with cement lime sand concrete | Metre | 3,489.00 |
| 21.62.1 | Construction of standard new egg-shaped type sewer as per standard drawing built up to 213rd height only (as constructed in manhole lengths) as per described in item No. 29.61 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg-shaped sewer being610mm x 915mm | Metre | 2,629.00 |
| 21.62.2 | Construction of standard new egg-shaped type sewer as per standard drawing built up to 213rd height only (as constructed in manhole lengths) as per described in item No. 29.61 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg-shaped sewer being660mm x 990mm | Metre | 2,845.00 |
| 21.62.3 | Construction of standard new egg-shaped type sewer as per standard drawing built up to 213rd height only (as constructed in manhole lengths) as per described in item No. 29.61 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg-shaped sewer being710mm x 1065mm | Metre | 3,005.00 |
| 21.62.4 | Construction of standard new egg-shaped type sewer as per standard drawing built up to 213rd height only (as constructed in manhole lengths) as per described in item No. 29.61 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg-shaped sewer being760mm x 1140mm | Metre | 3,165.00 |
| 21.62.5 | Construction of standard new egg-shaped type sewer as per standard drawing built up to 213rd height only (as constructed in manhole lengths) as per described in item No. 29.61 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg-shaped sewer being810mm x 1215mm | Metre | 3,330.00 |
| 21.62.6 | Construction of standard new egg-shaped type sewer as per standard drawing built up to 213rd height only (as constructed in manhole lengths) as per described in item No. 29.61 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg-shaped sewer being860mm x 1290mm | Metre | 3,565.00 |
| 21.62.7 | Construction of standard new egg-shaped type sewer as per standard drawing built up to 213rd height only (as constructed in manhole lengths) as per described in item No. 29.61 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg-shaped sewer being910mm x 1365mm | Metre | 3,725.00 |
| 21.62.8 | Construction of standard new egg-shaped type sewer as per standard drawing built up to 213rd height only (as constructed in manhole lengths) as per described in item No. 29.61 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg-shaped sewer being970mm x 1455mm | Metre | 3,885.00 |
| 21.62.9 | Construction of standard new egg-shaped type sewer as per standard drawing built up to 213rd height only (as constructed in manhole lengths) as per described in item No. 29.61 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg-shaped sewer being1020mm x 1530mm | Metre | 4,075.00 |
| 21.62.10 | Construction of standard new egg-shaped type sewer as per standard drawing built up to 213rd height only (as constructed in manhole lengths) as per described in item No. 29.61 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg-shaped sewer being1070mm x 1605mm | Metre | 4,287.00 |
| 21.62.11 | Construction of standard new egg-shaped type sewer as per standard drawing built up to 213rd height only (as constructed in manhole lengths) as per described in item No. 29.61 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg-shaped sewer being1120mm x 1680mm | Metre | 4,451.00 |
| 21.62.12 | Construction of standard new egg-shaped type sewer as per standard drawing built up to 213rd height only (as constructed in manhole lengths) as per described in item No. 29.61 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside dimensions of egg-shaped sewer being1170mm x 1755mm | Metre | 4,641.00 |
| 21.63.1 | Extra over and above the rate for item No. 21.61 and 21.62 for every additional 4 meters depth or part there of for depth of the invert level beyond 1.5 meters below ground level. The finished inside dimensions of egg-shaped sewer being610mm x 915mm | Metre | 28.00 |
| 21.63.2 | Extra over and above the rate for item No. 21.61 and 21.62 for every additional 4 meters depth or part there of for depth of the invert level beyond 1.5 meters below ground level. The finished inside dimensions of egg-shaped sewer being660mm x 990mm | Metre | 31.00 |
| 21.63.3 | Extra over and above the rate for item No. 21.61 and 21.62 for every additional 4 meters depth or part there of for depth of the invert level beyond 1.5 meters below ground level. The finished inside dimensions of egg-shaped sewer being710mm x 1065mm | Metre | 33.00 |
| 21.63.4 | Extra over and above the rate for item No. 21.61 and 21.62 for every additional 4 meters depth or part there of for depth of the invert level beyond 1.5 meters below ground level. The finished inside dimensions of egg-shaped sewer being760mm x 1140mm | Metre | 34.00 |
| 21.63.5 | Extra over and above the rate for item No. 21.61 and 21.62 for every additional 4 meters depth or part there of for depth of the invert level beyond 1.5 meters below ground level. The finished inside dimensions of egg-shaped sewer being810mm x 1215mm | Metre | 36.00 |
| 21.63.6 | Extra over and above the rate for item No. 21.61 and 21.62 for every additional 4 meters depth or part there of for depth of the invert level beyond 1.5 meters below ground level. The finished inside dimensions of egg-shaped sewer being860mm x 1290mm | Metre | 39.00 |
| 21.63.7 | Extra over and above the rate for item No. 21.61 and 21.62 for every additional 4 meters depth or part there of for depth of the invert level beyond 1.5 meters below ground level. The finished inside dimensions of egg-shaped sewer being910mm x 1365mm | Metre | 40.00 |
| 21.63.8 | Extra over and above the rate for item No. 21.61 and 21.62 for every additional 4 meters depth or part there of for depth of the invert level beyond 1.5 meters below ground level. The finished inside dimensions of egg-shaped sewer being970mm x 1455mm | Metre | 42.00 |
| 21.63.9 | Extra over and above the rate for item No. 21.61 and 21.62 for every additional 4 meters depth or part there of for depth of the invert level beyond 1.5 meters below ground level. The finished inside dimensions of egg-shaped sewer being1020mm x 1530mm | Metre | 44.00 |
| 21.63.10 | Extra over and above the rate for item No. 21.61 and 21.62 for every additional 4 meters depth or part there of for depth of the invert level beyond 1.5 meters below ground level. The finished inside dimensions of egg-shaped sewer being1070mm x 1605mm | Metre | 47.00 |
| 21.63.11 | Extra over and above the rate for item No. 21.61 and 21.62 for every additional 4 meters depth or part there of for depth of the invert level beyond 1.5 meters below ground level. The finished inside dimensions of egg-shaped sewer being1120mm x 1680mm | Metre | 48.00 |
| 21.63.12 | Extra over and above the rate for item No. 21.61 and 21.62 for every additional 4 meters depth or part there of for depth of the invert level beyond 1.5 meters below ground level. The finished inside dimensions of egg-shaped sewer being1170mm x 1755mm per J. BRICK SEWERS | Metre | 50.00 |
| 21.65.1 | Construction of brick circular non pressure type sewer as per standard drawing as per described in item no. 21.64 above but with 1: 2:9:24 cement lime sand concrete with stone ballast 20 mm gauge in beds sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being760 mm | Metre | 4,578.00 |
| 21.65.2 | Construction of brick circular non pressure type sewer as per standard drawing as per described in item no. 21.64 above but with 1: 2:9:24 cement lime sand concrete with stone ballast 20 mm gauge in beds sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being840 mm | Metre | 4,974.00 |
| 21.65.3 | Construction of brick circular non pressure type sewer as per standard drawing as per described in item no. 21.64 above but with 1: 2:9:24 cement lime sand concrete with stone ballast 20 mm gauge in beds sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being915 mm | Metre | 5,352.00 |
| 21.65.4 | Construction of brick circular non pressure type sewer as per standard drawing as per described in item no. 21.64 above but with 1: 2:9:24 cement lime sand concrete with stone ballast 20 mm gauge in beds sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being990mm | Metre | 6,036.00 |
| 21.65.5 | Construction of brick circular non pressure type sewer as per standard drawing as per described in item no. 21.64 above but with 1: 2:9:24 cement lime sand concrete with stone ballast 20 mm gauge in beds sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being1065mm | Metre | 6,297.00 |
| 21.65.6 | Construction of brick circular non pressure type sewer as per standard drawing as per described in item no. 21.64 above but with 1: 2:9:24 cement lime sand concrete with stone ballast 20 mm gauge in beds sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being1145m m | Metre | 6,878.00 |
| 21.65.7 | Construction of brick circular non pressure type sewer as per standard drawing as per described in item no. 21.64 above but with 1: 2:9:24 cement lime sand concrete with stone ballast 20 mm gauge in beds sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being1220mm | Metre | 7,358.00 |
| 21.65.8 | Construction of brick circular non pressure type sewer as per standard drawing as per described in item no. 21.64 above but with 1: 2:9:24 cement lime sand concrete with stone ballast 20 mm gauge in beds sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being1295mm | Metre | 7,739.00 |
| 21.65.9 | Construction of brick circular non pressure type sewer as per standard drawing as per described in item no. 21.64 above but with 1: 2:9:24 cement lime sand concrete with stone ballast 20 mm gauge in beds sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being1370 mm | Metre | 8,921.00 |
| 21.65.10 | Construction of brick circular non pressure type sewer as per standard drawing as per described in item no. 21.64 above but with 1: 2:9:24 cement lime sand concrete with stone ballast 20 mm gauge in beds sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being1450mm | Metre | 9,476.00 |
| 21.65.11 | Construction of brick circular non pressure type sewer as per standard drawing as per described in item no. 21.64 above but with 1: 2:9:24 cement lime sand concrete with stone ballast 20 mm gauge in beds sides and haunches in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being1525mm | Metre | 9,763.00 |
| 21.66.1 | Extra over and above the rate for item no. 21.64 and 21.65 for every additional 4 metre depth or part thereof for depth of invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being760mm | Metre | 56.00 |
| 21.66.2 | Extra over and above the rate for item no. 21.64 and 21.65 for every additional 4 metre depth or part thereof for depth of invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being840mm | Metre | 61.00 |
| 21.66.3 | Extra over and above the rate for item no. 21.64 and 21.65 for every additional 4 metre depth or part thereof for depth of invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being915mm | Metre | 65.00 |
| 21.66.4 | Extra over and above the rate for item no. 21.64 and 21.65 for every additional 4 metre depth or part thereof for depth of invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being990mm | Metre | 72.00 |
| 21.66.5 | Extra over and above the rate for item no. 21.64 and 21.65 for every additional 4 metre depth or part thereof for depth of invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being1065mm | Metre | 76.00 |
| 21.66.6 | Extra over and above the rate for item no. 21.64 and 21.65 for every additional 4 metre depth or part thereof for depth of invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being1145m m | Metre | 83.00 |
| 21.66.7 | Extra over and above the rate for item no. 21.64 and 21.65 for every additional 4 metre depth or part thereof for depth of invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being122 0mm | Metre | 89.00 |
| 21.66.8 | Extra over and above the rate for item no. 21.64 and 21.65 for every additional 4 metre depth or part thereof for depth of invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being1 295mm | Metre | 93.00 |
| 21.66.9 | Extra over and above the rate for item no. 21.64 and 21.65 for every additional 4 metre depth or part thereof for depth of invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being1370 mm | Metre | 106.00 |
| 21.66.10 | Extra over and above the rate for item no. 21.64 and 21.65 for every additional 4 metre depth or part thereof for depth of invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being1450m m | Metre | 114.00 |
| 21.66.11 | Extra over and above the rate for item no. 21.64 and 21.65 for every additional 4 metre depth or part thereof for depth of invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being1525mm | Metre | 116.00 |
| 21.68.1 | Construction of brick circular non-pressure type sewers as per standard drawings built up one half height only (as constructed in manhole lengths) as per described in item no.21.67 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being760mm | Metre | 2,280.00 |
| 21.68.2 | Construction of brick circular non-pressure type sewers as per standard drawings built up one half height only (as constructed in manhole lengths) as per described in item no.21.67 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being840mm | Metre | 2,492.00 |
| 21.68.3 | Construction of brick circular non-pressure type sewers as per standard drawings built up one half height only (as constructed in manhole lengths) as per described in item no.21.67 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being915mm | Metre | 2,760.00 |
| 21.68.4 | Construction of brick circular non-pressure type sewers as per standard drawings built up one half height only (as constructed in manhole lengths) as per described in item no.21.67 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being990mm | Metre | 3,055.00 |
| 21.68.5 | Construction of brick circular non-pressure type sewers as per standard drawings built up one half height only (as constructed in manhole lengths) as per described in item no.21.67 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being1065mm | Metre | 3,219.00 |
| 21.68.6 | Construction of brick circular non-pressure type sewers as per standard drawings built up one half height only (as constructed in manhole lengths) as per described in item no.21.67 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being1145 mm | Metre | 3,664.00 |
| 21.68.7 | Construction of brick circular non-pressure type sewers as per standard drawings built up one half height only (as constructed in manhole lengths) as per described in item no.21.67 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being1220mm | Metre | 3,936.00 |
| 21.68.8 | Construction of brick circular non-pressure type sewers as per standard drawings built up one half height only (as constructed in manhole lengths) as per described in item no.21.67 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being1295mm | Metre | 4,157.00 |
| 21.68.9 | Construction of brick circular non-pressure type sewers as per standard drawings built up one half height only (as constructed in manhole lengths) as per described in item no.21.67 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being1370m m | Metre | 4,379.00 |
| 21.68.10 | Construction of brick circular non-pressure type sewers as per standard drawings built up one half height only (as constructed in manhole lengths) as per described in item no.21.67 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being1450mm | Metre | 4,554.00 |
| 21.68.11 | Construction of brick circular non-pressure type sewers as per standard drawings built up one half height only (as constructed in manhole lengths) as per described in item no.21.67 above but with 1:2:9:24 cement lime sand concrete with stone ballast 20mm gauge in beds and sides in place of lime concrete or cement lime sand concrete with brick ballast. The finished inside diameter of sewer being1525mm | Metre | 4,801.00 |
| 21.69.1 | Extra over and above the rates for item No. 21.67 and 21.68 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5m etres below ground level.T he finished inside diameter of sewer being760mm | Metre | 23.00 |
| 21.69.2 | Extra over and above the rates for item No. 21.67 and 21.68 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5m etres below ground level.T he finished inside diameter of sewer being840mm | Metre | 25.00 |
| 21.69.3 | Extra over and above the rates for item No. 21.67 and 21.68 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5m etres below ground level.T he finished inside diameter of sewer being915mm | Metre | 28.00 |
| 21.69.4 | Extra over and above the rates for item No. 21.67 and 21.68 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5m etres below ground level.T he finished inside diameter of sewer being990mm | Metre | 31.00 |
| 21.69.5 | Extra over and above the rates for item No. 21.67 and 21.68 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5m etres below ground level.T he finished inside diameter of sewer being1065mm | Metre | 33.00 |
| 21.69.6 | Extra over and above the rates for item No. 21.67 and 21.68 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5m etres below ground level.T he finished inside diameter of sewer being1145 mm | Metre | 38.00 |
| 21.69.7 | Extra over and above the rates for item No. 21.67 and 21.68 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5m etres below ground level.T he finished inside diameter of sewer being1220mm | Metre | 41.00 |
| 21.69.8 | Extra over and above the rates for item No. 21.67 and 21.68 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5m etres below ground level.T he finished inside diameter of sewer being1295mm | Metre | 43.00 |
| 21.69.9 | Extra over and above the rates for item No. 21.67 and 21.68 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5m etres below ground level.T he finished inside diameter of sewer being1370m m | Metre | 45.00 |
| 21.69.10 | Extra over and above the rates for item No. 21.67 and 21.68 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5m etres below ground level.T he finished inside diameter of sewer being1450mm | Metre | 47.00 |
| 21.69.11 | Extra over and above the rates for item No. 21.67 and 21.68 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5m etres below ground level.T he finished inside diameter of sewer being1525mm per K. RCC cum Brick Circular Sewer | Metre | 50.00 |
| 21.70.1 | Construction of R.C.C. cum brick circular (pressure type) sewer with full section without triangular portion concrete in bed as per standard drawings where the invert level of the sewer is 1. 5 metres below ground level including dressing of beds and sides of trenches to exact profiles, grades and alignments, cement concrete 1: 3:6 in beds and sides, RC C. ring of cement concrete 1:24:, Specially hand moulded 1st class radiated brick work laid in 1:3 cement sand mortar in the inner and outer arch rings of the sewers and with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to template finished with two coats of sodium silicate wherever required. The rates include the cost of accurately planed and fitted centring moulds and supports for all works as well as for all curves, bends, falls and other special work and cleaning out the sewer throughout their lengths. Sodium silicate and steel will be supplied free of cost at the stores of the Engineer- in-charge760mm | Metre | 8.00 |
| 21.70.2 | Construction of R.C.C. cum brick circular (pressure type) sewer with full section without triangular portion concrete in bed as per standard drawings where the invert level of the sewer is 1. 5 metres below ground level including dressing of beds and sides of trenches to exact profiles, grades and alignments, cement concrete 1: 3:6 in beds and sides, RC C. ring of cement concrete 1:24:, Specially hand moulded 1st class radiated brick work laid in 1:3 cement sand mortar in the inner and outer arch rings of the sewers and with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to template finished with two coats of sodium silicate wherever required. The rates include the cost of accurately planed and fitted centring moulds and supports for all works as well as for all curves, bends, falls and other special work and cleaning out the sewer throughout their lengths. Sodium silicate and steel will be supplied free of cost at the stores of the Engineer- in-charge840mm | Metre | 6,497.00 |
| 21.70.3 | Construction of R.C.C. cum brick circular (pressure type) sewer with full section without triangular portion concrete in bed as per standard drawings where the invert level of the sewer is 1. 5 metres below ground level including dressing of beds and sides of trenches to exact profiles, grades and alignments, cement concrete 1: 3:6 in beds and sides, RC C. ring of cement concrete 1:24:, Specially hand moulded 1st class radiated brick work laid in 1:3 cement sand mortar in the inner and outer arch rings of the sewers and with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to template finished with two coats of sodium silicate wherever required. The rates include the cost of accurately planed and fitted centring moulds and supports for all works as well as for all curves, bends, falls and other special work and cleaning out the sewer throughout their lengths. Sodium silicate and steel will be supplied free of cost at the stores of the Engineer- in-charge915mm | Metre | 7,074.00 |
| 21.70.4 | Construction of R.C.C. cum brick circular (pressure type) sewer with full section without triangular portion concrete in bed as per standard drawings where the invert level of the sewer is 1. 5 metres below ground level including dressing of beds and sides of trenches to exact profiles, grades and alignments, cement concrete 1: 3:6 in beds and sides, RC C. ring of cement concrete 1:24:, Specially hand moulded 1st class radiated brick work laid in 1:3 cement sand mortar in the inner and outer arch rings of the sewers and with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to template finished with two coats of sodium silicate wherever required. The rates include the cost of accurately planed and fitted centring moulds and supports for all works as well as for all curves, bends, falls and other special work and cleaning out the sewer throughout their lengths. Sodium silicate and steel will be supplied free of cost at the stores of the Engineer- in-charge990mm | Metre | 7,623.00 |
| 21.70.5 | Construction of R.C.C. cum brick circular (pressure type) sewer with full section without triangular portion concrete in bed as per standard drawings where the invert level of the sewer is 1. 5 metres below ground level including dressing of beds and sides of trenches to exact profiles, grades and alignments, cement concrete 1: 3:6 in beds and sides, RC C. ring of cement concrete 1:24:, Specially hand moulded 1st class radiated brick work laid in 1:3 cement sand mortar in the inner and outer arch rings of the sewers and with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to template finished with two coats of sodium silicate wherever required. The rates include the cost of accurately planed and fitted centring moulds and supports for all works as well as for all curves, bends, falls and other special work and cleaning out the sewer throughout their lengths. Sodium silicate and steel will be supplied free of cost at the stores of the Engineer- in-charge1065mm | Metre | 8,125.00 |
| 21.70.6 | Construction of R.C.C. cum brick circular (pressure type) sewer with full section without triangular portion concrete in bed as per standard drawings where the invert level of the sewer is 1. 5 metres below ground level including dressing of beds and sides of trenches to exact profiles, grades and alignments, cement concrete 1: 3:6 in beds and sides, RC C. ring of cement concrete 1:24:, Specially hand moulded 1st class radiated brick work laid in 1:3 cement sand mortar in the inner and outer arch rings of the sewers and with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to template finished with two coats of sodium silicate wherever required. The rates include the cost of accurately planed and fitted centring moulds and supports for all works as well as for all curves, bends, falls and other special work and cleaning out the sewer throughout their lengths. Sodium silicate and steel will be supplied free of cost at the stores of the Engineer- in-charge1145m m | Metre | 9,205.00 |
| 21.70.7 | Construction of R.C.C. cum brick circular (pressure type) sewer with full section without triangular portion concrete in bed as per standard drawings where the invert level of the sewer is 1. 5 metres below ground level including dressing of beds and sides of trenches to exact profiles, grades and alignments, cement concrete 1: 3:6 in beds and sides, RC C. ring of cement concrete 1:24:, Specially hand moulded 1st class radiated brick work laid in 1:3 cement sand mortar in the inner and outer arch rings of the sewers and with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to template finished with two coats of sodium silicate wherever required. The rates include the cost of accurately planed and fitted centring moulds and supports for all works as well as for all curves, bends, falls and other special work and cleaning out the sewer throughout their lengths. Sodium silicate and steel will be supplied free of cost at the stores of the Engineer- in-charge1220mm | Metre | 9,760.00 |
| 21.70.8 | Construction of R.C.C. cum brick circular (pressure type) sewer with full section without triangular portion concrete in bed as per standard drawings where the invert level of the sewer is 1. 5 metres below ground level including dressing of beds and sides of trenches to exact profiles, grades and alignments, cement concrete 1: 3:6 in beds and sides, RC C. ring of cement concrete 1:24:, Specially hand moulded 1st class radiated brick work laid in 1:3 cement sand mortar in the inner and outer arch rings of the sewers and with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to template finished with two coats of sodium silicate wherever required. The rates include the cost of accurately planed and fitted centring moulds and supports for all works as well as for all curves, bends, falls and other special work and cleaning out the sewer throughout their lengths. Sodium silicate and steel will be supplied free of cost at the stores of the Engineer- in-charge1295mm | Metre | 10,647.00 |
| 21.70.9 | Construction of R.C.C. cum brick circular (pressure type) sewer with full section without triangular portion concrete in bed as per standard drawings where the invert level of the sewer is 1. 5 metres below ground level including dressing of beds and sides of trenches to exact profiles, grades and alignments, cement concrete 1: 3:6 in beds and sides, RC C. ring of cement concrete 1:24:, Specially hand moulded 1st class radiated brick work laid in 1:3 cement sand mortar in the inner and outer arch rings of the sewers and with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to template finished with two coats of sodium silicate wherever required. The rates include the cost of accurately planed and fitted centring moulds and supports for all works as well as for all curves, bends, falls and other special work and cleaning out the sewer throughout their lengths. Sodium silicate and steel will be supplied free of cost at the stores of the Engineer- in-charge1370 mm | Metre | 11,095.00 |
| 21.70.10 | Construction of R.C.C. cum brick circular (pressure type) sewer with full section without triangular portion concrete in bed as per standard drawings where the invert level of the sewer is 1. 5 metres below ground level including dressing of beds and sides of trenches to exact profiles, grades and alignments, cement concrete 1: 3:6 in beds and sides, RC C. ring of cement concrete 1:24:, Specially hand moulded 1st class radiated brick work laid in 1:3 cement sand mortar in the inner and outer arch rings of the sewers and with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to template finished with two coats of sodium silicate wherever required. The rates include the cost of accurately planed and fitted centring moulds and supports for all works as well as for all curves, bends, falls and other special work and cleaning out the sewer throughout their lengths. Sodium silicate and steel will be supplied free of cost at the stores of the Engineer- in-charge1450mm | Metre | 11,632.00 |
| 21.70.11 | Construction of R.C.C. cum brick circular (pressure type) sewer with full section without triangular portion concrete in bed as per standard drawings where the invert level of the sewer is 1. 5 metres below ground level including dressing of beds and sides of trenches to exact profiles, grades and alignments, cement concrete 1: 3:6 in beds and sides, RC C. ring of cement concrete 1:24:, Specially hand moulded 1st class radiated brick work laid in 1:3 cement sand mortar in the inner and outer arch rings of the sewers and with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to template finished with two coats of sodium silicate wherever required. The rates include the cost of accurately planed and fitted centring moulds and supports for all works as well as for all curves, bends, falls and other special work and cleaning out the sewer throughout their lengths. Sodium silicate and steel will be supplied free of cost at the stores of the Engineer- in-charge1525mm | Metre | 12,133.00 |
| 21.71.1 | Extra over and above the rates for item no.21. 70 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level The finished inside diametre of sewer being760mm | Metre | 56.00 |
| 21.71.2 | Extra over and above the rates for item no.21. 70 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level The finished inside diametre of sewer being840mm | Metre | 61.00 |
| 21.71.3 | Extra over and above the rates for item no.21. 70 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level The finished inside diametre of sewer being915mm | Metre | 67.00 |
| 21.71.4 | Extra over and above the rates for item no.21. 70 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level The finished inside diametre of sewer being990mm | Metre | 72.00 |
| 21.71.5 | Extra over and above the rates for item no.21. 70 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level The finished inside diametre of sewer being1065mm | Metre | 76.00 |
| 21.71.6 | Extra over and above the rates for item no.21. 70 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level The finished inside diametre of sewer being1145m m | Metre | 86.00 |
| 21.71.7 | Extra over and above the rates for item no.21. 70 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level The finished inside diametre of sewer being1220mm | Metre | 91.00 |
| 21.71.8 | Extra over and above the rates for item no.21. 70 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level The finished inside diametre of sewer being1295mm | Metre | 99.00 |
| 21.71.9 | Extra over and above the rates for item no.21. 70 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level The finished inside diametre of sewer being1370m m | Metre | 102.00 |
| 21.71.10 | Extra over and above the rates for item no.21. 70 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level The finished inside diametre of sewer being1450mm | Metre | 107.00 |
| 21.71.11 | Extra over and above the rates for item no.21. 70 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level The finished inside diametre of sewer being1525mm | Metre | 112.00 |
| 21.72.1 | Construction of R.C.C cum brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as described in item no.21.70a bove. The finished inside diametre of sewer being760mm | Metre | 6,530.00 |
| 21.72.2 | Construction of R.C.C cum brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as described in item no.21.70a bove. The finished inside diametre of sewer being840mm | Metre | 7,238.00 |
| 21.72.3 | Construction of R.C.C cum brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as described in item no.21.70a bove. The finished inside diametre of sewer being915mm | Metre | 7,847.00 |
| 21.72.4 | Construction of R.C.C cum brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as described in item no.21.70a bove. The finished inside diametre of sewer being990mm | Metre | 8,493.00 |
| 21.72.5 | Construction of R.C.C cum brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as described in item no.21.70a bove. The finished inside diametre of sewer being1065mm | Metre | 9,091.00 |
| 21.72.6 | Construction of R.C.C cum brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as described in item no.21.70a bove. The finished inside diametre of sewer being1145 mm | Metre | 10,397.00 |
| 21.72.7 | Construction of R.C.C cum brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as described in item no.21.70a bove. The finished inside diametre of sewer being1220mm | Metre | 11,145.00 |
| 21.72.8 | Construction of R.C.C cum brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as described in item no.21.70a bove. The finished inside diametre of sewer being1295mm | Metre | 12,096.00 |
| 21.72.9 | Construction of R.C.C cum brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as described in item no.21.70a bove. The finished inside diametre of sewer being1370m m | Metre | 12,673.00 |
| 21.72.10 | Construction of R.C.C cum brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as described in item no.21.70a bove. The finished inside diametre of sewer being1450mm | Metre | 13,308.00 |
| 21.72.11 | Construction of R.C.C cum brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as described in item no.21.70a bove. The finished inside diametre of sewer being1525mm | Metre | 13,937.00 |
| 21.73.1 | Extra over and above the rates for item No. 21.72 for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside diametre of sewer being760mm | Metre | 61.00 |
| 21.73.2 | Extra over and above the rates for item No. 21.72 for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside diametre of sewer being840mm | Metre | 67.00 |
| 21.73.3 | Extra over and above the rates for item No. 21.72 for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside diametre of sewer being915mm | Metre | 73.00 |
| 21.73.4 | Extra over and above the rates for item No. 21.72 for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside diametre of sewer being990mm | Metre | 79.00 |
| 21.73.5 | Extra over and above the rates for item No. 21.72 for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside diametre of sewer being1065mm | Metre | 84.00 |
| 21.73.6 | Extra over and above the rates for item No. 21.72 for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside diametre of sewer being1145 mm | Metre | 95.00 |
| 21.73.7 | Extra over and above the rates for item No. 21.72 for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside diametre of sewer being1220mm | Metre | 102.00 |
| 21.73.8 | Extra over and above the rates for item No. 21.72 for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside diametre of sewer being1295mm | Metre | 111.00 |
| 21.73.9 | Extra over and above the rates for item No. 21.72 for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside diametre of sewer being1370 mm | Metre | 115.00 |
| 21.73.10 | Extra over and above the rates for item No. 21.72 for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside diametre of sewer being1450mm | Metre | 121.00 |
| 21.73.11 | Extra over and above the rates for item No. 21.72 for every additional 4 metres depth or part thereof for depth of the invert level beyond 1.5 metres below ground level. The finished inside diametre of sewer being1525mm | Metre | 127.00 |
| 21.74.1 | Construction of R. C.C.-cum-brick circular (pressure type) sewer as per standard drawings where the invert level of the sewer is up to 1.5 metres below ground level built up to one half height only (as constructed in manholes lengths) without triangular portion concrete in bed including dressing of beds and sides of trenches to exact profiles, grade and alignments, cement concrete 1: 3:6 in beds and sides, R.C.C. ring of cement concrete 1:2:4, specially hand moulded first dass radiated brick work laid in 1: 3 cement sand mortar in the inner arch ring of the sewer with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1: 2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to templates, finished with two coats of sodium silicate wherever required, The rates include the cost of accurately planed and fitted centring moulds and supports for all works and cleaning out the sewer throughout their lengths. sodium silicate and steel will be supplied free of cost at the stores of the Engineer-in-in charge.T he finished inside diametre of sewer being760mm | Metre | 2,185.00 |
| 21.74.2 | Construction of R. C.C.-cum-brick circular (pressure type) sewer as per standard drawings where the invert level of the sewer is up to 1.5 metres below ground level built up to one half height only (as constructed in manholes lengths) without triangular portion concrete in bed including dressing of beds and sides of trenches to exact profiles, grade and alignments, cement concrete 1: 3:6 in beds and sides, R.C.C. ring of cement concrete 1:2:4, specially hand moulded first dass radiated brick work laid in 1: 3 cement sand mortar in the inner arch ring of the sewer with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1: 2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to templates, finished with two coats of sodium silicate wherever required, The rates include the cost of accurately planed and fitted centring moulds and supports for all works and cleaning out the sewer throughout their lengths. sodium silicate and steel will be supplied free of cost at the stores of the Engineer-in-in charge.T he finished inside diametre of sewer being840mm | Metre | 2,435.00 |
| 21.74.3 | Construction of R. C.C.-cum-brick circular (pressure type) sewer as per standard drawings where the invert level of the sewer is up to 1.5 metres below ground level built up to one half height only (as constructed in manholes lengths) without triangular portion concrete in bed including dressing of beds and sides of trenches to exact profiles, grade and alignments, cement concrete 1: 3:6 in beds and sides, R.C.C. ring of cement concrete 1:2:4, specially hand moulded first dass radiated brick work laid in 1: 3 cement sand mortar in the inner arch ring of the sewer with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1: 2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to templates, finished with two coats of sodium silicate wherever required, The rates include the cost of accurately planed and fitted centring moulds and supports for all works and cleaning out the sewer throughout their lengths. sodium silicate and steel will be supplied free of cost at the stores of the Engineer-in-in charge.T he finished inside diametre of sewer being915mm | Metre | 2,600.00 |
| 21.74.4 | Construction of R. C.C.-cum-brick circular (pressure type) sewer as per standard drawings where the invert level of the sewer is up to 1.5 metres below ground level built up to one half height only (as constructed in manholes lengths) without triangular portion concrete in bed including dressing of beds and sides of trenches to exact profiles, grade and alignments, cement concrete 1: 3:6 in beds and sides, R.C.C. ring of cement concrete 1:2:4, specially hand moulded first dass radiated brick work laid in 1: 3 cement sand mortar in the inner arch ring of the sewer with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1: 2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to templates, finished with two coats of sodium silicate wherever required, The rates include the cost of accurately planed and fitted centring moulds and supports for all works and cleaning out the sewer throughout their lengths. sodium silicate and steel will be supplied free of cost at the stores of the Engineer-in-in charge.T he finished inside diametre of sewer being990mm | Metre | 2,766.00 |
| 21.74.5 | Construction of R. C.C.-cum-brick circular (pressure type) sewer as per standard drawings where the invert level of the sewer is up to 1.5 metres below ground level built up to one half height only (as constructed in manholes lengths) without triangular portion concrete in bed including dressing of beds and sides of trenches to exact profiles, grade and alignments, cement concrete 1: 3:6 in beds and sides, R.C.C. ring of cement concrete 1:2:4, specially hand moulded first dass radiated brick work laid in 1: 3 cement sand mortar in the inner arch ring of the sewer with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1: 2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to templates, finished with two coats of sodium silicate wherever required, The rates include the cost of accurately planed and fitted centring moulds and supports for all works and cleaning out the sewer throughout their lengths. sodium silicate and steel will be supplied free of cost at the stores of the Engineer-in-in charge.T he finished inside diametre of sewer being1065mm | Metre | 3,003.00 |
| 21.74.6 | Construction of R. C.C.-cum-brick circular (pressure type) sewer as per standard drawings where the invert level of the sewer is up to 1.5 metres below ground level built up to one half height only (as constructed in manholes lengths) without triangular portion concrete in bed including dressing of beds and sides of trenches to exact profiles, grade and alignments, cement concrete 1: 3:6 in beds and sides, R.C.C. ring of cement concrete 1:2:4, specially hand moulded first dass radiated brick work laid in 1: 3 cement sand mortar in the inner arch ring of the sewer with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1: 2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to templates, finished with two coats of sodium silicate wherever required, The rates include the cost of accurately planed and fitted centring moulds and supports for all works and cleaning out the sewer throughout their lengths. sodium silicate and steel will be supplied free of cost at the stores of the Engineer-in-in charge.T he finished inside diametre of sewer being1145m m | Metre | 3,309.00 |
| 21.74.7 | Construction of R. C.C.-cum-brick circular (pressure type) sewer as per standard drawings where the invert level of the sewer is up to 1.5 metres below ground level built up to one half height only (as constructed in manholes lengths) without triangular portion concrete in bed including dressing of beds and sides of trenches to exact profiles, grade and alignments, cement concrete 1: 3:6 in beds and sides, R.C.C. ring of cement concrete 1:2:4, specially hand moulded first dass radiated brick work laid in 1: 3 cement sand mortar in the inner arch ring of the sewer with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1: 2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to templates, finished with two coats of sodium silicate wherever required, The rates include the cost of accurately planed and fitted centring moulds and supports for all works and cleaning out the sewer throughout their lengths. sodium silicate and steel will be supplied free of cost at the stores of the Engineer-in-in charge.T he finished inside diametre of sewer being1220mm | Metre | 3,503.00 |
| 21.74.8 | Construction of R. C.C.-cum-brick circular (pressure type) sewer as per standard drawings where the invert level of the sewer is up to 1.5 metres below ground level built up to one half height only (as constructed in manholes lengths) without triangular portion concrete in bed including dressing of beds and sides of trenches to exact profiles, grade and alignments, cement concrete 1: 3:6 in beds and sides, R.C.C. ring of cement concrete 1:2:4, specially hand moulded first dass radiated brick work laid in 1: 3 cement sand mortar in the inner arch ring of the sewer with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1: 2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to templates, finished with two coats of sodium silicate wherever required, The rates include the cost of accurately planed and fitted centring moulds and supports for all works and cleaning out the sewer throughout their lengths. sodium silicate and steel will be supplied free of cost at the stores of the Engineer-in-in charge.T he finished inside diametre of sewer being1295mm | Metre | 3,745.00 |
| 21.74.9 | Construction of R. C.C.-cum-brick circular (pressure type) sewer as per standard drawings where the invert level of the sewer is up to 1.5 metres below ground level built up to one half height only (as constructed in manholes lengths) without triangular portion concrete in bed including dressing of beds and sides of trenches to exact profiles, grade and alignments, cement concrete 1: 3:6 in beds and sides, R.C.C. ring of cement concrete 1:2:4, specially hand moulded first dass radiated brick work laid in 1: 3 cement sand mortar in the inner arch ring of the sewer with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1: 2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to templates, finished with two coats of sodium silicate wherever required, The rates include the cost of accurately planed and fitted centring moulds and supports for all works and cleaning out the sewer throughout their lengths. sodium silicate and steel will be supplied free of cost at the stores of the Engineer-in-in charge.T he finished inside diametre of sewer being1370 mm | Metre | 3,977.00 |
| 21.74.10 | Construction of R. C.C.-cum-brick circular (pressure type) sewer as per standard drawings where the invert level of the sewer is up to 1.5 metres below ground level built up to one half height only (as constructed in manholes lengths) without triangular portion concrete in bed including dressing of beds and sides of trenches to exact profiles, grade and alignments, cement concrete 1: 3:6 in beds and sides, R.C.C. ring of cement concrete 1:2:4, specially hand moulded first dass radiated brick work laid in 1: 3 cement sand mortar in the inner arch ring of the sewer with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1: 2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to templates, finished with two coats of sodium silicate wherever required, The rates include the cost of accurately planed and fitted centring moulds and supports for all works and cleaning out the sewer throughout their lengths. sodium silicate and steel will be supplied free of cost at the stores of the Engineer-in-in charge.T he finished inside diametre of sewer being1450mm | Metre | 4,176.00 |
| 21.74.11 | Construction of R. C.C.-cum-brick circular (pressure type) sewer as per standard drawings where the invert level of the sewer is up to 1.5 metres below ground level built up to one half height only (as constructed in manholes lengths) without triangular portion concrete in bed including dressing of beds and sides of trenches to exact profiles, grade and alignments, cement concrete 1: 3:6 in beds and sides, R.C.C. ring of cement concrete 1:2:4, specially hand moulded first dass radiated brick work laid in 1: 3 cement sand mortar in the inner arch ring of the sewer with the entire inner surface of the sewer rendered with neat cement not less than 12 mm in thickness of 1: 2 cement sand plaster and finished with a floating coat of neat cement left absolutely smooth polished and correct to templates, finished with two coats of sodium silicate wherever required, The rates include the cost of accurately planed and fitted centring moulds and supports for all works and cleaning out the sewer throughout their lengths. sodium silicate and steel will be supplied free of cost at the stores of the Engineer-in-in charge.T he finished inside diametre of sewer being1525mm | Metre | 4,401.00 |
| 21.75.1 | Extra over and above the rates for item no.21.74 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being760mm | Metre | 31.00 |
| 21.75.2 | Extra over and above the rates for item no.21.74 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being840mm | Metre | 34.00 |
| 21.75.3 | Extra over and above the rates for item no.21.74 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being915mm | Metre | 37.00 |
| 21.75.4 | Extra over and above the rates for item no.21.74 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being990mm | Metre | 40.00 |
| 21.75.5 | Extra over and above the rates for item no.21.74 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being1065mm | Metre | 43.00 |
| 21.75.6 | Extra over and above the rates for item no.21.74 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being1145m m | Metre | 48.00 |
| 21.75.7 | Extra over and above the rates for item no.21.74 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being1220mm | Metre | 51.00 |
| 21.75.8 | Extra over and above the rates for item no.21.74 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being1295mm | Metre | 54.00 |
| 21.75.9 | Extra over and above the rates for item no.21.74 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being1370 mm | Metre | 57.00 |
| 21.75.10 | Extra over and above the rates for item no.21.74 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being1450mm | Metre | 59.00 |
| 21.75.11 | Extra over and above the rates for item no.21.74 for every additional 4 metres depth or part there of for invert level beyond 1.5 metre below ground level. The finished inside diametre of sewer being1525mm | Metre | 61.00 |
| 21.76.1 | Construction of RCC-cum-Brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as per described in item no. 21.74a bove. The finished inside dia metre of sewer being760mm | Metre | 2,797.00 |
| 21.76.2 | Construction of RCC-cum-Brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as per described in item no. 21.74a bove. The finished inside dia metre of sewer being840mm | Metre | 3,176.00 |
| 21.76.3 | Construction of RCC-cum-Brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as per described in item no. 21.74a bove. The finished inside dia metre of sewer being915mm | Metre | 3,373.00 |
| 21.76.4 | Construction of RCC-cum-Brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as per described in item no. 21.74a bove. The finished inside dia metre of sewer being990mm | Metre | 3,636.00 |
| 21.76.5 | Construction of RCC-cum-Brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as per described in item no. 21.74a bove. The finished inside dia metre of sewer being1065mm | Metre | 3,970.00 |
| 21.76.6 | Construction of RCC-cum-Brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as per described in item no. 21.74a bove. The finished inside dia metre of sewer being1145 mm | Metre | 4,501.00 |
| 21.76.7 | Construction of RCC-cum-Brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as per described in item no. 21.74a bove. The finished inside dia metre of sewer being1220mm | Metre | 4,888.00 |
| 21.76.8 | Construction of RCC-cum-Brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as per described in item no. 21.74a bove. The finished inside dia metre of sewer being1295mm | Metre | 5,194.00 |
| 21.76.9 | Construction of RCC-cum-Brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as per described in item no. 21.74a bove. The finished inside dia metre of sewer being1370 mm | Metre | 5,555.00 |
| 21.76.10 | Construction of RCC-cum-Brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as per described in item no. 21.74a bove. The finished inside dia metre of sewer being1450mm | Metre | 5,851.00 |
| 21.76.11 | Construction of RCC-cum-Brick circular (pressure type) sewers with triangular portion concrete in bed as per standard drawings as per described in item no. 21.74a bove. The finished inside dia metre of sewer being1525mm | Metre | 6,204.00 |
| 21.77.1 | Extra over and above the rates for item no.21. 76 above for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level.T he finished inside diametre of sewer being760mm | Metre | 36.00 |
| 21.77.2 | Extra over and above the rates for item no.21. 76 above for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level.T he finished inside diametre of sewer being840mm | Metre | 40.00 |
| 21.77.3 | Extra over and above the rates for item no.21. 76 above for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level.T he finished inside diametre of sewer being915mm | Metre | 43.00 |
| 21.77.4 | Extra over and above the rates for item no.21. 76 above for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level.T he finished inside diametre of sewer being990mm | Metre | 47.00 |
| 21.77.5 | Extra over and above the rates for item no.21. 76 above for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level.T he finished inside diametre of sewer being1065mm | Metre | 51.00 |
| 21.77.6 | Extra over and above the rates for item no.21. 76 above for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level.T he finished inside diametre of sewer being1145m m | Metre | 58.00 |
| 21.77.7 | Extra over and above the rates for item no.21. 76 above for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level.T he finished inside diametre of sewer being1220mm | Metre | 62.00 |
| 21.77.8 | Extra over and above the rates for item no.21. 76 above for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level.T he finished inside diametre of sewer being1295mm | Metre | 66.00 |
| 21.77.9 | Extra over and above the rates for item no.21. 76 above for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level.T he finished inside diametre of sewer being1370m m | Metre | 69.00 |
| 21.77.10 | Extra over and above the rates for item no.21. 76 above for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level.T he finished inside diametre of sewer being1450mm | Metre | 73.00 |
| 21.77.11 | Extra over and above the rates for item no.21. 76 above for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level.T he finished inside diametre of sewer being1525mm per L. CIRCULAR STORM WATER BRICK DRAINS | Metre | 76.00 |
| 21.79.1 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being685mm | Metre | 3,472.00 |
| 21.79.2 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being760mm | Metre | 3,757.00 |
| 21.79.3 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being840mm | Metre | 4,100.00 |
| 21.79.4 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being915mm | Metre | 4,416.00 |
| 21.79.5 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being990mm | Metre | 4,707.00 |
| 21.79.6 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being1065mm | Metre | 4,998.00 |
| 21.79.7 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being1145m m | Metre | 5,347.00 |
| 21.79.8 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being1220mm | Metre | 5,641.00 |
| 21.79.9 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being1295mm | Metre | 5,936.00 |
| 21.79.10 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being1370m m | Metre | 6,233.00 |
| 21.79.11 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being1450mm | Metre | 6,578.00 |
| 21.79.12 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being1525mm | Metre | 6,905.00 |
| 21.79.13 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being1600mm | Metre | 7,204.00 |
| 21.79.14 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being1680mm | Metre | 7,509.00 |
| 21.79.15 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being1755mm | Metre | 7,867.00 |
| 21.79.16 | Construction of brick circular storm water drains as per standard drawings as described in item no. 21.78 above but with cement lime sand concrete 1:2:9:24 with stone ballast of 20m m (as specified in item no. 10.18) gauge in beds and sides. The finished inside diametre of storm water drain being1830mm | Metre | 8,170.00 |
| 21.80.1 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being685mm | Metre | 49.00 |
| 21.80.2 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being760mm | Metre | 53.00 |
| 21.80.3 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being840mm | Metre | 58.00 |
| 21.80.4 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being915mm | Metre | 62.00 |
| 21.80.5 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being990mm | Metre | 66.00 |
| 21.80.6 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being1065mm | Metre | 70.00 |
| 21.80.7 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being1045mm | Metre | 74.00 |
| 21.80.8 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being1020mm | Metre | 78.00 |
| 21.80.9 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being1295mm | Metre | 82.00 |
| 21.80.10 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being1370m m | Metre | 86.00 |
| 21.80.11 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being1450mm | Metre | 91.00 |
| 21.80.12 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being1525mm | Metre | 95.00 |
| 21.80.13 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being1600mm | Metre | 99.00 |
| 21.80.14 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being1680mm | Metre | 103.00 |
| 21.80.15 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being1755mm | Metre | 108.00 |
| 21.80.16 | Extra over and above the rates for item No. 21.78 and 21.79 for every additional 4 metres depth or part thereof for depth of invert level beyond 1.5 metres below ground level. The finished inside diameter of storm water drain being1830mm | Metre | 112.00 |
| 21.82.1 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being685mm | Metre | 1,711.00 |
| 21.82.2 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being760mm | Metre | 1,826.00 |
| 21.82.3 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being840mm | Metre | 2,032.00 |
| 21.82.4 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being915mm | Metre | 2,171.00 |
| 21.82.5 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being990mm | Metre | 2,288.00 |
| 21.82.6 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being1065mm | Metre | 2,452.00 |
| 21.82.7 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being1145 mm | Metre | 2,614.00 |
| 21.82.8 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being1220mm | Metre | 2,736.00 |
| 21.82.9 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being1295mm | Metre | 2,902.00 |
| 21.82.10 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being1370m m | Metre | 3,022.00 |
| 21.82.11 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being1450mm | Metre | 3,146.00 |
| 21.82.12 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being1525mm | Metre | 3,336.00 |
| 21.82.13 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being1600mm | Metre | 3,460.00 |
| 21.82.14 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being1680mm | Metre | 3,632.00 |
| 21.82.15 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being1755mm | Metre | 3,801.00 |
| 21.82.16 | Construction of brick circular storm water drains as per standard drawings built up to one half height only (as constructed in manhole length )as per described in item No. 21.81 above, but with cement lime sand concrete 1: 2:9:24 with stone ballast of 20 mm gauge in beds and sides The finished inside diameter of storm water drain being1830mm | Metre | 3,928.00 |
| 21.83.1 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being685mm | Metre | 20.00 |
| 21.83.2 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being760mm | Metre | 22.00 |
| 21.83.3 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being840mm | Metre | 24.00 |
| 21.83.4 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being915mm | Metre | 26.00 |
| 21.83.5 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being990mm | Metre | 27.00 |
| 21.83.6 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being1065mm | Metre | 30.00 |
| 21.83.7 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being1045mm | Metre | 32.00 |
| 21.83.8 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being1020mm | Metre | 33.00 |
| 21.83.9 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being1295mm | Metre | 35.00 |
| 21.83.10 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being1370 mm | Metre | 37.00 |
| 21.83.11 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being1450 mm | Metre | 38.00 |
| 21.83.12 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being1525 mm | Metre | 41.00 |
| 21.83.13 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being1600 mm | Metre | 42.00 |
| 21.83.15 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being1755 mm | Metre | 46.00 |
| 21.83.16 | Extra over and above the rates for item No. 21.81 and 21.82 for every additional 4 metres depth or part there of for depth of invert level beyond 1.5 metres below ground level. The finished inside dia meter of storm water drain being1830 mm per Notes: (i) For all types of sewers/drains described under item no.21.58,21.59,21.61,21.62,21.64,21.65,21.67,21.68,21.7 0, 21.7 2, 21.7 4, 21.76,21.78, 21.79, 21.81 and 21.82, the through rates laid down in these items shall be payable in all cases and not the individual rates for lime concrete, brick work and other separate components item of work as laid down in this Schedule. (ii) In the case of manholes, junctions and junction chambers, flushing tanks and various works however payment will be made on the basis of detailed measurements of each separate item of work carried out under the heads lime concrete, plain concrete and concrete for reinforcement, brick work pointing and plastering etc. as laid down and described in this Schedule. (iii) In the event of any extra or additional work being carried out under orders in writing of the Engineer-in-charge of the works in connection with any type of sewer the same shall be measured and paid for at the respective rates laid down in this Scheduled under the heads lime concrete plain concrete and concrete for re-inforcement, brick work pointing and plastering for the items of extra works actually carried out. (iv)ln the event of Engineer-in-charge requiring the provision of the whole or any part of the foundation or envelope of any type of sewers to be constructed of cement concrete in place of lime concrete/ cement lime sand concrete a deduction shall be made according to the rates specified for lime concrete /cement lime sand concrete in beds and sides and in haunches and top arch rings etc. on account of the actual volume of lime concrete or cement lime sand concrete from the amount payable to the contractors and the contactor shall be entitled to payment for the cement concrete work actually carried out by him under the orders of the Engineer-in-charge at the relevant rates laid down in this Schedule of Rates depending on the Specifications and description of the said concrete work, No extra over and above the said rate laid down in this Schedule of Rates shall be allowed to the contractor due to difficulties of the works small dimensions, laying concrete in or under water, or on account of any troubles or difficulties whatsoever which may be encountered by him in the work and the contractor before tendering for the work shall make himself thoroughly acquainted with all local conditions and difficulties in respect thereof in his tender. (v) Socketed joints made on branch pipes, junctions or blocks laid in connection with the brick bum sewers will be paid for at the rate laid down for jointing salt glazed stone ware pipes vide item No.21.39. M.MASONRYCHAMBERS | Metre | 47.00 |
| 21.84.1 | Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1: 5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1: 2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard designSize 450 mm X450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C. topping | Each | 3,905.00 |
| 21.84.2 | Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1: 5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1: 2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard designSize 450 mm X 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with C.C. topping) | Each | 5,573.00 |
| 21.84.3 | Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1: 5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1: 2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard designSize 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with R.C.C. slab) Note: Normally inspection chambers of 450 mm x 450mm and 450mm x 600 mm should be constructed. In very exceptional cases where connections cannot be accommodated in 450 mm X 600 mm size inspection chamber of 600 mm x9 00 mm be adopted | Each | 6,090.00 |
| 21.86 | Constructing brick masonry ventilating chambers as per standard drawings including dressing of beds and sides of chamber to exact profiles 15 cm lime concrete 16:24100 (as per specified in item No. 10.6) in foundation, first class brick work laid in cement sand mortar 1:5, cement concrete 1: 2:4 for reinforced concrete work in slab 12mm thick cement for plaster 1:2 rendered with a floating coat of neat cement 1 mm thick over exposed brick tablet and inside walls, lime pointing 2:3 on outside complete and as required by the Engineer-in-charge | Each | 9,296.00 |
| 21.87.1.1 | Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick lime concrete 16:24:100 (as per specified in item No.10.6) in foundations 1st class brick work laid in cement sand mortar 1:5, 40 mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12mm in thickness of 1:2 cement sand plaster and finished with floating coat of neat cement 1 mm thick left absolutely smooth polished and correct to templates including labour for fixing the C.I. road gully grating and frame including painting with coal tar (as Specified in item No. Item 21.48) complete to the requirement of the Engineer in-charge — Single road gully chamberSize: 610mm x 457mm x 800mm | Each | 3,625.00 |
| 21.87.1.2 | Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick lime concrete 16:24:100 (as per specified in item No.10.6) in foundations 1st class brick work laid in cement sand mortar 1:5, 40 mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12mm in thickness of 1:2 cement sand plaster and finished with floating coat of neat cement 1 mm thick left absolutely smooth polished and correct to templates including labour for fixing the C.I. road gully grating and frame including painting with coal tar (as Specified in item No. Item 21.48) complete to the requirement of the Engineer in-charge — Single road gully chamberSize.-610 mmx457 mmx1105mm | Each | 4,575.00 |
| 21.87.2.1 | Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick lime concrete 16:24:100 (as per specified in item No.10.6) in foundations 1st class brick work laid in cement sand mortar 1:5, 40 mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12mm in thickness of 1:2 cement sand plaster and finished with floating coat of neat cement 1 mm thick left absolutely smooth polished and correct to templates including labour for fixing the C.I. road gully grating and frame including painting with coal tar (as Specified in item No. Item 21.48) complete to the requirement of the Engineer in-charge — Double Road Gully ChamberSize 1448mm x 457mm x 800mm | Each | 5,978.00 |
| 21.87.2.2 | Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick lime concrete 16:24:100 (as per specified in item No.10.6) in foundations 1st class brick work laid in cement sand mortar 1:5, 40 mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12mm in thickness of 1:2 cement sand plaster and finished with floating coat of neat cement 1 mm thick left absolutely smooth polished and correct to templates including labour for fixing the C.I. road gully grating and frame including painting with coal tar (as Specified in item No. Item 21.48) complete to the requirement of the Engineer in-charge — Double Road Gully ChamberSize: 1448mm x 457mm x 1105 mm | Each | 1,552.00 |
| 21.88.1 | Reduction for every 7.5 cm depth of road gully chamber from the rate of item No. 29.87 aboveSingle Road Gully Chamber | Each | 239.00 |
| 21.88.2 | Reduction for every 7.5 cm depth of road gully chamber from the rate of item No. 29.87 aboveDouble road gully chamber N. MANHOLE CHAMBERS | Each | 392.00 |
| 21.93.1 | Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-chargeType:- Extra Heavy Duty Set (EHD-35) 560MM Clear Opening | Each | 1,293.00 |
| 21.93.2 | Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-chargeType:- Extra Heavy Duty Set (EHD-20) 560MM Clear Opening | Each | 1,185.00 |
| 21.93.3 | Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-chargeType:- Extra Heavy Duty Set (EHD-10) 560MM Clear Opening | Each | 864.00 |
| 21.94.1 | Providing salt glazed stone ware pipes grade 'A' in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 induding the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge100mm i/d | Metre | 135.00 |
| 21.94.2 | Providing salt glazed stone ware pipes grade 'A' in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 induding the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge150mm i/d | Metre | 210.00 |
| 21.94.3 | Providing salt glazed stone ware pipes grade 'A' in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 induding the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge200mm i/d | Metre | 267.00 |
| 21.94.4 | Providing salt glazed stone ware pipes grade 'A' in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 induding the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge250mm i/d | Metre | 408.00 |
| 21.94.5 | Providing salt glazed stone ware pipes grade 'A' in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 induding the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge300mm i/d | Metre | 592.00 |
| 21.94.6 | Providing salt glazed stone ware pipes grade 'A' in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 induding the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge350mm i/d | Metre | 1,032.00 |
| 21.94.7 | Providing salt glazed stone ware pipes grade 'A' in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 induding the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge400mm i/d | Metre | 1,509.00 |
| 21.94.8 | Providing salt glazed stone ware pipes grade 'A' in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 induding the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge450mm i/d | Metre | 2,002.00 |
| 21.94.9 | Providing salt glazed stone ware pipes grade 'A' in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 induding the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge500mm i/d | Metre | 3,200.00 |
| 21.94.10 | Providing salt glazed stone ware pipes grade 'A' in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 induding the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge600mm i/d | Metre | 4,457.00 |
| 21.95.1 | Providing lowering cutting jointing and testing RCC pipe class NP 3 as per 18-458-2003 with spigot & socketed joints manufactured with ISi marked sulphate resistance cement as per ISi 12330 with rubber rings ISi marked antiternmite as required at site in to trenches for all depths and laying out the same to correct alignment gradients and levels including dressing and trimming and cutting of concrete beds and side of trenches, if required jointing with rubber rings in trenches and jointing with 1: 3/2 cement sand mortar and with end dowels filled with 1: 3/2. cement sand mortar and finishing the joints at an angle of 45d egree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in item No. 21.38, item 21.44, item 21.45, & item 21.46 including cartage loading and unloading complete in all respects. the internal diametric of the sewer being350mm | Metre | 1,110.00 |
| 21.95.2 | Providing lowering cutting jointing and testing RCC pipe class NP 3 as per 18-458-2003 with spigot & socketed joints manufactured with ISi marked sulphate resistance cement as per ISi 12330 with rubber rings ISi marked antiternmite as required at site in to trenches for all depths and laying out the same to correct alignment gradients and levels including dressing and trimming and cutting of concrete beds and side of trenches, if required jointing with rubber rings in trenches and jointing with 1: 3/2 cement sand mortar and with end dowels filled with 1: 3/2. cement sand mortar and finishing the joints at an angle of 45d egree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in item No. 21.38, item 21.44, item 21.45, & item 21.46 including cartage loading and unloading complete in all respects. the internal diametric of the sewer being400mm | Metre | 1,416.00 |
| 21.95.3 | Providing lowering cutting jointing and testing RCC pipe class NP 3 as per 18-458-2003 with spigot & socketed joints manufactured with ISi marked sulphate resistance cement as per ISi 12330 with rubber rings ISi marked antiternmite as required at site in to trenches for all depths and laying out the same to correct alignment gradients and levels including dressing and trimming and cutting of concrete beds and side of trenches, if required jointing with rubber rings in trenches and jointing with 1: 3/2 cement sand mortar and with end dowels filled with 1: 3/2. cement sand mortar and finishing the joints at an angle of 45d egree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in item No. 21.38, item 21.44, item 21.45, & item 21.46 including cartage loading and unloading complete in all respects. the internal diametric of the sewer being450mm | Metre | 1,757.00 |
| 21.95.4 | Providing lowering cutting jointing and testing RCC pipe class NP 3 as per 18-458-2003 with spigot & socketed joints manufactured with ISi marked sulphate resistance cement as per ISi 12330 with rubber rings ISi marked antiternmite as required at site in to trenches for all depths and laying out the same to correct alignment gradients and levels including dressing and trimming and cutting of concrete beds and side of trenches, if required jointing with rubber rings in trenches and jointing with 1: 3/2 cement sand mortar and with end dowels filled with 1: 3/2. cement sand mortar and finishing the joints at an angle of 45d egree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in item No. 21.38, item 21.44, item 21.45, & item 21.46 including cartage loading and unloading complete in all respects. the internal diametric of the sewer being500mm | Metre | 1,922.00 |
| 21.95.5 | Providing lowering cutting jointing and testing RCC pipe class NP 3 as per 18-458-2003 with spigot & socketed joints manufactured with ISi marked sulphate resistance cement as per ISi 12330 with rubber rings ISi marked antiternmite as required at site in to trenches for all depths and laying out the same to correct alignment gradients and levels including dressing and trimming and cutting of concrete beds and side of trenches, if required jointing with rubber rings in trenches and jointing with 1: 3/2 cement sand mortar and with end dowels filled with 1: 3/2. cement sand mortar and finishing the joints at an angle of 45d egree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in item No. 21.38, item 21.44, item 21.45, & item 21.46 including cartage loading and unloading complete in all respects. the internal diametric of the sewer being600mm | Metre | 2,529.00 |
| 21.95.6 | Providing lowering cutting jointing and testing RCC pipe class NP 3 as per 18-458-2003 with spigot & socketed joints manufactured with ISi marked sulphate resistance cement as per ISi 12330 with rubber rings ISi marked antiternmite as required at site in to trenches for all depths and laying out the same to correct alignment gradients and levels including dressing and trimming and cutting of concrete beds and side of trenches, if required jointing with rubber rings in trenches and jointing with 1: 3/2 cement sand mortar and with end dowels filled with 1: 3/2. cement sand mortar and finishing the joints at an angle of 45d egree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in item No. 21.38, item 21.44, item 21.45, & item 21.46 including cartage loading and unloading complete in all respects. the internal diametric of the sewer being700mm | Metre | 3,204.00 |
| 21.95.7 | Providing lowering cutting jointing and testing RCC pipe class NP 3 as per 18-458-2003 with spigot & socketed joints manufactured with ISi marked sulphate resistance cement as per ISi 12330 with rubber rings ISi marked antiternmite as required at site in to trenches for all depths and laying out the same to correct alignment gradients and levels including dressing and trimming and cutting of concrete beds and side of trenches, if required jointing with rubber rings in trenches and jointing with 1: 3/2 cement sand mortar and with end dowels filled with 1: 3/2. cement sand mortar and finishing the joints at an angle of 45d egree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in item No. 21.38, item 21.44, item 21.45, & item 21.46 including cartage loading and unloading complete in all respects. the internal diametric of the sewer being800mm | Metre | 3,833.00 |
| 21.95.8 | Providing lowering cutting jointing and testing RCC pipe class NP 3 as per 18-458-2003 with spigot & socketed joints manufactured with ISi marked sulphate resistance cement as per ISi 12330 with rubber rings ISi marked antiternmite as required at site in to trenches for all depths and laying out the same to correct alignment gradients and levels including dressing and trimming and cutting of concrete beds and side of trenches, if required jointing with rubber rings in trenches and jointing with 1: 3/2 cement sand mortar and with end dowels filled with 1: 3/2. cement sand mortar and finishing the joints at an angle of 45d egree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in item No. 21.38, item 21.44, item 21.45, & item 21.46 including cartage loading and unloading complete in all respects. the internal diametric of the sewer being900mm | Metre | 4,065.00 |
| 21.95.9 | Providing lowering cutting jointing and testing RCC pipe class NP 3 as per 18-458-2003 with spigot & socketed joints manufactured with ISi marked sulphate resistance cement as per ISi 12330 with rubber rings ISi marked antiternmite as required at site in to trenches for all depths and laying out the same to correct alignment gradients and levels including dressing and trimming and cutting of concrete beds and side of trenches, if required jointing with rubber rings in trenches and jointing with 1: 3/2 cement sand mortar and with end dowels filled with 1: 3/2. cement sand mortar and finishing the joints at an angle of 45d egree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in item No. 21.38, item 21.44, item 21.45, & item 21.46 including cartage loading and unloading complete in all respects. the internal diametric of the sewer being1000mm | Metre | 5,030.00 |
| 21.95.10 | Providing lowering cutting jointing and testing RCC pipe class NP 3 as per 18-458-2003 with spigot & socketed joints manufactured with ISi marked sulphate resistance cement as per ISi 12330 with rubber rings ISi marked antiternmite as required at site in to trenches for all depths and laying out the same to correct alignment gradients and levels including dressing and trimming and cutting of concrete beds and side of trenches, if required jointing with rubber rings in trenches and jointing with 1: 3/2 cement sand mortar and with end dowels filled with 1: 3/2. cement sand mortar and finishing the joints at an angle of 45d egree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in item No. 21.38, item 21.44, item 21.45, & item 21.46 including cartage loading and unloading complete in all respects. the internal diametric of the sewer being1200mm | Metre | 6,109.00 |
| 21.95.11 | Providing lowering cutting jointing and testing RCC pipe class NP 3 as per 18-458-2003 with spigot & socketed joints manufactured with ISi marked sulphate resistance cement as per ISi 12330 with rubber rings ISi marked antiternmite as required at site in to trenches for all depths and laying out the same to correct alignment gradients and levels including dressing and trimming and cutting of concrete beds and side of trenches, if required jointing with rubber rings in trenches and jointing with 1: 3/2 cement sand mortar and with end dowels filled with 1: 3/2. cement sand mortar and finishing the joints at an angle of 45d egree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in item No. 21.38, item 21.44, item 21.45, & item 21.46 including cartage loading and unloading complete in all respects. the internal diametric of the sewer being1400mm | Metre | 6,594.00 |
| 21.95.12 | Providing lowering cutting jointing and testing RCC pipe class NP 3 as per 18-458-2003 with spigot & socketed joints manufactured with ISi marked sulphate resistance cement as per ISi 12330 with rubber rings ISi marked antiternmite as required at site in to trenches for all depths and laying out the same to correct alignment gradients and levels including dressing and trimming and cutting of concrete beds and side of trenches, if required jointing with rubber rings in trenches and jointing with 1: 3/2 cement sand mortar and with end dowels filled with 1: 3/2. cement sand mortar and finishing the joints at an angle of 45d egree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in item No. 21.38, item 21.44, item 21.45, & item 21.46 including cartage loading and unloading complete in all respects. the internal diametric of the sewer being1600mm | Metre | 9,752.00 |
| 21.95.13 | Providing lowering cutting jointing and testing RCC pipe class NP 3 as per 18-458-2003 with spigot & socketed joints manufactured with ISi marked sulphate resistance cement as per ISi 12330 with rubber rings ISi marked antiternmite as required at site in to trenches for all depths and laying out the same to correct alignment gradients and levels including dressing and trimming and cutting of concrete beds and side of trenches, if required jointing with rubber rings in trenches and jointing with 1: 3/2 cement sand mortar and with end dowels filled with 1: 3/2. cement sand mortar and finishing the joints at an angle of 45d egree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in item No. 21.38, item 21.44, item 21.45, & item 21.46 including cartage loading and unloading complete in all respects. the internal diametric of the sewer being1800mm | Metre | 12,113.00 |
| 21.96.1 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment200m m Outside Dia | Metre | 1,694.00 |
| 21.96.2 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment225 mm Outside Dia | Metre | 2,123.00 |
| 21.96.3 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment250 mm Outside Dia | Metre | 2,600.00 |
| 21.96.4 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment280 mm Outside Dia | Metre | 3,238.00 |
| 21.96.5 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment315 mm Outside Dia | Metre | 4,051.00 |
| 21.96.6 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment355 mm Outside Dia | Metre | 5,148.00 |
| 21.96.7 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment400 mm Outside Dia | Metre | 6,644.00 |
| 21.96.8 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment450 mm Outside Dia | Metre | 8,538.00 |
| 21.96.9 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment500 mm Outside Dia | Metre | 10,557.00 |
| 21.96.10 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment560 mm Outside Dia | Metre | 13,193.00 |
| 21.96.11 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment630 mm Outside Dia | Metre | 16,617.00 |
| 21.96.12 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment710 mm Outside Dia | Metre | 21,471.00 |
| 21.96.13 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignmentBOO mm Outside Dia | Metre | 27,175.00 |
| 21.96.14 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment900 mm Outside Dia | Metre | 34,372.00 |
| 21.96.15 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment1000m m Outside Dia | Metre | 42,416.00 |
| 21.97.1 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment200 mm Outside Dia | Metre | 1,988.00 |
| 21.97.2 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment225 mm Outside Dia | Metre | 2,490.00 |
| 21.97.3 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment250 mm Outside Dia | Metre | 3,054.00 |
| 21.97.4 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment280 mm Outside Dia | Metre | 3,802.00 |
| 21.97.5 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment315 mm Outside Dia | Metre | 4,795.00 |
| 21.97.6 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment355 mm Outside Dia | Metre | 6,057.00 |
| 21.97.7 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment400 mm Outside Dia | Metre | 7,853.00 |
| 21.97.8 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment450 mm Outside Dia | Metre | 10,058.00 |
| 21.97.9 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment500 mm Outside Dia | Metre | 12,460.00 |
| 21.97.10 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment560 mm Outside Dia | Metre | 15,547.00 |
| 21.97.11 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment630 mm Outside Dia | Metre | 19,660.00 |
| 21.97.12 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment710 mm Outside Dia | Metre | 25,316.00 |
| 21.97.13 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment800 mm Outside Dia | Metre | 32,084.00 |
| 21.97.14 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment900 mm Outside Dia | Metre | 36,107.00 |
| 21.97.15 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipe of PE-100 grade and PN-6 for sewer. application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HOPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment1000 mm Outside Dia | Metre | 44,584.00 |
| 21.98.1 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HOPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment200 mm Outside Dia | Metre | 2,518.00 |
| 21.98.2 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HOPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment225 mm Outside Dia | Metre | 3,161.00 |
| 21.98.3 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HOPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment250 mm Outside Dia | Metre | 3,892.00 |
| 21.98.4 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HOPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment280 mm Outside Dia | Metre | 4,853.00 |
| 21.98.5 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HOPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment315 mm Outside Dia | Metre | 6,126.00 |
| 21.98.6 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HOPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment355 mm Outside Dia | Metre | 7,739.00 |
| 21.98.7 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HOPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment400 mm Outside Dia | Metre | 10,028.00 |
| 21.98.8 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HOPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment450 mm Outside Dia | Metre | 12,879.00 |
| 21.98.9 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HOPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment500 mm Outside Dia | Metre | 15,907.00 |
| 21.98.10 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HOPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment560 mm Outside Dia | Metre | 19,903.00 |
| 21.98.11 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HOPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment630 mm Outside Dia | Metre | 25,165.00 |
| 21.98.12 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HOPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HOPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment710 mm Outside Dia | Metre | 32,394.00 |
| 21.99.1 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipes of PE-100 grade and PN-10 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HDPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment200 mm Outside Dia | Metre | 3,008.00 |
| 21.99.2 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipes of PE-100 grade and PN-10 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HDPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment225 mm Outside Dia | Metre | 3,788.00 |
| 21.99.3 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipes of PE-100 grade and PN-10 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HDPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment250 mm Outside Dia | Metre | 4,659.00 |
| 21.99.4 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipes of PE-100 grade and PN-10 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HDPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment280 mm Outside Dia | Metre | 5,790.00 |
| 21.99.5 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipes of PE-100 grade and PN-10 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HDPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment315 mm Outside Dia | Metre | 7,346.00 |
| 21.99.6 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipes of PE-100 grade and PN-10 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HDPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment355 mm Outside Dia | Metre | 9,300.00 |
| 21.99.7 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipes of PE-100 grade and PN-10 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HDPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment400 mm Outside Dia | Metre | 12,026.00 |
| 21.99.8 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipes of PE-100 grade and PN-10 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HDPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment450 mm Outside Dia | Metre | 15,464.00 |
| 21.99.9 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipes of PE-100 grade and PN-10 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HDPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment500 mm Outside Dia | Metre | 19,099.00 |
| 21.99.10 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipes of PE-100 grade and PN-10 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HDPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment560 mm Outside Dia | Metre | 23,934.00 |
| 21.99.11 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipes of PE-100 grade and PN-10 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HDPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment630 mm Outside Dia | Metre | 30,211.00 |
| 21.100.1 | Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect40 mm dia pipe | Each | 260.00 |
| 21.100.2 | Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect100 mm dia pipe | Each | 714.00 |
| 21.100.3 | Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect125 mm dia pipe | Each | 909.00 |
| 21.100.4 | Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect150 mm dia pipe | Each | 1,039.00 |
| 21.100.5 | Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect175 mm dia pipe | Each | 1,234.00 |
| 21.101 | Providing and fixing MS Angle 35 x 35 x 5 mm with 10 mm MS Threaded rods & Fastener & Fixture to Support the Cl and PVC Pipe | Each | 167.00 |
| 21.102.1.1 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class I (Ultimate load capacity60KN/sqm)100mm i/d | Metre | 282.00 |
| 21.102.1.2 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class I (Ultimate load capacity60KN/sqm)150mm i/d | Metre | 469.00 |
| 21.102.1.3 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class I (Ultimate load capacity60KN/sqm)200mm i/d | Metre | 745.00 |
| 21.102.1.4 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class I (Ultimate load capacity60KN/sqm)250mm i/d | Metre | 966.00 |
| 21.102.1.5 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class I (Ultimate load capacity60KN/sqm)300mm i/d | Metre | 1,234.00 |
| 21.102.1.6 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class I (Ultimate load capacity60KN/sqm)350mm i/d | Metre | 1,560.00 |
| 21.102.1.7 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class I (Ultimate load capacity60KN/sqm)400mm i/d | Metre | 1,933.00 |
| 21.102.1.8 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class I (Ultimate load capacity60KN/sqm)450mm i/d | Metre | 2,275.00 |
| 21.102.1.9 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class I (Ultimate load capacity60KN/sqm)500mm i/d | Metre | 2,871.00 |
| 21.102.1.10 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class I (Ultimate load capacity60KN/sqm)600mm i/d | Metre | 3,989.00 |
| 21.102.1.11 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class I (Ultimate load capacity60KN/sqm)700mm i/d | Metre | 5,836.00 |
| 21.102.1.12 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class I (Ultimate load capacity60KN/sqm)800mm i/d | Metre | 8,129.00 |
| 21.102.1.13 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class I (Ultimate load capacity60KN/sqm)900mm i/d | Metre | 10,759.00 |
| 21.102.1.14 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class I (Ultimate load capacity60KN/sqm)1000mm i/d | Metre | 13,085.00 |
| 21.102.2.1 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class II (Ultimate load capacity 90KN/sqm)100mm i/d | Metre | 291.00 |
| 21.102.2.2 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class II (Ultimate load capacity 90KN/sqm)150mm i/d | Metre | 520.00 |
| 21.102.2.3 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class II (Ultimate load capacity 90KN/sqm)200mm i/d | Metre | 865.00 |
| 21.102.2.4 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class II (Ultimate load capacity 90KN/sqm)250mm i/d | Metre | 1,100.00 |
| 21.102.2.5 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class II (Ultimate load capacity 90KN/sqm)300mm i/d | Metre | 1,546.00 |
| 21.102.2.6 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class II (Ultimate load capacity 90KN/sqm)350mm i/d | Metre | 1,905.00 |
| 21.102.2.7 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class II (Ultimate load capacity 90KN/sqm)400mm i/d | Metre | 2,461.00 |
| 21.102.2.8 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class II (Ultimate load capacity 90KN/sqm)450mm i/d | Metre | 2,876.00 |
| 21.102.2.9 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class II (Ultimate load capacity 90KN/sqm)500mm i/d | Metre | 3,594.00 |
| 21.102.2.10 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class II (Ultimate load capacity 90KN/sqm)600mm i/d | Metre | 5,117.00 |
| 21.102.2.11 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class II (Ultimate load capacity 90KN/sqm)700mm i/d | Metre | 6,378.00 |
| 21.102.2.12 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class II (Ultimate load capacity 90KN/sqm)800mm i/d | Metre | 8,640.00 |
| 21.102.2.13 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class II (Ultimate load capacity 90KN/sqm)900mm i/d | Metre | 10,963.00 |
| 21.102.2.14 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class II (Ultimate load capacity 90KN/sqm)1000mm i/d | Metre | 13,690.00 |
| 21.102.3.1 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class Ill (Ultimate load capacity 120KN/sqm)100mm i/d | Metre | 404.00 |
| 21.102.3.2 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class Ill (Ultimate load capacity 120KN/sqm)150mm i/d | Metre | 715.00 |
| 21.102.3.3 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class Ill (Ultimate load capacity 120KN/sqm)200mm i/d | Metre | 1,218.00 |
| 21.102.3.4 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class Ill (Ultimate load capacity 120KN/sqm)250mm i/d | Metre | 1,562.00 |
| 21.102.3.5 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class Ill (Ultimate load capacity 120KN/sqm)300mm i/d | Metre | 2,173.00 |
| 21.102.3.6 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class Ill (Ultimate load capacity 120KN/sqm)350mm i/d | Metre | 2,752.00 |
| 21.102.3.7 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class Ill (Ultimate load capacity 120KN/sqm)400mm i/d | Metre | 3,594.00 |
| 21.102.3.8 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class Ill (Ultimate load capacity 120KN/sqm)450mm i/d | Metre | 4,255.00 |
| 21.102.3.9 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class Ill (Ultimate load capacity 120KN/sqm)500mm i/d | Metre | 5,234.00 |
| 21.102.3.10 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class Ill (Ultimate load capacity 120KN/sqm)600mm i/d | Metre | 7,380.00 |
| 21.102.3.11 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class Ill (Ultimate load capacity 120KN/sqm)700mm i/d | Metre | 9,743.00 |
| 21.102.3.12 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class Ill (Ultimate load capacity 120KN/sqm)800mm i/d | Metre | 13,047.00 |
| 21.102.3.13 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class Ill (Ultimate load capacity 120KN/sqm)900mm i/d | Metre | 17,059.00 |
| 21.102.3.14 | Providing, lowering, laying, aligning, cutting (cut surface to be finished uniformly), jointing with coupling and EPDM rubber rings marked with IS: 5382 and testing, AC pressure sewerage and drainage pipes manufactured with Mazza process as per IS 6908:1991 and specials into trenches for all levels/depths including carriage, loading/ unloading, stacking, handling, rehandling etc. complete in all respects to the satisfaction of the Engineer in charge (Rates are inclusive of couplers, EPDM rubber rings and specials but exclusive of excavation and refilling) — Class Ill (Ultimate load capacity 120KN/sqm)1000mm i/d | Metre | 20,650.00 |
| 21.103.1 | Job work for cleaning of sewer lines by bucket type sewer machine including cost of diesel/lubricants complete in all respects. Only sewer machines will be provided by the department for the following sizes of sewer200 mm i/d | Metre | 188.00 |
| 21.103.2 | Job work for cleaning of sewer lines by bucket type sewer machine including cost of diesel/lubricants complete in all respects. Only sewer machines will be provided by the department for the following sizes of sewer250 mm i/d | Metre | 208.00 |
| 21.103.3 | Job work for cleaning of sewer lines by bucket type sewer machine including cost of diesel/lubricants complete in all respects. Only sewer machines will be provided by the department for the following sizes of sewer300 mm i/d | Metre | 261.00 |
| 21.103.4 | Job work for cleaning of sewer lines by bucket type sewer machine including cost of diesel/lubricants complete in all respects. Only sewer machines will be provided by the department for the following sizes of sewer350 mm i/d | Metre | 292.00 |
| 21.103.5 | Job work for cleaning of sewer lines by bucket type sewer machine including cost of diesel/lubricants complete in all respects. Only sewer machines will be provided by the department for the following sizes of sewer400 mm i/d | Metre | 338.00 |
| 21.103.6 | Job work for cleaning of sewer lines by bucket type sewer machine including cost of diesel/lubricants complete in all respects. Only sewer machines will be provided by the department for the following sizes of sewer450 mm i/d | Metre | 441.00 |
| 21.103.7 | Job work for cleaning of sewer lines by bucket type sewer machine including cost of diesel/lubricants complete in all respects. Only sewer machines will be provided by the department for the following sizes of sewer500 mm i/d | Metre | 461.00 |
| 21.103.8 | Job work for cleaning of sewer lines by bucket type sewer machine including cost of diesel/lubricants complete in all respects. Only sewer machines will be provided by the department for the following sizes of sewer600 mm i/d | Metre | 545.00 |
| 21.103.9 | Job work for cleaning of sewer lines by bucket type sewer machine including cost of diesel/lubricants complete in all respects. Only sewer machines will be provided by the department for the following sizes of sewer750 mm i/d | Metre | 588.00 |
| 21.103.10 | Job work for cleaning of sewer lines by bucket type sewer machine including cost of diesel/lubricants complete in all respects. Only sewer machines will be provided by the department for the following sizes of sewer900 mm i/d | Metre | 632.00 |
| 21.103.11 | Job work for cleaning of sewer lines by bucket type sewer machine including cost of diesel/lubricants complete in all respects. Only sewer machines will be provided by the department for the following sizes of sewer1050 mm i/d | Metre | 750.00 |
| 21.103.12 | Job work for cleaning of sewer lines by bucket type sewer machine including cost of diesel/lubricants complete in all respects. Only sewer machines will be provided by the department for the following sizes of sewer1300 mm i/d | Metre | 810.00 |
| 21.103.13 | Job work for cleaning of sewer lines by bucket type sewer machine including cost of diesel/lubricants complete in all respects. Only sewer machines will be provided by the department for the following sizes of sewer1800 mm i/d | Metre | 975.00 |
| 21.104.7 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)300 2 | Each | 61,286.00 |
| 21.104.8 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)400 2 | Each | 61,286.00 |
| 21.104.9 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)450 2 | Each | 61,286.00 |
| 21.104.10 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)500 2 | Each | 61,286.00 |
| 21.104.11 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)600 2.5 | Each | 61,286.00 |
| 21.104.12 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)620 2.5 | Each | 61,286.00 |
| 21.104.13 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)650 2.5 | Each | 61,286.00 |
| 21.104.14 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)700 2.5 | Each | 61,286.00 |
| 21.104.15 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)750 3 | Each | 66,480.00 |
| 21.104.16 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)800 3 | Each | 66,480.00 |
| 21.104.17 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)900 3 | Each | 66,480.00 |
| 21.104.18 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1000 5 | Each | 71,674.00 |
| 21.104.19 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1100 5 | Each | 71,674.00 |
| 21.104.20 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1200 5 | Each | 71,674.00 |
| 21.104.21 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1250 5 | Each | 71,674.00 |
| 21.104.22 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1300 5 | Each | 71,674.00 |
| 21.104.23 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1400 5 | Each | 71,674.00 |
| 21.104.24 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1500 7.5 | Each | 92,449.00 |
| 21.104.25 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1600 7.5 | Each | 92,449.00 |
| 21.104.26 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1700 7.5 | Each | 92,449.00 |
| 21.104.27 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1800 7.5 | Each | 92,449.00 |
| 21.104.28 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1900 7.5 | Each | 92,449.00 |
| 21.104.29 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2000 7.5 | Each | 92,449.00 |
| 21.104.30 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2100 7.5 | Each | 92,449.00 |
| 21.104.31 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2200 10 | Each | 1,01,798.00 |
| 21.104.32 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2300 10 | Each | 1,01,798.00 |
| 21.104.33 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2400 10 | Each | 1,01,798.00 |
| 21.104.34 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2500 10 | Each | 1,01,798.00 |
| 21.104.35 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2600 10 | Each | 1,01,798.00 |
| 21.104.36 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2700 10 | Each | 1,01,798.00 |
| 21.104.37 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2800 10 | Each | 1,01,798.00 |
| 21.104.38 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2900 10 | Each | 1,01,798.00 |
| 21.104.39 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3000 12.5 | Each | 1,20,495.00 |
| 21.104.40 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3100 12.5 | Each | 1,20,495.00 |
| 21.104.41 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3200 12.5 | Each | 1,20,495.00 |
| 21.104.42 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3300 12.5 | Each | 1,20,495.00 |
| 21.104.43 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3400 12.5 | Each | 1,20,495.00 |
| 21.104.44 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3500 15 | Each | 1,84,898.00 |
| 21.104.45 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3600 15 | Each | 1,84,898.00 |
| 21.104.46 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3700 15 | Each | 1,84,898.00 |
| 21.104.47 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3800 15 | Each | 1,84,898.00 |
| 21.104.48 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3900 15 | Each | 1,84,898.00 |
| 21.104.49 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4000 15 | Each | 1,84,898.00 |
| 21.104.50 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4100 15 | Each | 1,84,898.00 |
| 21.104.51 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4200 17.5 | Each | 2,13,983.00 |
| 21.104.52 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4300 17.5 | Each | 2,13,983.00 |
| 21.104.53 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4400 17.5 | Each | 2,13,983.00 |
| 21.104.54 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4500 17.5 | Each | 2,13,983.00 |
| 21.104.55 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4600 17.5 | Each | 2,13,983.00 |
| 21.104.56 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4700 17.5 | Each | 2,13,983.00 |
| 21.104.57 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4800 17.5 | Each | 2,13,983.00 |
| 21.104.58 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4900 20 | Each | 2,75,269.00 |
| 21.104.59 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5000 20 | Each | 2,75,269.00 |
| 21.104.60 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5100 20 | Each | 2,75,269.00 |
| 21.104.61 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5200 20 | Each | 2,75,269.00 |
| 21.104.62 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5300 20 | Each | 2,75,269.00 |
| 21.104.63 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5400 20 | Each | 2,75,269.00 |
| 21.104.64 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5500 20 | Each | 2,75,269.00 |
| 21.104.65 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5600 20 | Each | 2,75,269.00 |
| 21.104.66 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5700 22.5 | Each | 2,78,385.00 |
| 21.104.67 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5800 22.5 | Each | 2,78,385.00 |
| 21.104.68 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5900 22.5 | Each | 2,78,385.00 |
| 21.104.69 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6000 22.5 | Each | 2,78,385.00 |
| 21.104.70 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6100 22.5 | Each | 2,78,385.00 |
| 21.104.71 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6200 25 | Each | 2,96,044.00 |
| 21.104.72 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6300 25 | Each | 2,96,044.00 |
| 21.104.73 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6400 25 | Each | 2,96,044.00 |
| 21.104.74 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6500 25 | Each | 2,96,044.00 |
| 21.104.75 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6600 25 | Each | 2,96,044.00 |
| 21.104.76 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6700 25 | Each | 2,96,044.00 |
| 21.104.77 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6800 25 | Each | 2,96,044.00 |
| 21.104.78 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6900 25 | Each | 2,96,044.00 |
| 21.104.79 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7000 27.5 | Each | 3,12,664.00 |
| 21.104.80 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7100 27.5 | Each | 3,12,664.00 |
| 21.104.81 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7200 27.5 | Each | 3,12,664.00 |
| 21.104.82 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7300 27.5 | Each | 3,12,664.00 |
| 21.104.83 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7400 27.5 | Each | 3,12,664.00 |
| 21.104.84 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7500 27.5 | Each | 3,12,664.00 |
| 21.104.85 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7600 30 | Each | 3,27,207.00 |
| 21.104.86 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7700 30 | Each | 3,27,207.00 |
| 21.104.87 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7800 30 | Each | 3,27,207.00 |
| 21.104.88 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7900 30 | Each | 3,27,207.00 |
| 21.104.89 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8000 30 | Each | 3,27,207.00 |
| 21.104.90 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8100 30 | Each | 3,27,207.00 |
| 21.104.91 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8200 30 | Each | 3,27,207.00 |
| 21.104.92 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8300 30 | Each | 3,27,207.00 |
| 21.104.93 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8400 35 | Each | 3,77,067.00 |
| 21.104.94 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8500 35 | Each | 3,77,067.00 |
| 21.104.95 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8600 35 | Each | 3,77,067.00 |
| 21.104.96 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8700 35 | Each | 3,77,067.00 |
| 21.104.97 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8800 35 | Each | 3,77,067.00 |
| 21.104.98 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8900 35 | Each | 3,77,067.00 |
| 21.104.99 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)9000 35 | Each | 3,77,067.00 |
| 21.104.100 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)9100 35 | Each | 3,77,067.00 |
| 21.104.101 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)9200 35 | Each | 3,77,067.00 |
| 21.104.102 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)9300 35 | Each | 3,77,067.00 |
| 21.104.103 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)9400 35 | Each | 3,77,067.00 |
| 21.104.104 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)9500 35 | Each | 3,77,067.00 |
| 21.104.105 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)9600 35 | Each | 3,77,067.00 |
| 21.104.106 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)9700 35 | Each | 3,77,067.00 |
| 21.104.107 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)9800 40 | Each | 4,10,307.00 |
| 21.104.108 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)9900 40 | Each | 4,10,307.00 |
| 21.104.109 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)10000 40 | Each | 4,10,307.00 |
| 21.104.110 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)10500 40 | Each | 4,10,307.00 |
| 21.104.111 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)11000 40 | Each | 4,10,307.00 |
| 21.105.7 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)300 2 | Each | 61,286.00 |
| 21.105.8 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)400 2 | Each | 61,286.00 |
| 21.105.9 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)450 2 | Each | 61,286.00 |
| 21.105.10 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)500 2 | Each | 61,286.00 |
| 21.105.11 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)600 2.5 | Each | 61,286.00 |
| 21.105.12 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)620 2.5 | Each | 61,286.00 |
| 21.105.13 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)650 2.5 | Each | 61,286.00 |
| 21.105.14 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)700 5 | Each | 71,674.00 |
| 21.105.15 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)750 5 | Each | 71,674.00 |
| 21.105.16 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)800 5 | Each | 71,674.00 |
| 21.105.17 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)900 5 | Each | 71,674.00 |
| 21.105.18 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1000 5 | Each | 71,674.00 |
| 21.105.19 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1100 5 | Each | 71,674.00 |
| 21.105.20 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1200 5 | Each | 71,674.00 |
| 21.105.21 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1250 7.5 | Each | 92,449.00 |
| 21.105.22 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1300 7.5 | Each | 92,449.00 |
| 21.105.23 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1400 7.5 | Each | 92,449.00 |
| 21.105.24 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1500 7.5 | Each | 92,449.00 |
| 21.105.25 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1600 7.5 | Each | 92,449.00 |
| 21.105.26 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1700 7.5 | Each | 92,449.00 |
| 21.105.27 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1800 10 | Each | 1,01,798.00 |
| 21.105.28 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1900 10 | Each | 1,01,798.00 |
| 21.105.29 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2000 10 | Each | 1,01,798.00 |
| 21.105.30 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2100 10 | Each | 1,01,798.00 |
| 21.105.31 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2200 10 | Each | 1,01,798.00 |
| 21.105.32 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2300 10 | Each | 1,01,798.00 |
| 21.105.33 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2400 10 | Each | 1,01,798.00 |
| 21.105.34 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2500 12.5 | Each | 1,20,495.00 |
| 21.105.35 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2600 12.5 | Each | 1,20,495.00 |
| 21.105.36 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2700 12.5 | Each | 1,20,495.00 |
| 21.105.37 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2800 12.5 | Each | 1,20,495.00 |
| 21.105.38 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2900 15 | Each | 1,84,898.00 |
| 21.105.39 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3000 15 | Each | 1,84,898.00 |
| 21.105.40 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3100 15 | Each | 1,84,898.00 |
| 21.105.41 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3200 15 | Each | 1,84,898.00 |
| 21.105.42 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3300 15 | Each | 1,84,898.00 |
| 21.105.43 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3400 15 | Each | 1,84,898.00 |
| 21.105.44 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3500 17.5 | Each | 2,13,983.00 |
| 21.105.45 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3600 17.5 | Each | 2,13,983.00 |
| 21.105.46 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3700 17.5 | Each | 2,13,983.00 |
| 21.105.47 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3800 17.5 | Each | 2,13,983.00 |
| 21.105.48 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3900 17.5 | Each | 2,13,983.00 |
| 21.105.49 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4000 17.5 | Each | 2,13,983.00 |
| 21.105.50 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4100 20 | Each | 2,75,269.00 |
| 21.105.51 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4200 20 | Each | 2,75,269.00 |
| 21.105.52 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4300 20 | Each | 2,75,269.00 |
| 21.105.53 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4400 20 | Each | 2,75,269.00 |
| 21.105.54 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4500 20 | Each | 2,75,269.00 |
| 21.105.55 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4600 20 | Each | 2,75,269.00 |
| 21.105.56 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4700 20 | Each | 2,75,269.00 |
| 21.105.57 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4800 22.5 | Each | 2,78,385.00 |
| 21.105.58 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4900 22.5 | Each | 2,78,385.00 |
| 21.105.59 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5000 22.5 | Each | 2,78,385.00 |
| 21.105.60 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5100 22.5 | Each | 2,78,385.00 |
| 21.105.61 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5200 25 | Each | 2,96,044.00 |
| 21.105.62 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5300 25 | Each | 2,96,044.00 |
| 21.105.63 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5400 25 | Each | 2,96,044.00 |
| 21.105.64 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5500 25 | Each | 2,96,044.00 |
| 21.105.65 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5600 25 | Each | 2,96,044.00 |
| 21.105.66 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5700 25 | Each | 2,96,044.00 |
| 21.105.67 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5800 25 | Each | 2,96,044.00 |
| 21.105.68 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5900 27.5 | Each | 3,12,664.00 |
| 21.105.69 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6000 27.5 | Each | 3,12,664.00 |
| 21.105.70 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6100 27.5 | Each | 3,12,664.00 |
| 21.105.71 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6200 27.5 | Each | 3,12,664.00 |
| 21.105.72 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6300 30 | Each | 3,27,207.00 |
| 21.105.73 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6400 30 | Each | 3,27,207.00 |
| 21.105.74 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6500 30 | Each | 3,27,207.00 |
| 21.105.75 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6600 30 | Each | 3,27,207.00 |
| 21.105.76 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6700 30 | Each | 3,27,207.00 |
| 21.105.77 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6800 30 | Each | 3,27,207.00 |
| 21.105.78 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6900 30 | Each | 3,27,207.00 |
| 21.105.79 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7000 35 | Each | 3,77,067.00 |
| 21.105.80 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7100 35 | Each | 3,77,067.00 |
| 21.105.81 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7200 35 | Each | 3,77,067.00 |
| 21.105.82 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7300 35 | Each | 3,77,067.00 |
| 21.105.83 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7400 35 | Each | 3,77,067.00 |
| 21.105.84 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7500 35 | Each | 3,77,067.00 |
| 21.105.85 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7600 35 | Each | 3,77,067.00 |
| 21.105.86 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7700 35 | Each | 3,77,067.00 |
| 21.105.87 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7800 35 | Each | 3,77,067.00 |
| 21.105.88 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7900 35 | Each | 3,77,067.00 |
| 21.105.89 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8000 35 | Each | 3,77,067.00 |
| 21.105.90 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8100 40 | Each | 4,10,307.00 |
| 21.105.91 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8200 40 | Each | 4,10,307.00 |
| 21.105.92 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8300 40 | Each | 4,10,307.00 |
| 21.105.93 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8400 40 | Each | 4,10,307.00 |
| 21.105.94 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8500 40 | Each | 4,10,307.00 |
| 21.105.95 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8600 40 | Each | 4,10,307.00 |
| 21.105.96 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8700 40 | Each | 4,10,307.00 |
| 21.105.97 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8800 40 | Each | 4,10,307.00 |
| 21.105.98 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)8900 40 | Each | 4,10,307.00 |
| 21.105.99 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)9000 40 | Each | 4,10,307.00 |
| 21.105.100 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)9100 40 | Each | 4,10,307.00 |
| 21.105.101 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)9200 40 | Each | 4,10,307.00 |
| 21.106.7 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)300 2 | Each | 61,286.00 |
| 21.106.8 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)400 2.5 | Each | 61,286.00 |
| 21.106.9 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)450 2.5 | Each | 61,286.00 |
| 21.106.10 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)500 3 | Each | 66,480.00 |
| 21.106.11 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)600 5 | Each | 71,674.00 |
| 21.106.12 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)620 5 | Each | 71,674.00 |
| 21.106.13 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)650 5 | Each | 71,674.00 |
| 21.106.14 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)700 5 | Each | 71,674.00 |
| 21.106.15 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)750 5 | Each | 71,674.00 |
| 21.106.16 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)800 5 | Each | 71,674.00 |
| 21.106.17 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)900 5 | Each | 71,674.00 |
| 21.106.18 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1000 5 | Each | 71,674.00 |
| 21.106.19 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1100 7.5 | Each | 92,449.00 |
| 21.106.20 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1200 7.5 | Each | 92,449.00 |
| 21.106.21 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1250 7.5 | Each | 92,449.00 |
| 21.106.22 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1300 7.5 | Each | 92,449.00 |
| 21.106.23 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1400 7.5 | Each | 92,449.00 |
| 21.106.24 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1500 10 | Each | 1,01,798.00 |
| 21.106.25 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1600 10 | Each | 1,01,798.00 |
| 21.106.26 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1700 10 | Each | 1,01,798.00 |
| 21.106.27 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1800 10 | Each | 1,01,798.00 |
| 21.106.28 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1900 10 | Each | 1,01,798.00 |
| 21.106.29 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2000 12.5 | Each | 1,20,495.00 |
| 21.106.30 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2100 12.5 | Each | 1,20,495.00 |
| 21.106.31 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2200 12.5 | Each | 1,20,495.00 |
| 21.106.32 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2300 12.5 | Each | 1,20,495.00 |
| 21.106.33 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2400 15 | Each | 1,84,898.00 |
| 21.106.34 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2500 15 | Each | 1,84,898.00 |
| 21.106.35 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2600 15 | Each | 1,84,898.00 |
| 21.106.36 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2700 15 | Each | 1,84,898.00 |
| 21.106.37 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2800 15 | Each | 1,84,898.00 |
| 21.106.38 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2900 17.5 | Each | 2,13,983.00 |
| 21.106.39 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3000 17.5 | Each | 2,13,983.00 |
| 21.106.40 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3100 17.5 | Each | 2,13,983.00 |
| 21.106.41 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3200 17.5 | Each | 2,13,983.00 |
| 21.106.42 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3300 20 | Each | 2,75,789.00 |
| 21.106.43 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3400 20 | Each | 2,75,789.00 |
| 21.106.44 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3500 20 | Each | 2,75,789.00 |
| 21.106.45 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3600 20 | Each | 2,75,789.00 |
| 21.106.46 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3700 20 | Each | 2,75,789.00 |
| 21.106.47 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3800 22.5 | Each | 2,78,385.00 |
| 21.106.48 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3900 22.5 | Each | 2,78,385.00 |
| 21.106.49 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4000 22.5 | Each | 2,78,385.00 |
| 21.106.50 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4100 22.5 | Each | 2,78,385.00 |
| 21.106.51 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4200 25 | Each | 2,96,044.00 |
| 21.106.52 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4300 25 | Each | 2,96,044.00 |
| 21.106.53 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4400 25 | Each | 2,96,044.00 |
| 21.106.54 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4500 25 | Each | 2,96,044.00 |
| 21.106.55 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4600 25 | Each | 2,96,044.00 |
| 21.106.56 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4700 27.5 | Each | 3,12,664.00 |
| 21.106.57 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4800 27.5 | Each | 3,12,664.00 |
| 21.106.58 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4900 27.5 | Each | 3,12,664.00 |
| 21.106.59 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5000 27.5 | Each | 3,12,664.00 |
| 21.106.60 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5100 30 | Each | 3,27,207.00 |
| 21.106.61 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5200 30 | Each | 3,27,207.00 |
| 21.106.62 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5300 30 | Each | 3,27,207.00 |
| 21.106.63 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5400 30 | Each | 3,27,207.00 |
| 21.106.64 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5500 30 | Each | 3,27,207.00 |
| 21.106.65 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5600 35 | Each | 3,77,067.00 |
| 21.106.66 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5700 35 | Each | 3,77,067.00 |
| 21.106.67 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5800 35 | Each | 3,77,067.00 |
| 21.106.68 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5900 35 | Each | 3,77,067.00 |
| 21.106.69 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6000 35 | Each | 3,77,067.00 |
| 21.106.70 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6100 35 | Each | 3,77,067.00 |
| 21.106.71 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6200 35 | Each | 3,77,067.00 |
| 21.106.72 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6300 35 | Each | 3,77,067.00 |
| 21.106.73 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6400 35 | Each | 3,77,067.00 |
| 21.106.74 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6500 40 | Each | 4,10,307.00 |
| 21.106.75 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6600 40 | Each | 4,10,307.00 |
| 21.106.76 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6700 40 | Each | 4,10,307.00 |
| 21.106.77 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6800 40 | Each | 4,10,307.00 |
| 21.106.78 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6900 40 | Each | 4,10,307.00 |
| 21.106.79 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7000 40 | Each | 4,10,307.00 |
| 21.106.80 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7100 40 | Each | 4,10,307.00 |
| 21.106.81 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7200 40 | Each | 4,10,307.00 |
| 21.106.82 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)7300 40 | Each | 4,10,307.00 |
| 21.107.5 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)200 2 | Each | 61,286.00 |
| 21.107.6 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)250 2 | Each | 61,286.00 |
| 21.107.7 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)300 2 | Each | 61,286.00 |
| 21.107.8 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)400 3 | Each | 66,480.00 |
| 21.107.9 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)450 3 | Each | 66,480.00 |
| 21.107.10 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)500 3 | Each | 66,480.00 |
| 21.107.11 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)600 5 | Each | 71,674.00 |
| 21.107.12 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)620 5 | Each | 71,674.00 |
| 21.107.13 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)650 5 | Each | 71,674.00 |
| 21.107.14 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)700 5 | Each | 71,674.00 |
| 21.107.15 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)750 5 | Each | 71,674.00 |
| 21.107.16 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)800 5 | Each | 71,674.00 |
| 21.107.17 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)900 7.5 | Each | 92,449.00 |
| 21.107.18 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1000 7.5 | Each | 92,449.00 |
| 21.107.19 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1100 7.5 | Each | 92,449.00 |
| 21.107.20 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1200 10 | Each | 1,01,798.00 |
| 21.107.21 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1250 10 | Each | 1,01,798.00 |
| 21.107.22 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1300 10 | Each | 1,01,798.00 |
| 21.107.23 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1400 10 | Each | 1,01,798.00 |
| 21.107.24 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1500 10 | Each | 1,01,798.00 |
| 21.107.25 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1600 12.5 | Each | 1,20,495.00 |
| 21.107.26 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1700 12.5 | Each | 1,20,495.00 |
| 21.107.27 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1800 12.5 | Each | 1,20,495.00 |
| 21.107.28 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1900 12.5 | Each | 1,20,495.00 |
| 21.107.29 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2000 15 | Each | 1,84,898.00 |
| 21.107.30 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2100 15 | Each | 1,84,898.00 |
| 21.107.31 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2200 15 | Each | 1,84,898.00 |
| 21.107.32 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2300 15 | Each | 1,84,898.00 |
| 21.107.33 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2400 17.5 | Each | 2,13,983.00 |
| 21.107.34 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2500 17.5 | Each | 2,13,983.00 |
| 21.107.35 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2600 17.5 | Each | 2,13,983.00 |
| 21.107.36 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2700 20 | Each | 2,75,269.00 |
| 21.107.37 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2800 20 | Each | 2,75,269.00 |
| 21.107.38 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2900 20 | Each | 2,75,269.00 |
| 21.107.39 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3000 20 | Each | 2,75,269.00 |
| 21.107.40 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3100 20 | Each | 2,75,269.00 |
| 21.107.41 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3200 22.5 | Each | 2,78,385.00 |
| 21.107.42 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3300 22.5 | Each | 2,78,385.00 |
| 21.107.43 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3400 22.5 | Each | 2,78,385.00 |
| 21.107.44 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3500 25 | Each | 2,96,044.00 |
| 21.107.45 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3600 25 | Each | 2,96,044.00 |
| 21.107.46 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3700 25 | Each | 2,96,044.00 |
| 21.107.47 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3800 25 | Each | 2,96,044.00 |
| 21.107.48 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3900 27.5 | Each | 3,12,664.00 |
| 21.107.49 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4000 27.5 | Each | 3,12,664.00 |
| 21.107.50 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4100 27.5 | Each | 3,12,664.00 |
| 21.107.51 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4200 30 | Each | 3,27,207.00 |
| 21.107.52 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4300 30 | Each | 3,27,207.00 |
| 21.107.53 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4400 30 | Each | 3,27,207.00 |
| 21.107.54 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4500 30 | Each | 3,27,207.00 |
| 21.107.55 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4600 30 | Each | 3,27,207.00 |
| 21.107.56 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4700 35 | Each | 3,77,067.00 |
| 21.107.57 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4800 35 | Each | 3,77,067.00 |
| 21.107.58 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4900 35 | Each | 3,77,067.00 |
| 21.107.59 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5000 35 | Each | 3,77,067.00 |
| 21.107.60 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5100 35 | Each | 3,77,067.00 |
| 21.107.61 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5200 35 | Each | 3,77,067.00 |
| 21.107.62 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5300 35 | Each | 3,77,067.00 |
| 21.107.63 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5400 40 | Each | 4,10,307.00 |
| 21.107.64 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5500 40 | Each | 4,10,307.00 |
| 21.107.65 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5600 40 | Each | 4,10,307.00 |
| 21.107.66 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5700 40 | Each | 4,10,307.00 |
| 21.107.67 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5800 40 | Each | 4,10,307.00 |
| 21.107.68 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5900 40 | Each | 4,10,307.00 |
| 21.107.69 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6000 40 | Each | 4,10,307.00 |
| 21.107.70 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 18.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)6100 40 | Each | 4,10,307.00 |
| 21.108.4 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)150 1 | Each | 35,318.00 |
| 21.108.5 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)200 2 | Each | 61,286.00 |
| 21.108.6 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)250 2 | Each | 61,286.00 |
| 21.108.7 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)300 2.5 | Each | 61,286.00 |
| 21.108.8 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)400 3 | Each | 66,480.00 |
| 21.108.9 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)450 3 | Each | 66,480.00 |
| 21.108.10 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)500 5 | Each | 71,674.00 |
| 21.108.11 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)600 5 | Each | 71,674.00 |
| 21.108.12 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)620 5 | Each | 71,674.00 |
| 21.108.13 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)650 5 | Each | 71,674.00 |
| 21.108.14 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)700 5 | Each | 71,674.00 |
| 21.108.15 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)750 7.5 | Each | 92,449.00 |
| 21.108.16 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)800 7.5 | Each | 92,449.00 |
| 21.108.17 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)900 7.5 | Each | 92,449.00 |
| 21.108.18 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1000 7.5 | Each | 92,449.00 |
| 21.108.19 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1100 10 | Each | 1,01,798.00 |
| 21.108.20 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1200 10 | Each | 1,01,798.00 |
| 21.108.21 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1250 10 | Each | 1,01,798.00 |
| 21.108.22 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1300 10 | Each | 1,01,798.00 |
| 21.108.23 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1400 10 | Each | 1,01,798.00 |
| 21.108.24 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1500 12.5 | Each | 1,20,495.00 |
| 21.108.25 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1600 12.5 | Each | 1,20,495.00 |
| 21.108.26 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1700 12.5 | Each | 1,20,495.00 |
| 21.108.27 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1800 15 | Each | 1,84,898.00 |
| 21.108.28 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1900 15 | Each | 1,84,898.00 |
| 21.108.29 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2000 15 | Each | 1,84,898.00 |
| 21.108.30 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2100 15 | Each | 1,84,898.00 |
| 21.108.31 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2200 17.5 | Each | 2,13,983.00 |
| 21.108.32 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2300 17.5 | Each | 2,13,983.00 |
| 21.108.33 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2400 17.5 | Each | 2,13,983.00 |
| 21.108.34 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2500 20 | Each | 2,75,269.00 |
| 21.108.35 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2600 20 | Each | 2,75,269.00 |
| 21.108.36 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2700 20 | Each | 2,75,269.00 |
| 21.108.37 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2800 20 | Each | 2,75,269.00 |
| 21.108.38 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2900 22.5 | Each | 2,78,385.00 |
| 21.108.39 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3000 22.5 | Each | 2,78,385.00 |
| 21.108.40 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3100 22.5 | Each | 2,78,385.00 |
| 21.108.41 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3200 25 | Each | 2,96,044.00 |
| 21.108.42 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3300 25 | Each | 2,96,044.00 |
| 21.108.43 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3400 25 | Each | 2,96,044.00 |
| 21.108.44 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3500 25 | Each | 2,96,044.00 |
| 21.108.45 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3600 27.5 | Each | 3,12,664.00 |
| 21.108.46 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3700 27.5 | Each | 3,12,664.00 |
| 21.108.47 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3800 30 | Each | 3,27,207.00 |
| 21.108.48 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3900 30 | Each | 3,27,207.00 |
| 21.108.49 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4000 30 | Each | 3,27,207.00 |
| 21.108.50 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4100 30 | Each | 3,27,207.00 |
| 21.108.51 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4200 35 | Each | 3,77,067.00 |
| 21.108.52 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4300 35 | Each | 3,77,067.00 |
| 21.108.53 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4400 35 | Each | 3,77,067.00 |
| 21.108.54 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4500 35 | Each | 3,77,067.00 |
| 21.108.55 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4600 35 | Each | 3,77,067.00 |
| 21.108.56 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4700 35 | Each | 3,77,067.00 |
| 21.108.57 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4800 35 | Each | 3,77,067.00 |
| 21.108.58 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4900 40 | Each | 4,10,307.00 |
| 21.108.59 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5000 40 | Each | 4,10,307.00 |
| 21.108.60 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5100 40 | Each | 4,10,307.00 |
| 21.108.61 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5200 40 | Each | 4,10,307.00 |
| 21.108.62 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5300 40 | Each | 4,10,307.00 |
| 21.108.63 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5400 40 | Each | 4,10,307.00 |
| 21.108.64 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 20.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)5500 40 | Each | 4,10,307.00 |
| 21.109.3 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)100 1 | Each | 35,318.00 |
| 21.109.4 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)150 2 | Each | 61,286.00 |
| 21.109.5 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)200 2 | Each | 61,286.00 |
| 21.109.6 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)250 2.5 | Each | 61,286.00 |
| 21.109.7 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)300 3 | Each | 66,480.00 |
| 21.109.8 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)400 5 | Each | 71,674.00 |
| 21.109.9 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)450 5 | Each | 71,674.00 |
| 21.109.10 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)500 5 | Each | 71,674.00 |
| 21.109.11 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)600 5 | Each | 71,674.00 |
| 21.109.12 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)620 5 | Each | 71,674.00 |
| 21.109.13 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)650 7.5 | Each | 92,449.00 |
| 21.109.14 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)700 7.5 | Each | 92,449.00 |
| 21.109.15 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)750 7.5 | Each | 92,449.00 |
| 21.109.16 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)800 7.5 | Each | 92,449.00 |
| 21.109.17 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)900 10 | Each | 1,01,798.00 |
| 21.109.18 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1000 10 | Each | 1,01,798.00 |
| 21.109.19 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1100 10 | Each | 1,01,798.00 |
| 21.109.20 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1200 12.5 | Each | 1,20,495.00 |
| 21.109.21 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1250 12.5 | Each | 1,20,495.00 |
| 21.109.22 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1300 12.5 | Each | 1,20,495.00 |
| 21.109.23 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1400 12.5 | Each | 1,20,495.00 |
| 21.109.24 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1500 15 | Each | 1,84,898.00 |
| 21.109.25 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1600 15 | Each | 1,84,898.00 |
| 21.109.26 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1700 15 | Each | 1,84,898.00 |
| 21.109.27 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1800 17.5 | Each | 2,13,983.00 |
| 21.109.28 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1900 17.5 | Each | 2,13,983.00 |
| 21.109.29 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2000 20 | Each | 2,75,269.00 |
| 21.109.30 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2100 20 | Each | 2,75,269.00 |
| 21.109.31 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2200 20 | Each | 2,75,269.00 |
| 21.109.32 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2300 22.5 | Each | 3,43,307.00 |
| 21.109.33 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2400 22.5 | Each | 3,43,307.00 |
| 21.109.34 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2500 25 | Each | 2,96,044.00 |
| 21.109.35 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2600 25 | Each | 2,96,044.00 |
| 21.109.36 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2700 25 | Each | 2,96,044.00 |
| 21.109.37 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2800 25 | Each | 2,96,044.00 |
| 21.109.38 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2900 30 | Each | 3,27,207.00 |
| 21.109.39 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3000 30 | Each | 3,27,207.00 |
| 21.109.40 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3100 30 | Each | 3,27,207.00 |
| 21.109.41 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3200 30 | Each | 3,27,207.00 |
| 21.109.42 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3300 30 | Each | 3,27,207.00 |
| 21.109.43 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3400 35 | Each | 3,77,067.00 |
| 21.109.44 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3500 35 | Each | 3,77,067.00 |
| 21.109.45 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3600 35 | Each | 3,77,067.00 |
| 21.109.46 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3700 35 | Each | 3,77,067.00 |
| 21.109.47 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3800 35 | Each | 3,77,067.00 |
| 21.109.48 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3900 40 | Each | 4,10,307.00 |
| 21.109.49 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4000 40 | Each | 4,10,307.00 |
| 21.109.50 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4100 40 | Each | 4,10,307.00 |
| 21.109.51 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4200 40 | Each | 4,10,307.00 |
| 21.109.52 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4300 40 | Each | 4,10,307.00 |
| 21.109.53 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 25.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)4400 40 | Each | 4,10,307.00 |
| 21.110.3 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)100 1 | Each | 35,318.00 |
| 21.110.4 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)150 2 | Each | 61,286.00 |
| 21.110.5 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)200 2.5 | Each | 61,286.00 |
| 21.110.6 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)250 3 | Each | 66,480.00 |
| 21.110.7 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)300 5 | Each | 71,674.00 |
| 21.110.8 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)400 5 | Each | 71,674.00 |
| 21.110.9 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)450 5 | Each | 71,674.00 |
| 21.110.10 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)500 5 | Each | 71,674.00 |
| 21.110.11 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)600 7.5 | Each | 92,449.00 |
| 21.110.12 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)620 7.5 | Each | 92,449.00 |
| 21.110.13 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)650 7.5 | Each | 92,449.00 |
| 21.110.14 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)700 7.5 | Each | 92,449.00 |
| 21.110.15 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)750 10 | Each | 1,01,798.00 |
| 21.110.16 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)800 10 | Each | 1,01,798.00 |
| 21.110.17 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)900 10 | Each | 1,01,798.00 |
| 21.110.18 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1000 12.5 | Each | 1,20,495.00 |
| 21.110.19 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1100 12.5 | Each | 1,20,495.00 |
| 21.110.20 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1200 15 | Each | 1,84,898.00 |
| 21.110.21 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1250 15 | Each | 1,84,898.00 |
| 21.110.22 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1300 15 | Each | 1,84,898.00 |
| 21.110.23 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1400 15 | Each | 1,84,898.00 |
| 21.110.24 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1500 17.5 | Each | 2,13,983.00 |
| 21.110.25 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1600 17.5 | Each | 2,13,983.00 |
| 21.110.26 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1700 20 | Each | 2,75,269.00 |
| 21.110.27 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1800 20 | Each | 2,75,269.00 |
| 21.110.28 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)1900 22.5 | Each | 2,78,385.00 |
| 21.110.29 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2000 22.5 | Each | 2,78,385.00 |
| 21.110.30 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2100 25 | Each | 2,96,044.00 |
| 21.110.31 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2200 25 | Each | 2,96,044.00 |
| 21.110.32 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2300 25 | Each | 2,96,044.00 |
| 21.110.33 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2400 27.5 | Each | 3,12,664.00 |
| 21.110.34 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2500 27.5 | Each | 3,12,664.00 |
| 21.110.35 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2600 30 | Each | 3,27,207.00 |
| 21.110.36 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2700 30 | Each | 3,27,207.00 |
| 21.110.37 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2800 35 | Each | 3,77,067.00 |
| 21.110.38 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)2900 35 | Each | 3,77,067.00 |
| 21.110.39 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3000 35 | Each | 3,77,067.00 |
| 21.110.40 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3100 35 | Each | 3,77,067.00 |
| 21.110.41 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3200 35 | Each | 3,77,067.00 |
| 21.110.42 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3300 40 | Each | 4,10,307.00 |
| 21.110.43 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3400 40 | Each | 4,10,307.00 |
| 21.110.44 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3500 40 | Each | 4,10,307.00 |
| 21.110.45 | Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (LPM) (BHP)3600 40 WASH BASINS, KITCHEN SINKS AND HARDWARES | Each | 4,10,307.00 |
Other chapters in this schedule
- Earth Work and Rock Cutting (71)
- Dismantling and Demolition (93)
- Concrete and RCC Work (148)
- Brick Work and Stone Masonry (101)
- Cladding Work (61)
- Hoisting and Roofing (126)
- Flooring and Dados (181)
- Finishing Works (129)
- Wood Work, PVC and Aluminum Doors and Windows (291)
- Steel and Iron Work (64)
- Lining and Outlets (71)
- Deep Foundations (141)
- River and Canal Protection Works (57)
- Road Works (112)
- Miscellaneous (Buildings) (114)
- Water Supply (879)
- Sanitary Installations (642)
- Horticulture and Land Scaping (125)
- Bridges (Substructure, Superstructure, Bearings & Expansion Joints) (32)
- Water Proofing and Heat Insulation of Buildings (54)
- Structural & Aluminium Glazing (7)
- Repairs and Maintenance of Buildings (146)
- Strengthening and Retrofitting of Buildings (34)
- Innovating Technologies, New Materials and Solar Panels (123)
- Rain Water Harvesting & Tube wells (45)
- Road Furniture (82)
- Miscellaneous (Roads) (35)
Pricing sewerage and drainage against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works