Haryana SOR 2021
Finishing Works rates
129 finishing works items from the Haryana PWD (Buildings & Roads), effective 2021-03-31.
Finishing Works rates in the Haryana Haryana Schedule of Rates 2021 run from ₹2.00 to ₹346.00. Transcribed from Haryana PWD (B&R) — Haryana Schedule of Rates 2021, issued with the approval of the Direction Committee of Chief Engineers, 31 March 2021. Reference only — verify against the official source before pricing a bid.
/
129 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 11.3 | Neat cement punning. CEMENT PLASTER (IN FINE SAND) | Sqm | 33.00 |
| 11.13.1 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement12 mm cement plaster | Sqm | 138.00 |
| 11.13.2 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement20 mm cement plaster | Sqm | 203.00 |
| 11.17 | Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge CEMENT PLASTER IN TWO COATS | Sqm | 262.00 |
| 11.24 | White Cement based polymer modified self curing compound in powder form used for levelling and plastering material, applied on red bricks, Flyash bricks, MC & Concrete blocks for internal and external work. Technical Specifications: i) Degree Of Whiteness (in terms of reflection) ->80% ii) Bulk density - 1.4 to 1. 5 kg/litre iii) Pot life - 110-180 minutes iv) Water retentivity ->95% v) Compressive strength @28 days> 10N/mm2 vi) Water absorption 30 minutes @ 28 days - <0.8 POINTING ON BRICK WORK | Sqm | 108.00 |
| 11.25.1 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand)Flush / Ruled/ Struck or weathered pointing | Sqm | 50.00 |
| 11.25.2 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand)Raised and cut pointing POINTING ON TILE BRICK WORK | Sqm | 105.00 |
| 11.26.1 | Pointing on tile brick work with cement mortar 1:3 (1 cement: 3 fine sand)Flush/ Ruled/ Struck or weathered pointing POINTING ON STONE WORK | Sqm | 51.00 |
| 11.27.1 | Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand)Flush/ Ruled pointing | Sqm | 66.00 |
| 11.27.2 | Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand)Raised and cut pointing | Sqm | 130.00 |
| 11.28 | Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement: 3 marble dust) | Sqm | 149.00 |
| 11.29.1 | Pointing on stone slab ceiling with cement mortar 1:2 (1 cement: 2 fine sand)Flush/ Ruled pointing | Sqm | 46.00 |
| 11.30 | Extra for pointing on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or part there of | Sqm | 2.00 |
| 11.31 | Lime surkhi pointing 2:3 weathered and struck on brick and tile work ROUGH CAST PLASTER | Sqm | 58.00 |
| 11.32.1 | Rough cast plaster up to 1 O m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 1 O mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 1 O mm cement plaster 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cementOrdinary cement finish using ordinary cement PEBBLE DASH PLASTER | Sqm | 275.00 |
| 11.33 | Pebble dash plaster up to 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1: 4 (1 cement: 4 coarse sand) and top layer 1 O mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement | Sqm | 254.00 |
| 11.35 | Extra for plastering exteriorw alls of height more than 1 O m from ground level for every additional height of 3 m or part thereof | Sqm | 26.00 |
| 11.36.1 | Extra for plastering on circular work not exceeding 6 m in radiusIn one coat | Sqm | 11.00 |
| 11.36.2 | Extra for plastering on circular work not exceeding 6 m in radiusIn two coats | Sqm | 17.00 |
| 11.37.1 | Extra for plastering done on moulding, cornices or architraves including neat finish to line and levelIn one coat | Sqm | 148.00 |
| 11.37.2 | Extra for plastering done on moulding, cornices or architraves including neat finish to line and levelIn two coats | Sqm | 218.00 |
| 11.38.1 | Extra for plasteringSpherical ceiling | Sqm | 40.00 |
| 11.38.2 | Extra for plasteringGroined ceiling | Sqm | 40.00 |
| 11.38.3 | Extra for plasteringFlewing soffits WASHED STONE GRIT PLASTER | Sqm | 24.00 |
| 11.39 | Washed stone grit plaster on exterior walls height up to 1O metre above ground level, in two layers, under layer 12 mm cement plaster 1: 4 (1 cement: 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer@ 2 kg of cement per square metre, top layer 15 mm cement plaster 1: 1 / 2:2 ( 1 cement: 112 coarse sand: 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately) | Sqm | 346.00 |
| 11.40.1 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge15 mm wide and 15 mm deep groove | Metre | 27.00 |
| 11.40.2 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge20 mm wide and 15 mm deep groove | Metre | 27.00 |
| 11.41 | Extra for washed grit plaster on exterior walls of height more than 1 O m from ground level for every additional height of 3 m or part thereof | Sqm | 40.00 |
| 11.42 | Extra for washed stone grit plaster on circular work not exceeding 6 m in radius (in two coats) | Sqm | 37.00 |
| 11.43 | Forming groove of uniform size from 12x12 mm and up to 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminium channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge | Metre | 69.00 |
| 11.44 | Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. ARTIFICIAL STONE PLASTER | Sqm | 81.00 |
| 11.45 | Extra for lining out plaster to imitate stone or concrete blocks walling. GYPSUM LIGHTWEIGHT PLASTER | Sqm | 31.00 |
| 11.46 | Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ per1ite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. PLAIN CEMENT MORTAR BANDS | Sqm | 210.00 |
| 11.49 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement: 3 fine sand) | Sqm | 92.00 |
| 11.50 | Smooth finishing of the exposed surface of R.C.C. work with 10 mm thick cement mortar 1: 3 (1 Cement: 3 fine sand) | Sqm | 123.00 |
| 11.51 | Smooth finishing of the exposed surface of R.C.C. work with 10 mm thick cement mortar 1:4 (1 Cement: 4 fine sand) | Sqm | 111.00 |
| 11.52 | Cement rendering on plaster 1 mm thick | Sqm | 31.00 |
| 11.53 | Extra for rendering smooth the top of suspended floors, landings and staircases (treads and risers) with cement mortar 1:2 (1 cement: 2 coarse sand), including a floating coat of neat cement and protecting the surface with a layer of 7.5 cm of earth laid over 15 mm of fine sand in case of suspended floor and bricks laid in mud mortar in case of landings and steps, including subsequent removal and cleaning of the same | Sqm | 66.00 |
| 11.54 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. INTERIOR FINISHING | Metre | 35.00 |
| 11.55 | Corbelling around almirah including 12mm thick cement plaster 1:6 | Metre | 102.00 |
| 11.57 | Providing & laying average 6mm thick POP Coating on walls, Ceiling, beams and lintels etc. complete in all respects as approved by the Engineer-In- Charge | Sqm | 76.00 |
| 11.58 | Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete | Sqm | 36.00 |
| 11.59 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete | Sqm | 79.00 |
| 11.60 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete | Sqm | 66.00 |
| 11.61.1 | White washing with lime to give an even shadeNew work (three or more coats) | Sqm | 15.00 |
| 11.62.1 | Colour washing such as green, blue or buff to give an even shadeNew work (two or more coats) with a base coat of white washing with lime | Sqm | 20.00 |
| 11.62.2 | Colour washing such as green, blue or buff to give an even shadeNew work (two or more coats) with a base coat of whiting | Sqm | 20.00 |
| 11.63 | Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade | Sqm | 33.00 |
| 11.64.1 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and including water thinnable priming coat with cement primer | Sqm | 50.00 |
| 11.65.1 | Distempering with 1st quality acrylic distemper (ready mixed) having voe content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specificationTwo or more coats on new work | Sqm | 35.00 |
| 11.66.1 | Distempering with 1st quality acrylic distemper, having voe (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colourOne coat | Sqm | 21.00 |
| 11.66.2 | Distempering with 1st quality acrylic distemper, having voe (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colourTwo coats | Sqm | 31.00 |
| 11.67.1 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surfaceWater thinnable cement primer | Sqm | 25.00 |
| 11.70 | Extra for using White Cement based primer modified with high performance polymers, applied as an undercoat for exterior/interior cementitious surfaces before paint Technical Specifications: i) Degree of whiteness (in terms of reflectance) >93% ii) Fineness (Residue on 63 Micron Sieve) - Minimum 4.0 iii) Bulk Density - 0.8 to 0.9 kg/litre iv) Viscosity by Brookfield, 50rpm, Spindle no RV 05 at 25 - 300cP to 600cP v) Pot Life - Min. 1B O minutes vi) Coverage after 1 st coat - 80-1 00 sqft/kg vii) Adhesion cross-cut on 2 coat application after 48 hours - Min. 3B | Sqm | 15.00 |
| 11.71 | Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade: 11. 71.1 Two or more coats on new work | Sqm | 61.00 |
| 11.72.1 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfacesOne coat | Sqm | 43.00 |
| 11.72.2 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfacesTwo coats | Sqm | 68.00 |
| 11.73 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. 11.7 3.1 On steel work 11.7 3.2 On concrete work | Sqm | 90.00 |
| 11.74.1 | Wall painting with acrylic emulsion paint, having voe (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colourOne coat | Sqm | 29.00 |
| 11.74.2 | Wall painting with acrylic emulsion paint, having voe (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colourTwo coats | Sqm | 43.00 |
| 11.75.1 | Wall painting with premium acrylic emulsion paint of interior grade, having voe (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colourOne coat | Sqm | 32.00 |
| 11.75.2 | Wall painting with premium acrylic emulsion paint of interior grade, having voe (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colourTwo coats | Sqm | 49.00 |
| 11.76 | Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete | Sqm | 41.00 |
| 11.77 | Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc | Sqm | 21.00 |
| 11.78 | Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade | Sqm | 35.00 |
| 11.79.1 | Painting with oil type wood preservative of approved brand and manufactureNew work (two or more coats) | Sqm | 24.00 |
| 11.80 | Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant | Sqm | 194.00 |
| 11.81 | Coal tarring two coats on new wood work using 0.16 litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively | Sqm | 21.00 |
| 11.82.1 | Painting the wooden I metal surface with synthetic enamel paint of approved brand and manufacture to give an even shadeTwo or more coats on new work | Sqm | 55.00 |
| 11.83.1 | Painting over the wooden surface with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeTwo or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | Sqm | 54.00 |
| 11.84.1 | Painting over the wooden/metal surface with aluminium paint of approved brand and manufacture to give an even shadeTwo or more coats on new work | Sqm | 47.00 |
| 11.85.1 | Painting over wooden/metal surface with acid proof paint of approved brand and manufacture of required colour to give an even shadeTwo or more coats on new work | Sqm | 62.00 |
| 11.86.1 | Varnishing with varnish of approved brand and manufactureTwo or more coats of glue sizing with copal varnish over an under coat of flatting varnish | Sqm | 78.00 |
| 11.86.2 | Varnishing with varnish of approved brand and manufactureTwo or more coats glue sizing with spar varnish or an under coat of flatting varnish | Sqm | 79.00 |
| 11.87.1 | French spirit polishingTwo or more coats on new works including a coat of wood filler | Sqm | 162.00 |
| 11.88.1 | Polishing on wood work with ready mixed wax polish of approved brand and manufactureNew work | Sqm | 62.00 |
| 11.89 | Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture | Sqm | 28.00 |
| 11.90.1 | Varnishing with varnish of approved brand and manufactureOne or more coats with copal varnish | Sqm | 31.00 |
| 11.90.2 | Varnishing with varnish of approved brand and manufactureOne or more coats with spar varnish | Sqm | 32.00 |
| 11.91 | Melamine polishing on wood work (one or more coat) | Sqm | 63.00 |
| 11.92.1 | Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shadeTwo or more coats on new work EXTERIOR FINISHING WALL AND ROOF SURFACES | Sqm | 74.00 |
| 11.93.1 | Finishing walls with water proofing cement paint of required shadeNew work (Two or more coats applied@ 3.84 kg/10 sqm) | Sqm | 44.00 |
| 11.94.1 | Finishing walls with textured exterior paint of required shadeNew work (Two or more coats applied @ 3.28 litre/1O sqm) over | Sqm | 152.00 |
| 11.95.1 | Finishing walls with Acrylic Smooth exterior paint of required shadeNew work (Two or more coat applied @ 1.67 litre/1 O sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | Sqm | 98.00 |
| 11.96.1 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shadeNew work (Two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | Sqm | 95.00 |
| 11.97.1 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specificationsTwo or more coats applied on walls @ 1.25 litre/10 sqm over and including one coat of Special primer applied@ 0. 75 litre /10 sqm | Sqm | 79.00 |
| 11.97.2 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specificationsPainting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 litre/1 O sqm over an under coat of primer applied @0.75 litre/10 sqm of approved brand and manufacture | Sqm | 70.00 |
| 11.97.3 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specificationsPainting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied@ 0.90 litre/10 sqm over an under coat of primer applied @ 0.80 litre/1 O sqm of approved brand and manufacture | Sqm | 66.00 |
| 11.98.1 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gmnitre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additivesNew work (Two or more coats applied@ 1.43 litre/ 10 sqm Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm | Sqm | 96.00 |
| 11.99.1 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeNew work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution | Sqm | 60.00 |
| 11.101.1 | Painting (two or more coats) on Cl/SCI rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work75 mm diameter pipes | Metre | 18.00 |
| 11.101.2 | Painting (two or more coats) on Cl/SCI rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work100 mm diameter pipes | Metre | 23.00 |
| 11.101.3 | Painting (two or more coats) on Cl/SCI rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work150 mm diameter pipes | Metre | 34.00 |
| 11.102.1 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work100 mm diameter pipes | Metre | 27.00 |
| 11.102.2 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work150 mm diameter pipes | Metre | 39.00 |
| 11.103.1 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shadeTwo or more coats on new work | Sqm | 44.00 |
| 11.104.1 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work75 mm diameter pipes | Metre | 18.00 |
| 11.104.2 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work100 mm diameter pipes | Metre | 26.00 |
| 11.104.3 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work150 mm diameter pipes | Metre | 38.00 |
| 11.105.1 | Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work100 mm diameter pipe | Metre | 22.00 |
| 11.105.2 | Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work75 mm diameter pipe | Metre | 17.00 |
| 11.106 | Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality ) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work | Each | 340.00 |
| 11.107.1 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work15 mm diameter pipe | Metre | 4.00 |
| 11.107.2 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work20 mm diameter pipe | Metre | 5.00 |
| 11.107.3 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work25 mm diameter pipe | Metre | 7.00 |
| 11.107.4 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work32 mm diameter pipe | Metre | 9.00 |
| 11.107.5 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work40 mm diameter pipe | Metre | 10.00 |
| 11.107.6 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work50 mm diameter pipe | Metre | 12.00 |
| 11.108.1 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality15 mm diameter pipe | Metre | 2.00 |
| 11.108.2 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality20 mm diameter pipe | Metre | 3.00 |
| 11.108.3 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality25 mm diameter pipe | Metre | 4.00 |
| 11.108.4 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality32 mm diameter pipe | Metre | 5.00 |
| 11.108.5 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality40 mm diameter pipe | Metre | 6.00 |
| 11.108.6 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality50 mm diameter pipe | Metre | 7.00 |
| 11.108.7 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality65 mm diameter pipe | Metre | 9.00 |
| 11.108.8 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality80 mm diameter pipe MISCELLANEOUS ITEMS | Metre | 10.00 |
| 11.109 | Extra for mixing Soap solution, 1 percent for cement plastering. 11.11O Satna lime wash on walls with one coat | Sqm | 15.00 |
| 11.111 | Oiling woodwork with raw linseed oil (2nd quality oil) | Sqm | 16.00 |
| 11.112 | Oiling wood work with raw linseed oil (2nd quality oil) and water | Sqm | 13.00 |
| 11.114 | Painting (one or more coats) with black Japan paint of approved brand and | Sqm | 30.00 |
| 11.115 | Painting one coat with solignum with 2nd quality paint | Sqm | 15.00 |
| 11.116 | Painting two coats with solignum with 2nd quality paint | Sqm | 25.00 |
| 11.117 | Painting one coat with creosote | Sqm | 14.00 |
| 11.118 | Painting two coats with creosote | Sqm | 22.00 |
| 11.119 | Coal tarring one coat | Sqm | 20.00 |
| 11.120 | Coal tarring two coats | Sqm | 29.00 |
| 11.121 | Polyurethane polish (PU) two or more coats to give required finish including two coat of wood sealer Including Preparation of surface/base complete as per specification | Sqm | 283.00 |
| 11.122 | Painting two or more coats Italian Pigmented PU white glossy or matt in all shades on wood work surface to give an even shade Including Preperation of surface/base complete as per specification | Sqm | 273.00 |
| 11.123 | Wall painting with (bio grade)plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) Generally used in hospital buildings etc. complete as per Specifications. A.WOODWORK DOOR FRAMES, SHUTTERS AND WINDOWS | Sqm | 96.00 |
Other chapters in this schedule
- Earth Work and Rock Cutting (71)
- Dismantling and Demolition (93)
- Concrete and RCC Work (148)
- Brick Work and Stone Masonry (101)
- Cladding Work (61)
- Hoisting and Roofing (126)
- Flooring and Dados (181)
- Wood Work, PVC and Aluminum Doors and Windows (291)
- Steel and Iron Work (64)
- Lining and Outlets (71)
- Deep Foundations (141)
- River and Canal Protection Works (57)
- Road Works (112)
- Miscellaneous (Buildings) (114)
- Water Supply (879)
- Sewerage and Drainage (1019)
- Sanitary Installations (642)
- Horticulture and Land Scaping (125)
- Bridges (Substructure, Superstructure, Bearings & Expansion Joints) (32)
- Water Proofing and Heat Insulation of Buildings (54)
- Structural & Aluminium Glazing (7)
- Repairs and Maintenance of Buildings (146)
- Strengthening and Retrofitting of Buildings (34)
- Innovating Technologies, New Materials and Solar Panels (123)
- Rain Water Harvesting & Tube wells (45)
- Road Furniture (82)
- Miscellaneous (Roads) (35)
Pricing finishing works against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works