Haryana SOR 2021
Flooring and Dados rates
181 flooring and dados items from the Haryana PWD (Buildings & Roads), effective 2021-03-31.
Flooring and Dados rates in the Haryana Haryana Schedule of Rates 2021 run from ₹4.00 to ₹5,548.00. Transcribed from Haryana PWD (B&R) — Haryana Schedule of Rates 2021, issued with the approval of the Direction Committee of Chief Engineers, 31 March 2021. Reference only — verify against the official source before pricing a bid.
/
181 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 10.1 | Providing and laying of base course of floors consisting of 100 mm thick cement 1:8:1 6 and 100 mm sand or stone filling | Sqm | 291.00 |
| 10.1.1 | Re-compacting excavated soil in plinth under floors, including watering, ramming, consolidating and dressing complete | Cum | 82.00 |
| 10.2 | Supplying and filling in plinth with sand (conforming to zone-IV, IS 1542) under floors, including watering, ramming, consolidating and dressing complete | Cum | 925.00 |
| 10.3 | Supplying and providing of Tangri River Sand under floors Including watering and compaction in 25cm layers, dressing etc. complete In all respects (As per item 10.2) | Cum | 553.00 |
| 10.4 | Providing and laying of screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping | Sqm | 98.00 |
| 10.5 | Providing and laying of screed of 40 mm thick cement concrete 1:8:16 to be laid below the topping | Sqm | 77.00 |
| 10.6 | Providing and laying of screed of 40 mm thick cement concrete 1: 4:8 to be laid below the topping | Sqm | 103.00 |
| 10.7 | Providing and laying of conglomerate floor 50mm thick cement concrete topping 1:2:4 | Sqm | 242.00 |
| 10.8 | Providing and laying of conglomerate floor 40mm thick cement concrete topping 1:2:4 | Sqm | 203.00 |
| 10.9 | Providing and laying of Conglomerate floor 25 mm thick cement concrete 1:2:4 on 100 mm cement concrete 1:8:16 and 100 mm sand or stone filling | Sqm | 383.00 |
| 10.10.1 | Providing and laying Cement concrete flooring 1: 2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete40 mm thick with 20 mm nominal size stone aggregate | Sqm | 300.00 |
| 10.10.2 | Providing and laying Cement concrete flooring 1: 2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete25 mm thick with 12 mm nominal size stone aggregate | Sqm | 188.00 |
| 10.11 | Providing and laying of 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete | Sqm | 437.00 |
| 10.12 | Providing and laying of 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1: 2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1: 2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete | Sqm | 473.00 |
| 10.13.1 | Providing and laying cement plaster skirting up to 30 cm height, with cement mortar 1: 3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement18 mm thick | Sqm | 294.00 |
| 10.14 | Providing a floating coat of 1.50 mm thick neat cement laid in one operation to the topping | Sqm | 33.00 |
| 10.15 | Extra for using hardener at top surface (3.5Kg /sqm) of trimix M25 to finish surface complete in all respect | Sqm | 191.00 |
| 10.16 | Providing and laying cement concrete pavement with 1: 2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete | Cum | 4,162.00 |
| 10.17 | Providing and laying polythene sheet under CC M-25 in road and parking complete in all respect | Sqm | 25.00 |
| 10.18 | Extra for making chequers (2mm deep) of approved pattern on cement concrete floors, steps, landing, pavements etc. TERRAZO FLOORING | Sqm | 29.00 |
| 10.19.1 | Providing and laying of 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volume, including cement slurry etc. completeDark shade pigment with ordinary cement | Sqm | 535.00 |
| 10.19.2 | Providing and laying of 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volume, including cement slurry etc. completeLight shade pigment with white cement | Sqm | 564.00 |
| 10.19.3 | Providing and laying of 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volume, including cement slurry etc. completeMedium shade pigment with 50% white cement and 50% ordinary | Sqm | 546.00 |
| 10.19.4 | Providing and laying of 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volume, including cement slurry etc. completeWhite cement without any pigment | Sqm | 536.00 |
| 10.19.5 | Providing and laying of 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volume, including cement slurry etc. completeLight shade pigment with ordinary cement | Sqm | 531.00 |
| 10.19.6 | Providing and laying of 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volume, including cement slurry etc. completeOrdinary cement without any pigment | Sqm | 508.00 |
| 10.20.1 | Providing and laying of 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder: 7 marble chips) by volume, including cement slurry etc. completeDark shade pigment with Ordinary cement | Sqm | 571.00 |
| 10.20.2 | Providing and laying of 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder: 7 marble chips) by volume, including cement slurry etc. completeLight shade pigment with white cement | Sqm | 613.00 |
| 10.20.3 | Providing and laying of 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder: 7 marble chips) by volume, including cement slurry etc. completeMedium shade pigment with 50% white cement and 50% ordinary | Sqm | 587.00 |
| 10.20.4 | Providing and laying of 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder: 7 marble chips) by volume, including cement slurry etc. completeWhite cement without any pigment | Sqm | 577.00 |
| 10.20.5 | Providing and laying of 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder: 7 marble chips) by volume, including cement slurry etc. completeLight shade pigment with ordinary cement | Sqm | 567.00 |
| 10.20.6 | Providing and laying of 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder: 7 marble chips) by volume, including cement slurry etc. completeOrdinary cement without any pigment | Sqm | 528.00 |
| 10.21.1 | Providing and laying of 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 12 mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7 mm to 10 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix: 3 marble chips) by volume, including cement slurry etc. completeDark shade pigment with ordinary cement | Sqm | 598.00 |
| 10.21.2 | Providing and laying of 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 12 mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7 mm to 10 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix: 3 marble chips) by volume, including cement slurry etc. completeLight shade pigment with white cement | Sqm | 656.00 |
| 10.21.3 | Providing and laying of 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 12 mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7 mm to 10 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix: 3 marble chips) by volume, including cement slurry etc. completeMedium shade pigment with 50% white cement and 50% ordinary | Sqm | 621.00 |
| 10.21.4 | Providing and laying of 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 12 mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7 mm to 10 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix: 3 marble chips) by volume, including cement slurry etc. completeWhite cement without any pigment | Sqm | 616.00 |
| 10.21.5 | Providing and laying of 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 12 mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7 mm to 10 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix: 3 marble chips) by volume, including cement slurry etc. completeLight shade pigment with ordinary cement | Sqm | 591.00 |
| 10.21.6 | Providing and laying of 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 12 mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7 mm to 10 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement: 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix: 3 marble chips) by volume, including cement slurry etc. completeOrdinary cement without any pigment | Sqm | 550.00 |
| 10.22.1 | Providing and fixing glass strips in joints of terrazzo/ cement concrete floors40 mm wide and 4 mm thick | Metre | 49.00 |
| 10.23 | Extra for laying terrazzo flooring on staircase treads not exceeding 30 cm in width, including cost of forming, nosing etc | Sqm | 30.00 |
| 10.24.1 | Providing and laying of crazy marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement: 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 white, black or white and black marble chips of sizes from 1 mm to4 mm nominal size by volume), with under layer 25 mm thick cement concrete 1: 2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement sluny etc. complete18 mm thick crazy marble stone white, black or as specified | Sqm | 572.00 |
| 10.25.1.1 | Providing and laying of marble chips skirting up to 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volumeDark shade pigment with ordinary cement | Sqm | 533.00 |
| 10.25.1.2 | Providing and laying of marble chips skirting up to 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volumeLight shade pigment with white cement | Sqm | 563.00 |
| 10.25.1.3 | Providing and laying of marble chips skirting up to 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volumeMedium shade pigment with 50% white cement | Sqm | 545.00 |
| 10.25.1.4 | Providing and laying of marble chips skirting up to 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volumeWhite cement without any pigment | Sqm | 542.00 |
| 10.25.1.5 | Providing and laying of marble chips skirting up to 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volumeLight shade pigment with ordinary cement | Sqm | 530.00 |
| 10.25.1.6 | Providing and laying of marble chips skirting up to 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement: 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volumeOrdinary cement without any pigment TILE FLOORING | Sqm | 507.00 |
| 10.26.1 | Providing and laying of precast terrazzo tiles 20 to 22 mm thick with graded marble chips of size up to 12 mm, laid in floors, and landings, jointed with neat cement sluny mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1: 4 (1 cement4: coarse sand)Light shade pigment using white cement | Sqm | 893.00 |
| 10.26.2 | Providing and laying of precast terrazzo tiles 20 to 22 mm thick with graded marble chips of size up to 12 mm, laid in floors, and landings, jointed with neat cement sluny mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1: 4 (1 cement4: coarse sand)Medium shade pigment using 50% white cement and 50% ordinary cement | Sqm | 845.00 |
| 10.26.3 | Providing and laying of precast terrazzo tiles 20 to 22 mm thick with graded marble chips of size up to 12 mm, laid in floors, and landings, jointed with neat cement sluny mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1: 4 (1 cement4: coarse sand)Dark shade pigment using ordinary cement | Sqm | 804.00 |
| 10.26.4 | Providing and laying of precast terrazzo tiles 20 to 22 mm thick with graded marble chips of size up to 12 mm, laid in floors, and landings, jointed with neat cement sluny mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1: 4 (1 cement4: coarse sand)Ordinary cement without any pigment | Sqm | 750.00 |
| 10.27 | Extra if terrazzo tiles are laid in treads of steps not exceeding3 0 cm in width | Sqm | 49.00 |
| 10.28.1 | Providing and laying of precast terrazzo tiles 20 to2 2 mm thick with graded marble chips of sizes up to 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement: 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles ofLight shade pigment using white cement | Sqm | 901.00 |
| 10.28.2 | Providing and laying of precast terrazzo tiles 20 to2 2 mm thick with graded marble chips of sizes up to 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement: 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles ofMedium shades pigment using 50% white cement and 50% ordinary cement | Sqm | 843.00 |
| 10.28.3 | Providing and laying of precast terrazzo tiles 20 to2 2 mm thick with graded marble chips of sizes up to 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement: 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles ofDark shade pigment using ordinary cement | Sqm | 796.00 |
| 10.28.4 | Providing and laying of precast terrazzo tiles 20 to2 2 mm thick with graded marble chips of sizes up to 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement: 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles ofOrdinary cement without any pigment | Sqm | 728.00 |
| 10.29.1 | Providing and laying of chequered terrazzo tiles 20 to 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement sluny mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1 4: (1 cement:4 coarse sand)Light shade pigment using white cement | Sqm | 879.00 |
| 10.29.2 | Providing and laying of chequered terrazzo tiles 20 to 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement sluny mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1 4: (1 cement:4 coarse sand)Medium shade pigment using 50% white cement, 50% ordinary cement | Sqm | 888.00 |
| 10.29.3 | Providing and laying of chequered terrazzo tiles 20 to 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement sluny mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1 4: (1 cement:4 coarse sand)Dark shade pigment using ordinary cement | Sqm | 818.00 |
| 10.29.4 | Providing and laying of chequered terrazzo tiles 20 to 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement sluny mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1 4: (1 cement:4 coarse sand)Ordinary cement without any pigment | Sqm | 737.00 |
| 10.30.1 | Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)Light shade pigment using white cement | Sqm | 958.00 |
| 10.30.2 | Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)Medium shade pigment using 50% white cement 50% Grey cement | Sqm | 844.00 |
| 10.30.3 | Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)Dark shade pigment using ordinary cement | Sqm | 673.00 |
| 10.30.4 | Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)Ordinary cement without any pigment | Sqm | 592.00 |
| 10.31.1.1 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS: 4457, complete as per the direction of Engineer-in- Charge — In flooring on a bed of 1 O mm thick mortar 1: 4 ( 1 acid proof cement: 4 coarse sand)Acid and alkali resistant tile | Sqm | 1,133.00 |
| 10.31.2.1 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS: 4457, complete as per the direction of Engineer-in- Charge — In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 coarse sand)Acid and alkali resistant tile | Sqm | 1,196.00 |
| 10.32.1.1 | Providing and laying of tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1: 3 (1 cement:3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete — Marble tiles (polished) Raj Nagar8 mm thick BRICK FLOORING | Sqm | 887.00 |
| 10.33.1 | Providing and laying of brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks1: 4 ( 1 cement: 4 coarse sand) | Sqm | 646.00 |
| 10.33.2 | Providing and laying of brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks1: 6 ( 1c ement: 6 coarse sand) | Sqm | 615.00 |
| 10.34 | Providing and laying dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks | Sqm | 531.00 |
| 10.35.1 | FLAT BRICK OR TILE FLOORINGProviding and laying of flat brick or tile flooring with bricks of class designation 7.5 laid in cement sand mortar 1:4 on 100 mm thick cement concrete 1:8:16 and 100 mm sand filling and cement pointing 1:2 on top | Sqm | 614.00 |
| 10.35.2 | FLAT BRICK OR TILE FLOORINGProviding and laying of flat brick or tile flooring with bricks of class designation 7.5 laid dry over a bed of 6 mm thick cement sand mortar 1:6 grouted with cement sand mortar 1:4 and top surface to be left clean after wire brushing | Sqm | 374.00 |
| 10.36 | Brick on end in soil/edging in required pattern with bricks of class designation KOTA STONE FLOORING | Rmt | 61.00 |
| 10.37.1 | Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 ( 1 cement: 4 coarse sand)25 mm thick | Sqm | 885.00 |
| 10.38 | Providing and fixing of Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. SAND STONE FLOORING | Sqm | 936.00 |
| 10.39.1 | Providing and fixing of 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand) with joints finished flushRed sand stone | Sqm | 602.00 |
| 10.40.1 | Providing and fixing of 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand), including pointing with cement mortar 1:2 (1 cement: 2 stone dust) with an admixture of pigment to match the shade of stoneRed sand stone | Sqm | 597.00 |
| 10.41.1 | Providing and fixing of 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement: 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortarRed sand stone | Sqm | 637.00 |
| 10.42 | Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab | Metre | 69.00 |
| 10.43 | Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre. MARBLE STONE FLOORING | Sqm | 16.00 |
| 10.44.1 | Providing and fixing of marble stone flooring with 16 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete withMakrana white second quality | Sqm | 2,546.00 |
| 10.44.2 | Providing and fixing of marble stone flooring with 16 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete withRaj Nagar plain | Sqm | 1,306.00 |
| 10.44.3 | Providing and fixing of marble stone flooring with 16 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete withAgaria White | Sqm | 2,053.00 |
| 10.44.4 | Providing and fixing of marble stone flooring with 16 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete withBlack Zebra | Sqm | 1,754.00 |
| 10.44.5 | Providing and fixing of marble stone flooring with 16 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete withUdaipur green marble | Sqm | 1,336.00 |
| 10.44.6 | Providing and fixing of marble stone flooring with 16 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete withPink plain marble | Sqm | 1,373.00 |
| 10.45 | Extra for pre finished nosing to treads of steps of marble stone | Metre | 261.00 |
| 10.46 | Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre | Sqm | 325.00 |
| 10.47 | Providing and laying Baroda Green marble stone 17mm and above thick in risers of step, skirting, dado, pillars and wall lining included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of marble including rubbing and polishing. The rates are for all heights / storey. The sample shall be got approved from Engineer In Charge | Sqm | 1,359.00 |
| 10.48 | Providing and laying Baroda Green marble stone 17mm and above thick flooring included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1:3 and jointed with white slurry mixed with pigment to match the shade of marble including rubbing and polishing. The rates are for all heights / storey. The sample shall be got approved from Engineer In Charge. GRANITE FLOORING | Sqm | 1,329.00 |
| 10.49.1 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in- ChargeFlamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent | Sqm | 1,970.00 |
| 10.50.1 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-ChargePolished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent | Sqm | 3,031.00 |
| 10.51 | Providing and fixing granite stone in all shades 15mm to 18 mm thick in skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc. ITALIAN MARBLE STONE FLOORING | Sqm | 2,838.00 |
| 10.52.1 | Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge18 mm thick Italian Marble stone slab, Per1ato, Rosso verona, Fire Red or Dark Emperadore etc | Sqm | 2,838.00 |
| 10.53.1 | Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge18 mm thick Italian Marble stone slab, Per1ato, Rosso verona, Fire Red or Dark Emperadore etc. WOODEN FLOORING | Sqm | 5,548.00 |
| 10.54.1 | Providing and fixing 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete withSecond class teak wood | Sqm | 3,833.00 |
| 10.54.2 | Providing and fixing 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete withSecond class deodar wood | Sqm | 2,519.00 |
| 10.56 | Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided), including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete. CERAMIC GLAZED TILES | KG | 103.00 |
| 10.57 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete | Sqm | 599.00 |
| 10.58 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete | Sqm | 603.00 |
| 10.59 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1: 4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete | Sqm | 667.00 |
| 10.60 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete | Sqm | 767.00 |
| 10.61 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete | Sqm | 847.00 |
| 10.62 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. VITRIFIED FLOOR TILES | Sqm | 638.00 |
| 10.63.1 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1: 4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completeSize of Tile 500x500 mm | Sqm | 958.00 |
| 10.63.2 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1: 4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completeSize of Tile 600x600 mm | Sqm | 1,105.00 |
| 10.63.3 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1: 4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completeSize of Tile 800x800 mm | Sqm | 1,304.00 |
| 10.63.4 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1: 4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completeSize of Tile 1000x1000 mm | Sqm | 1,503.00 |
| 10.64 | Deduct for not using 20 mm thick cement mortar 1: 4 (1 cement: 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm | Sqm | 331.00 |
| 10.65 | Providing and fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness | Sqm | 282.00 |
| 10.66 | Providing and laying of crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1: 4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length up to 6 mm, mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineer-in-charge | Sqm | 389.00 |
| 10.67.1 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. completeSize of Tile 500x500 mm | Sqm | 977.00 |
| 10.67.2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. completeSize of Tile 600x600 mm | Sqm | 1,124.00 |
| 10.67.3 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. completeSize of Tile 800x800 mm | Sqm | 1,323.00 |
| 10.67.4 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. completeSize of Tile 1000x1000 mm | Sqm | 1,523.00 |
| 10.68 | Providing and fixing glazed screen printed border tile 75mm wide having thickness 5mm, of approved quality & make, in all shades, design and prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm including pointing | Metre | 133.00 |
| 10.69.1 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick -·Size of Tile 500x500 mm | Sqm | 1,064.00 |
| 10.69.2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick -·Size of Tile 600x600 mm | Sqm | 1,211.00 |
| 10.69.3 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick -·Size of Tile BOOxBOO mm | Sqm | 1,410.00 |
| 10.69.4 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick -·Size of Tile 1000x1000 mm | Sqm | 1,610.00 |
| 10.70.1 | Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-chargeSize of Tile 500x500 mm | Sqm | 188.00 |
| 10.70.2 | Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-chargeSize of Tile 600x600 mm | Sqm | 157.00 |
| 10.70.3 | Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-chargeSize of Tile BOOxBOO mm | Sqm | 126.00 |
| 10.70.4 | Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-chargeSize of Tile 1000x1000 mm | Sqm | 90.00 |
| 10.71.1 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.06% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)Size of Tile 500x500 mm | Sqm | 1,011.00 |
| 10.71.2 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.06% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)Size of Tile 600x600 mm | Sqm | 1,157.00 |
| 10.71.3 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.06% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)Size of Tile BOOxBOO mm | Sqm | 1,357.00 |
| 10.71.4 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.06% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)Size of Tile 1000x1000 mm | Sqm | 1,557.00 |
| 10.72 | Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles | Sqm | 4.00 |
| 10.73 | Providing and fixing ceramic & Glazed tiles/ vitrified tiles/ of any size of approved make in floors / dados, laid in any pattern as specified over base of 3 mm thick adhesive of reputed brands as per IS specification 15477-2004 using 5 Kg. adhesive per sqm area of tiles and jointed with white cement slurry mixed with pigment to match the shade of tiles excluding cost of tiles | Sqm | 1,396.00 |
| 10.74 | Using ready mixed polymer modified based on grey cement/ white cement tile adhesive 3mm to 4mm thick for Ceramic and Vitrified tiles for wall and floors Technical Specifications: i) Mix Density - 1. 7 to 1.8 kgnitre ii) Tensile Adhesion a) Dry conditions (24hrs) - Minimum 750N b) Wet Conditions (7daysdry+7 days in water)- Min. 450N iii) Shear Adhesion a) Dry adhesion (24hrs) - Minimum 8 KN b) Wet adhesion (24hrs) - Minimum 4KN CC INTERLOCKING PAVER BLOCKS | Sqm | 120.00 |
| 10.75 | Providing and laying 50mm thick factory made cement concrete inter1ocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge | Sqm | 569.00 |
| 10.76 | Providing and laying 60mm thick factory made cement concrete inter1ocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge | Sqm | 623.00 |
| 10.77 | Providing and laying 80mm thick factory made cement concrete inter1ocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge | Sqm | 713.00 |
| 10.78 | Providing and laying 100mm thick factory made cement concrete inter1ocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. PVC/LINOLEUM FLOORING | Sqm | 743.00 |
| 10.79 | Providing and laying plain coloured 3.20 mm thick linoleum covering to floors laid dry | Sqm | 640.00 |
| 10.80 | Extra on item No.10.79, if linoleum of exact size is used | Sqm | 702.00 |
| 10.81.1 | Providing and fixing of P.V.C.(vinyl) asbestos tiles as per I.S.3461-1961 coloured and marbled or mottled finish flooring on a smooth and damp proof base using adhesive as recommended by manufacturer including rolling with light wooden roller weighing about 5 kg complete in all respect as desired by Engineer-in-Charge2 mm thick | Sqm | 676.00 |
| 10.81.2 | Providing and fixing of P.V.C.(vinyl) asbestos tiles as per I.S.3461-1961 coloured and marbled or mottled finish flooring on a smooth and damp proof base using adhesive as recommended by manufacturer including rolling with light wooden roller weighing about 5 kg complete in all respect as desired by Engineer-in-Charge3 mm thick | Sqm | 744.00 |
| 10.82.1 | Providing and fixing of P.V.C. sheet flexible type conforming to I.S.3462-1966 flooring plain coloured marble or mottled finish on a smooth damp proof base laid with adhesive recommended by manufacturer including pressing the sheet with a suitable tool to get a smooth surface all complete as directed by the Engineer-in-Charge1.50 mm thick | Sqm | 466.00 |
| 10.82.2 | Providing and fixing of P.V.C. sheet flexible type conforming to I.S.3462-1966 flooring plain coloured marble or mottled finish on a smooth damp proof base laid with adhesive recommended by manufacturer including pressing the sheet with a suitable tool to get a smooth surface all complete as directed by the Engineer-in-Charge2.00 mm thick | Sqm | 520.00 |
| 10.82.3 | Providing and fixing of P.V.C. sheet flexible type conforming to I.S.3462-1966 flooring plain coloured marble or mottled finish on a smooth damp proof base laid with adhesive recommended by manufacturer including pressing the sheet with a suitable tool to get a smooth surface all complete as directed by the Engineer-in-Charge2.50 mm thick | Sqm | 568.00 |
| 10.82.4 | Providing and fixing of P.V.C. sheet flexible type conforming to I.S.3462-1966 flooring plain coloured marble or mottled finish on a smooth damp proof base laid with adhesive recommended by manufacturer including pressing the sheet with a suitable tool to get a smooth surface all complete as directed by the Engineer-in-Charge3.00 mm thick | Sqm | 602.00 |
| 10.82.5 | Providing and fixing of P.V.C. sheet flexible type conforming to I.S.3462-1966 flooring plain coloured marble or mottled finish on a smooth damp proof base laid with adhesive recommended by manufacturer including pressing the sheet with a suitable tool to get a smooth surface all complete as directed by the Engineer-in-Charge4.00 mm thick | Sqm | 636.00 |
| 10.82.6 | Providing and fixing of P.V.C. sheet flexible type conforming to I.S.3462-1966 flooring plain coloured marble or mottled finish on a smooth damp proof base laid with adhesive recommended by manufacturer including pressing the sheet with a suitable tool to get a smooth surface all complete as directed by the Engineer-in-Charge5.00 mm thick GLASS/ ALUMINIUM/ PVC STRIPS IN FLOORING | Sqm | 670.00 |
| 10.83.1 | Providing and fixing aluminium strips 2 mm thick completew ith nails in floors40 mmwide | Metre | 84.00 |
| 10.83.2 | Providing and fixing aluminium strips 2 mm thick completew ith nails in floors32mmWide | Metre | 71.00 |
| 10.83.3 | Providing and fixing aluminium strips 2 mm thick completew ith nails in floors25mmwide | Metre | 58.00 |
| 10.84.1 | Providing and fixing glass strips, 3 mm thick in terrazzo/ cement concrete floors40 mmwide | Metre | 33.00 |
| 10.84.2 | Providing and fixing glass strips, 3 mm thick in terrazzo/ cement concrete floors32mmwide | Metre | 29.00 |
| 10.84.3 | Providing and fixing glass strips, 3 mm thick in terrazzo/ cement concrete floors25mmwide | Metre | 26.00 |
| 10.85.1 | Providing and fi xing glass strips,4 mm thick in terrazzo/ cement concrete floors40 mmwide | Metre | 40.00 |
| 10.85.2 | Providing and fi xing glass strips,4 mm thick in terrazzo/ cement concrete floors32mmwide | Metre | 35.00 |
| 10.85.3 | Providing and fi xing glass strips,4 mm thick in terrazzo/ cement concrete floors25mmwide | Metre | 30.00 |
| 10.86 | Providing and fixing glass strips, 5.5 mm thick 40mm wide in floors | Metre | 53.00 |
| 10.87.1 | Providing and fixing P.V.C. strips, 40mm wide in floors4m m thick | Metre | 85.00 |
| 10.87.2 | Providing and fixing P.V.C. strips, 40mm wide in floors5.5m m thick OTHER MISCELLANEOUS ITEMS USED FOR FLOORING | Metre | 99.00 |
| 10.88 | Providing of stamping or making grooves for a depth of 2 mm on top of steps in stair case | Sqm | 36.00 |
| 10.89 | Providing and fixing flat iron strips 40 mm x 3 mm thick in flooring (in stepping of floors) including cutting, straightening and fixing with nails etc. complete fixed in position | Metre | 76.00 |
| 10.90 | Providing and fixing of gun metal cramps 15m m x 6 mm, 16.5 cm long as per design including cost of mortar | Each | 57.00 |
| 10.91 | Providing and fixing of copper pins 7.5 cm long of 6mm diameter including cost of mortar | Each | 16.00 |
| 10.92 | Providing and fixing of stone dowel 10mm x 5x 2.50 cm cut to double wedge shape as per design including cost of mortar | Each | 10.00 |
| 10.93 | Providing and Laying of P.O.P on floors with polythene sheet, cleaning, wiping floor and mixing of POP with water on the polythene sheet and removing it after completion and disposing off the same complete in all respects as per direction of Engineer-in-Charge | Sqm | 8.00 |
| 10.94 | Providing and filling on joint 6 mm x 8 mm with Epoxy in Kota Stone flooring / Walls with 2.61 Kg/ 9.29 sqm. complete in all respects as per direction of Engineer-in-Charge | Sqm | 341.00 |
| 10.95 | Providing and laying 50 0x 50 0x 40 mm thick Turf paver (Turf pave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge | Sqm | 1,018.00 |
| 10.96 | Providing and fixing Glass mosaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surfacew ith the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in- Charge | Sqm | 2,968.00 |
| 10.97.1 | Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment up to 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: (a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment up to 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in charge. (c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0. 7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip non-combustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology up to 1m m thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in charge. All specification must be printed on the side of the panel to ensure the quality of the product300 mm Finished Floor Height (FFH) | Sqm | 4,672.00 |
| 10.97.2 | Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment up to 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: (a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment up to 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in charge. (c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0. 7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip non-combustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology up to 1m m thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in charge. All specification must be printed on the side of the panel to ensure the quality of the product450 mm Finished Floor Height (FFH) | Sqm | 4,952.00 |
| 10.98 | Providing and fixing Grass paver block of required strength and thickness on 25 mm thick compacted bed of sand and filling the joint with sand complete in all respect | Sqm | 1,342.00 |
| 10.99 | Providing and fixing covel stone/garden stone of size 150 mm x 150 mm laid in 20 mm thick cement mortar 1: 3 including grouting the joint with white cement and matching pigment complete in all respect (Covel/Garden stone to be as per manufacturer's specifications to be got approved from Engineer-in charge) | Sqm | 2,138.00 |
| 10.100.1 | Cement Concrete 1:8:16 FlooringCement Concrete 1:8:16 with Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size in foundation and plinth | Cum | 1,934.00 |
| 10.100.2 | Cement Concrete 1:8:16 FlooringCement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth | Cum | 2,086.00 |
| 10.101 | Providing & laying Epoxy Flooring 2mm thick ( overall thickness) with self levelling with Hi-build epoxy primer 100 micron thickness, self leveling epoxy screed 900 micron thickness, FQ sand and self levelling epoxy top coat having thickness 1000 micrones with all materials as mentioned I required to provide desired finish to the entire satisfaction of the Engineer in charge, | Sqm | 665.00 |
| 10.102 | Providing & laying Epoxy Flooring 1.5 mm thick ( overall thickness) with self levelling with Hi- build epoxy primer 100 micron thickness, self leveling epoxy screed 500 micron thickness, FQ sand and self levelling epoxy top coat having thickness 900 microns with all materials as mentioned / required to provide desired finish to the entire satisfaction of Engineer in charge, | Sqm | 637.00 |
| 10.103 | Providing & laying Epoxy Flooring 1.1 mm thick ( overall thickness) with self levelling with Hi- build epoxy primer 100 micron thickness and self levelling epoxy top coat having thickness 1000 microns with all materials as mentioned /required to provide desired finish to the entire satisfaction of Engineer in charge, | Sqm | 456.00 |
| 10.104 | Mirror polishing on marble work/Granite work/stone work whereever reqired to give high gloss finish complete | Sqm | 288.00 |
| 10.105 | Providing and laying matt finished vitrified tile of size 100x100x16mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer- in-Charge | Sqm | 1,797.00 |
| 10.106 | Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge | Sqm | 1,082.00 |
| 10.107 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge | Sqm | 1,797.00 |
| 10.108 | Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement: 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in- charge | Sqm | 1,473.00 |
| 10.109 | Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Enaineer-in-CharQe. Note:- Rates for external plaster are for height up to 10m from ground &IMIM CEMENT PLASTER | Sqm | 4,117.00 |
Other chapters in this schedule
- Earth Work and Rock Cutting (71)
- Dismantling and Demolition (93)
- Concrete and RCC Work (148)
- Brick Work and Stone Masonry (101)
- Cladding Work (61)
- Hoisting and Roofing (126)
- Finishing Works (129)
- Wood Work, PVC and Aluminum Doors and Windows (291)
- Steel and Iron Work (64)
- Lining and Outlets (71)
- Deep Foundations (141)
- River and Canal Protection Works (57)
- Road Works (112)
- Miscellaneous (Buildings) (114)
- Water Supply (879)
- Sewerage and Drainage (1019)
- Sanitary Installations (642)
- Horticulture and Land Scaping (125)
- Bridges (Substructure, Superstructure, Bearings & Expansion Joints) (32)
- Water Proofing and Heat Insulation of Buildings (54)
- Structural & Aluminium Glazing (7)
- Repairs and Maintenance of Buildings (146)
- Strengthening and Retrofitting of Buildings (34)
- Innovating Technologies, New Materials and Solar Panels (123)
- Rain Water Harvesting & Tube wells (45)
- Road Furniture (82)
- Miscellaneous (Roads) (35)
Pricing flooring and dados against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works