Haryana SOR 2021
Repairs and Maintenance of Buildings rates
146 repairs and maintenance of buildings items from the Haryana PWD (Buildings & Roads), effective 2021-03-31.
Repairs and Maintenance of Buildings rates in the Haryana Haryana Schedule of Rates 2021 run from ₹1.00 to ₹87,730.00. Transcribed from Haryana PWD (B&R) — Haryana Schedule of Rates 2021, issued with the approval of the Direction Committee of Chief Engineers, 31 March 2021. Reference only — verify against the official source before pricing a bid.
/
146 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 30.2 | Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by mechanical / manual means, including preparing and cleaning the surface for re-pointing/ refilling of joints, including disposal of rubbish to the dumping ground with all lead and lift | Sqm | 16.00 |
| 30.3 | Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/structure, all as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding) | Sqm | 71.00 |
| 30.4 | Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer, on cleaned sand stone surface at desired locations as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding) | Sqm | 31.00 |
| 30.5 | Ruled / Flush pointing on existing Red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime: 1.5 surkhi (50% red and 50% light yellow surkhi ): 1/2 marble dust}. (The rate is inclusive of all materials & labours involved except scaffolding) | Sqm | 112.00 |
| 30.6 | Applying two or more coat of Ethyl Silicate chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with brush or spray on the existing stone masonry surface till there is no further absorption of chemical by stone surface, including protecting the applied surface from direct sunlight by suitable means during application, all complete as per direction of the Engineer-in-Charge (The rate is inclusive of all materials & labours involved except scaffolding) | Sqm | 256.00 |
| 30.7 | Applying breathable, non-reactive, antifungal, and water repellent Saline/Siloxane chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1: 12 (One part of approved chemical: 12 Part of Turpentine oil), on the existing sand stone masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer-In-charge (The rate is inclusive of all materials & labours involved except scaffolding). ROOFING AND CEILING WORKS | Sqm | 70.00 |
| 30.8 | Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete | Each | 199.00 |
| 30.9 | Regarding terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1: 3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge | Sqm | 245.00 |
| 30.10.1 | Replacing sand stone slabs in roofing, laid in cement mortar 1:4 (1 cement: 4 coarse sand), including necessary repairs and cement pointing with same mortar complete, including disposal of rubbish to dumping ground, all complete as per direction of Engineer-in-ChargeRed sand stone slabs 30 to 50 mm thick | Sqm | 476.00 |
| 30.11.1 | Renewing/replacing of wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of Engineer-in-ChargeSal wood battens | Cum | 83,415.00 |
| 30.12.1.1 | Renewing/replacing of wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge — Not exceeding 4.00 metres in lengthSal wood beams | Cum | 86,797.00 |
| 30.12.1.2 | Renewing/replacing of wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge — Not exceeding 4.00 metres in lengthHallock wood beams | Cum | 53,348.00 |
| 30.12.2.1 | Renewing/replacing of wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of Engineer-in-ChargeSal wood beams | Cum | 87,730.00 |
| 30.12.2.2 | Renewing/replacing of wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of Engineer-in-ChargeHallock wood beams | Cum | 54,247.00 |
| 30.13.1 | Replacing joists (karries) including hoisting, fixing in position and applying wood preservative on unexposed surface etc. complete withSal wood | Cum | 83,340.00 |
| 30.13.2 | Replacing joists (karries) including hoisting, fixing in position and applying wood preservative on unexposed surface etc. complete withHollockwood | Cum | 50,230.00 |
| 30.14 | Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking | KG | 2.00 |
| 30.15 | Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand & manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. FINISHING WORKS | Metre | 74.00 |
| 30.17 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge | Sqm | 355.00 |
| 30.18 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge | Sqm | 1.00 |
| 30.19 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge | Sqm | 16.00 |
| 30.22 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Sqm | 11.00 |
| 30.23.1 | White washing with lime to give an even shadeOld work (two or more coats) | Sqm | 9.00 |
| 30.23.2 | White washing with lime to give an even shadeOld work (one or more coats) | Sqm | 6.00 |
| 30.24 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade | Sqm | 29.00 |
| 30.25.1 | Distempering with 1st quality acrylic distemper (Ready mix) having voe content less than 50 grams/ litre of approved brand and manufacture to give an even shadeOld work (one or more coats) | Sqm | 32.00 |
| 30.26.1 | Painting with oil type wood preservative of approved brand and manufactureOld work (one or more coats) | Sqm | 22.00 |
| 30.27.1 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shadeOne or more coats on old work | Sqm | 47.00 |
| 30.28.1 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeOne or more coats on old work | Sqm | 43.00 |
| 30.29.1 | Painting with aluminium paint of approved brand and manufacture to give an even shadeOne or more coats on old work | Sqm | 37.00 |
| 30.30.1 | Painting with acid proof paint of approved brand and manufacture of required colour to give an even shadeOne or more coats on old work | Sqm | 48.00 |
| 30.31.1 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shadeOne or more coats on old work | Sqm | 35.00 |
| 30.32.1 | French spirit polishingOne or more coats on old work | Sqm | 99.00 |
| 30.33.1 | Polishing on wood work with ready made wax polish of approved brand and manufactureOld work | Sqm | 37.00 |
| 30.34.1 | Distempering with 1st quality acrylic distemper (ready made) having voe content less than 50 gm per litre. of approved manufacturer and of required shade and colour complete. as per manufacturer 's specificationOne or more coats on old work | Sqm | 24.00 |
| 30.35.1 | Finishing walls with water proofing cement paint of required shadeOld work (one or more coats applied @ 2.20 kg/1 O sqm) over priming coat of primer applied @ 0.80 litres/10 sqm complete including cost of Priming coat | Sqm | 55.00 |
| 30.35.2 | Finishing walls with water proofing cement paint of required shadeOld work (one or more coats @ 2.20 kg/10 sqm) complete | Sqm | 37.00 |
| 30.36.1 | Finishing walls with textured exterior paint of required shadeOld work (Two or more coats on existing cement paint surface applied @ 3.28 litre/1 O sqm | Sqm | 137.00 |
| 30.36.2 | Finishing walls with textured exterior paint of required shadeOld work (One or more coats) applied @ 1.82 litre/1 O sqm | Sqm | 82.00 |
| 30.37.1 | Finishing walls with Acrylic Smooth exterior paint of required shadeOld work (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface | Sqm | 71.00 |
| 30.37.2 | Finishing walls with Acrylic Smooth exterior paint of required shadeOld work (One or more coat applied @ 0.90 litre/10 sqm) | Sqm | 45.00 |
| 30.38.1 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shadeOld work (Two or more coats applied @ 1.43 litre/ 10 sqm) over existing cement paint surface | Sqm | 68.00 |
| 30.38.2 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shadeOld work (One or more coats applied @ 0.83 litre/ 1 O sqm) over existing cement paint surface | Sqm | 45.00 |
| 30.39 | Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work | Sqm | 38.00 |
| 30.40.1 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeOld work (one or more coats) | Sqm | 34.00 |
| 30.41.1 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work75 mm diameter pipes | Metre | 10.00 |
| 30.41.2 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work100 mm diameter pipes | Metre | 13.00 |
| 30.41.3 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work150 mm diameter pipes | Metre | 18.00 |
| 30.42.1 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work75 mm diameter pipes | Metre | 10.00 |
| 30.42.2 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work100 mm diameter pipes | Metre | 12.00 |
| 30.42.3 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work150 mm diameter pipes | Metre | 19.00 |
| 30.43.1 | Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc100 mm diameter pipe | Metre | 15.00 |
| 30.43.2 | Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc75 mm diameter pipe | Metre | 11.00 |
| 30.44.1 | Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality15 mm diameter pipe | Metre | 3.00 |
| 30.44.2 | Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality20 mm diameter pipe | Metre | 4.00 |
| 30.44.3 | Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality25 mm diameter pipe | Metre | 5.00 |
| 30.44.4 | Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality32 mm diameter pipe | Metre | 6.00 |
| 30.44.5 | Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality40 mm diameter pipe | Metre | 7.00 |
| 30.44.6 | Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality50 mm diameter pipe | Metre | 8.00 |
| 30.45 | Re-painting C.I. cistern with bitumastic or any other anti- corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete, including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary | Each | 253.00 |
| 30.46 | Repainting C. I. cistern with synthetic enamel paint of approved colour, brand and manufacture on the outside surface of cistern, flush pipe, other fittings etc. complete | Each | 117.00 |
| 30.47 | Repainting bath tub of size 1700x730x430 mm with enamel paint | Each | 380.00 |
| 30.49.1 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size), making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-ChargeDoor chowkhats | Each | 612.00 |
| 30.49.2 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size), making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-ChargeWindow chowkhats | Each | 397.00 |
| 30.49.3 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size), making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-ChargeClerestory window chowkhats | Each | 271.00 |
| 30.50 | Fixing Chowkhat in existing opening in brick/ RCC wall with dash fasteners/Chemical fasteners of appropriate size (3 Nos. on each vertical member of door Chowkhat and 2 Nos. on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener. 39.51 Taking out existing wooden door/window shutter, repair by cutting, painting etc. and refixing of repaired door/window shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge | Each | 147.00 |
| 30.52.1 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of malba/ debris/rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in ChargeFor door/ window/ clerestory window | Sqm | 369.00 |
| 30.53.1.1 | Replacing and fixing 25 mm thick shutters for cup board etc i/c disposal of dismantled shutters, if any — Panelled or panelled & glazed shuttersSuperior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws | Sqm | 3,562.00 |
| 30.53.1.2 | Replacing and fixing 25 mm thick shutters for cup board etc i/c disposal of dismantled shutters, if any — Panelled or panelled & glazed shutters1st class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws | Sqm | 2,976.00 |
| 30.53.2.1 | Replacing and fixing 25 mm thick shutters for cup board etc i/c disposal of dismantled shutters, if anySuperior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws | Sqm | 3,688.00 |
| 30.53.2.2 | Replacing and fixing 25 mm thick shutters for cup board etc i/c disposal of dismantled shutters, if any1st class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws | Sqm | 3,057.00 |
| 30.54.1 | Renewing glass panes, with putty and nails wherever necessary including racking out the old puttyFloat glass panes of nominal thickness 4m m (weight not less than 1O kg/sqm) | Sqm | 636.00 |
| 30.54.2 | Renewing glass panes, with putty and nails wherever necessary including racking out the old puttyFloat glass panes of nominal thickness 5m m (weight not less than 12.5kg/sqm) | Sqm | 922.00 |
| 30.55.1 | Renewing glass panes, with wooden fillets wherever necessaryFloat glass panes of nominal thickness 4 mm (weight not less than 1O kg/sqm) | Sqm | 810.00 |
| 30.55.2 | Renewing glass panes, with wooden fillets wherever necessaryFloat glass panes of nominal thickness 5m m (weight not less than 12.5kg/sqm) | Sqm | 1,096.00 |
| 30.56.1 | Renewing glass panes and refixing existing wooden filletsFloat glass panes of nominal thickness 4m m (weight not less than 1O kg/sqm) | Sqm | 663.00 |
| 30.56.2 | Renewing glass panes and refixing existing wooden filletsFloat glass panes of nominal thickness 5m m (weight not less than 12.5kg/sqm) | Sqm | 948.00 |
| 30.57.1 | Supplying and fixing new wooden fillets wherever necessary2nd class teak wood fillets | Metre | 32.00 |
| 30.57.2 | Supplying and fixing new wooden fillets wherever necessaryHollock wood fillets | Metre | 26.00 |
| 30.58 | Renewal of old putty of glass panes (length) | Metre | 19.00 |
| 30.59 | Refixing old glass panes with putty and nails | Sqm | 254.00 |
| 30.60 | Fixing old glass panes with wooden fillets (excluding cost of fillets) | Sqm | 222.00 |
| 30.61.1 | Replacing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete150m m | Each | 599.00 |
| 30.61.2 | Replacing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete125m m | Each | 417.00 |
| 30.61.3 | Replacing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete100 mm | Each | 367.00 |
| 30.62.1 | Replacing and fixing bright finished brass double acting spring hinges with necessary brass screws etc. complete150m m | Each | 671.00 |
| 30.62.2 | Replacing and fixing bright finished brass double acting spring hinges with necessary brass screws etc. complete125 mm | Each | 567.00 |
| 30.62.3 | Replacing and fixing bright finished brass double acting spring hinges with necessary brass screws etc. complete100m m | Each | 549.00 |
| 30.63.1 | Replacing and fixing bright finished brass flush bolts with necessary brass screws etc. complete250mm | Each | 213.00 |
| 30.63.2 | Replacing and fixing bright finished brass flush bolts with necessary brass screws etc. complete150m m | Each | 185.00 |
| 30.63.3 | Replacing and fixing bright finished brass flush bolts with necessary brass screws etc. complete100 mm | Each | 133.00 |
| 30.64 | Replacing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete | Each | 221.00 |
| 30.65.1 | Replacing and fixing bright finished brass hard drawn hooks and eyes300mm | Each | 81.00 |
| 30.65.2 | Replacing and fixing bright finished brass hard drawn hooks and eyes250mm | Each | 78.00 |
| 30.65.3 | Replacing and fixing bright finished brass hard drawn hooks and eyes200mm | Each | 69.00 |
| 30.65.4 | Replacing and fixing bright finished brass hard drawn hooks and eyes150m m | Each | 55.00 |
| 30.65.5 | Replacing and fixing bright finished brass hard drawn hooks and eyes100m m | Each | 48.00 |
| 30.66 | Replacing and fixing bright finished brass helical door spring (superior quality) | Each | 415.00 |
| 30.67.1 | Replacing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete125x70x4 mm (ordinary type) | Each | 153.00 |
| 30.67.2 | Replacing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete100x70x4 mm (ordinary type) | Each | 129.00 |
| 30.67.3 | Replacing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete75x65x4 mm (heavy type) | Each | 146.00 |
| 30.67.4 | Replacing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete75x40x2.5 mm (ordinary type) | Each | 83.00 |
| 30.67.5 | Replacing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete50x40x2.5 mm (ordinary type) | Each | 36.00 |
| 30.68 | Replacing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete | Each | 227.00 |
| 30.69.1 | Replacing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete20 mm diameter | Metre | 269.00 |
| 30.69.2 | Replacing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete25 mm diameter | Metre | 334.00 |
| 30.70 | Replacing and fixing bright finished brass fan light pivot with necessary brass screws etc. complete | Each | 35.00 |
| 30.71 | Replacing and fixing 300 mm long bright finished brass chain with hook for fan light including necessary brass screws etc. complete | Each | 57.00 |
| 30.72 | Replacing/repairing and fixing plain Jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x1 O mm laths placed 35 mm apart (frames to be paid separately), including fixing 50x12 mm beading complete with 30. 72.1 Second class teak wood STEEL AND IRON WORKS | Sqm | 3,363.00 |
| 30.73 | Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows | KG | 80.00 |
| 30.74 | Replacing and fixing bright finished brass casement window fasteners or peg stays to windows/ ventilators with necessary welding and machine screws etc. complete | KG | 349.00 |
| 30.75 | Replacing and fixing bright finished brass quadrant stay 300 mm long with necessary brass screws etc. complete | Each | 153.00 |
| 30.76 | Replacing and fixing 14 mm bright finished brass spring catch to steel centre hung ventilators with necessary welding and machine screws etc. complete | Each | 33.00 |
| 30.77 | Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer | KG | 132.00 |
| 30.78.1 | Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. completeWheel 50 mm dia and below | Each | 135.00 |
| 30.78.2 | Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. completeWheel above 50 mm dia WATER SUPPLY, SEWERAGE AND DRAINAGE WORKS | Each | 212.00 |
| 30.79 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge | Each | 95.00 |
| 30.80.1 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-ChargeIn temal Work- Exposed on wall | Metre | 1.00 |
| 30.81.1 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required15 mm nominal bore | Each | 299.00 |
| 30.81.2 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required20 mm nominal bore | Each | 334.00 |
| 30.81.3 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required25 mm nominal bore | Each | 396.00 |
| 30.81.4 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required32 mm nominal bore | Each | 448.00 |
| 30.81.5 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required40 mm nominal bore | Each | 520.00 |
| 30.81.6 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required50 mm nominal bore | Each | 665.00 |
| 30.81.7 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required65 mm nominal bore | Each | 1,041.00 |
| 30.81.8 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required80 mm nominal bore | Each | 1,106.00 |
| 30.82.1 | Making holes by cutting cores of appropriate dia in RCC floors and roofs of thickness up to 6" (six inches) for passing drain pipe and repairing the hole after insertion of drain pipe etc. including finishing-complete so as to make it leak proofDrain pipe of 150mm internal dia | Each | 1,117.00 |
| 30.82.2 | Making holes by cutting cores of appropriate dia in RCC floors and roofs of thickness up to 6" (six inches) for passing drain pipe and repairing the hole after insertion of drain pipe etc. including finishing-complete so as to make it leak proofDrain pipe of 100mm internal dia | Each | 766.00 |
| 30.83 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge | Each | 31.00 |
| 30.84.1 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old we seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in chargeLong pattern W.C Pan of size 580x440 mm | Each | 1,806.00 |
| 30.84.2 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old we seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in chargeOrissa pattern W.C Pan of size 580x440 mm | Each | 2,632.00 |
| 30.85.1 | Replacing and fixing C.P. brass chain and rubber plug complete for sink or wash basin32 mm dia | Each | 58.00 |
| 30.85.2 | Replacing and fixing C.P. brass chain and rubber plug complete for sink or wash basin40 mm dia | Each | 58.00 |
| 30.86 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge | Each | 48.00 |
| 30.87.1 | Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately)Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5 | Each | 1,584.00 |
| 30.87.2 | Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately)Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 | Each | 2,460.00 |
| 30.87.3 | Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately)Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 | Each | 2,280.00 |
| 30.87.4 | Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately)Circular manhole 140 cm dia with circular cover 600 mm dia of grade EHD - 35 | Each | 138.00 |
| 30.88.1 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. completeFor pipes 100 to 250 mm diameter | Each | 268.00 |
| 30.88.2 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. completeFor pipes 250 to 300 mm diameter | Each | 317.00 |
| 30.88.3 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. completeFor pipes 350 to 450 mm diameter | Each | 459.00 |
| 30.89 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge | Each | 119.00 |
| 30.91 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia up to 300mm | Metre | 103.00 |
| 30.92 | Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of silt and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. SCAFFOLDING FOR REPAIR WORKS | Sqm | 36.00 |
| 30.93 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube Challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after.The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge.The elevational area of the scaffolding shall be measured for payment purpose.The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially and where necessary deduction for scaffolding in the existing item is to be done | Sqm | 135.00 |
| 30.94 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, up to 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elavational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. (3) This item to be used for maintenance work judicially and where necessary deduction for scaffolding in the existing item is to be done | Sqm | 135.00 |
Other chapters in this schedule
- Earth Work and Rock Cutting (71)
- Dismantling and Demolition (93)
- Concrete and RCC Work (148)
- Brick Work and Stone Masonry (101)
- Cladding Work (61)
- Hoisting and Roofing (126)
- Flooring and Dados (181)
- Finishing Works (129)
- Wood Work, PVC and Aluminum Doors and Windows (291)
- Steel and Iron Work (64)
- Lining and Outlets (71)
- Deep Foundations (141)
- River and Canal Protection Works (57)
- Road Works (112)
- Miscellaneous (Buildings) (114)
- Water Supply (879)
- Sewerage and Drainage (1019)
- Sanitary Installations (642)
- Horticulture and Land Scaping (125)
- Bridges (Substructure, Superstructure, Bearings & Expansion Joints) (32)
- Water Proofing and Heat Insulation of Buildings (54)
- Structural & Aluminium Glazing (7)
- Strengthening and Retrofitting of Buildings (34)
- Innovating Technologies, New Materials and Solar Panels (123)
- Rain Water Harvesting & Tube wells (45)
- Road Furniture (82)
- Miscellaneous (Roads) (35)
Pricing repairs and maintenance of buildings against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works