Chhattisgarh SOR 2026
Wood and PVC Work rates
128 wood and pvc work items from the Chhattisgarh Public Works Department (PWD), effective 2026-06-10.
Wood and PVC Work rates in the Chhattisgarh Building Schedule of Rates 2026 run from ₹11.00 to ₹12,15,350.00. Transcribed from Chhattisgarh PWD — Modified Building SOR, 10 June 2026. Reference only — verify against the official source before pricing a bid.
/
128 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 8.1.2 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position.Sal, bijasal, benteak, khair, haldu | Cum | 51,893.00 |
| 8.2.2 | Providing wood work in frames of false ceiling, partition etc. sawn and put in position with main batten 125x50mm (nominal) and cross batten 50x38mm (nominal) both at spacing of 600mm center to center.Sal, bijasal, benteak, khair, haldu | Cum | 53,162.00 |
| 8.3 | Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm | Each | 62.00 |
| 8.4.1 | Providing and fixing Dash fastener (for fixing door/ window frames) on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Dash fastener 6x75mm | Each | 17.00 |
| 8.4.2 | Providing and fixing Dash fastener (for fixing door/ window frames) on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Dash fastener 10x75mm | Each | 23.00 |
| 8.4.3 | Providing and fixing Dash fastener (for fixing door/ window frames) on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Dash fastener 12x100mm | Each | 33.00 |
| 8.5.2 | Extra for additional labour for circular work such as frames of fan lights.Sal, bijasal, benteak, khair, haldu | Cum | 5,804.00 |
| 8.6.2 | Providing and fixing 40mm thick paneled or glazed or paneled and glazed shutter frames for doors excluding hinges and paneling. (Area of shutter to be measured without deducting paneling area)Bijasal, benteak, khair, haldu | Sqm | 1,503.00 |
| 8.7.2 | Providing and fixing 35mm thick paneled or glazed or paneled and glazed shutter frames for doors excluding hinges and paneling. (Area of shutter to be measured without deducting paneling area)Bijasal, benteak, khair, haldu | Sqm | 1,364.00 |
| 8.8 | Grade bolt M16 (16mm nominal dia in mm) x 250 mm long depth 200mm | Each | 1,354.00 |
| 8.8 | Grade bolt M20 (20mm nominal dia in mm) x 300 mm long depth 250mm | Each | 1,494.00 |
| 8.8.2 | Providing and fixing 30mm thick paneled or glazed or paneled and glazed shutter frames for doors excluding hinges and paneling. (Area of shutter to be measured without deducting paneling area)Bijasal, benteak, khair, haldu | Sqm | 1,187.00 |
| 8.9.2 | Providing and fixing 35mm thick glazed shutter frames for windows, clerestory windows, ventilators etc. using glass panes including M.S. butt hinges with necessary screws but excluding glass panes. (Area of shutter to be measured without deducting paneling area).Bijasal, benteak, khair, haldu wood | Sqm | 1,602.00 |
| 8.10.2 | Providing and fixing 30mm thick glazed shutter frames for windows, clerestory windows, ventilators etc. using glass panes including M.S. butt hinges with necessary screws but excluding glass panes. (Area of shutter to be measured without deducting paneling area).Bijasal, benteak, khair, haldu wood | Sqm | 1,425.00 |
| 8.15 | Extra for double leaf shutter instead of single leaf | Sqm | 44.00 |
| 8.19.1 | Extra for providing vision panel not exceeding 0.10 sqm in all type of flush shutters (excluding cost of glass)Rectangular or square | Each | 59.00 |
| 8.20.1 | Extra for providing louvers in flush doors upto 0.20 sqmDecorative type doors (50 x 5 mm) | Sqm | 162.00 |
| 8.21 | Extra for cutting rebate in flush door shutter (total area of door shutter to be measured) | Sqm | 39.00 |
| 8.22.1 | Providing and fixing paneling in paneled or paneled and glazed shutters for doors etc. (only area of paneling to be measured). Paneling for or paneled and glazed shutters 25 mm to 40 mm thick:Teak wood (16mm thick panel) | Sqm | 1,566.00 |
| 8.22.2 | Providing and fixing paneling in paneled or paneled and glazed shutters for doors etc. (only area of paneling to be measured). Paneling for or paneled and glazed shutters 25 mm to 40 mm thick:Bijsal, Haldu, Benteak, Khair (16mm thick panel) | Sqm | 992.00 |
| 8.23.2 | Providing and fixing 35mm thick wire gauge shutter having top and style rail 95mm width, bottom and lock rail 197mm width, using galvanized M.S. wire dia of 0.45 mm for doors, windows, clerestory windows excluding hinges.Bijasal, Haldu, Benteak, Khair | Sqm | 1,605.00 |
| 8.24.2 | Providing and fixing 30mm thick wire gauge shutter having top and style rail 95mm width, bottom and lock rail 197mm width, using galvanized M.S. wire dia of 0.45mm for doors, windows, clerestory windows excluding hinges.Bijasal, Haldu, Benteak, Khair | Sqm | 1,464.00 |
| 8.25 | Extra for providing fixing galvanized M.S. wire dia of 0.60 mm instead of wire dia 0.45mm to doors, windows and clerestory windows | Sqm | 15.00 |
| 8.26.2 | Providing and fixing 40mm thick louvered shutters fixed with venetians 12mm thick for window excluding hinges.Bijasal, Haldu, Benteak, Khair | Sqm | 2,061.00 |
| 8.27.2 | Providing and fixing louvers 50mm wide and 12 mm thick in grooves in clerestory window frames excluding cost of frame.Bijasal, Haldu, Benteak, Khair | Sqm | 968.00 |
| 8.28.2 | Providing and fixing plain jafri of 35x10mm laths placed 35mm apart (frame to be paid separately) including M.S. straps, fixing 50x12mm beading complete.Bijasal, Haldu, Benteak, Khair | Sqm | 965.00 |
| 8.29.2 | Providing and fixing plain jaffri door, windows shutters excluding, 35x10mm laths placed 35 mm apart including fixing 50x12 mm beading complete excluding hinges with.Bijasal, Haldu, Benteak, Khair | Sqm | 1,513.00 |
| 8.30 | Providing 50x50x50mm thick wood plugs including cutting brick work and fixing in Cm 1:3 (1 cement:3 sand) | Each | 17.00 |
| 8.32 | Providing and fixing in wall lining 12mm thick flat pressed three layer (medium density) particle board pre-laminated one side decorative lamination on other side balancing lamination exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete | Sqm | 827.00 |
| 8.34.2 | Providing and fixing 4mm thick ply wood plain lining with necessary screws and primary coat on exposed surface complete with ply facing.Commercial ply faces | Sqm | 510.00 |
| 8.35 | Providing and fixing wall paneling frame made of commercial grade 12mm thick water proof ply strips 100mm wide at 600mm apart center to center vertically and horizontally with necessary screws, wooden plugs etc complete as required | Sqm | 469.00 |
| 8.37 | Providing and fixing approved shade veneering on wood wall paneling complete as required | Sqm | 599.00 |
| 8.38 | Providing and fixing 25mm thick teak wood plain skirting with necessary screws and a priming coat with wood primer on unexposed surfaces | Sqm | 3,046.00 |
| 8.40 | Providing and fixing 200 mm wide teak wood moulding such as base moulding, chair rail, architrave, moulded posts moulding skirting including necessary screws and painting on unexposed surfaces with wood primer etc complete for per cm thick | Metre | 190.00 |
| 8.41 | Providing and fixing teak wood archivolt having 100 mm projectors including necessary screws and painting of unexposed surfaces with approved wood primer etc complete for per cm width | Metre | 117.00 |
| 8.45.3 | Providing and fixing heavy duty stainless steel pipe for curtain/ cloth hanging with two stainless steel brackets in wooden pelmet or wardrobe or any other space including screws and or plastic rawl plugs etc. wherever necessary.Elliptical pipe made from 25mm dia pipe | Metre | 195.00 |
| 8.46 | Providing and fixing decorative curtain rod assembly made of 32mm dia aluminium pipe covered with decorative finish plastic sleeve, 2 Nos or more 100x50x20mm size decorative wooden bracket, 2 Nos 100x50mm dia decorative wooden rod holding end plugs and 50mm dia wooden curtain rings 1 nos for every 100mm of length of curtain rod including PVC rawl plugs etc complete | Metre | 224.00 |
| 8.47 | Providing and fixing Indian teak plywood 4 mm thick in partition including fixing to frames with brass screws etc. complete with 50x12mm teak wood beadings (frames to be paid separately) | Sqm | 802.00 |
| 8.48 | Providing and fixing plain asbestos cement sheet 6 mm thick in partition including fixing to frames with necessary screws etc. complete with 50x12mm teak wood beadings (frames to be paid separately) | Sqm | 478.00 |
| 8.49 | Providing and fixing 4 mm thick Decorative plywood of approved quality in partition including fixing to frames with necessary screws etc. complete with 50 x 12 mm teak wood beadings (frames to be paid separately) | Sqm | 1,091.00 |
| 8.50.2 | Providing and fixing 25 mm thick wooden shelves supported on 40x40x6 mm T or L iron brackets fixed at suitable distance in 75x75x150mm blocks of M-15 grade cement concrete.Bijasal, Haldu, Benteak, Khair | Sqm | 2,036.00 |
| 8.51.2 | Providing and fixing 38 mm thick wooden shelves supported on 40x40x6 mm T or L in brackets fixed at suitable distance in 75x75x150mm blocks of cement concrete 1:2:4:Bijasal, Haldu, Benteak, Khair | Sqm | 2,512.00 |
| 8.52.2 | Providing, and fixing M.S. round and square bars with MS flat of required pattern in wooden frames for windows & clerestory windows including applying a priming coat of red oxide zinc chromate primer, welding etc completeOrnamental grill | KG | 65.00 |
| 8.53 | Providing and fixing expanded metal 20x60 mm stands 3.25 mm wide and 1.60mm thick to window including 62x19mm beading to teak wood including priming coat of red oxide zinc chromate primer | Sqm | 790.00 |
| 8.54 | Providing & fixing hard drawn steel wire fabric 75x25mm mesh of weight not less than 7.75 kg. per sqm to doors, window frames including 62x19mm teak wooden beading including priming coat of red oxide zinc chromate primer | Sqm | 909.00 |
| 8.55 | Providing and fixing and galvanized wire mesh of I.S. gauge designation 85 G. with wires 0.56 mm dia to windows and clerestory windows including 19x12mm teak wood beading including priming coat of red oxide zinc chromate primer | Sqm | 377.00 |
| 8.56 | Providing and fixing stainless steel wire mesh of average width of aperture 1.56mm with wire of dia 0.45mm to doors, windows and clerestory windows including 19x12mm teak wood beading etc. complete | Sqm | 552.00 |
| 8.57 | Providing sal wood beams, joints (karries) including hosting fixing in position and applying wood preservative on exposed surface etc. with Salwood | Cum | 51,011.00 |
| 8.64 | Providing and fixing bright finished brass indicating bolt (vacant/ engaged) with brass polished MS screws complete | Each | 148.00 |
| 8.66 | Providing and fixing bright finished brass furniture handles 50 mm with brass screws/nuts etc complete | Each | 45.00 |
| 8.67 | Providing and fixing of bright finished brass mortise latch and lock 100x65mm with six levers and a pair of lever handles with brass polished MS screws etc. complete | Each | 825.00 |
| 8.68 | Providing and fixing of bright finished brass mortise latch 100X65mm and pair of lever handles with brass polished MS screws etc. complete | Each | 741.00 |
| 8.69 | Providing and fixing bright finished brass rim latch and lock 100mm and pair of knob with brass polished MS screws etc. Complete | Each | 383.00 |
| 8.70 | Providing and fixing bright finished brass 100mm rim latch with a dead bolt and a pair of knobs, brass polished MS screws etc. complete | Each | 360.00 |
| 8.72 | Providing and fixing 50mm bright finished brass cupboard or ward robe knob with brass screws | Each | 26.00 |
| 8.73 | Providing and fixing 150mm bright finished brass floor door stopper with rubber cushion & brass polished MS screws etc complete to suit the shutter thickness | Each | 62.00 |
| 8.76 | Providing and fixing bright finished brass hanging door stopper with necessary brass finished MS steel screws complete | Each | 37.00 |
| 8.83 | Providing and fixing antique/ SS finished brass indicating bolt (Vacant/ engaged) with antique/ SS polished MS screw complete | Each | 153.00 |
| 8.85 | Providing and fixing antique/ SS finished brass furniture handles 50 mm with antique/ SS polished MS screws/nuts etc complete | Each | 44.00 |
| 8.86 | Providing and fixing 100mm antique/ SS finished brass mortise latch and lock with six levers and a pair of lever handles with antique/ SS polished MS screw complete | Each | 864.00 |
| 8.87 | Providing and fixing antique/ SS finished brass 100mm mortise latch with one dead bolt and pair of lever handles with antique/ SS polished MS screw complete | Each | 776.00 |
| 8.88 | Providing and fixing 100 mm antique/ SS finished brass rim latch and lock with a pair of knobs with antique/ SS polished MS screw complete | Each | 399.00 |
| 8.89 | Providing & fixing 100mm antique/ SS finished brass rim latch with a dead bolt and pair of knobs with antique/ SS polished MS screw complete | Each | 377.00 |
| 8.90 | Providing & fixing 150mm antique/ SS finished brass floor door stopper with rubber cushion and antique/ SS polished MS screw complete to suit the shutter thickness | Each | 65.00 |
| 8.93 | Providing and fixing antique/ SS finished brass hanging door stopper with necessary antique/ SS finished MS steel screws complete | Each | 42.00 |
| 8.97 | Providing and fixing M.S. bright finished or black enameled Piano hinges 1mm thick with 35mm wide flange including necessary iron screws | Metre | 83.00 |
| 8.98 | Providing and fixing M.S. nickel plated Piano hinges 1mm thick with 35mm wide flange including necessary iron screws | Metre | 94.00 |
| 8.101 | Providing and fixing M.S. bright finished or black enameled 85x12mm pull bolt lock with necessary nuts and necessary iron screws | Each | 30.00 |
| 8.106 | Providing and fixing MS bright finished single hanging door stopper with necessary MS steel screws complete | Each | 11.00 |
| 8.109.1 | Providing and fixing powder coated M.S. piano hinges with necessary iron screws:Overall width 35mm | Each | 83.00 |
| 8.109.2 | Providing and fixing powder coated M.S. piano hinges with necessary iron screws:Overall width 50 mm | Each | 94.00 |
| 8.109.3 | Providing and fixing powder coated M.S. piano hinges with necessary iron screws:Overall width 65 mm | Each | 125.00 |
| 8.110 | Providing and fixing powder coated M.S. pull bolt lock size 85x42mm with bolts, nut and necessary iron screws | Each | 31.00 |
| 8.111 | Providing and fixing powder coated M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 200 gms.) | Each | 27.00 |
| 8.114 | Providing and fixing powder coated M.S. pull bolt lock of size 85 x 12mm with necessary bolts, nuts and necessary iron screws | Each | 29.00 |
| 8.119 | Providing and fixing powder coated MS hanging door stopper with necessary powder coated MS steel screws complete | Each | 13.00 |
| 8.136.1 | Providing and fixing stainless steel piano hinges with necessary stainless steel screws etc complete.Overall width 35mm | Each | 117.00 |
| 8.136.2 | Providing and fixing stainless steel piano hinges with necessary stainless steel screws etc complete.Overall width 25 mm | Each | 105.00 |
| 8.145.1 | Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete.Triple strip vertical type | Each | 18.00 |
| 8.145.2 | Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete.Double strip (horizontal type) | Each | 14.00 |
| 8.147 | Providing and fixing sliding arrangement in racks/ cupboards/ cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) | Each | 12.00 |
| 8.148.1 | Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-chargeExtruded section Profile size 48x40 mm | Metre | 162.00 |
| 8.148.2 | Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-chargeExtruded section Profile size 42x50 mm | Metre | 167.00 |
| 8.150 | Providing and fixing factory made 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm ± 0.3mm. PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25mm X 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification | Sqm | 2,196.00 |
| 8.151 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge | Metre | 294.00 |
| 8.152.1 | Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter).PVC door shutter | Sqm | 1,970.00 |
| 8.152.2 | Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter).Both side Pre-laminated panel PVC door shutter | Sqm | 2,407.00 |
| 8.153 | Providing and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) paneled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 thick FRP laminate for panels confirming to IS: 14856 - 2000, complete | Sqm | 1,795.00 |
| 8.154 | Providing and fixing 30mm thick fibreglass reinforced plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856: 2000, complete | Sqm | 2,206.00 |
| 8.155 | Providing and fixing factory made Pre-laminated particle board flat pressed three layer or graded wood particle board shutter (25 mm thick) with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium 'U' type edge beading all-round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of stainless steel hinges 100x1.7mm etc complete as per direction of Engineer-in-Charge | Sqm | 2,961.00 |
| 8.156 | Providing and fixing cupboard shutters 25mm thick, with Pre- laminated flat pressed with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 25mm thick confirming to IS:14587 including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge | Sqm | 1,521.00 |
| 8.157 | Providing and fixing aluminum U beading of required size to Pre- laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge | KG | 434.00 |
| 8.158 | Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc complete | Each | 1,233.00 |
| 8.159 | Providing and fixing IS: 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc complete | Each | 895.00 |
| 8.161 | Supplying and fixing teak wood fillets (10 mm x 10 mm size) including nails etc complete | Metre | 23.00 |
| 8.162 | Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2nos. Vertically and 1nos. Horizontally 50x2mm thick M.S. flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings. The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight | Sqm | 4,311.00 |
| 8.163 | Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 A. 1 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) | Sqm | 6,722.00 |
| 8.163 | Casement window double panels with S.S. friction hinges (300 x 19 x A. 2 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm) | Sqm | 6,190.00 |
| 8.163 | Casement window double panels with top fixed with S.S. friction A. 3 hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm) | Sqm | 4,949.00 |
| 8.163 | Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 A. 4 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) | Sqm | 6,938.00 |
| 8.163 | Casement window double panels with S.S. friction hinges (350 x 19 x A. 5 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm) | Sqm | 7,117.00 |
| 8.163 | Casement cum fixed panel window having both end single A. 6 casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm, sash 67 x 80 mm, & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm) | Sqm | 5,330.00 |
| 8.164 | Fixed window / ventilator made of (small series) frame 47 x 50 mm & B. 1 mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) | Sqm | 4,590.00 |
| 8.165 | Casement door with 3D hinges made of (big series) frame 67 x 64 C. 1 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) | Sqm | 6,681.00 |
| 8.165 | Casement door with top hung ventilator with 3D and S.S. friction C. 2 hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm) | Sqm | 6,814.00 |
| 8.166 | Two track two panels sliding window made of (small series) frame 52 D. 1 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) | Sqm | 4,767.00 |
| 8.166 | Two track two panels sliding window made of (big series) frame 67 x D. 3 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm upto 2.50 sqm) | Sqm | 4,952.00 |
| 8.166 | Three track three panels sliding window made of (big series) frame D. 5 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) | Sqm | 5,856.00 |
| 8.166 | Two track four panels sliding window made of (big series) frame 67 x E. 2 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm) | Sqm | 4,159.00 |
| 8.167 | Two track two panels sliding door made of (big series) frame 67 x 50 F. 1 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) | Sqm | 4,303.00 |
| 8.167 | Two track four panels sliding door made of (big series) frame 67 x 50 F. 2 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto 10.00 sqm) | Sqm | 3,818.00 |
| 8.167 | Three track three panels sliding door made of (big series) frame 116 x F. 3 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) | Sqm | 4,341.00 |
| 8.167 | Three track three panels sliding door with fly proof S.S wire mesh (Two F. 3 nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) | Sqm | 5,553.00 |
| 8.169 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete | Each | 127.00 |
| 8.170 | Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete | Each | 106.00 |
| 8.171 | Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete | Each | 61.00 |
| 8.172 | Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete | Each | 96.00 |
| 8.173 | Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete | Each | 116.00 |
| 8.174 | Providing & Fixing MLA Table of size 1500x460x940 mm making with 1st class Bijapur / Batul / Balaghat forest Teak wood (Premium Quality) with including carving, P.U. polishing and finishing with all tools, tackle and labour etc. complete as per drawing and specifications and under the overall direction of the Engineer-in- charge | Each | 1,85,370.00 |
| 8.175 | Providing & Fixing Double seater Sofa cum Chair (1500 mm x 650 mm x 1090 mm)made with 1st class Bijapur/Batul/Balaghat forest Teak wood (Premium Quality) 18 mm thick boil water proof Ply as per I.S.710:2010, 1st Quality Teak Bead of 18/12mm thick as per required size and upholstery are of 4 inch thick 50 Density (Lbs/Cuf) foam and 1 inch thick 32 Density (Lbs/Cuf) Foam & High Quality Leatherite 380GSM [composition-100 PU Heavy, Soft Feel, Anti Scratch fabric Item Code (Affinity-Moss 0160552) or equivalent of choice colour with stiching] and fixing in proper manner with carving & P.U. polishing to wooden members finishing with all tools tackle labour etc. complete as per drawing and specifications and under the overall direction of the Engineer-in-charge | Each | 1,50,538.00 |
| 8.176 | Providing and fixing of Table for Hon. Minister of size Length 3600 mm width 1500mm and height 900mm made of first Quality Teak wood with 18mm and 6mm thick BWP calibrated ply, 4mm natural teak veneer and 1mm thick laminate sheet (make Green ply, Century, Anchor, Archid ply or equivalent ) colour and surface as per Selection, with neccesary hardware fitting's (make Hettich, Hafele, Dorma or equivalent adhesive (make pidilite, Laticrete or equivalent), teak wood bead of provided size (as per dr‹rwing). providing and laying PU polish on new wo‹›d work (Three or more coats) with spray machine after sandpaper surfacing 2, Coat Polyster insulator, dent filler where ever neccessary, Dimensions of the table should be according to architecture drawing A-1 annexed and as per direction of Engineer in charge | Each | 2,41,777.00 |
| 8.177 | Providing and fixing of SECRETARY TABLE of size Length 2100mm width 750mm and height 900 mm made of first Quality Teak wood with 18 mm thick BWP Calibrated ply marine grade ply, 4mm natural teak veneer and 1 mm thick laminated sheet (Green ply, Century, Anchor, Archid ply or equivalent ) colour and surface as per Selection, with necessary hardware fitting's (make Hettich, Hafele, Dorma or equivalent) adhesive (make pidilite, Laticrete or equivalent), first quality teak wood bead of provided size(as per drawing), providing and laying PU polish on new wood work (three or more coats) with spray machine after sandpaper surfacing, 2 Coat Polyster insulator, dent filler wherever necessary, Dimensions of the table should be according to architecture drawing A-2 annexed and as per direction of Engineer in charge | Each | 1,19,461.00 |
| 8.178 | Providing and fixing of SECRETARIAT TABLE of size Length 5400mm, width 1200mm and height 900 mm made of first Quality Teak wood with 18mm and 12mm thick BWP calibrated ply, 4mm natural teak veneer and 1mm thick laminate sheet (Green ply, Century, Anchor, Archid ply or equivalent ) colour and surface as per Selection, with necessary hardware fitting's (make Hettich, Hafele, Dorma or equivalent) adhesive (make pidilite, Laticrete or equivalent), teak wood bead of provided size (as per drawing), providing and laying PU polish on new wood work (three or mor coats) with spray machine after sandpaper surfacing, 2 Coat Polyster insulator, dent filler wherever necessary, Dimensions of the table should be according to architecture drawing A-3 annexed and as per direction of Engineer in charge | Each | 3,96,644.00 |
| 8.179 | CONFERENCE TABLE (27 SEATER) Manufacturing and fixing of Modern Modular Conference Table of size 21200mm x 750mm having flexibility to join individual table unit to form 'U' shaped curved Conference Table. made of first Quality Teak wood with 18mm and 12mm thick BWP calibrated ply. 4mm natural teak veneer and 1mm thick laminate sheet (Green ply, Century, Anchor, Archid ply or equivalent ) colour, surface as per Selection confirming as per IS 3513:1966. with necessary hardware fitting's (make Hettich, Hafele, Dorma or equivalent) adhesive (make pidilite, Laticrete or equivalent), teak wood bead of provided size (as per drawing), providing and laying PU polish on new wood work (three or more coats) with spray machine after sandpaper surfacing, 2 Coat Polyster insulator. dent filler wherever necessary, making all necessary arrangement for all Accessories For Cabling tray to Attach required Portable Device's etc. MS stiffners are to be provided as and where required for stability. Dimensions of the table should be according to agriculture drawing A-7 annexed and as per direction of Engineer in charge. (Rate to be reduced/increased proportionately according to length or width as specified) | Each | 12,15,350.00 |
| 8.180 | CONFERENCE TABLE (21 SEATER)Manufacturing and fixing of Modern Modular Conference Table of size 16500mm x 750mm having flexibility to join individual table unit to form rectangular 'U' shaped Conference Table, made of first Quality Teak wood with 18mm and 12mm thick BWP calibrated ply, 4mm natural teak veneer and 1mm thick laminate sheet (Green ply, Century, Anchor, Archid ply or equivalent) colour, surface as per Selection confirming as per IS 3513:1966, with necessary hardware fitting's (make Hettich, Hafele, Dorma or equivalent) adhesive (make pidilite, Laticrete or equivalent), teak wood bead of provided size (as per drawing), providing and laying PU polish on new wood work (three or more coats) with spray machine after sandpaper surfacing, 2 Coat Polyster insulator, dent filler wherever necessary, making all necessary arrangement for all Accessories For Cabling tray to Attach required Portable Device's etc. MS stiffeners are to be provided as and where required for stability.Dimensions of the table should be according to architecture drawing A-5 annexed and as per direction of Engineer in charge. (Rate to be reduced / increased proportionately according to length or width as specified) | Each | 10,74,639.00 |
| 8.181 | CONFERENCE TABLE (17 SEATER) Manufacturing and fixing of Modem Modular Conference Table of size 13500mm x 750mm having flexibility to join individual table unit to form boat Curved Conference Table, made of first Quality Teak wood with 18mm and 12mm thick BWP calibrated ply, 4mm natural teak veneer and 1mm thick laminate sheer(Green ply, Century, Anchor, Archid ply or equivalent) colour, surface as per Selection confirming as per IS 3513:1966, with necessary hardware fitting's (make Hettich, Hafele, Dorma or equivalent) adhesive (make pidilite, Laticrete or equivalent), teak wood bead of provided size (as per drawing). providing and laying PU polish on new wood work (three or more coats) with spray machine after sanpaper surfacing, 2 Coat Polyster insulator, dent filler wherever necessary, making all neccessories arrangement for all Accessories For Cabling tray to Attach required portable Device's etc. MS stiffners are to be provided as and where required for stability. Dimensions of the table should be according to agriculture drawing A-4 annexed and as per direction of Engineer in charge. (Rate to be reduced/increased proportionately according to length or width as specified) | Each | 10,13,380.00 |
| 8.182 | CONFERENCE TABLE (15 SEATER) Manufacturing and fixing of Modem Modular Conference Table of size 5500mm width 2400mm and height 750mm made of first Quality Teak wood with 18mm and 12mm thick BWP calibrated ply, 4mm natural teak veneer and 1mm thick laminate sheet (Green ply, Century, Anchor, Archid ply or equivalent) colour, surface as per Selection confirming as per IS 3513:1966, with necessary hardware fitting's (make Hettich, Hafele, Dorma or equivalent) adhesive (make pidilite, Laticrete or equivalent), teak wood bead of provided size (as per drawing). providing and laying PU polish on new wood work (three or more coats) with spray machine after sanpaper surfacing, 2 Coat Polyster insulator, dent filler wherever necessary. Centred fixed to 8mm printed glass design finish at top making all neccessary arrangement for all Accessories For Cabling tray to Attach required portable Device's etc. The wire carrier dimensions for should be 185 mm x 75 mm x 75 mm. and to be made with 18 mm thick ply. MS stiffners are to be provided as and where required for stability. Dimensions of the table should be according to agriculture drawing A-6 annexed and as per direction of Engineer in charge. (Rate to be reduced/increased proportionately according to length or width as specified) | Each | 5,48,155.00 |
| 8.183 | Providing & Fixing Customized teak wood funiture for all Artistic decorative partition, shelves, cabinets of required thickness, length and height with 1st class Bijapur/Batul/Balaghat forest Teak wood (Premium Quality) including carving and 1st class finishing with all tools, tackle and labour etc. complete as per approved designs and specifications. (Including Grinding & rubbing all surfaces to smooth finish with gloss/Matt finish P.U. cleaner polish with following process in sequence as detailed. 1. The surface to be polished is rubbed with sand paper 80/120 no. & then with sand paper of 160/180 nos.2. Applying 2 coats of sealer with spray gun and allowing sufficient drying time for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade PU cleaner polish to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of PU Cleaner Polish polish is applied with spray gun using Pu Cleaner Polish clear poishand Pu Cleaner Polish thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final PU Cleaner Polish polish is applied with compressor pressure spray gun using Pu Cleaner Polish clear polish and Pu Cleaner Polish thinner mixed in required proportion complete as per direction of Engineer-in-Charge | Cum | 5,84,016.00 |
Other chapters in this schedule
- Earth Work (46)
- Form Work (20)
- Cement Concrete (Plain and Reinforced) (24)
- Water Proofing (25)
- Stone Work (12)
- Brick Work (44)
- Steel and Aluminium Work (73)
- Roofing and Ceiling (77)
- Plastering and Pointing (52)
- Flooring (87)
- Marble & Stone Wall Lining Work (24)
- Distempering, Painting and Finishing (57)
- Dismantling and Demolishing (53)
- Repair to Buildings (49)
- Sanitary Installations (64)
- Water Supply (64)
- Drainage (48)
- Tube Well & Rain Water Harvesting (8)
- Horticulture & Landscaping (32)
- Fire Fighting (30)
- Miscellaneous (8)
Pricing wood and pvc work against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works