Arunachal Pradesh SOR 2023
Steel Work rates
34 steel work items from the Arunachal Pradesh PWD, effective 2024-12-30.
Steel Work rates in the Arunachal Pradesh Building Schedule of Rates 2023 run from ₹32.20 to ₹25,889.90. Transcribed from Arunachal Pradesh PWD — APSR 2023, Schedule of Rates for Building Works and Services (zero lead based, excluding carriage cost), published under the authority of the Chief Engineer (CSQ), PWD Arunachal Pradesh, Itanagar; issued on the department's Schedule of Rates page 30 December 2024. Reference only — verify against the official source before pricing a bid.
/
34 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 10.1(a) | Steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red lead paintIn RS Joists | Quintal | 11,353.00 |
| 10.1(b) | Steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red lead paintIn Tees, Angles and Channels | Quintal | 11,556.60 |
| 10.1(c) | Steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red lead paintIn Flats up to 10 mm in thickness | Quintal | 10,653.10 |
| 10.2(a) | Steel work riveted or bolted in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paintIn RS Joists | Quintal | 11,319.00 |
| 10.2(b) | Steel work riveted or bolted in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paintIn Tees, Angles, Flats and Channels | Quintal | 12,562.30 |
| 10.3 | Providing and fixing in position collapsible steel shutters with vertical channels 20 mm x 10 mm x 2 mm and braced with flat iron diagonals 20 mm x 5 mm size with top and bottom rails of T iron 40 mm x 40 mm x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint | Sqm | 9,996.00 |
| 10.4 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete | Each | 193.60 |
| 10.6 | Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm MS laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of the top cover and spring | Sqm | 2,761.90 |
| 10.7 | Providing and fixing 27.5 cm long wire spring grade No. 2 for rolling shutters | Each | 650.70 |
| 10.8 | Providing and fixing top cover for rolling shutters | Metre | 1,031.90 |
| 10.9 | Providing and fixing ball bearing for rolling shutters | Each | 633.20 |
| 10.10 | Providing and fixing MS round holding down bolts with nuts and washer plates etc complete | Quintal | 15,072.90 |
| 10.11 | Providing and fixing bolts up to 300 mm in length including nuts and washers complete | Quintal | 20,301.00 |
| 10.12 | Providing and fixing bolts above 300 mm in length including nuts and washers complete | Quintal | 20,301.00 |
| 10.13 | Providing and fixing MS rivets of sizes in position | Quintal | 25,889.90 |
| 10.16 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately) | KG | 142.40 |
| 10.17 | Providing and fixing T-iron frames for doors, windows and ventilators of MS Tee sections joints mitred and welded with 15 x 3 mm legs, 10 cm long embedded in cement concrete block 15 cm x 10 cm x 10 cm size of 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or bolt and nuts as required, including fixing of necessary butt hinges and screws and applying a priming coat of approved primer | KG | 134.20 |
| 10.18 | Providing and fixing T-iron frames for doors, windows and ventilators of MS Tee sections joints mitred and welded with 15 x 3 mm legs, 10 cm long embedded in cement concrete block 15 cm x 10 cm x 10 cm size of 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded shingle 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or bolt and nuts as required, including fixing of necessary butt hinges and screws and applying a priming coat of approved primer | KG | 134.20 |
| 10.19(a) | Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metal-sash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of costFixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | KG | 58.40 |
| 10.19(b) | Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metal-sash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of costFixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) | KG | 32.20 |
| 10.20(a) | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment)Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | KG | 157.50 |
| 10.20(b) | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment)Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) | KG | 102.50 |
| 10.21 | Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with screws instead of glazing clips and metal sash putty, in steel doors, windows, ventilators and composite units | Metre | 58.70 |
| 10.22(a)(i) | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike- plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile BFixing with adjustable lugs with split end tail to each jamb | Metre | 446.20 |
| 10.22(a)(ii) | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike- plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile BFixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) | Metre | 431.40 |
| 10.22(b)(i) | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike- plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile CFixing with adjustable lugs with split end tail to each jamb | Metre | 474.60 |
| 10.22(b)(ii) | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike- plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile CFixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) | Metre | 459.70 |
| 10.22(c)(i) | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike- plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile EFixing with adjustable lugs with split end tail to each jamb | Metre | 516.40 |
| 10.22(c)(ii) | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike- plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile EFixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) | Metre | 501.50 |
| 10.23(a) | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as requiredIn stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | KG | 159.90 |
| 10.23(b) | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as requiredIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | KG | 147.40 |
| 10.24(b) | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primerE.R.W. tubes | KG | 148.10 |
| 10.24(c) | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primerG.I. pipes | KG | 298.50 |
| 10.25 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | KG | 606.30 |
Other chapters in this schedule
- Temporary Item (19)
- Earth Work (33)
- Mortar (16)
- Concrete Work (49)
- RCC Work (53)
- Brick Work (21)
- Stone Work (23)
- Walling (10)
- Wood Work (88)
- Flooring (97)
- Roofing (85)
- Finishing (102)
- Repair of Buildings (26)
- Dismantling (43)
- Miscellaneous (57)
- Drainage (21)
- Water Supply (118)
- Sanitary Installation (70)
- Aluminium Work (25)
- PVC & uPVC Work (12)
Pricing steel work against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works