Arunachal Pradesh SOR 2023
Finishing rates
102 finishing items from the Arunachal Pradesh PWD, effective 2024-12-30.
Finishing rates in the Arunachal Pradesh Building Schedule of Rates 2023 run from ₹10.20 to ₹426.50. Transcribed from Arunachal Pradesh PWD — APSR 2023, Schedule of Rates for Building Works and Services (zero lead based, excluding carriage cost), published under the authority of the Chief Engineer (CSQ), PWD Arunachal Pradesh, Itanagar; issued on the department's Schedule of Rates page 30 December 2024. Reference only — verify against the official source before pricing a bid.
/
102 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 13.15 | Neat cement punning | Sqm | 64.90 |
| 13.17 | Extra for plaster to ceiling above 5 m height from floor lavel for every additional height of one metre or part there-of | Sqm | 45.60 |
| 13.18 | Extra for plastering spherical ceiling | Sqm | 105.10 |
| 13.19 | Extra for providing and mixing water proofing materials in proportion recommended by the manufacturers | Sqm | 14.70 |
| 13.21 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof | Sqm | 45.90 |
| 13.22 | Extra for plastering on circular work not exceeding 6 m in radius | Sqm | 28.20 |
| 13.23 | Extra for plastering done on mouldings cornices or architraves including neat finishing to the line and level | Sqm | 426.50 |
| 13.25 | Extra if white cement is used instead of ordinary cement in top layer of 18 mm plastering with terrazzo finish | Sqm | 143.80 |
| 13.26 | Extra if red, chocolate, orange or buff (yellow) colour is added to grey or white cement in the top layer of 18 mm plastering with terrazzo finish | Sqm | 126.50 |
| 13.27 | Extra if black colour is added to grey or white cement in top layer of 18 mm plastering with terrazzo finish | Sqm | 206.60 |
| 13.28 | Extra if blue or green colour is added to grey or white cement in top layer of 18 mm plastering with terrazzo finish | Sqm | 138.00 |
| 13.34(a) | Pointing on brick work with cement mortar 1 : 3 (1 cement : 3 fine sand)Flush pointing | Sqm | 142.60 |
| 13.34(b) | Pointing on brick work with cement mortar 1 : 3 (1 cement : 3 fine sand)Ruled pointing | Sqm | 152.30 |
| 13.34(c) | Pointing on brick work with cement mortar 1 : 3 (1 cement : 3 fine sand)Cut or weather struck pointing | Sqm | 207.00 |
| 13.34(d) | Pointing on brick work with cement mortar 1 : 3 (1 cement : 3 fine sand)Raised and cut pointing | Sqm | 273.40 |
| 13.35(a) | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand)Flush pointing | Sqm | 137.40 |
| 13.35(b) | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand)Ruled pointing | Sqm | 146.80 |
| 13.35(c) | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand)Cut or weather struck pointing | Sqm | 180.20 |
| 13.35(d) | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand)Raised and Cut pointing | Sqm | 269.40 |
| 13.36(a) | Pointing on brick flooring with cement mortar 1 : 2 (1 cement : 2 fine sand)Flush pointing | Sqm | 110.60 |
| 13.36(b) | Pointing on brick flooring with cement mortar 1 : 2 (1 cement : 2 fine sand)Ruled pointing | Sqm | 119.60 |
| 13.37(a) | Pointing on brick flooring with cement mortar 1 : 4 (1 cement : 4 fine sand)Flush pointing | Sqm | 103.50 |
| 13.37(b) | Pointing on brick flooring with cement mortar 1 : 4 (1 cement : 4 fine sand)Ruled pointing | Sqm | 112.40 |
| 13.38 | White washing with lime on new work (two or more coats) to give an even shade | Sqm | 18.20 |
| 13.39(a) | White washing with lime on old work to give an even shadeIn two or more coats | Sqm | 18.30 |
| 13.39(b) | White washing with lime on old work to give an even shadeIn one coat | Sqm | 10.40 |
| 13.40 | White washing with whiting on new work (three or more coats) to give even shade | Sqm | 31.10 |
| 13.41(a) | White washing with whiting on old work to give even shadeIn two or more coats | Sqm | 18.60 |
| 13.41(b) | White washing with whiting on old work to give even shadeIn one coat | Sqm | 10.60 |
| 13.42 | Colour washing such as green, blue or buff on new work (two or more coats) including a base coat of white washing with lime to give an even shade | Sqm | 31.10 |
| 13.43(a) | Colour washing such as green, blue or buff with lime on old work to give an even shadeIn two or more coats | Sqm | 18.80 |
| 13.43(b) | Colour washing such as green, blue or buff with lime on old work to give an even shadeIn one coat | Sqm | 10.80 |
| 13.44 | Colour washing such as green, blue or buff on new work (two or more coats) including a base coat or white washing with whiting to give an even shade | Sqm | 31.20 |
| 13.45(a) | Colour washing such as green, blue or buff on old work with whiting to give an even shadeIn two or more coats | Sqm | 18.30 |
| 13.45(b) | Colour washing such as green, blue or buff on old work with whiting to give an even shadeIn one coat | Sqm | 10.60 |
| 13.46 | Hiramachi colour wash on new work (two or more coats) to give an even shade | Sqm | 34.10 |
| 13.47 | Hiramachi colour wash on old work (one or or more coats) to give an even shade | Sqm | 14.60 |
| 13.48 | Removing whitewash or colourwash by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete | Sqm | 10.20 |
| 13.49 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work including priming coat of whiting to give an even shade | Sqm | 98.90 |
| 13.50 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade | Sqm | 46.10 |
| 13.51 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade | Sqm | 133.20 |
| 13.53 | Applying one coat of distemper primer of approved brand and manufacture on wall surface | Sqm | 53.60 |
| 13.54 | Applying one coat of cement primer of approved brand and manufacture on wall surface | Sqm | 59.40 |
| 13.55 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade | Sqm | 218.90 |
| 13.56 | Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade on old work (one or more coats) to give an even shade | Sqm | 97.10 |
| 13.57 | Removing dry or oil bound distemper by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Sqm | 12.80 |
| 13.58 | Painting two coats with oil type wood preservative of approved brand and manufacture on new work | Sqm | 37.00 |
| 13.59 | Painting one coat with oil type wood preservative of approved brand and manufacture on old work | Sqm | 28.30 |
| 13.60 | Coal tarring two coats on new work using 0.16 and 0.12 litre of coal tar per Sq.m. in the first and second coat respectively | Sqm | 62.50 |
| 13.61 | Coal tarring one coat on old work using 0.12 litre of coal tar per Sq.m | Sqm | 35.20 |
| 13.62 | Applying priming coat consisting of a mixture of red lead, white lead and double boiled linseed oil in the ratio of 0.7 Kg : 0.7 Kg : 1 Litre on wood work complete | Sqm | 88.50 |
| 13.63 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete | Sqm | 59.00 |
| 13.64 | Applying priming coat of a mixture of red lead raw linseed oil and turpentine oil in the ratio of 2.80 Kg : 1 Litre : 1 Litre on steel work complete | Sqm | 85.30 |
| 13.65 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work | Sqm | 66.00 |
| 13.66 | Applying priming coat with ready mixed genuine red lead paint of approved brand and manufacture on steel work | Sqm | 57.50 |
| 13.67 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade | Sqm | 151.60 |
| 13.68 | Painting (one or more coats) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on old work to give an even shade | Sqm | 96.50 |
| 13.69 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade | Sqm | 131.40 |
| 13.70 | Painting one or more coats with superior quality ready mixed paint for steel work of approved brand and manufacture in all shades on old work to give an even shade | Sqm | 84.30 |
| 13.71 | Painting two or more coats on GI sheets with ready mixed superior paint of approved brand and manufacture on new work to give an even shade | Sqm | 113.50 |
| 13.72 | Painting one or more coats on GI sheets with ready mixed superior paint of approved brand and manufacture on old work to give an even shade | Sqm | 72.70 |
| 13.73 | Painting two or more coats on GI sheets with superior ready mixed paint of approved brand and manufacture in white, grey or green shades on new work to give an even shade | Sqm | 113.40 |
| 13.74 | Painting one or more coats on GI sheets with superior ready mixed paint of approved brand and manufacture in white, grey or green shades on old work to give an even shade | Sqm | 72.70 |
| 13.75 | Painting two or more coats with synthetic enamel paint of approved brand and manufacture in black or chocolate shade on new work over and including an under coat of suitable shade with ordinary paint of approved quality to give an even shade | Sqm | 127.40 |
| 13.76 | Painting one or more coats with synthetic enamel paint of approved brand and manufacture in black or chocolate shade on old work to give an even shade | Sqm | 82.20 |
| 13.77 | Painting one or more coats with black Japan paint of approved brand and manufacture to give an even shade | Sqm | 72.40 |
| 13.78 | Painting two or more coats with black anti-corrosive bituminoustic paint of approved brand and manufacture on new work to give an even shade | Sqm | 107.60 |
| 13.79 | Painting (two or more coats) with black anti-corrosive bitumastic paint of approved brand and manufacture on old work to give an even shade | Sqm | 70.00 |
| 13.80 | Painting two or more coats with enamel paint of approved brand and manufacture in any shade on new work to give an even shade | Sqm | 117.40 |
| 13.81 | Painting (one or more coats) with enamel paint of approved brand and manufacture on old work in any shade to give an even shade | Sqm | 76.60 |
| 13.82 | Painting (two or more coats) with aluminium paint of approved brand and manufacture on new work to give an even shade | Sqm | 127.10 |
| 13.83 | Painting (one or more coats) with aluminium paint of approved brand and manufacture on old work to give an even shade | Sqm | 80.10 |
| 13.84 | Floor painting (two or more coats) with floor paint of approved brand manufacture of green shade on new work to give an even shade | Sqm | 157.00 |
| 13.85 | Floor painting (one or more coats) with floor paint of approved brand manufacture of green shade on old work to give an even shade | Sqm | 99.50 |
| 13.86 | Wall painting (two or coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade | Sqm | 137.90 |
| 13.87 | Wall painting (one or more coats) with plastic emulsion paint of approved brand and manufacture on old work to give an even shade | Sqm | 88.40 |
| 13.88 | Varnishing (two or more coats) with Copal Varnish of approved brand and manufacture brand and manufacture on new work including an under coat of flatting varnish with glue sizing | Sqm | 180.80 |
| 13.89 | Varnishing (one or more coats) with Copal Varnish of approved brand and manufacture on old work | Sqm | 71.80 |
| 13.90 | Varnishing (two or more coats) with superior quality spar varnish of approved brand and manufacture brand and manufacture on new work including an under coat of flatting varnish with glue sizing | Sqm | 191.10 |
| 13.91 | Varnishing (one or more coats) with superior quality spar varnish of approved brand and manufacture on old work | Sqm | 77.60 |
| 13.92 | Oiling (two or more coats) with raw linseed oil on new work | Sqm | 57.80 |
| 13.93 | Oiling (one or more coats) with raw linseed oil on old work | Sqm | 41.00 |
| 13.94 | Polishing on wood work with ready mixed superior wax polish of approved brand and manufacture on new work | Sqm | 131.50 |
| 13.95 | Polishing on wood work with ready mixed superior wax polish of approved brand and manufacture on old work | Sqm | 66.10 |
| 13.96 | Floor polishing on masonry or concrete floors with superior brand and manufacture wax polish of approved brand and manufacture | Sqm | 60.40 |
| 13.97(b) | Painting two or more coats on rain water, soil waste and vent pipes and fittings with black anti-corrosive bituminoustic paint of approve brand and manufacture over a priming coat of ready mixed genuine red lead on new work100 mm dia | Metre | 57.50 |
| 13.97(c) | Painting two or more coats on rain water, soil waste and vent pipes and fittings with black anti-corrosive bituminoustic paint of approve brand and manufacture over a priming coat of ready mixed genuine red lead on new work150 mm dia | Metre | 85.40 |
| 13.98(b) | Painting one or more coats on rain water, soil waste and vent pipes and fittings with black anti-corrosive bituminoustic paint of approved brand and manufacture on old work100 mm dia | Metre | 24.80 |
| 13.98(c) | Painting one or more coats on rain water, soil waste and vent pipes and fittings with black anti-corrosive bituminoustic paint of approved brand and manufacture on old work150 mm dia | Metre | 36.20 |
| 13.99(b) | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved quality over a priming coat of ready mixed genuine red lead on new work100 mm dia | Metre | 64.00 |
| 13.99(c) | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved quality over a priming coat of ready mixed genuine red lead on new work150 mm dia | Metre | 94.70 |
| 13.100(b) | Painting one or more coats on rain water, soil waste and vent pipes and fittings with aluminium paint of approved quality on old work100 mm dia | Metre | 28.10 |
| 13.100(c) | Painting one or more coats on rain water, soil waste and vent pipes and fittings with aluminium paint of approved quality on old work150 mm dia | Metre | 41.20 |
| 13.103 | Removing old paint or polish with paint remover of approved brand and manufacture and preparing surface | Sqm | 98.80 |
| 13.104 | French spirit polishing (two or more coats) including a coat of wood filler on new work | Sqm | 249.90 |
| 13.105 | French spirit polishing (one or more coats) on old work | Sqm | 133.60 |
| 13.107 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paits/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the halp of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department | Sqm | 76.90 |
| 13.108(a) | Interior Walls : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surfaceWater thinnable cement primer | Sqm | 59.10 |
| 13.109(a) | Interior Walls : Finishing walls with water proofing cement paint of required shadeNew work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 175.20 |
| 13.110 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete | Sqm | 176.00 |
| 13.111(a) | Finishing walls with Acrylic Smooth exterior paint of required shadeNew work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | Sqm | 160.10 |
| 13.112(a) | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004 Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additivesNew work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm | Sqm | 141.80 |
Other chapters in this schedule
- Temporary Item (19)
- Earth Work (33)
- Mortar (16)
- Concrete Work (49)
- RCC Work (53)
- Brick Work (21)
- Stone Work (23)
- Walling (10)
- Wood Work (88)
- Steel Work (34)
- Flooring (97)
- Roofing (85)
- Repair of Buildings (26)
- Dismantling (43)
- Miscellaneous (57)
- Drainage (21)
- Water Supply (118)
- Sanitary Installation (70)
- Aluminium Work (25)
- PVC & uPVC Work (12)
Pricing finishing against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works