Arunachal Pradesh SOR 2023
Roofing rates
85 roofing items from the Arunachal Pradesh PWD, effective 2024-12-30.
Roofing rates in the Arunachal Pradesh Building Schedule of Rates 2023 run from ₹13.50 to ₹12,849.90. Transcribed from Arunachal Pradesh PWD — APSR 2023, Schedule of Rates for Building Works and Services (zero lead based, excluding carriage cost), published under the authority of the Chief Engineer (CSQ), PWD Arunachal Pradesh, Itanagar; issued on the department's Schedule of Rates page 30 December 2024. Reference only — verify against the official source before pricing a bid.
/
85 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 12.1(a) | Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses0.80 mm thick GI sheet | Sqm | 1,571.40 |
| 12.1(b) | Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses0.63 mm thick GI sheet | Sqm | 1,352.60 |
| 12.2 | Extra for providing and fixing corrugate GI sheets vertically or to a pitch exceeding to 60 degrees | Sqm | 15.50 |
| 12.3(a) | Extra for straight cutting and waste in CGI sheet roofing for making opening of area exceeding 40 Sq.dm. for chimney stacks, sky lights etc0.80 mm thick sheet | Metre | 185.60 |
| 12.3(b) | Extra for straight cutting and waste in CGI sheet roofing for making opening of area exceeding 40 Sq.dm. for chimney stacks, sky lights etc0.63 mm thick sheet | Metre | 166.90 |
| 12.4(a) | Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete0.80 mm thick GI sheet | Metre | 1,112.50 |
| 12.4(b) | Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete0.63 mm thick GI sheet | Metre | 975.10 |
| 12.5 | Providing 7 mm thick asbestos cement corrugated sheets roofing fixed with galvanised iron J or L hooks 8 mm dia. G.I. plain and bitumen washers complete excluding the cost of purlins, rafter and trusses | Sqm | 530.70 |
| 12.6 | Extra for providing and fixing wind ties of 40 x 6 mm flat iron section | Metre | 190.40 |
| 12.7(a) | Extra for straight cutting and waste in A.C. corrugated, semi-corrugated sheet roofing for making opening of area exceeding 40 Sq.dm. for chimney stacks, sky light etc7 mm thick corrugated sheets | Metre | 150.40 |
| 12.7(b) | Extra for straight cutting and waste in A.C. corrugated, semi-corrugated sheet roofing for making opening of area exceeding 40 Sq.dm. for chimney stacks, sky light etc7 mm thick semi-corrugated sheets | Metre | 150.40 |
| 12.8(a) | Providing and fixing ridges and hips in asbestos cement sheets roofing with G.I. J or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers completeClose fitting adjustable ridge | Metre | 481.60 |
| 12.8(b) | Providing and fixing ridges and hips in asbestos cement sheets roofing with G.I. J or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers completeSerrated or plain wing adjustable ridge | Metre | 381.40 |
| 12.9 | Lime concrete terracing on roofs average thickness 10 cm laid to fall with 25 mm gauge brick ballast and 50% mortar consisting of 1lime putty and 2 surki finished with gur and belgiri treatment complete | Sqm | 1,108.60 |
| 12.10 | Lime concrete terracing on roofs, average thickness 10 cm laid to fall with 25 mm gauge brick ballast and 50% mortar consisting of 1 lime putty and 2 surki finished with gur and belgiri treatment complete and covered with flat brick tiles grouted with cement mortar 1 : 3 (1 cement : 3 fine sand) over 12 mm layer cement mortar 1 : 3 (1 cement : 3 fine sand) and finished neat | Sqm | 2,160.30 |
| 12.11 | Extra for every additional 5.0 mm thickness of lime concrete terracing | Sqm | 52.40 |
| 12.13(a) | Providing and fixing 20 mm thick wooden planks ceiling (frame work for base to be paid separately) with M.S. screwsTimber Plank Class - A IV | Sqm | 1,604.40 |
| 12.13(b) | Providing and fixing 20 mm thick wooden planks ceiling (frame work for base to be paid separately) with M.S. screwsTimber Plank Class - B I | Sqm | 1,426.00 |
| 12.14 | Providing and fixing 12 mm thick insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) | Sqm | 1,627.50 |
| 12.15 | Providing and fixing 12 mm thick unveneered teak wood particle board of approved quality with necessary nails etc. complete (frame work to be paid separately) | Sqm | 1,111.50 |
| 12.16 | Providing and fixing 3 mm thick hard board sheet ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) | Sqm | 550.30 |
| 12.17 | Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately). Providing and fixing plain Multipurpose 6mm thick Cement board (High Pressure steam cured) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) | Sqm | 610.60 |
| 12.19(a) | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceilingBest local approved quality wood | Metre | 102.90 |
| 12.19(b) | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceilingLocal soft wood | Metre | 98.60 |
| 12.20 | Extra for making chamfered edges of beading | Metre | 20.00 |
| 12.21 | Providing and fixing 600 mm long 100 mm diameter stone ware pipe in cement mortar 1 : 4 (1 cement : 4 fine sand) | Each | 350.30 |
| 12.22 | Providing and fixing 600 mm long 100 mm dia cement pipe in cement mortar 1 : 4 (1 cement : 4 fine sand) | Each | 514.10 |
| 12.23(a) | Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 (1 cement : 2 fine sand)75 mm diameter pipe | Metre | 941.70 |
| 12.23(b) | Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 (1 cement : 2 fine sand)100 mm diameter pipe | Metre | 1,139.00 |
| 12.23(c) | Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 (1 cement : 2 fine sand)150 mm diameter pipe | Metre | 1,731.00 |
| 12.24(a) | Providing and fixing M.S. Holder bat clamps of approved design of C.I. or S.C.I. pipes embedded in and including cement concrete block 10 cm x 10 cm x 10 cm of 1 : 2 : 4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm nominal size) including cost of cutting holes and making good the wall etc75 mm diameter | Each | 229.40 |
| 12.24(b) | Providing and fixing M.S. Holder bat clamps of approved design of C.I. or S.C.I. pipes embedded in and including cement concrete block 10 cm x 10 cm x 10 cm of 1 : 2 : 4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm nominal size) including cost of cutting holes and making good the wall etc100 mm diameter | Each | 238.80 |
| 12.24(c) | Providing and fixing M.S. Holder bat clamps of approved design of C.I. or S.C.I. pipes embedded in and including cement concrete block 10 cm x 10 cm x 10 cm of 1 : 2 : 4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm nominal size) including cost of cutting holes and making good the wall etc150 mm diameter | Each | 249.60 |
| 12.25(a) | Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 (1 cement: 2 fine sand)55 mm projection - 75 mm diameter | Each | 359.10 |
| 12.25(b) | Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 (1 cement: 2 fine sand)55 mm projection - 100 mm diameter | Each | 591.00 |
| 12.25(c) | Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 (1 cement: 2 fine sand)55 mm projection - 150 mm diameter | Each | 789.60 |
| 12.25(d) | Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 (1 cement: 2 fine sand)150 mm projection - 75 mm diameter | Each | 464.30 |
| 12.25(e) | Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 (1 cement: 2 fine sand)150 mm projection - 100 mm diameter | Each | 755.10 |
| 12.25(f) | Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 (1 cement: 2 fine sand)150 mm projection - 150 mm diameter | Each | 812.80 |
| 12.26(a) | Providing and fixing for A.C. pipe on wall plugs and standard holder bat clamp comprising of two semicircular halves of flat iron and cast iron base screwed on wooden plugs80 mm diameter | Each | 307.70 |
| 12.26(b) | Providing and fixing for A.C. pipe on wall plugs and standard holder bat clamp comprising of two semicircular halves of flat iron and cast iron base screwed on wooden plugs100 mm diameter | Each | 317.00 |
| 12.27(a) | Providing and fixing on wall face asbestos cement rain water pipe including jointing with spun yarn soaked in bitumen and cement mortar 1 : 2 (1 cement: 2 coarse sand) complete80 mm diameter | Metre | 225.10 |
| 12.27(b) | Providing and fixing on wall face asbestos cement rain water pipe including jointing with spun yarn soaked in bitumen and cement mortar 1 : 2 (1 cement: 2 coarse sand) complete100 mm diameter | Metre | 411.00 |
| 12.28(b) | Providing and fixing on wall face asbestos cement fittings for rain water pipe including jointing with spun yarn soaked in bitumen and cement mortar 1 : 2 (1 cement : 2 coarse sand)Offset 50 mm projection - 100 mm dia | Each | 164.70 |
| 12.28(b) | Providing and fixing on wall face asbestos cement fittings for rain water pipe including jointing with spun yarn soaked in bitumen and cement mortar 1 : 2 (1 cement : 2 coarse sand)Offset 150 mm projection - 100 mm dia | Each | 327.90 |
| 12.29 | Providing and fixing 25 mm to 40 mm diameter muli bamboo roof frame at 15 cm centre to centre including G.I. wire tied complete with one layer dhari mat lining on roof frame | Sqm | 416.50 |
| 12.30 | Providing and fixing 25 mm to 40 mm diameter muli bamboo roof frame at 22.5 cm centre to centre including G.I. wire tied complete with one layer dhari mat lining on roof frame | Sqm | 321.70 |
| 12.31 | Bamboo shingle roofing with 10 cm spacing of shingles and bamboo battens tied with G.I. wire including erecting and placing in position complete (roof frame to be paid separately) | Sqm | 867.40 |
| 12.32(a) | Thatch roofing with superior quality sungrass on bamboo roof frame tied with G.I. wire complete (roof frame to be paid separately)22.50 cm thick thatching | Sqm | 362.70 |
| 12.32(b) | Thatch roofing with superior quality sungrass on bamboo roof frame tied with G.I. wire complete (roof frame to be paid separately)15 cm thick thatching | Sqm | 287.40 |
| 12.32(c) | Thatch roofing with superior quality sungrass on bamboo roof frame tied with G.I. wire complete (roof frame to be paid separately)10 cm thick thatching | Sqm | 176.90 |
| 12.32(d) | Thatch roofing with superior quality sungrass on bamboo roof frame tied with G.I. wire complete (roof frame to be paid separately)7.50 cm thick thatching | Sqm | 173.00 |
| 12.33 | Ridge and hips with double dhari and one layer of tarja | Metre | 230.50 |
| 12.34 | Ridge and hips with sungrass (new) | Metre | 44.40 |
| 12.35(a) | Providing double dhari mat ceiling strengthened with split bamboo battens and tied with G.I. wire including fittings and fixing complete15 cm apart batten | Sqm | 299.00 |
| 12.35(b) | Providing double dhari mat ceiling strengthened with split bamboo battens and tied with G.I. wire including fittings and fixing complete22.50 cm apart batten | Sqm | 254.90 |
| 12.36 | Providing champakampa tarja ceiling with slipt bamboo battens and tied with G.I. wire including fitting and fixing complete | Sqm | 807.00 |
| 12.37 | Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown or/and residual bitumen applied hot @ 1.45 Kg. per Sq.m. of area for each courses, second course of roofing felt type-3 grade-I (hessian base self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea size gravel spread at 6 Cu.dm. per sqm. including preparation of surface excluding grading complete | Sqm | 478.60 |
| 12.38 | Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or/and residual bitumen applied hot @ 1.45,1.20 & 1.45 Kg. per Sq.m. of area respectively, second & fourth courses of roofing felt type-3 grade-I (hessian base finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea size gravel spread at 6 Cu.dm. per Sq.m. including preparation of surface excluding grading complete | Sqm | 752.40 |
| 12.39 | Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or/and residual bitumen applied hot @ 1.45, 1.20 & 1.70 Kg. per Sq.m. of area respectively, second & fourth courses of roofing felt type-2 grade-I (fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea size gravel spread at 6 Cu.dm. per Sq.m. including preparation of surface excluding grading complete | Sqm | 874.80 |
| 12.40 | Supplying and applying bituminious solution primer on roof and or wall surface at 0.24 litre per Sq.m | Sqm | 78.30 |
| 12.41 | Supplying and laying under layer of bitumen saturated felt type-I | Sqm | 160.70 |
| 12.42(a) | Deduct for omitting in water proffing treatment final course of spreading stone grit 6 mm and down size or pea sized gravelAt 6 Cu.dm. per Sq.m | Sqm | 13.50 |
| 12.42(b) | Deduct for omitting in water proffing treatment final course of spreading stone grit 6 mm and down size or pea sized gravelAt 8 Cu.dm. per Sq.m | Sqm | 17.50 |
| 12.43(a) | Grading roof for water proofing treatment withLime concrete with 20 mm nominal size brick aggregate and 50% lime mortar 1 : 2 (1 lime putty : 2 surki) | Cum | 10,974.80 |
| 12.43(b) | Grading roof for water proofing treatment withCement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | Cum | 7,829.50 |
| 12.43(c) | Grading roof for water proofing treatment withCement mortar 1 : 3 (1 cement : 3 coarse sand) | Cum | 12,849.90 |
| 12.43(d) | Grading roof for water proofing treatment withCement mortar 1 : 4 (1 cement : 4 coarse sand) | Cum | 11,254.80 |
| 12.44 | Providing and laying plastic roofing compound standard black (using 2.75 Kg. per Sq.m.) over a surface painted with cold liquid plastic roofing compound at 0.24 Litre per Sq.m. including spreading coarse sand over the top surface at 6 Cu.dm. per Sq.m. etc. complete | Sqm | 469.90 |
| 12.45(a) | Providing Alumunium Corrugated Sheet Roofing fixed with 'J' hooks,bolts,nuts, washer with bitumen (the 'J' hook,nut and bolt are as per IS:733 of 1983) and limpet washer filled with white lead complete excluding the cost of the purlins,rafters and trussesUsing 0.65 mm thick Alumunium Corrugated Sheet | Sqm | 1,320.60 |
| 12.45(b) | Providing Alumunium Corrugated Sheet Roofing fixed with 'J' hooks,bolts,nuts, washer with bitumen (the 'J' hook,nut and bolt are as per IS:733 of 1983) and limpet washer filled with white lead complete excluding the cost of the purlins,rafters and trussesUsing 0.71 mm thick Alumunium Corrugated Sheet | Sqm | 1,391.40 |
| 12.46(a) | Providing Alumunium Troughed Sheet Roofing fixed with 'J' hooks,bolts,nuts, washer with bitumen (the 'J' hook,nut and bolt are as per IS:733 of 1983) and limpet washer filled with white lead complete excluding the cost of the purlins,rafters and trussesUsing 0.65 mm thick Alumunium Troughed Sheet | Sqm | 1,395.20 |
| 12.46(b) | Providing Alumunium Troughed Sheet Roofing fixed with 'J' hooks,bolts,nuts, washer with bitumen (the 'J' hook,nut and bolt are as per IS:733 of 1983) and limpet washer filled with white lead complete excluding the cost of the purlins,rafters and trussesUsing 0.71 mm thick Alumunium Troughed Sheet | Sqm | 1,477.50 |
| 12.47 | Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. Details of cost for 179.655 Sq.m.Laying and fixing 20 sheets in 3 row require Overall Sheet area of 20 x 3 x 3.05 x 1.072 plus 3% wastages = 202.061 Sqm After H & L laping as per manufacturer's specification, effective Area Measurable will be 20 x 3x 2.95 x 1.015 = 179.655 Sqm | Sqm | 933.80 |
| 12.48 | Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet ridges fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. Details of cost for 11.75m Laying and fixing 4 lenths of 3.05m each require Overall length of 4 x 3.05 plus 3% wastages = 12.566m After laping as per manufacturer's specification, effective Measurable length will be (4 x 3.05) - (3 x 0.15) = 11.75m | Metre | 1,055.20 |
| 12.49(a) | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks) | Sqm | 1,336.10 |
| 12.49(b) | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks) | Sqm | 1,272.40 |
| 12.49(c) | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with12.5 mm thick tapered edge gypsum moisture resistant board | Sqm | 1,273.90 |
| 12.49(d) | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting withFully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15% perforated area with perforation size and pattern as approved by the Engineer-in- charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 | Sqm | 1,454.40 |
| 12.50(a) | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes75 mm diameter | Metre | 252.00 |
| 12.50(b) | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes110 mm diameter | Metre | 334.80 |
| 12.51(a) | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required1.00 mm thick with zinc coating not less than 275 gm/m² | Sqm | 1,847.70 |
| 12.51(b) | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required0.80 mm thick with zinc coating not less than 275 gm/m² | Sqm | 1,590.10 |
| 12.51(c) | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required0.63 mm thick with zinc coating not less than 275 gm/ m² | Sqm | 1,370.80 |
| 12.52(a) | Providing and fixing of 40 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.l. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse sand)1.00 mm thick with zinc coating not less than 275 gm/m² | Metre | 931.60 |
Other chapters in this schedule
- Temporary Item (19)
- Earth Work (33)
- Mortar (16)
- Concrete Work (49)
- RCC Work (53)
- Brick Work (21)
- Stone Work (23)
- Walling (10)
- Wood Work (88)
- Steel Work (34)
- Flooring (97)
- Finishing (102)
- Repair of Buildings (26)
- Dismantling (43)
- Miscellaneous (57)
- Drainage (21)
- Water Supply (118)
- Sanitary Installation (70)
- Aluminium Work (25)
- PVC & uPVC Work (12)
Pricing roofing against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works