Skip to main content

Tripura SOR 2023

Wood & PVC Work rates

291 wood & pvc work items from the Tripura PWD (R&B and Buildings), effective 2023-04-01.

Wood & PVC Work rates in the Tripura Building Schedule of Rates 2023 run from ₹16.70 to ₹3,15,042.70. Transcribed from Tripura PWD — SoR 2023: Building Works, basic rates as on or just before 01.04.2023. Reference only — verify against the official source before pricing a bid.

Download the full schedule (Excel)All 17 chapters

291 items — scroll the table to browse

DescriptionUnit
8.1.1Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in positionSal WoodCum1,32,528.10
8.1.2Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in positionKarai woodCum1,11,635.80
8.1.3Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in positionLocal Teak WoodCum1,06,388.30
8.2.1Extra for additional labour for circular works, such as in frames of fan lightSal WoodCum13,253.06
8.2.2Extra for additional labour for circular works, such as in frames of fan lightKarai woodCum11,165.30
8.2.3Extra for additional labour for circular works, such as in frames of fan lightLocal Teak WoodCum10,638.89
8.3Providing laminated veneer lumber conforming to IS: 14616 and TAD -15: 2001( Part B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position as per directions of Engineer-in-chargeCum1,33,823.33
8.4.1Providing wood work in frames of false ceiling, partitions etc. sawn and put up in positionSal woodCum1,24,831.10
8.4.2Providing wood work in frames of false ceiling, partitions etc. sawn and put up in positionKarai Wood Local Teak WoodCum1,04,047.78
8.4.5Providing wood work in frames of false ceiling, partitions etc. sawn and put up in positionSoft WoodCum51,858.42
8.6.1Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 to 40 mm thickLocal Teak Wood 16 mm thickSqm1,983.10
8.6.2Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 to 40 mm thickGamair Wood 16 mm ThickSqm2,172.20
8.6.3.1Ply wood 5 ply, 9 mm thickDecorative plywood both side decorative veneer (Type - 1) conforming to IS 1328 BWR typeSqm2,401.00
8.6.3.2Ply wood 5 ply, 9 mm thickDecorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type Ply wood 7 ply, 9 mm thickSqm2,380.10
8.6.4.1Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 to 40 mm thickDecorative plywood both side decorative veneer (Type - 1) conforming to IS 1328 BWR typeSqm2,065.10
8.6.4.2Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 to 40 mm thickDecorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR TypeSqm2,520.00
8.6.5.1Particle Board 12 mm thickPlain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 markedSqm1,317.20
8.6.5.2Particle Board 12 mm thickVeneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS:3097, grade I. Particle Board 12 mm thickSqm1,630.30
8.6.5.3Particle Board 12 mm thickPrelaminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 markedSqm1,779.00
8.6.5.4Particle Board 12 mm thickPrelaminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 markedSqm1,756.30
8.8.1Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS 14616 and TADS 15:2001 (Part B), using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws as per direction of Engineer-in- charge30 mm thick shuttersSqm3,054.60
8.9.1Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, window and clereslory window shutters (Area of opening of glass panes excluding portion inside rebate shall be measured)5.5mm thick instead of 4mm thickSqm319.40
8.10Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)Sqm175.80
8.12Extra for providing ISI marked Stainless Steel butt hinges instead of black enamelled M.S. butt hinges with necessary screws. (Shutter area to be measured)Sqm193.40
8.13.1Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part B) including ISI marked black enamelled M.S. butt hinges with necessary screws as per directions of Engineer-in- charge and panelling with panels of12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I, IS: 3087 marked bonded with BWP type synthetic resin adhesive as per IS: 848Sqm3,055.80
8.13.2Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part B) including ISI marked black enamelled M.S. butt hinges with necessary screws as per directions of Engineer-in- charge and panelling with panels of12 mm thick prelaminated (with particle board decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - 1, conforming to IS: 3087 bonded with BWP type synthetic resin adhesive as per IS:848 and prelamination confirming to IS: 12823 Grade 1, Type - II markedSqm3,221.40
8.13.3Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part B) including ISI marked black enamelled M.S. butt hinges with necessary screws as per directions of Engineer-in- charge and panelling with panels of12 mm thick one side prelaminated (with particle board decorative lamination on other sides) and balancing lamination grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS: 3087 bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade - 1, Type II markedSqm3,535.00
8.14.1Providing and fixing 25 mm thick shutters for cup board etcPanelled or panelled & glazed shutters: Local teak wood including ISI marked anodised aluminium butt hinges with necessary screwsSqm2,858.50
8.14.1Providing and fixing 25 mm thick shutters for cup board etcGlazed shutters: Local teak wood including ISI marked anodised aluminium butt hinge with necessary screwsSqm2,649.90
8.15.1Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS: 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)12 mm thickSqm768.30
8.15.2Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS: 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)18 mm thickSqm1,009.90
8.16Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 200x19x1.9 mm 250 x 19 x 1.9 mm 300 x 19 x 1.9 mm 350 x 19 x 1.9 mm 400 x 19 x 1.9 mmEach347.50
8.16.1Providing and fixing prelaminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked with one side decorative and other side balancing lamination Grade I,Type II exterior grade IS: 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethene primer (fittings to be paid separately)18mm thickSqm1,309.70
8.16.2Providing and fixing prelaminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked with one side decorative and other side balancing lamination Grade I,Type II exterior grade IS: 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethene primer (fittings to be paid separately)25 mm thickSqm1,891.50
8.17Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 12 mm thick. 18 mm thick. 25 mm thickSqm1,110.90
8.17.1Providing and fixing 25 mm thick shutters for cupboards etc. including ISl marked black enamelled M.S. butt hinges with necessary screwsPanelled or panelled and glazed shutters Gamair WoodSqm2,837.50
8.17.1Providing and fixing 25 mm thick shutters for cupboards etc. including ISl marked black enamelled M.S. butt hinges with necessary screwsGlazed shutters Gamair WoodSqm2,883.40
8.18Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-chargeEach258.90
8.18.1Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters35 mm thick including ISI marked Stainless Steel butt hinges with necessary screwsSqm3,720.60
8.18.2Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters30 mm thick including ISI marked Stainless Steel butt hinges with necessary screwsSqm3,367.70
8.18.3Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S.Piano hinges IS: 3818 marked with necessary screwsSqm2,964.70
8.19.1Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters35 mm thick including ISI marked Stainless Steel butt hinges with necessary screwsSqm2,313.90
8.19.2Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters30 mm thick including ISI marked Stainless Steel butt hinges with necessary screwsSqm2,136.80
8.19.3Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screwsSqm2,067.90
8.20.1Extra for Providing and fixing flush doors with decorative veneeringOn one side in item no. 8.19Sqm546.60
8.21Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.18 and 8.19Sqm527.50
8.22.1Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured)Rectangular or squareSqm228.60
8.22.2Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured)CircularSqm237.40
8.23Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured)Sqm466.00
8.24Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured)Sqm123.10
8.25.1Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4 mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/and black enamelled M.S. butt hinges with necessary screwsGamair WoodSqm3,303.70
8.25.2Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4 mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/and black enamelled M.S. butt hinges with necessary screwsLocal Teak WoodSqm3,070.10
8.26.1Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked stainless steel butt hinges with necessary screwsGamair WoodSqm3,497.10
8.26.2Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked stainless steel butt hinges with necessary screwsLocal Teak WoodSqm3,263.50
8.27.1Providing and fixing 30mm thick wire gauge shutters using galvanised M.S. wire gauge of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked Stainless Steel butt hinges with necessary screwsGamair WoodSqm3,066.40
8.27.2Providing and fixing 30mm thick wire gauge shutters using galvanised M.S. wire gauge of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked Stainless Steel butt hinges with necessary screwsLocal Teak WoodSqm2,866.40
8.28.1Providing and fixing 30mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia 0.63 mm for doors, windows and clerestory windows including ISl marked bright finished or /and black enamelled M.S. butt hinges with necessary screwsGamair WoodSqm2,948.90
8.28.2Providing and fixing 30mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia 0.63 mm for doors, windows and clerestory windows including ISl marked bright finished or /and black enamelled M.S. butt hinges with necessary screwsLocal Teak WoodSqm2,748.90
8.29.1Providing and fixing wire gauze laminated veneer lumber shutters conforming to IS: 14616, and as per TADS 15:2001 (Part B) using galvanised wire gauze with average width of aperture 1.4mm in both directions with wire of dia 0.63mm as per IS: 1568 for doors, windows and clerestory windows including ISI marked bright finished or/and black enemelled M.S. butt hinges with necessary screws as per directions of Engineer-in-charge35 mm thick shuttersSqm3,055.80
8.29.2Providing and fixing wire gauze laminated veneer lumber shutters conforming to IS: 14616, and as per TADS 15:2001 (Part B) using galvanised wire gauze with average width of aperture 1.4mm in both directions with wire of dia 0.63mm as per IS: 1568 for doors, windows and clerestory windows including ISI marked bright finished or/and black enemelled M.S. butt hinges with necessary screws as per directions of Engineer-in-charge30 mm thick shuttersSqm2,739.50
8.30Providing 50 × 50 × 50 mm Gamair wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) and making good the walls etcNos26.00
8.31.2Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work/CC/R.C.C. and making good etc. complete32 mm longNos30.20
8.31.3Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work/CC/R.C.C. and making good etc. complete40 mm longNos34.60
8.31.4Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work/CC/R.C.C. and making good etc. complete50 mm longNos42.00
8.32.1Providing and fixing Gamair Wood plain lining tongued and grooved on and including wooden plugs complete with necessary screws and priming coat on unexposed surface40 mm thickSqm4,328.70
8.32.2Providing and fixing Gamair Wood plain lining tongued and grooved on and including wooden plugs complete with necessary screws and priming coat on unexposed surface25 mm thickSqm2,871.50
8.32.3Providing and fixing Gamair Wood plain lining tongued and grooved on and including wooden plugs complete with necessary screws and priming coat on unexposed surface20 mm thickSqm2,285.90
8.32.4Providing and fixing Gamair Wood plain lining tongued and grooved on and including wooden plugs complete with necessary screws and priming coat on unexposed surface12 mm thickSqm1,553.10
8.33.1Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood prelaminated one side decorative lamination on other side balancing lamination Grade I,Type II, IS: 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete12 mm thickSqm1,372.50
8.33.2Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood prelaminated one side decorative lamination on other side balancing lamination Grade I,Type II, IS: 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete18 mm thickSqm1,499.90
8.33.3Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood prelaminated one side decorative lamination on other side balancing lamination Grade I,Type II, IS: 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete25 mm thickSqm2,109.50
8.34.1Providing and fixing specified wood frame work consisting of battens 50 × 25 mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat completeGamair WoodCum1,51,740.20
8.35.1Providing and fixing decorative plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface withDecorative veneer facings of approved manufactureSqm1,455.60
8.36Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842 Plain lining with necessary screws, priming coat on unexposed surface etc., completeSqm1,189.10
8.37.1Providing and fixing skirting of prelaminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS: 12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete18 mm thickSqm1,719.40
8.37.2Providing and fixing skirting of prelaminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS: 12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete25 mm thickSqm2,328.90
8.38.1Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. completeGamair Wood 50×12 mmMetre142.00
8.38.1Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. completeGamair Wood 50 × 20 mmMetre177.60
8.38.2Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. completeLocal Teak Wood 50 × 12 mmMetre135.50
8.38.2Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. completeLocal Teak Wood 50×20 mmMetre166.80
8.39.1Providing and fixing plain jaffri of 35 × 10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50 × 12 mm beading complete withGamair WoodSqm1,892.80
8.40Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS: 3087 marked including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25 × 3 mm M.S. flat 10 cm long and rawl plugs 50 mm long (designation 10 no.) etc. all completeMetre517.20
8.41Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842 - 2000, including top cover of 6 mm coir veneer board, nickel plated M.S. Pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25 × 3 mm M.S. flat 10 cm long and rawl plugs 50 mm long (designation 10 no.) etc. all completeMetre656.50
8.42Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. Non decorative veneer on both sidesMetre47.60
8.44.1Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete12 mm diaMetre369.10
8.44.2Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete20 mm diaMetre501.00
8.44.3Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete25 mm diaMetre641.70
8.45.1Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets20 mm dia (heavy type)Metre129.20
8.45.2Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets25 mm dia (heavy type)Metre149.70
8.46.1Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all completeFixed to steel windows by weldingKG161.50
8.46.2Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all completeFixed to openings /wooden frames with rawl plugs screws etcKG169.70
8.47Providing and fixing expanded metal 20 x 60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x 19 mm beading of Gamair woodSqm1,093.10
8.48Providing and fixing hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62 x 19 mm beading of Gamair woodSqm1,403.20
8.50Deduct for fixing 75 × 25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thickSqm187.60
8.51Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement: 3 fine sand: 6 graded stone aggregate 20mm nominal size)Nos190.10
8.52.1Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete withSal woodCum1,22,006.10
8.52.2Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete withLocal Teak WoodCum96,742.10
8.52.3Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete withGamair WoodCum89,865.50
8.53.1Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete125 × 65 × 2.12 mmNos49.50
8.53.2Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete100 × 58 × 1.90 mmNos37.60
8.53.3Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete75 × 47 × 1.70 mmNos29.80
8.53.4Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete50 × 37 × 1.50 mmNos16.70
8.54.1Providing and fixing IS: 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete125 × 90 × 4.00 mmNos66.60
8.54.2Providing and fixing IS: 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete100 × 75 × 3.50 mmNos55.40
8.54.3Providing and fixing IS: 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete75 × 60 × 3.10 mmNos213.40
8.54.4Providing and fixing IS: 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete50 × 40 × 2.50 mmNos23.90
8.55.1Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete125 × 65 × 2.12 mmNos47.80
8.55.2Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete100 × 58 × 1.90 mmNos39.70
8.55.3Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete75 × 47 × 1.70 mmNos31.50
8.55.4Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete50 × 37 × 1.50 mmNos17.50
8.56.1Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete150 × 125 × 27 × 2.80 mmNos85.50
8.56.2Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete125 × 125 × 27 × 2.80 mmNos79.30
8.56.3Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete100 × 125 × 27 × 2.80 mmNos67.90
8.56.4Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete75 × 100 × 20 × 2.24 mmNos58.10
8.57.1Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete150 mmNos296.20
8.57.2Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete125 mmNos261.00
8.57.3Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete100 mmNos212.90
8.58.1Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete150 mmNos331.40
8.58.2Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete125 mmNos296.20
8.58.3Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete100 mmNos259.00
8.59.1Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., completeOverall width 35 mmMetre236.50
8.59.2Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., completeOverall width 50 mmMetre236.60
8.59.3Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., completeOverall width 65 mmMetre257.30
8.60.1Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc. complete300×16 mmNos220.90
8.60.2Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc. complete250 x 16 mmNos201.60
8.61.1Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete250x10 mmNos90.00
8.61.2Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete200 x 10 mmNos73.80
8.61.3Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete150 x 10 mmNos62.00
8.61.4Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete100 x 10 mmNos45.80
8.62Providing and fixing ISI marked 85 x 42 mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. completeNos120.00
8.63.1Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete300 x 20 x 6 mmNos100.50
8.63.2Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete250 x 20 x 6 mmNos82.90
8.64.1Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete125 mmNos41.90
8.64.2Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete100 mmNos33.10
8.64.3Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete75 mmNos27.20
8.65.1Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS: 363 with necessary screws etc. complete150 mmNos33.20
8.65.3Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS: 363 with necessary screws etc. complete90 mmNos23.90
8.66.2Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete250 mm weighing not less than 150 gmsNos59.30
8.66.3Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete200 mm weighing not less than 120 gmsNos50.50
8.67Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.)Nos107.50
8.68.1Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc. complete125 x 64 x 1.90 mmNos111.60
8.68.2Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc. complete100 X 58 X 1.90 mmNos99.30
8.68.4Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc. complete50 x 37 x 1.50 mmNos42.50
8.69.1Providing and fixing IS: 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete125 x 64 x 2.50 mmNos123.00
8.69.2Providing and fixing IS: 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete100 x 60 x 2.50 mmNos98.40
8.69.3Providing and fixing IS: 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete75 x 50 x 2.50 mmNos79.60
8.70.1Providing and fixing bright finished brass butt hinges with necessaryscrews etc.complete125 x 85 x 5.5 mm (heavy type)Nos251.70
8.70.2Providing and fixing bright finished brass butt hinges with necessaryscrews etc.complete125 x 70 x 4 mm (ordinary type)Nos185.50
8.70.3Providing and fixing bright finished brass butt hinges with necessaryscrews etc.complete100 x 85 x 5.5 mm (heavy type)Nos208.20
8.70.4Providing and fixing bright finished brass butt hinges with necessaryscrews etc.complete100 x 70 x 4 mm (ordinary type)Nos145.50
8.70.5Providing and fixing bright finished brass butt hinges with necessaryscrews etc.complete75 x 65 x4 mm (heavy type)Nos172.30
8.70.6Providing and fixing bright finished brass butt hinges with necessaryscrews etc.complete75 x 40 x 2.5 mm (ordinary type)Nos95.00
8.70.7Providing and fixing bright finished brass butt hinges with necessaryscrews etc.complete50 x 40 x 2.5 mm (ordinary type)Nos38.80
8.71.1Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete150 x 125 x 27 x 5 mmNos482.30
8.71.2Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete125 x 125 x 27 x 5 mmNos430.00
8.71.3Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete100 x 125 x 27 x 5 mm 75 x 100 x 20 x 3.2 mmNos394.70
8.72.1Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete250 x 10 mmNos465.90
8.72.2Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete200x10 mmNos373.00
8.72.3Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete150x10 mmNos286.60
8.72.4Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete100x10 mmNos195.20
8.73.1Providing and fixing bright finished brass door latch with necessary screws etc. complete300x16x5 mmNos336.90
8.73.2Providing and fixing bright finished brass door latch with necessary screws etc. complete250x16x5 mmNos319.40
8.74Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality)Nos830.90
8.75Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality)Nos650.70
8.76Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality)Nos1,200.20
8.77.1Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers including necessary screws etc. complete (best make of approved quality)40 mm 50 mmNos243.30
8.77.4Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers including necessary screws etc. complete (best make of approved quality)75 mmNos306.30
8.78Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality)Nos73.50
8.79.1Providing and fixing bright finished brass handles with screws etc. complete125 mmNos254.80
8.79.2Providing and fixing bright finished brass handles with screws etc. complete100 mmNos235.70
8.79.3Providing and fixing bright finished brass handles with screws etc. complete75 mmNos184.40
8.80Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. completeNos134.70
8.81Providing and fixing IS: 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. completeNos1,243.40
8.82Providing and fixing IS: 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. completeNos1,327.00
8.83.6Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete75x63x4 mmNos84.20
8.84.1Providing and fixing bright finished brasscasement stays (straight peg type) with necessary screws etc. complete300 mm weighing not less than 330 gmsNos238.60
8.84.2Providing and fixing bright finished brasscasement stays (straight peg type) with necessary screws etc. complete250 mm weighing not less than 280 gmsNos190.40
8.84.3Providing and fixing bright finished brasscasement stays (straight peg type) with necessary screws etc. complete200 mm weighing not less than 240 gmsNos181.60
8.85.1Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete150 mmNos150.20
8.85.2Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete115 mmNos135.50
8.85.3Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete90 mmNos118.80
8.86Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality)Nos954.00
8.87Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality)Nos1,006.70
8.88.1Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) ofSize 40 mmNos234.50
8.88.2Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) ofSize 50 mmNos252.10
8.88.3Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) ofSize 65 mmNos290.20
8.88.4Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) ofSize 75 mmNos334.20
8.89Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts completeNos151.20
8.90.1Providing and fixing chromium plated brass handles with necessary screws etc. complete125 mmNos292.90
8.90.2Providing and fixing chromium plated brass handles with necessary screws etc. complete100 mmNos257.70
8.90.3Providing and fixing chromium plated brass handles with necessary screws etc. complete75 mmNos231.30
8.91Providing and fixing chromium plated brass casement window fastener with necessary screws etc. completeNos177.90
8.92.1Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete300 mm weighing not less than 330 gmsNos265.80
8.92.2Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete250 mm weighing not less than 280 gmsNos230.60
8.92.3Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete200 mm weighing not less than 240 gmsNos195.50
8.93.1Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete125x75x4 mmNos156.50
8.93.2Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete125x63x4 mm 100x75x4 mmNos129.50
8.93.5Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete100x63x3.2 mmNos98.20
8.93.7Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete75x63x3.2 mmNos76.30
8.93.8Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete75x45x3.2 mmNos71.40
8.94.1Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete300x16 mmNos287.00
8.94.2Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete250x16 mmNos256.30
8.95.1Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete300x10 mmNos135.20
8.95.2Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete250x10 mmNos119.30
8.95.3Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete200x10 mmNos103.40
8.95.4Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete150x10 mmNos87.30
8.95.5Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete100x10 mmNos66.60
8.96Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws bolts, nuts and washers etc. completeNos100.90
8.97Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. completeNos248.80
8.98.1Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete125 mmNos68.80
8.98.2Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete100 mmNos60.90
8.98.3Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete75 mmNos51.60
8.99.1Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. completeSingle rubber stopperNos45.00
8.99.2Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. completeTwin rubber stopperNos74.30
8.100Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. completeNos60.30
8.101Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality)Nos943.70
8.102Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rodMetre165.60
8.103Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ role form G.I. sheet with zinc coating of grade 175 consisting of floor and ceilling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick fixed to the floor and ceilling at the spacing of 610 mm centre to centre with dash fastener of 12.50 mm dia-mater, 40 mm length and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceilling channel and placed at a spacing of 610 mm centre to centreb by 6 mm dia bolts and nuts at both ends of partition fixed flush to wall with rawl plugs at spacing 450 mm centre to centre and fixing of boards to either side of frame work by 25 mm drive all screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre, including jointing and finishing to a flush finish with recommended joiunting compound, jointing tape, joint finisher and two coats of primer siutable for boards as per manufacture's specification and direction of the Engineer-In-Charge all complete. 67mm overall thickness partition with 8.5 mm thick double skin Glass reinforced Gypsum (GRG) board conforming to IS: 2095: part III 75mm overall thickness partition with 12.5mm thick double skin plain Gypsum board conforming to IS: 2095: part I 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure. Non Combustible & spred of flames (as per BS standard 476 part IV & VII), Water, Termite & Fungus Resistant, Compressive strength 225 Kg/Sq.cm, Bending strength 100 Kg/Sq.cm. 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862, non combustible, non ignitable,fire propagation index and surface spread of flame (as per BS 476 part IV, V, VI & VII), moisture, Termite & Fungus Resistant, with suitable fibre cement screwSqm1,784.00
8.104Providing and fixing PTMT handles with necessary screws etc. complete. 125x34x24 mm weighing not less than 23 gms. 150x34x24 mm weighing not less than 26 gms. Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 75x60x10 mm fitted with 5.5 mm dia M.S.Bright Bar Rod weighing not less than 34 gms. 100x75x10 mm fitted with 5.5 mm dia MSBright Bar Rod weighing not less than 53gms. Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 152x42x18 mm weighing not less than 60 gms. 202x42x18 mm weighing not less than 78 gmsNos42.20
8.107Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gmsNos41.80
8.108Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete Gamair wood. 50x50 mm (base and height)Metre228.00
8.109Providing and fixing gamair wood lipping/ moulded beading or Taj beading of size 18X5mm fixed with wooden adhesive like fevicol etc and screws/ nails on the edges of the prelaminated particle board as per direction of Engineer-in-chargeMetre56.60
8.110Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-chargeNos856.60
8.111Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality.) Triple strip vertical type. Double strip (horizontal type)Nos49.80
8.112Providing and fixing powder coated telescopic drawer channels 300mm long with necessary screws etc. complete as per directions of Engineer-in-chargeSet422.00
8.113Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)Nos19.10
8.114Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension, as below (tolerance +/- 1mm) with wall thickness 2.0mm+/- 02mm. corners of the door frame to be jointed with galvanized brackets and stainless screws, joint mitred and plastic wilded. The hinge side vertical of the frames reinforced by galvanized MS tube of size 19 × 19 mm and 1 mm +/- 0.1 mm wall thickness and 3 nos stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-Charge. Extruded section Profile size 48x40 mm. Extruded section Profile size 42x50 mmMetre266.90
8.115Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised /plastic brackets of size 75×220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserying galvanised MS tube of size 20×20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of "H" Section, a UPVC hollow section of size 100×24 mm and 2 mm ± 0.2 mm wall thickness fixed to the shutter styles by means of plastic /galvanised MS "U" cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm ± 0.1 mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontaly 6 mm galvanised MS rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-In-Charge. (for W.C. and Bathroom door shutter). 30mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC profile section of size 30mm x 60mm and wall thickness 2mm ± 0.2mm with inbuilt decorative moulding edging on one side. The styles and rails with plastic brackets of size 75×220 mm mitred and welded at the corners. The styles of the shutter reinforced by inserting galvanised MS tube of size 25×20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of "H" Section, a UPVC profile section of size 30×100 mm and 2 mm ± 0.2 mm wall thickness welded to the shutter style with a UPVC profile section single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm ± 0.1 mm wall thickness with 20 mm panel beading of suitable size/Glass (4 mm thick plain glass)/ louver section, louver frame of suitable size, complete as per manufacturer's specification and direction of Engineer- In-Charge. (for W.C. and Bathroom door shutter). 25mm thick PVC flush door shutters upto 737mm width of colour and shade as approved by Engineer-in-charge made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1 mm ± 0.3 mm. PVC foam end cap of size 23 × 10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. An MS tube having dimensions 19mm × 19 mm is insetred along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25×11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturers' specification and drawing to take up necessary hardware and fixtures complete. Stickers indicating the locations of hardware will be pasted at appropriate placesSqm2,123.80
8.116Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19×19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall usuing MS screws of 65/100 mm size complete as per manufacturers' specification and direction of Engineer-In-ChargeMetre495.50
8.117Providing and fixing to existing door frames. 30mm thick factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top & bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of size 30mm thickness, 110mm width out of which 90mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 110mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 130mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in- charge, manufacture’s specification & drawing. 30mm thick factory made solid both side prelam panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles, top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded prelam PVC ‘C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, button and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5mm thick both side Prelam PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. manufacturer’s specification & drawingSqm2,994.40
8.118Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness.The laminate shall be molded with fire resistant grade unsaturated polyester resin and chopped mat.Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stay shall be provided at the bottom to steady the frameMetre882.30
8.119Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS: 14856 - 2000 including fixing to frames. 30mm thick fibreglass reinforced plastice (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856: 2000, complete as per direction of Engineer-in-chargeSqm4,363.00
8.120Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screwsMetre592.20
8.121Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners.The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter)Sqm3,658.20
8.122Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesiveSqm890.30
8.123Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. Marine plywood conforming to IS: 710 Fire retardant plywood conforming to IS: 5509Sqm2,461.40
8.124Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality. 1.5 mm thick. 1.0 mm thickSqm867.30
8.125Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2nos. vertically and 1nos. horizontally 50x2mm thick M.S. flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings. The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlightSqm5,275.10
8.126Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-ChargeSqm2,278.80
8.127Providing and fixing cup board shutters with 25mm thick veneered particle board IS: 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in-Charge. With decorative veneering on one side and commercial veering on other side. With non decorative veneering on both sidesSqm2,013.60
8.128Providing and fixing factory made Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade I Type II, of approved design, and edges sealed with water resistant paint and lipped with aluminium 'U' type edge beading all-round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of 'U' beading and hinges will be paid for separately). 25 mm thickSqm1,698.10
8.129Providing and fixing aluminum U beading of required size to prelaminated /flush door shutter including fixing etc. complete as per direction of Engineer-in- chargeKG548.30
8.130Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm placed @ 610mm C/C in perimeter channel having one flange of 20mm and another flange of 30mm with thickness of 0.55mm and web of length 27mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610mm C/C with fully threaded self- tapping drywall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing & directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. Tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/sq.cm, Bending strength 100 Kg/Sq.cm. 10mm thick. Non -asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (high pressure steam cured ) as per IS 14862 non combustible, non ignitable, fire propagation index and surface spread of flame (as per BS 476 part IV,V,VI and VII) moisture, termite & fungus resistant with suitable fibre cement screw. 8 mm thick. Gypsum board conforming to IS: 2095- 1996: Part - I 12.5 mm thickSqm1,499.00
8.131Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately). Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick conforming to IS:14587 Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick conforming to IS:14587Sqm944.40
8.132Providing and fixing Pre-laminated medium density fibre board conforming to IS: 14587:1998 marked, with one side decorative lamination and other side balancing lamination Grade-I(exterior grade), in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 18 mm thick 25 mm thickSqm1,424.28
8.133Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated with one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. all complete. 12 mm thick. 18 mm thick. 25 mm thickSqm1,003.20
8.134Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade ( Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination, for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand, including ISI marked nickel plated bright finishing M.S. piano hinges Conforming to IS:3818 with necessary screw etc. all completeSqm1,994.50
8.136Providing and fixing in position Phenol bonded Bamboowood panelled or panelled and glazed shutter for door,windows clerestory windows with pre - molded 30 mm thick planks in approved colours texture & finish.It shall have 10 mm wide 25 mm deep grove to fit in panels the bamboo wood shall have minimum density of 1000 Kg /cum minimum hardness 1000 Kgf.All styles and rails shall have profiled interlocking system locked in place by bamboo pins all complete as per direction of Engineer in charge (the panelling will be paid for separately )Sqm6,827.30
8.137Providing and fixing in position Phenol bonded Bamboowood panelling of 10 mm thick in 25 to 40 mm thick panelled or panelled and glazed shutter for door,windows clerestory windows in approved colours texture and finish. The bamboo wood planks shall have minimum density of 1000 Kg /cum minimum hardness 1000 Kgf. The panels shall have profiled interlocking system locked in place with bamboo pins all complete as per direction of Engineer in charge (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured)Sqm4,284.40
8.138Providing and fixing in position 65 mm thick factory made door frame of phenol bonded Bamboowood (superior class interior use) in approved colours,texture & finish.The bamboo wood shall have minimum density of 1000 Kg /cum, minimum hardness 1000 Kgf.The door frame shall have tenon & mortise interlocking system,to be fixed to the wall with 100 mm size GI Screws all a complete as per direction of Engineer in chargeCum3,15,042.70
8.139Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all completeSqm3,116.10
8.140Providing and fixing in position wall panelling at all heights with 6 mm thick BWP ply board lapping with 4 mm thick Teak Veneer of approved quality in outer face, decorative teak wood bead (50 x 40 ) at top and skirting (150 x 25), comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally ply board are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm all complete as per manufacturer's specification as per direction of Engineer-in-Charge all completeSqm4,637.50
8.141Providing and Fixing Channeled Hi Density Fiber Board Wall Panel (woodworks) (WC01C28LUMW) perforated panels of width 128mm, thickness of 15mm and length 2440mm with minimum 830 kg/M³ density substrate with a laminated facing as per the approved shade/species & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 4mm width and 28 mm visible panel each. The panels shall provide a fire reaction of Class of 1 as per Part 7 of BS 476. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.55. The panels shall be mounted on special aluminium splines using clips. Install wooden battens of section 50 mm x 50 mm or approved by the Architect on the solid wall horizontally using screws and plugs at spacing of 600 mm centre-to-centre. Screw the aluminium-extruded keel for channeled wood works (GTPT001) over the lowest and second wooden batten at an on-centre distance of 600 mm. Install the first set of wooden panels by inserting the clips for border channeled woodworks (GTPT002) and insert the grove of the panel into the projecting flange of the aluminium clip. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing clips for inside channeled woodworks (GTPT003) into the next keel till the actual height is achieved. Use clips for borer channeled woodworks (GTPT002) to finish off the installation. Finish off the edges using wooden moulding of matching colour approved by the Architect, suitably fixed all complete as per drawings and specification and direction of the Engineer-in-ChargeSqm4,660.80
8.142Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with one coat of primer: Treated (as per IS 401) rubber Wood (Performance Appraisal Certificate (PAC) issued by TFDPC Ltd)Cum1,09,637.00
8.143Providing TFDPC Primered High Density Fibre (HDF) based skin door shutters having uniform distribution of PRIMER sprayed by program logic controlled Spray Conveyor Guns to ensure a blemish free uniform polish filled with treated (as per IS 401) rubber wood (Performance Appraisal Certificate (PAC) issued by TFDPC Ltd) including fittings & fixing. 35 mm thick shuttersSqm2,842.00
8.145Providing TFDPC Veneered Moulded High Density Fibre (HDF) based skin door shutters filled with treated(as per IS 401) rubber wood (Performance Appraisal Certificate (PAC) issued by TFDPC Ltd) having varnish of approved colour,texture & finish to ensure a uniform bright polish including fittings & fixing. 35 mm thick shuttersSqm4,964.00
8.146Providing panelled or panelled and glazed shutter for door,windows clerestory windows with 35mm thick Finger jointed edge glued solid treated(as per IS 401) rubber wood (Performance Appraisal Certificate (PAC) issued by TFDPC Ltd) board in approved colours texture & finish including fittings & fixing. 35 mm thick shuttersSqm9,568.00
8.147Providing & fixing in position treated(as per IS 401) rubber wood in wall skirting with finger jointed edge glued solid rubber wood board planks of sizes 12 mm thick, 1900mm length (minimum) and 75mm wide(minimum), in approved colour, texture and finish. The skirting shall be fixed with SS screws & rawl plugs, over underlayment of 25mm x 50mm cross section treated rubber wood structure and (Performance Appraisal Certificate (PAC) issued by TFDPC Ltd). all complete as per direction of the Engineer in-chargeSqm4,928.00
8.148Providing & fixing in position treated (as per IS 401) rubber wood wall cladding at all height with finger jointed edge glued solid rubber wood board planks of sizes 12 mm thick, 1000mm length (minimum) and 100 mm wide (minimum), in approved colour, texture and finish, with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of treated rubber wood of size 50mmx25mm placed at 500mm (maximum) apart and Performance Appraisal Certificate (PAC) issued by TFDPC Ltd) All complete as per direction of the Engineer in-chargeSqm4,928.00
8.149Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet (Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³. The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter. The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge. (Cost of SS ball bearing hinges is excluded)Metre1,904.40
8.150Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately)Sqm10,352.40
8.151Providing and fixing non load bearing fixed frame for fire resistant glazed Partition for 120 min Fire Rating, made out to a profile of dimension 60mm x 70 mm of 1.6 mm thick galvanised steel sheet as per test evidence suitable for fixing fire rated glass for 120 min of both integrity & radiation control (EW120) & minimum 15 min of insulation (EI15).The profile has to be fixed to the supporting construction by means of anchor fasteners of size M10 x 80, every 150 mm from the edges and every 500 mm (approx) c/c. Linear meaurement of frame shall be measured for payment. The frame shall be filled with mineral wool insulation of density min 96kg/m³. and finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- chargeMetre1,904.40
8.152Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c, including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per direction of Engineer- in-charge. The glass should be clear, toughened, interlayered, non-wired fire resistant having 11 mm thickness CFDL of approved brand with 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 15 min of insulation (EI15) and having a sound reduction of ≥37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category of Impact Resistance as per EN 12600. The glass should be manufactured in UL & TUV audited Facility and including UL-EU Certification.The maximum glazing size cannot be more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report for the complete system (Glazed Door or Partition) will be considered valid only if it contains the stamp and signature of the authorized signatory from the glass manufacturer. (Actual glass size is to be measured at site for payments)Sqm42,527.80
8.153Supply & fixing of SS Ball Bearing Hinges of size 100 x 75 x 3mm complete with SS Screws of BB1953 Becker Fire Solution / 3090F DORMA / 8011008 GEZE Make ( 5 Nos. per panel ) (Required For All Doors) as per the directions of Engineer-in-chargeEach705.10
8.154Supply & fixing of Slim body Mortise Sash Lock With SS Lever Handle Of Becker Fire Solution / DORMA 952 Series / GEZE Make (Required For Service Room Location Such As AHU, Electrical Rooms Etc.)as per direction of Engineer in ChargeEach21,002.70
8.155Supply & fixing of door closers of BLC-0408 Becker Fire Solution/ TS-83 DORMA / TS2000 GEZE Make. (Required For All Fire Doors Except Shaft Door)as per direction of Engineer in ChargeEach10,320.20
8.156Supply & fixing of Stainless Steel 304 grade 300mm Long Tower Bolt of BFBS1930 Becker Fire Solution / 9114306 DORMA/ 8157007 GEZE Make with necessary screws as required in Double Leaf Doors OnlyEach2,226.70
8.157Providing and fixing in position wall panelling at all heights with 12.5 mm thick Perforated Gypsum Board panels/tiles made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595 x 595mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with centre borders of 48 mm and the side borders of 30 mm, having NRC (Noise Reduction coefficient) of 0.65 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Resin bonded Glasswool of 24kg/m³ and 50mm thickness is then to be inserted in the slots and finally Gypsum Board non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing compound and fiber joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all completeSqm2,018.10
8.158Providing and Fixing factory made uPVC door/,window frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-chargeMetre625.70
8.159Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( Area of window upto 2.50 sqm). Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big eries)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of bigseries)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm). Casement cum fixed panel window having both end single casement panel,middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm, sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),, uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm) Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm upto 2.50 sqm). Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm.) Two track four panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi- chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated)handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) Two track four panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto 10.00 sqm). Three track three panels sliding door made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)Sqm10,481.20
8.161Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. completeEach210.50
8.162Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. completeEach187.20
8.163Providing and fixing steel roller for uPVC sliding window with necessary screws etc. completeEach103.20
8.164Providing and fixing steel roller for uPVC sliding door with necessary screws etc. completeEach173.00
8.165Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. completeEach181.50
8.167Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587Sqm1,535.30
8.168Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately). Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick confirming to IS:14587Sqm944.10
8.169Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick confirming to IS:14587 Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 25 mm thick confirming to IS:14587Sqm1,347.00
8.171Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade ( Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc all completeSqm2,008.50
8.173Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 sqm c/c, including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in- Charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/ certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100 x 2200 mm (w x h) or 2.42 sqmSqm46,163.40
8.174Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm 100 mm 75 mmEach113.10
8.175Providing and fixing 18mm thick both sides Pre- laminated cement bonded wood particle board as per IS: 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). 18 mm thickSqm1,277.90
8.176Providing and fixing 6mm thick both sides Pre- laminated cement bonded wood particle board as per IS: 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-inchargeSqm923.20
8.177Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)Sqm2,795.50
8.178Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-chargeSqm2,576.00
8.179Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mmEach173.90
8.182Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately)KG464.70
8.183Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in- chargeMetre41.40
8.184Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastner with necesary stainless steel screws, all complete as per direction of Engineer- inchargeMetre420.20
8.185Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-chargeSqm4,828.30
8.186Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete Bandhani Blacksmith 1st class Blacksmith 2nd class Beldar Fitter (grade 1) Mason (brick layer) 1st class Mason (brick layer) 2nd class Belder skilled Glazier Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Pulley 25 mm dia Rolling shutter made of 80x1.25 mm machine rolled laths Top cover for rolling shutters 1.25 mm thick 275 mm long wire spring grade no 2 for rolling shutters Ball bearing for rolling shutters Extra for mechanical devices chain and cranked operation for operating rolling shutters: exceeding 10.00 sq.m and up to 16.80 sq.m area of door Extra for mechanical devices chain and cranked operation for operating rolling shutters: exceeding 16.80 sq.m area of door Mild steel round bar 12 mm dia and below Mild steel round bar above 12 mm dia Structural steel such as tees, angles channels and R.S. joists Flats up to 10 mm in thickness Flats exceeding 10 mm in thickness Mild steel plates Mild steel sheets for tanks Mild steel hooks Mild steel rivets Bolts and nuts up to 300 mm in length Bolts and nuts above 300 mm in length Iron pintels including welded pin Welding by gas plant in/c wages for welder Welding by electric plant in/c wages for welder 20 mm dia holding down bolts Mild steel sheets with bolts and nuts to rest on pintels G.I. pipes 40 mm dia Mild steel tubes hot finished welded type Mild steel tubes hot finished seamless type Mild steel tubes electric resistant or induction butt welded Circular C.I. Box for ceiling fan Pulley 40 mm dia Rolling shutters made of 80x0.90 mm machine rolled laths Rolling shutters made of 80x1.2 mm machine rolled laths Top cover of Rolling shutters 0.90 mm thick Top cover of Rolling shutters 1.20 mm thick Extra for providing grilled rolling shutters with 8 mm dia M.S. rod instead of laths Carbon Steel galvanised dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10mm x 60mm Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10mm x 80mm Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10mm x 120mm Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10mm x 140mm Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10mm x 160mm Stainless steel (Grade-304) hollow section round/square tubes Stainless steel bolts/square bar and plates Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. of wire 0.63 mm Stainless steel wire guage (Grade-304) aperture 1.4mm and 0.50 mm dia wire Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). Float glass sheet of nominal thickness 5.5 mm.(weight not less than 13.50 kg/sqm Steel beading size 10 x 10 x 1.6 mm (box type) Structural hollow steel section conforming to IS: 4923, Grade: Yst 310 or Circular Section conforming to IS: 1161, Grade: Yst 310 Structural steel section confirming to IS 2062 - 1999 grade B Fe 410, normalized control cooled, yield strength + 250 MPa as per latest IS Code High strength friction grip bolts (HSFG bolts ) of class / grade EN 8 Carriage: Steel Carriage: G.I. pipes below 100 mm diaEach127.40

Other chapters in this schedule

Pricing wood & pvc work against a live tender

Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works