Tripura SOR 2023
Cladding Work rates
38 cladding work items from the Tripura PWD (R&B and Buildings), effective 2023-04-01.
Cladding Work rates in the Tripura Building Schedule of Rates 2023 run from ₹28.30 to ₹1,23,088.00. Transcribed from Tripura PWD — SoR 2023: Building Works, basic rates as on or just before 01.04.2023. Reference only — verify against the official source before pricing a bid.
/
38 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 7.3.1 | Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-charge18 mm Marble work | Metre | 210.10 |
| 7.3.2 | Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-charge14 mm Marble work | Metre | 147.10 |
| 7.3.3 | Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-charge18 mm thick Granite work | Metre | 361.20 |
| 7.3.4 | Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-charge14 mm thick Granite work | Metre | 300.40 |
| 7.4 | Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. at all levels as required | Metre | 421.10 |
| 7.5 | Mirror polishing on marble work/granite work /stone work wherever, required to give high gloss finish complete at all levels as required as per direction of the Engineer-in-Charge | Sqm | 298.30 |
| 7.6 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete | Each | 610.20 |
| 7.7.1 | Providing and fixing cramps of required size and shape in RCC/CC/ Brick masonry backing with cement mortar 1:2 ( 1 cement: 2 fine sand ) including drilling necessary holes in stones and embedding the cramp in the hole ( fastener to be paid separately ) complete at all levels as requiredGun metal cramps | KG | 707.10 |
| 7.7.2 | Providing and fixing cramps of required size and shape in RCC/CC/ Brick masonry backing with cement mortar 1:2 ( 1 cement: 2 fine sand ) including drilling necessary holes in stones and embedding the cramp in the hole ( fastener to be paid separately ) complete at all levels as requiredStainless steel cramps | KG | 679.80 |
| 7.8.1.1 | Wedge expansion typeFastener with threaded dia 6 mm | Each | 28.30 |
| 7.8.1.2 | Wedge expansion typeFastener with threaded dia 10 mm | Each | 31.80 |
| 7.8.1.3 | Wedge expansion typeFastener with threaded dia 12 mm | Each | 57.30 |
| 7.9.1.1 | Stone tile (polished) work for wall lining over 12mm thick bed of cement mortar 1:3 (1 cement: 3 fine sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete including rubbing, curing etc. complete at all levels as requiredRaj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble or equivalent duly aproved | Sqm | 2,452.00 |
| 7.9.1.2 | Stone tile (polished) work for wall lining over 12mm thick bed of cement mortar 1:3 (1 cement: 3 fine sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete including rubbing, curing etc. complete at all levels as requiredGranite of any colour and shade duly approved | Sqm | 3,169.90 |
| 7.10.1 | Providing and fixing stone slab with table rubbed, edges rounded and polished of size 75x50 cm deep and approved thickness fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 fine sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth including rubbing, curing etc. complete at all levels as required (measurement should be of exposed finished work)White Agaria Marble Stone of approved shade of 18 mm thick (75 x 50 cm) | Sqm | 3,593.20 |
| 7.10.2 | Providing and fixing stone slab with table rubbed, edges rounded and polished of size 75x50 cm deep and approved thickness fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 fine sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth including rubbing, curing etc. complete at all levels as required (measurement should be of exposed finished work)White Agaria Marble Stone of approved shade of 14 mm thick (75 x 50 cm) | Sqm | 3,279.30 |
| 7.10.3 | Providing and fixing stone slab with table rubbed, edges rounded and polished of size 75x50 cm deep and approved thickness fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 fine sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth including rubbing, curing etc. complete at all levels as required (measurement should be of exposed finished work)Granite of any colour and shade duly approved of 18 mm thick (75 x 50 cm) | Sqm | 4,103.10 |
| 7.10.4 | Providing and fixing stone slab with table rubbed, edges rounded and polished of size 75x50 cm deep and approved thickness fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 fine sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth including rubbing, curing etc. complete at all levels as required (measurement should be of exposed finished work)Granite of any colour and shade duly approved of 14 mm thick (75 x 50 cm) | Sqm | 3,455.10 |
| 7.11.1 | Providing and fixing machine cut, mirror/ eggshell polished, Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 fine sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc | Sqm | 10,869.50 |
| 7.12.1 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge18 mm thick stone slab | Sqm | 3,662.00 |
| 7.12.2 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge14 mm thick stone slab | Sqm | 3,228.90 |
| 7.13.1 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge18 mm thick stone slab | Sqm | 4,401.70 |
| 7.13.2 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge14 mm thick stone slab | Sqm | 3,473.50 |
| 7.14.1 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade: (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately)Red sand stone - exposed face fine dressed with rough backing. 70mm thick 60mm thick 50mm thick 40mm thick 30mm thick | Sqm | 4,109.80 |
| 7.14.2 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade: (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately)Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70mm thick 60mm thick 50mm thick 40mm thick 30mm thick | Sqm | 5,419.30 |
| 7.14.3 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade: (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately)White sand stone - exposed face fine dressed with rough backing. 70mm thick 60mm thick 50mm thick 40mm thick 30mm thick | Sqm | 6,368.30 |
| 7.14.4 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade: (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately)White sand stone - Exposed face machine cut and table rubbed with rough backing. 70mm thick 60mm thick 50mm thick 40mm thick 30mm thick | Sqm | 7,677.80 |
| 7.14.5 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade: (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately)Gang saw cut stone 30mm thick White sand stone 30mm thick Red sand stone | Sqm | 2,464.40 |
| 7.15 | Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement: 2 fine sand), including making the necessary chases in stone and holes in walls wherever required | KG | 849.80 |
| 7.16 | Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement: 2 fine sand), including making the necessary chases | Each | 48.70 |
| 7.17 | Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 fine sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge | Sqm | 2,861.80 |
| 7.18.1 | Stone work (machine cut edges in veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement: 3 fine sand) and jointed with Cement mortar 1:2 (1 cement: 2 stone dust), including grinding with hand grinder on joints rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately). Pre polished Kota stone slabs on exposed face25 mm thick | Sqm | 1,997.90 |
| 7.19 | Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof | Sqm | 148.60 |
| 7.20.1 | Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately)Red sand stone - 30mm thick gang saw cut stone | Sqm | 2,095.60 |
| 7.20.2 | Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately)White sand stone - 30mm thick gang saw cut stone | Sqm | 2,268.20 |
| 7.21 | Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement:2 fine sand:4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer-in- charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid) | KG | 216.70 |
| 7.22 | Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in- charge | Each | 349.10 |
| 7.23.1 | Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat completeKiln seasoned and chemically treated hollock wood Basic Rates 1st class 2nd class 1st class [Labour for installation of UPVC] 2nd class (brick layer) 1st class (brick layer) 2nd class (average) / labour for febrication of uPVC - Asbestos multi purpose fibre cement board 8mm thick. pressed 3 layer particle board (medium density) Grade I:12 mm for veneered particle board with: Teak veneering on one side and veneered on other side for veneered particle board with: Commercial veneering on both for veneered particle board with: Teak veneering on both sides butt hinges (light/ordinary type): 125x70x4 mm butt hinges (light/ordinary type): 100x70x4 mm butt hinges (light/ordinary type): 75x40x2.5 mm butt hinges (light/ordinary type): 50x40x2.5 mm butt hinges (heavy type): 125x85x5.5 mm(.70)kg butt hinges (heavy type): 100x85x5.5 mm(.56)kg butt hinges (heavy type):75x65x4.0 mm(.20)kg parliamentary hinges 150x125x27x5 mm parliamentary hinges 125x125x27x5 mm parliamentary hinges 100x125x27x5 mm parliamentary hinges75x100x20x3.2 mm tower bolt (barrel type) 250x10 mm tower bolt (barrel type) 200x10 mm tower bolt (barrel type) 150x10 mm tower bolt (barrel type) 100x10 mm handles 125 mm with plate 175x32 mm handles 100 mm with plate 150x32 mm handles75 mm with plate 125x32 mm door latch 300x16x5 mm (0.380 kg) door latch 250x16x5 mm (0.350 kg) mortice latch and lock 100x65 mm with6 levers and a pair of lever mortice latch 100x65mm with a pair of brass lever handles casement window fastener casement stays (straight peg type ) 300 mm weighing not less than kg casement stays (straight peg type ) 250 mm weighing not less than kg casement stays (straight peg type ) 200 mm weighing not less than kg hasps and staples (safety type) 300 mm hasps and staples (safety type) 115 mm hasps and staples (safety type)90 mm Night latch cupboard knob or ward robe knob 50 mm screws 50 mm screws 40 mm screws 30 mm screws 25 mm screws 20 mm plated Brass handles 125 mm with plate 175 x32 mm plated Brass handles 100 mm with plate 150 x 32 mm plated Brass handles 75mm with plate 125x32 mm plated Brass mortice latch and lock 100x65 mm with 6 levers a pair of brass lever handles plated brass casement window fastener plated Brass casement stays (straight peg type ) 300 mm not less than 0.33 kg plated Brass casement stays (straight peg type ) 250 mm not less than 0.28 kg plated Brass casement stays (straight peg type ) 200 mm not less than 0.24 kg plated Brass Night latch plated Brass Wardrobe Knob 50 mm plated Brass screws 50 mm plated Brass screws 40 mm plated Brass screws 30 mm plated Brass screws 25 mm plated Brass screws 20 mm plated Brass curtain rod 12 mm dia 1.25mm thick plated Brass curtain rod 20 mm dia 1.25mm thick plated Brass curtain rod 25 mm dia 1.25mm thick finished or black enameled mild steel butt hinges 125x65x2.12 finished or black enameled mild steel butt hinges 100x58x1.90 finished or black enameled mild steel butt hinges75x47x1.70 mm finished or black enameled mild steel butt hinges50x37x1.50 mm plated mild steel piano hinges 1 mm thick 35 mm wide finished or black enameled mild steel screws 50 mm finished or black enameled mild steel screws 40 mm finished or black enameled mild steel screws 30 mm finished or black enameled mild steel screws 25 mm finished or black enameled mild steel screws 20 mm finished or black enameled mild steel bolts and nuts 50x6 mm mild steel butt hinges 125x65x2.12 mm mild steel butt hinges 100x58x1.90 mm mild steel butt hinges75x47x1.70 mm mild steel butt hinges50x37x1.50 mm mild steel parliamentary hinges150x125x27x2.8 mm mild steel parliamentary hinges 125x125x27x2.8 mm mild steel parliamentary hinges 100x125x27x2.8 mm mild steel parliamentary hinges 75x100x20x2.24 mm mild steel single acting spring hinges 150 mm mild steel single acting spring hinges 125 mm mild steel single acting spring hinges 100 mm mild steel double acting spring hinges 150 mm mild steel double acting spring hinges 125 mm mild steel double acting spring hinges 100 mm plated mild steel piano hinges 1 mm thick 35 mm wide mild steel sliding door bolt 300x16 mm mild steel sliding door bolt 250x16 mm mild steel door latch 300x20x6 mm mild steel door latch 250x20x6 mm mild steel tower bolt (barrel type) 250x10 mm mild steel tower bolt (barrel type) 200x10 mm mild steel tower bolt (barrel type) 150x10 mm mild steel tower bolt (barrel type) 100x10 mm mild steel handles 125 mm mild steel handles 100 mm mild steel handles75 mm mild steel hasps and staples(safety type) 150 mm mild steel hasps and staples(safety type) 115 mm mild steel hasps and staples(safety type)90 mm mild steel screws 50 mm mild steel screws 40 mm mild steel screws 30 mm mild steel screws 25 mm mild steel screws 20 mm Aluminium butt hinges 125x75x4 mm Aluminium butt hinges 125x63x4 mm Aluminium butt hinges 100x75x4 mm Aluminium butt hinges 100x63x3.2 mm Aluminium butt hinges 100x63x4 mm Aluminium butt hinges 75x63x4 mm Aluminium butt hinges 75x63x3.2 mm Aluminium butt hinges 75x45x3.2 mm Aluminium sliding door bolt 300x16 mm Aluminium sliding door bolt 250x16 mm Aluminium tower bolt (barrel type)300x10 mm Aluminium tower bolt (barrel type)250x10 mm Aluminium tower bolt (barrel type)200x10 mm Aluminium tower bolt (barrel type)150x10 mm Aluminium tower bolt (barrel type)100x10 mm Aluminium handles 125 mm with plate 175 x 32 mm Aluminium handles 100 mm with plate 150 x 32 mm Aluminium handles 75mm with plate 125 x 32 mm Aluminium kicking plate 50 cm long100x3.15 mm board construction flush door with teak wood ply on both faces 35 thick board construction flush door with teak wood ply on both faces 30 thick board construction flush door with teak wood ply on both faces 25 thick board construction flush door with commercial ply on both faces mm thick board construction flush door with commercial ply on both faces mm thick board construction flush door with commercial ply on both faces mm thick sqm board construction flush door lipping sqm vision panel in Block board construction flush door Sqm vision panel in Block board construction flush door sqm type Louvers in Block board construction flush door sqm cutting in Block board construction flush door plywood 4 mm enamel paint in all shades except black or chocolate shade of Paris steel round bar above 12 mm dia up to 10 mm in thickness steel expanded metal 20x60 mm strands drawn steel wire fabric glass sheet of nominal thickness 8 mm (weight not less than steel bolts & nuts 6 mm dia and 25 mm long round head with wood scantling / plank plain washer for seam bolts glass sheet of nominal thickness 4 mm (weight not less than glass sheet of nominal thickness 5.5 mm.(weight not less than 13.50 wood 5 ply with commercial ply on both faces 6 mm thick mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm screws, bolts, nuts and washers complete cupboard lock 6 levers (best make of approved quality) 40 mm cupboard lock 6 levers (best make of approved quality) 50 mm cupboard lock 6 levers (best make of approved quality) 65 mm cupboard lock 6 levers (best make of approved quality) 75 mm hanging type door stopper 150 mm door closer bottle type M.S. body with necessary accessories screws complete Aluminium hanging type door stopper Aluminium pull bolt lock (locking bolt) of size 85 mmx42 mm screws, bolts,nuts and washers complete Aluminium Casement stay 250 mm Chromium Brass cupboard lock 40 mm size Chromium Brass cupboard lock 50 mm size Chromium Brass cupboard lock 65 mm size Chromium Brass cupboard lock 75 mm size wood 5 ply with teak ply on both faces 9 mm thick wood 5 ply with teak ply on one face and commercial ply on another 9 mm thick wood 7 ply with teak ply on one face and commercial ply on another 9 mm thick 100mm mortice latch and lock with6 levers without pair of handles of Anodised Aluminium lever handles for 100mm mortice latch and tape roll fastener/ Chemical fastener drive screws ( for gypsum board) ( for gypsum board) plated brackets ( curtain rods) wire mesh of average width of aperture 1.4 mm and nominal of wire 0.63 mm glass sheet of nominal thickness 4 mm (weighing not less than kg/sqm) plated M.S. pipe 20 mm dia. plated M.S. Brackets for curtain rod 20 mm plated M.S. Brackets for curtain rod 25 mm mild steel screws 35 mm steel conduit pipe (heavy type) ISI marked-20 mm dia. steel conduit pipe (heavy type) ISI marked-25 mm dia. wood lipping of size 25x3 mm in pelmets pressed 3 layer and graded particle board (medium density) Grade 1 to IS: 3087 - 18 mm thick tee channel (heavy duty) with rollers and stop end hanging floor door stopper with twin rubber & stopper door closer tubular type Aluminium section body M.S.casement stay (straight peg type) 300 mm not less than kg M.S.casement stay (straight peg type) 250 mm not less than kg M.S.casement stay (straight peg type) 200 mm not less than kg made 35 mm thick shutters with laminated veneer lumber styles as per TADS IS:1995 and panels of 12 mm thick plain type-I, density flat pressed three layer, graded particle board (FPT-I) as IS:3087-1985 bonded with BWP type synthetic resin adhesive, as per made 35 mm thick shutters with laminated veneer lumber styles as per TADS IS:1995 and panels of 12 mm thick both sides type-I, medium density flat pressed three layer, graded board (FPT-I) as per IS:3087-1985 bonded with BWP type resin adhesive, as per IS:848-1974 made 35 mm thick shutters with laminated veneer lumber styles as per TADS IS:1995 and panels of 12 mm thick one side type-I, and other side balancing lamination, medium flat pressed three layer, graded particle board (FPT-I) as per bonded with BWP type synthetic resin adhesive, as per made 30 mm thick shutters with laminated veneer lumber styles as per TADS IS:1995 and panels of sheet glass using 10 kg/ sqm panes made 35 mm thick shutters with laminated veneer lumber styles as per TADS IS:1995 and panels of galvanised wire gauge with width of aperture 1.4 mm on both directions with wire of dia mm made 30 mm thick shutters with laminated veneer lumber styles as per TADS IS:1995 and panels of galvanised wire gauge with width of aperture 1.4 mm on both directions with wire of dia mm veneer lumber confirming to TADSS IS:1995 manufactured in in frames of doors, windows M.S. safety chain (weighing not less than 450 gms) for door mm thick particle board class teak wood lipping 25 mm wide x 12 mm thick mm thick melamine faced prelaminated three layer particle board flush door shutters Extra for providing teak veneering on one side of commercial veneering fastener with plastic sleeve and M.S. screws. 25 mm long fastener with plastic sleeve and M.S. screws. 32 mm long fastener with plastic sleeve and M.S. screws. 40 mm long fastener with plastic sleeve and M.S. screws. 50 mm long mm M.S. ‘U’ beading reinforced Gyp sum ( GRG) board 8.5 mm thick M.S. sheet 0.5 mm thick pressed channel section of size mm M.S. sheet 0.50 mm thick pressed stud. 48x34x36 mm single cleat of size 30x32x3 grip strip of size 50x12x2 mm prelaminated flush door both side decorative U beading sheet (Pin headed) 4 mm thick particle board with commercial veneering on both sides 12 mm particle board with one side decorative and other side lamination, flat pressed 3 layer & graded (medium density) I, Type II conforming to IS: 12823 (exterior grade)12 mm thick particle board with one side decorative and other side lamination, flat pressed 3 layer & graded (medium density) I, Type II conforming to IS: 12823 (exterior grade)18 mm thick particle board with one side decorative and other side lamination, flat pressed 3 layer & graded (medium density) I, Type II conforming to IS: 12823 (exterior grade)25 mm thick particle board with both sides decorative lamination, flat 3 layer & graded (medium density) Grade I, Type II conforming IS: 12823 (exterior grade)12 mm thick M. S. hinges finished with nickel plating 50 mm (Over all width) M. S. hinges finished with nickel plating 65 mm (Over all width) handle 125x34x24mm handle 150x34x24mm butt hinges 75x60x10mm butt hinges 100x75x10mm Tower bolt 152x42x18mm Tower bolt 202x42x18mm door catcher 72x42mm veneered board 4mm thick veneered board 6mm thick veneered board 18mm thick mm thick Factory made shutters with frame, rails and panels of PVC sections in white, grey or wooden finish mm thick Factory made shutters with frame, rails and panels of PVC sections in white, grey or wooden finish made PVC rigid foam paneled shutter i/c carriage made PVC rigid foam paneled shutter as per IS: 4020 i/c made PVC rigid foam sheet 1mm thick thick Factory made door frame of PVC extruded in white, grey or wooden finish made door frame PVC extruded sheet i/c carriage coated M.S. butt hinges 100mm X58mmX1.9mm steel screws 50 mm steel screws 40 mm steel screws 30 mm steel screws 20 mm steel butt hinges 125x64x1.9 mm IS: 12817 marked steel butt hinges 100x58x1.9 mm IS: 12817 marked steel butt hinges 75x47x1.8 mm IS: 12817 marked steel butt hinges 50x37x1.5 mm IS: 12817 marked steel butt hinges (heavy weight) 125x64x2.5 mm IS: 12817 steel butt hinges (heavy weight) 100x60x2.5 mm IS: 12817 steel butt hinges (heavy weight) 75x50x2.5 mm IS: 12817 heavy weight but hinges 125x90x4.0mm IS: 1341 marked. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked heavy weight butt hinges 50x40x2.5 mm IS: 1341 marked thick 35mm wide bright finished stainless steel piano hinges. mm thick tapered edge calcium silicate board. mm thick calcium silicate board. drawer channels 300mm long. steel roller for sliding arrangement in racks/ shutter. thick Factory made door frame of PVC extruded in white, grey or wooden finish thick factory made PVC flush door shutter i/c carriage. made glass reinforced plastic door frame 90x45 mm i/c carriage. mm thick factory made glass fiber reinforced plastic panel door i/c carriage. made solid PVC door frame 60 x 30mm i/c carriage. factory made solid PVC panel door shutter i/c carriage. glass reinforced plastic chajja. catcher triple strip vertical type. catcher double strip horizontal type. mm mortice lock with 6 levers for aluminium door. mm thick Glass fibre reinforced Gypsum board. sections 0.55 mm thick having a knurled web of 51.55mm and flanges of 26mm each with lips of 10.55mm. channel having one flange of 20mm and another flange of with thickness of 0.55mm and web of length 27mm. sleeves & wooden screws (40mm) sunk ribbed head screw 25mm. thick marine plywood conforming to IS:710 thick fire retardant plywood conforming to IS: 5509. thick decorative laminated sheet thick decorative laminated sheet mm thick factory made glass fiber reinforced plastic flush door i/c carriage. Wood scantlings Teak Wood- scantling Wood( Jam, Garjan, Chamal) Wood Wood wood 7 ply with teak ply on both faces 9 mm thick for selected planks of Gamair wood wood lipping/ moulded beading or Taj beading of size 18 X 5 mm thick HDF, BWP type Shutter as per IS: 15380 - 2003 & IS: 848 wood - beam wood- beams Teak Wood - Planks wood plug with decorative lamination on both side exterior MDF Board 12 mm thick confirming to IS:14587 with decorative lamination on both side exterior MDF Board 18 mm thick confirming to IS:14587 with decorative lamination one side and other balancing lamination exterior Grade-I MDF Board 25 mm thick to IS: 14587 with decorative lamination one side and other side lamination exterior Grade-I MDF Board 12 mm thick to IS:14587 with decorative lamination one side and other side lamination exterior Grade-I MDF Board 18 mm thick to IS:14587 edge bending tape 2.00 mm thick plug 50 mm (designation 10 nos) plated bright finished mild steel piano hinges 1 mm thick mm wide wood shutter for doors wood Panelling mm thick, light weight,fully perforated square/butt edge integral ceiling tiles of size 595x595 mm. M.S. sheet 0.5 mm thick channel section of size 50x32 mm M.S. sheet 0.50 mm thick stud: 48x34x36 mm tapping pan head nickle coated mild steel screws of size 13 x 3.2 mm dia 50 mm long wedge type expanded zinc alloy dash fastner wool 50 mm thick silicate base compound for calcium silicate tiles joint tape 50 mm wide (90 metre) rollB430:B433B429:B433 iron reinforcement for:- Galvanized iron (1.6 ± 0.2 mm) thick for small series casement window frame, sash, mullion iron (1.6 ± 0.2 mm) thick reinforcement for big series window frame, sash, mullion, iron (1.6 ± 0.2 mm) thick reinforcement for big series door sash iron (1.6 ± 0.2 mm) thick reinforcement for big series sliding sash (2 track sliding window sash fasteners 100 x 8 mm steel tubes hot finished welded type Gasket for uPVC window alloy (white powder coated) 3D Hinges for uPVC door alloy (white powder coated) handles with zinc plated mild steel point locking having transmission gear, cylinder with keeps and side key for uPVC casement door alloy (white powder coated) handles along with zinc plated mild multi point locking having transmission gear with keeps for uPVC window alloy (white powder coated) handles along with zinc plated mild multi point locking having transmission gear with keeps for Upvc door extruded (small series) casement window frame size 47x50mm extruded (small series) casement window sash/window mullion 47x68 mm glazing bead of appropriate dimension for small series window Sash extruded (big series) casement window frame size 67x60 mm extruded (big series) casement door frame size 67x64 mm extruded (big series) casement window sash/window mullion size mm extruded (big series) casement door sash size 67x110 mm extruded glazing bead of appropriate dimension for big series window sash extruded glazing bead of appropriate dimension for small series window sash extruded glazing bead ofappropriate dimension for big series of window Sash extruded (small series) 2 track sliding window frame size 52x44 extruded (big series) 2 track sliding window frame size 67x50mm extruded (small series) 3 track sliding window frame size 92x44 extruded (big series) 3 track sliding window frame size 116x45mm extruded (small series) 2 track sliding window sash size 32x60mm extruded (big series) 2 track sliding window sash size 46x62mm extruded (big series) 3 track sliding window sash size 46x62mm extruded interlock of appropriate dimension for small series window sash extruded interlock of appropriate dimension for big series window sash extruded inline adaptor of appropriate dimension for big series window sash extruded (big series) 2 track sliding door sash size 46x82mm steel screws 30mm x4mm. x 55mm x 2mm thick Factory made door frame of PVC extruded in white,grey or wooden finish alloy (white powder coated) touch lock with hook for wire mesh alloy (white powder coated) casement handle for uPVC window alloy (white powder coated) touch lock with hook for uPVC window alloy body with single nylon roller (weight bearing capacity to be 40 for uPVC sliding window Steel (SS - 304) with adjustable double nylon roller (weight capacity to be 120 Kg) for uPVC sliding window alloy (white powder coated) cresent lock for uPVC sliding window steel friction hinge of size 200 mm x 19 x 1.9 mm for windows steel friction hinge of size 250 mm x 19 x 1.9 mm for uPVC steel friction hinges (SS-304 grade) size 300 x 19 x mm for uPVC window steel friction hinges (SS-304 grade) size 400 x 19 x 1.9 mm for window steel friction hinges (SS-304 grade) size 400 x 19 x 1.9 mm for window pile/ weather pile strip for uPVC sliding window i/c 5% wastage steel dash fastener of 8 mm dia and 75 mm long bolt Steel steel fancy handles (75 mm) for kitchen cabinet steel fancy handles (100mm) for kitchen cabinet steel fancy handles (125mm) for kitchen cabinet thick both sides Pre-laminated cement bonded wood particle as per IS: 15786:2008 thick both sides Pre-laminated cement bonded wood particle board per IS: 15786:2008 thick both sides Pre-laminated cement bonded wood particle board per IS: 15786:2008 thick both side balancing lamination factory pressed BWP grade ply as per IS 710 panes of required thickness having 120 minutes of fire resistance integrity and radiation control (EW120) and minimum 20 minutes of (EI 20) U beading of 1.6 mm thick G.I. Sheet with M4x38mm SS screws tape 5x20 mm size screws 30mm screws 20mm steel fancy handle closing stainless steel hinges closing stainless steel hinges steel (Grade-304) basket (readymade) laminated both side solid foam uPVC profile (45x20mm) foam uPVC sheet 20mm thick prelaminated on both side edge beading fastner with plastic sleeve zinc coated hinges 19-20 mm thick with mounting plate | Cum | 1,23,088.00 |
Other chapters in this schedule
- Earth Work (27)
- Mortars (10)
- Cement Concrete (34)
- Reinforced Cement Concrete (60)
- Brick Work (79)
- Wood & PVC Work (291)
- Steel Work (43)
- Finishing Work (80)
- Repairs to Building (74)
- Dismantling & Demolishing (33)
- Aluminium Work & Structural Glazing (9)
- Water Proofing & Rehabilitation Work (9)
- Sanitary Installations (9)
- Water Supply (315)
- Sewage & Drainage (37)
- Bamboo & Thatch Roofing Work (22)
Pricing cladding work against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works