Skip to main content

Tripura SOR 2023

Sanitary Installations rates

9 sanitary installations items from the Tripura PWD (R&B and Buildings), effective 2023-04-01.

Sanitary Installations rates in the Tripura Building Schedule of Rates 2023 run from ₹1,834.00 to ₹8,243.40. Transcribed from Tripura PWD — SoR 2023: Building Works, basic rates as on or just before 01.04.2023. Reference only — verify against the official source before pricing a bid.

Download the full schedule (Excel)All 17 chapters

9 items — scroll the table to browse

DescriptionUnit
18.1Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. Stainless Steel AISI-304(18/8) Orissa pattern W.C pan of size 585x480 mm with flush pipe and integratedf type of foot restsEach5,680.10
18.2Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid W.C. pan with ISI marked black solid plastic seat and lidEach5,373.80
18.3Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. W.C. pan with ISI marked black solid plastic seat and lidEach6,627.30
18.4Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Range of three urinal basins with10 litre white P.V.C. automatic flushing cistern. Range of four urinal basins with 10 litre white P.V.C. automatic flushing cisternEach4,507.40
18.5Providing and Fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required: Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. Range of four half stall urinals with 10 litre P.V.C. automatic flushing cisternEach8,243.40
18.6Providing and Fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. Automatic flushing cistern, with fittings, standard size G.I. flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required: Single squatting plate with 5 litre P.V.C. automatic flushing cistern. Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. Range of four squatting plates with 10 litre P.V.C. automatic flushing cisternEach6,508.90
18.7Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of L5 mm C.P. brass pillar taps with elbow operated levers. White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tapEach4,077.20
18.8Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittingsEach1,834.00
18.9Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x250 mm. Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510x1040 mm bowl depth 250mm. 510x1040 mm bowl depth 225mm. 510x1040 mm bowl depth 200mm. 460x915 mm bowl depth 178mm. Kitchen sink without drain board 610x510 mm bowl depth 200 mm. 610x460 mm bowl depth 200 mm. 470x420 mm bowl depth 178 mm. Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required: Size 450x300x150mm Size 600x450x200mm Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever required: White glazed fire clay draining board of size 600x450x25mm Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm Orissa pattern W.C. pan of size 580x440 mm Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 250x130x30 mm 250x125x25 mm Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity-White 10 litre capacity-coloured Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white 10 litre (full flush) capacity-coloured Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with lid Black solid plastic seat with lid Coloured (other than black & white) solid plastic seat with lid DELETED Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively. Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: Flat back wash basin of size 630x450mm. Flat back wash basin of size 550x400mm. Angle back wash basin of size 600x480mm. Angle back wash basin of size 400x400mm. Flat back wash basin of size 450x300mm. Surgeon type wash basin of size 660x460mm. Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: Size 450x300x150 mm. Size 600x450x200 mm. Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 40 mm dia Flexible pipe 32 mm dia 40 mm dia Providing and fixing 100 mm sand cast Iron grating for gully trap. Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Circular shape 450 mm dia Rectangular shape 453x357mm Oval shape 450x350mm (outer dimensions) Rectangular shape 1500x450 mm Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing toilet paper holder: C.P. brass Vitreous china Providing and fixing soil, waste and vent pipes: 100 mm dia. Sand cast iron S&S pipe as per IS: 1729. Centrifugally cast (spun) iron socketed pipe as per IS: 3989. 75 mm diameter: Sand cast iron S&S pipe as per IS: 1729. Centrifugally cast (spun) iron socketed pipe as per IS: 3989. Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement: 2 fine sand) in S.C.I./C.I. Pipes: 75mm dia pipe 100 mm dia pipe Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.: For 100 mm dia. Pipe For 75 mm dia. Pipe Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75 mm dia Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS- 3989 Providing and fixing plain bend of required degree. 100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS: 3989 75 mm Sand cast iron S&S as per IS -1729 Sand cast iron S&S as per IS - 3989 Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing double equal junction of required degree with access door,insertion rubber washer 3 mm thick, bolts and nuts complete: 100x100x100x100mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75x75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing double equal plain junction of required degree. 100x100x100x100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75x75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing single equal plain junction of required degree 100x100x100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: 100x100x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: 100x100x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing single unequal plain junction of required degree: 100x100x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing double equal plain invert branch of required degree: 100x100x100x100mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS 3989 75x75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing single equal plain invert branch of required degree: 100x100x100 mm Sand cast iron S&S as per iron 1729 Sand cast iron S&S as per IS - 3989 75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing double unequal invert branch of required degree 100x100x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing single unequal plain invert branch of required degree: 100x100x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing sand cast iron S&S offsets as per IS: 1729 76 mm offsets With 75 mm dia. pipe With 100 mm dia. pipe 114 mm offsets With 75 mm dia. pipe With 100 mm dia. Pipe 152 mm offsets With 75 mm dia. Pipe With 100 mm dia. pipe Providing and fixing sand cast iron S&S offsets as per IS: 3989. 75 mm offsets With 75 mm dia. pipe 150 mm offsets With 75 mm dia. pipe With 100 mm dia. pipe Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete 100mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing terminal guard: 100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing collar: 100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS- 3989 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: 100mm 75 mm 50 mm Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter: 100 mm 75 mm 50 mm Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989. Sand Cast Iron S&S as per IS: 1729. 100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS - 3989 Sand Cast Iron S&S as per IS- 1729. Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement: 3 coarse sand:6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand): 100mmdia. 75 mmdia. 50mmdia. Painting C.I. cistern with bitumastic or any other anti- corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality ) on the outside surface of the cistern flush pipe, other fittings, etc. complete for new work. Re-painting C.I. cistern with bitumastic or any other anti- corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work: 100 mm diameter pipe 75 mm diameter pipe Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc: 100 mm diameter pipe 75 mm diameter pipe Repainting bath tub of size 1700x730x430mm with enamel paint. Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat lid with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend 20mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. Providing and fixing PTMT Waste Coupling for washbasin and sink, of approved quality and colour. Waste coupling 31 mm of 79mm length and 62mm breadth weighing not less than 45 gms. Waste coupling 38mm of 83mm length and 77mm breadth, weighing not less than 60gms. Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms. Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms. Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. Providing and fixing PTMT shelf 440 mm long, 124 mm widthand 36 mm height of approved quality and colour, weighing not less than 300gms. Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60gms. Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48gms Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6mm, one bolts on each side of the pipe. Total bracket length 580mm of approved shape and design (for single 100mm dia pipes) Total bracket length 810 mm of approved shape and design (for two 100mm dia pipes) Total bracket length 1040 mm of approved shape and design (for three 100mm dia pipes) Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer- in-Charge. u - PVC PIPES WITH FITTINGS Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 4 kg / cm2) conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion: Single socketed pipe - 75 mm OD Single socketed pipe - 110 mm OD Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 6 kg / cm2) conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion: Single socketed pipe - 110 mm OD Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC soil, waste & vent pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion: Coupler 75 mm 110 mm Single pushfit Coupler 75 mm 110 mm Single equal tee without door 75x75x75 mm 110x110x110mm Single equal tee with door 75x75x75 mm 110x110x110mm Bend 87.5° 75mm 110mm Plain shoe 75mm 110mm Double equal junction of required degree without door 75x75x75 x 75 mm 110x110x110 x110 mm Double equal junction of required degree with door 75x75x75 x 75 mm 110x110x110 x110 mm Double unequal junction of required degree without door 110x110x75 x 75 mm Double unequal junction of required degree with door 110x110x75 x 75 mm Single unequal junction of required degree without door 110x110x75 mm Single unequal junction of required degree with door 110x110x75 mm Terminal guard 75 mm 110 mm Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1: 4 (1cement: 4 fine sand) making good the wall etc. complete. 75mm 110mm Providing and fixing 25mm x 1.40 mm clips made out of aluminium strip of approved design to unplasticised PVC soil, waste & vent pipes by means of Plastic Wall Plugs fitted in the brick work/R.C.C work by drilling with the help of mechaine and screwed with M.S. screws of required length and making good the wall etc. complete. 75mm 110mm Providing and fixing to the inlet mouth of soil, waste & vent pipes pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete. 75mm 100mm Providing and fixing grab bar in disable friendly bathrooms using C.P. brass screws and washers complete as per direction of Engineer-in- charge. Stainless steel Grab Bar 692 mm Vertical swing white 738 mm Hire charge of Derrick monkey rope and other accessories- Hire charges Belder Bhisti/Waterman Carpenter (average) Carpenter 2nd Class Coolie/Helper/khalashi Fitter (2nd class) Fitter (grade-1) Foreman Mason (average) Mason (brick layer) 1st class Mason (brick layer) 2nd class Painter Carriage Brick/ Stone aggregate 40 mm nominal size and above Brick/ Stone aggregate below 40 mm nominal size Bricks Cast iron fittings Cast iron pipes 1000 mm dia Cast iron pipes 150 mm dia Cast iron pipes 200 mm dia Cast iron pipes 250 mm dia Cast iron pipes 300 mm dia Cast iron pipes 350 mm dia Cast iron pipes 400 mm dia Cast iron pipes 450 mm dia Cast iron pipes 500 mm dia Cast iron pipes 600 mm dia Cast iron pipes 700 mm dia Cast iron pipes 800 mm dia Cast iron pipes 900 mm dia Cement Ductile iron pipes (k7) 100 mm dia Fine Sand G.I. pipes below 100 mm dia Pig lead Spun iron S & S pipes 100 mm dia Spun iron S & S pipes 125 mm dia Spun iron S & S pipes 150 mm dia Spun iron S & S pipes 200 mm dia Spun iron S & S pipes 250 mm dia Spun iron S & S pipes 300 mm dia Spun iron S & S pipes 350 mm dia Spun iron S & S pipes 400 mm dia Spun iron S & S pipes 450 mm dia Spun iron S & S pipes 500 mm dia Spun iron S & S pipes 600mm dia Steel Materials Fuel wood Fine sand (local quarry) Fine sand (selected quarry) Kerosene oil Portland Cement Stone Aggregate (Single size): 40 mm nominal size Stone Aggregate (Single size): 20 mm nominal size Stone Aggregate (Single size): 12 mm nominal size Safeda ballies/Local ballies 100/125 mm diameter Second local wood in planks Twisted steel / deformed TMT bars Fe-500D Bricks 1st Class Bricks 2nd Class Anticorrosive bituminous paint (black) Red oxide Zinc chromate primer Synthetic enamel paint in all shades except black or chocolate shade Pig lead Bleaching powder Surface box for stop cock Surface box for sluice valve Surface box for water meter Brass bib-cock 15 mm dia Brass bib-cock 20 mm dia Brass stop-cock 15 mm dia Brass stop-cock 20 mm dia C.I.mouth, brass ferrule 15 mm dia C.I.mouth, brass ferrule 20 mm dia C.I.mouth, brass ferrule 25 mm dia Rubber insertions for 80 mm dia pipe joints Rubber insertions for 100 mm dia pipe joints Rubber insertions for 125 mm dia pipe joints Rubber insertions for 150 mm dia pipe joints Rubber insertions for 200 mm dia pipe joints Rubber insertions for 250 mm dia pipe joints Rubber insertions for 300 mm dia pipe joints Rubber insertions for 350 mm dia pipe joints Rubber insertions for 400 mm dia pipe joints Rubber insertions for 450 mm dia pipe joints Rubber insertions for 500 mm dia pipe joints Rubber insertions for 600 mm dia pipe joints S & S.C.I.standard specials up to 300 mm dia (heavy class) S & S.C.I.standard specials over 300 mm dia (heavy class) Flanged C.I. standard specials up to 300 mm dia(heavy class) Flanged C.I. standard specials over 300 mm dia(heavy class) G.I. pipes 15 mm dia of medim class as per IS: 1239 G.I. pipes 20 mm dia of medim class as per IS: 1239 G.I. pipes 25 mm dia of medim class as per IS: 1239 G.I. pipes 32 mm dia of medim class as per IS: 1239 G.I. pipes 40 mm dia of medim class as per IS: 1239 G.I. pipes 50 mm dia of medim class as per IS: 1239 G.I. pipes 65 mm dia of medim class as per IS: 1239 G.I. pipes 80 mm dia of medim class as per IS: 1239 G.I. back (jam) nuts25 mm dia G.I. back (jam) nuts65 mm dia G.I. tees (equal) 25 mm G.I. tees (equal) 65 mm G.I. Union 15 mm nominal bore G.I. Union 20 mm nominal bore G.I. Union 25 mm nominal bore G.I. Union 32 mm nominal bore G.I. Union 40 mm nominal bore G.I. Union 50 mm nominal bore G.I. Union 65 mm nominal bore G.I. Union 80mm nominal bore Polyethylene water storage tank with cover and suitable locking arrangement Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore Unplasticised P.V.C. connection pipe with brass union 30 cm long 20 mm bore Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore Unplasticised P.V.C. connection pipe with brass union 45 cm long 20 mm bore S.C.I. hand pump Shower rose C.P.brass for 15 to 20 mm inlet 100 mm dia Shower rose C.P.brass for 15 to 20 mm inlet 150 mm dia Spun yarn Strainer brass 40 mm dia 1.5 metre long H.P. or L.P. ball valve with polythene floats: 15 mm dia H.P. or L.P. ball valve with polythene floats: 20 mm dia H.P. or L.P. ball valve with polythene floats: 25 mm dia Brass full way valve with C.I. wheel (screwed end) 25 mm dia Brass full way valve with C.I. wheel (screwed end) 32 mm dia Brass full way valve with C.I. wheel (screwed end) 40 mm dia Brass full way valve with C.I. wheel (screwed end) 50 mm dia Brass full way valve with C.I. wheel (screwed end) 65 mm dia Brass full way valve with C.I. wheel (screwed end) 80 mm dia Gunmetal non-return valve-horizontal (screwed end) 25 mm dia Gunmetal non-return valve-horizontal (screwed end) 32 mm dia Gunmetal non-return valve-horizontal (screwed end) 40 mm dia Gunmetal non-return valve-horizontal (screwed end) 50 mm dia Gunmetal non-return valve-horizontal (screwed end) 65 mm dia Gunmetal non-return valve-horizontal (screwed end) 80 mm dia C.I.sluice valve (with caps) class I: 100 mm dia C.I.sluice valve (with caps) class I: 125 mm dia C.I.sluice valve (with caps) class I: 150 mm dia C.I.sluice valve (with caps) class I: 200 mm dia C.I.sluice valve (with caps) class I: 250 mm dia C.I.sluice valve (with caps) class I: 300 mm dia Bolts and nuts 16 mm dia 60 mm long Bolts and nuts 16 mm dia 65 mm long Bolts and nuts 20 mm dia 65 mm long Bolts and nuts 20 mm dia 70 mm long Bolts and nuts 20 mm dia 75 mm long Bolts and nuts 20 mm dia 80 mm long Bolts and nuts 24 mm dia 85 mm long Bolts and nuts 24 mm dia 90 mm long Bolts and nuts 27 mm dia 100 mm long Gunmetal non-return valve-horizontal (screwed end) 25 mm dia Gunmetal non-return valve-horizontal (screwed end) 32 mm dia Gunmetal non-return valve-horizontal (screwed end) 40 mm dia Gunmetal non-return valve-horizontal (screwed end) 50 mm dia Gunmetal non-return valve-horizontal (screwed end) 65 mm dia Gunmetal non-return valve-horizontal (screwed end) 80 mm dia C.I.sluice valve (with caps) class II: 100 mm dia C.I.sluice valve (with caps) class II: 125 mm dia C.I.sluice valve (with caps) class II: 150 mm dia C.I.sluice valve (with caps) class II: 200 mm dia C.I.sluice valve (with caps) class II: 250 mm dia C.I.sluice valve (with caps) class II: 300 mm dia C.P. Brass bib cock 15 mm C.P. Brass long nose bibcock 15 mm C.P. Brass long body bibcock 15 mm C.P. Brass stop cock (concealed) 15 mm C.P. Brass angle valve 15 mm 15 mm PTMT bib cock 15 mm PTMT bib cock with flange (fancy) 15 mm PTMT bib cock long body with flange 15 mm dia PTMT stop cock(male thread) 20 mm dia. PTMT stop cock PTMT pillar cock PTMT push cock 15 mm dia. PTMT push cock 12 mm dia. 20 mm BSP PTMT grating 100 mm dia. PTMT grating 75 mm dia. 125 mm grating with waste hole Rectangular type with openable circular lid 150 mm size 18 mm high with 100 mm dia. (110 gm) Double acting air valve 50 mm Double acting air valve 80 mm Double acting air valve 100 mm Water meter (including testing charges) 80 mm Water meter (including testing charges) 100 mm Water meter (including testing charges) 150 mm Water meter (including testing charges) 200 mm Dirt box strainer 80 mm Dirt box strainer 100 mm Dirt box strainer 150 mm Dirt box strainer 200 mm PTMT Ball Cock 15mm Complete with Epoxy Coated Aluminium Road & H.D. Ball PTMT Ball Cock 20mm Complete with Epoxy Coated Aluminium Road & H.D. Ball PTMT Ball Cock 25mm Complete with Epoxy Coated Aluminium Road & H.D. Ball PTMT Ball Cock 40mm Complete with Epoxy Coated Aluminium Road & H.D. Ball PTMT Ball Cock 50mm Complete with Epoxy Coated Aluminium Road & H.D. Ball PTMT Angle Stop cock with Flange 15mm PTMT Swiveling shower 15mm PTMT Soap Dish/Holder 138x102x75mm Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 150mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 200mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 300mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 400mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 450mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 600mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 900mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 100mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 150mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 200mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 250mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 300mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 350mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 400mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 450mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 500mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 600mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 650mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 700mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 800mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 900mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 1000mm dia Ductile Iron K - 12 specials suitable for push on jointing up to 600mm dia Ductile Iron K - 12 specials suitable for push on jointing over 600mm dia Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 -up to 600mm dia Ductile Iron Specials suitable for mechanical jointing as per I.S. 9523 over 600mm dia Ductile Iron Pipe Class K-9 flanges and welding 100mm dia Ductile Iron Pipe Class K-9 flanges and welding 150 dia Ductile Iron Pipe Class K-9 flanges and welding 200mm dia Ductile Iron Pipe Class K-9 flanges and welding 250mm dia Ductile Iron Pipe Class K-9 flanges and welding 300mm dia Ductile Iron Pipe Class K-9 flanges and welding 350mm dia Ductile Iron Pipe Class K-9 flanges and welding 400mm dia Ductile Iron Pipe Class K-9 flanges and welding 450mm dia Ductile Iron Pipe Class K-9 flanges and welding 500mm dia Ductile Iron Pipe Class K-9 flanges and welding 600mm dia Ductile Iron Pipe Class K-9 flanges and welding 700mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 100mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 125mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 150mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 200mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 250mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 300mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 350mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 400mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 450mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 500mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 600mm dia S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing up to 300mm dia for lead jointing up to 300mm dia S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing over 300mm dia S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint as per I.S. 13382 up to 300mm dia S&S Centrifugally (Spun) C.I. Pipe Specials suitable for mechanical joint as per IS 13382 over 300mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 100mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 150mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 200mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 250mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 300mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 350mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 400mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 450mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 500mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 600mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 150mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 200mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 250mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 300mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 350mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 400mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 450mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 500mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 700mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 800mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 900mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000mm dia P.T.M.T. Bib cock with nozzle 15mm P.T.M.T. Stop cock (concealed) 15mm 15 mm nominal bore and 30 cm length PVC connection pipe with P.T.M.T. Nuts 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts P.T.M.T. extension nipple 15mm P.T.M.T. extension nipple 20mm P.T.M.T. extension nipple 25mm 1216 mm PE-AL-PE Composite pressure pipe 1620 mm PE-AL-PE Composite pressure pipe 2025 mm PE-AL-PE Composite pressure pipe 2532 mm PE-AL-PE Composite pressure pipe 3240 mm PE-AL-PE Composite pressure pipe 4050 mm PE-AL-PE Composite pressure pipe Poly propylene- Random - Co - Polymer (PPR) pipes SDR 7.4 - 16 Outer dia Poly propylene - Random - Co - Polymer (PPR) pipes SDR 7.4 - 20mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 25 mm outer dia. Poly propylene - Random - Co - poymer (PPR) pipes SDR 7.4 - 32 mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 40mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 50mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 63mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 75mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 90 mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11 - 110mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11- 160mm Outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5mm inner dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm inner dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm inner dia. 15 mm Battery Based Sensor Pillar CockEach3,715.60

Other chapters in this schedule

Pricing sanitary installations against a live tender

Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works