Tripura SOR 2023
Repairs to Building rates
74 repairs to building items from the Tripura PWD (R&B and Buildings), effective 2023-04-01.
Repairs to Building rates in the Tripura Building Schedule of Rates 2023 run from ₹0.30 to ₹1,16,347.90. Transcribed from Tripura PWD — SoR 2023: Building Works, basic rates as on or just before 01.04.2023. Reference only — verify against the official source before pricing a bid.
/
74 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 13.2 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after.The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge.The elevational area of the scaffolding shall be measured for payment purpose.The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done | Sqm | 280.90 |
| 13.3 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) | Litre | 0.30 |
| 13.4 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge | Each | 66.80 |
| 13.5 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth | Metre | 299.70 |
| 13.6 | Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations: (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge | Sqm | 58.60 |
| 13.7 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge | Each | 266.30 |
| 13.8.1 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in chargeLong pattern W.C Pan of size 580x440 mm | Each | 2,902.30 |
| 13.8.2 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in chargeOrissa pattern W.C Pan of size 580x440 mm | Each | 4,019.80 |
| 13.9 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge | Each | 83.50 |
| 13.10.1 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-ChargeInternal Work- Exposed on wall | Metre | 3.20 |
| 13.11 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge | Each | 218.60 |
| 13.12 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge | Each | 259.70 |
| 13.13.1 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls, cutting masonry / RCC / CC for hold fasts, embedding hold fasts in cement concrete blocks with cement concrete 1: 3: 6 ( 1 cement: 3 fine sand: 6 graded well burnt brick aggregate 20 mm nominal size ) painting two coats of coal tar to sides of chowkhats and making good the damages to walls and floors as required including disposal of rubbish to the dumping ground with all leads and lifts complete as per direction of the Engineer in chargeDoor chowkhats | Each | 1,376.40 |
| 13.13.2 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls, cutting masonry / RCC / CC for hold fasts, embedding hold fasts in cement concrete blocks with cement concrete 1: 3: 6 ( 1 cement: 3 fine sand: 6 graded well burnt brick aggregate 20 mm nominal size ) painting two coats of coal tar to sides of chowkhats and making good the damages to walls and floors as required including disposal of rubbish to the dumping ground with all leads and lifts complete as per direction of the Engineer in chargeWindow chowkhats | Each | 800.00 |
| 13.13.3 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls, cutting masonry / RCC / CC for hold fasts, embedding hold fasts in cement concrete blocks with cement concrete 1: 3: 6 ( 1 cement: 3 fine sand: 6 graded well burnt brick aggregate 20 mm nominal size ) painting two coats of coal tar to sides of chowkhats and making good the damages to walls and floors as required including disposal of rubbish to the dumping ground with all leads and lifts complete as per direction of the Engineer in chargeClerestory Window chowkhats | Each | 589.60 |
| 13.14 | Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/ Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener | Each | 256.30 |
| 13.15.1 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In- ChargeFor door/ window/ clerestory window | Each | 750.50 |
| 13.16.1 | Renewing glass panes, with putty and nails wherever necessary including racking out the old puttyFloat glass panes of thickness 4 mm | Sqm | 1,017.40 |
| 13.16.2 | Renewing glass panes, with putty and nails wherever necessary including racking out the old puttyFloat glass panes of thickness 5.5 mm | Sqm | 1,254.40 |
| 13.17.1 | Renewing glass panes, with wooden fillets wherever necessaryFloat glass panes of thickness 4 mm | Sqm | 1,292.40 |
| 13.17.2 | Renewing glass panes, with wooden fillets wherever necessaryFloat glass panes of thickness 5.5 mm | Sqm | 1,511.10 |
| 13.18.1 | Renewing glass panes and refixing existing wooden filletsFloat glass panes of thickness 4 mm | Sqm | 1,058.70 |
| 13.18.2 | Renewing glass panes and refixing existing wooden filletsFloat glass panes of thickness 5.5 mm | Sqm | 1,407.10 |
| 13.19.1 | Supplying and fixing new wooden fillets wherever necessaryLocal teak wood fillets | Metre | 41.60 |
| 13.19.2 | Supplying and fixing new wooden fillets wherever necessaryGamair wood fillets | Metre | 41.50 |
| 13.19.3 | Supplying and fixing new wooden fillets wherever necessarySoft wood fillets | Metre | 26.70 |
| 13.20 | Renewal of old putty of glass panes (length) | Metre | 44.10 |
| 13.21 | Refixing old glass panes with putty and nails | Sqm | 449.30 |
| 13.22 | Fixing old glass panes with wooden fillets (excluding cost of fillets) | Sqm | 421.60 |
| 13.23.1 | Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture as required including removal of rubbish to the dumping ground with all leads and lifts complete as per direction of the Engineer in chargeSal wood | Cum | 77,511.80 |
| 13.23.2 | Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture as required including removal of rubbish to the dumping ground with all leads and lifts complete as per direction of the Engineer in chargeKarai wood | Cum | 65,017.20 |
| 13.23.3 | Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture as required including removal of rubbish to the dumping ground with all leads and lifts complete as per direction of the Engineer in chargeSoft wood | Cum | 43,075.70 |
| 13.24.1 | Renewing wooden beams in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture as required including removal of rubbish to the dumping ground with all leads and lifts complete as per direction of the Engineer in chargeNot exceeding 4.0 metre in length:- Sal wood | Cum | 1,16,347.90 |
| 13.25 | Providing and fixing 16 mm dia M.S. fan clamps of standard shape and size in existing RCC slab including cutting chase and making good and painting exposed portion of the clamps as required including disposal of rubbish etc. to the dumping ground with all leads and lifts complete as per direction of the Engineer in charge | Each | 264.20 |
| 13.26 | Fixing of old wind tie with new fittings including painting two or or more coats with anticorrosive bitumastic paint of approved brand and manufacture over and including priming coat of zinc chromate yellow primer of approved brand and manufacture as required complete as per direction of the Engineer in charge | Metre | 106.80 |
| 13.27 | Renewing bottom rail and / or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacture as required including removal of rubbish to the dumping ground with all leads and lifts complete as per direction of the Engineer in charge | KG | 427.00 |
| 13.28 | Dismantling rolling shutters with all accessories and stacking properly and refitting the same after oiling and greasing the same with necessary cement concrete for fitting fixing of hold fasts etc. for all lifts and upto a lead of 50 m as required complete as per direction of the Engineer in charge | Sqm | 950.50 |
| 13.29.1 | Wheel 50 mm dia and below | Each | 199.00 |
| 13.29.2 | Wheel above 50 mm dia | Each | 213.80 |
| 13.31 | Providing and applying cement slurry on old CC / RCC / Brick works in joints to receive new and fresh CC / RCC / Brick works including roughening and cleaning the old surface as required complete as per direction of the Engineer in charge | Sqm | 81.20 |
| 13.33 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Sqm | 13.30 |
| 13.34 | Distempering with dry distemper of approved brand and manufacture and of required shade on old work ( one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge | Sqm | 44.50 |
| 13.35 | Distempering with 1st quality washable acrylic distemper of approved brand and manufacture and of required shade on old work ( one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge | Sqm | 46.20 |
| 13.37 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Sqm | 17.40 |
| 13.38 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 57.30 |
| 13.39 | Finishing walls with textured exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 139.10 |
| 13.40 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 81.10 |
| 13.41 | Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 78.00 |
| 13.42 | Painting one thin coat with white lead of approved brand and manufacture on wet or patchy portion of plastered surface on old work including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 92.70 |
| 13.43.1 | Finishing with epoxy paint ( one or more coats ) of approved brand and manufacture at all locations prepared and applied as per manufacturer's specification on old work including preparation of surface etc. as required complete as per direction of the Engineer in chargeOn steel work | Sqm | 80.00 |
| 13.43.2 | Finishing with epoxy paint ( one or more coats ) of approved brand and manufacture at all locations prepared and applied as per manufacturer's specification on old work including preparation of surface etc. as required complete as per direction of the Engineer in chargeOn concrete work | Sqm | 83.60 |
| 13.44 | Painting on G.S. sheet with synthetic enamel paint ( one or more coats ) of approved brand and manufacture of required colour to give an even shade on old work including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 69.30 |
| 13.45.1 | Painting on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint ( one or more coats ) of approved brand and manufacture to give an even shade on old work including preparation of surface as required complete as per direction of the Engineer in charge50 mm dia | Metre | 20.40 |
| 13.45.2 | Painting on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint ( one or more coats ) of approved brand and manufacture to give an even shade on old work including preparation of surface as required complete as per direction of the Engineer in charge75 mm dia | Metre | 28.20 |
| 13.45.3 | Painting on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint ( one or more coats ) of approved brand and manufacture to give an even shade on old work including preparation of surface as required complete as per direction of the Engineer in charge100 mm dia | Metre | 37.70 |
| 13.45.4 | Painting on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint ( one or more coats ) of approved brand and manufacture to give an even shade on old work including preparation of surface as required complete as per direction of the Engineer in charge150 mm dia | Metre | 58.00 |
| 13.46.1 | Painting on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint ( one or more coats ) of required colour of approved brand and manufacture to give an even shade on old work over and including preparation of surface as required complete as per direction of the Engineer in charge50 mm dia | Metre | 21.20 |
| 13.46.2 | Painting on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint ( one or more coats ) of required colour of approved brand and manufacture to give an even shade on old work over and including preparation of surface as required complete as per direction of the Engineer in charge75 mm dia | Metre | 29.30 |
| 13.46.3 | Painting on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint ( one or more coats ) of required colour of approved brand and manufacture to give an even shade on old work over and including preparation of surface as required complete as per direction of the Engineer in charge100 mm dia | Metre | 39.40 |
| 13.46.4 | Painting on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint ( one or more coats ) of required colour of approved brand and manufacture to give an even shade on old work over and including preparation of surface as required complete as per direction of the Engineer in charge150 mm dia | Metre | 57.70 |
| 13.47 | Painting on wood work with oil type wood preservative ( one or more coats ) of approved brand and manufacture on old work including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 45.30 |
| 13.48 | Providing and applying fire retardant paint unthinned on cleaned wood / ply surface ( one or more coats ) of required colour of approved brand and manufacture on old work including preparation of surface as per recommendation of the manufacturer to make the surface fire returdant and as required complete as per direction of the Engineer in charge | Sqm | 224.60 |
| 13.49 | Coal tarring ( one or more coats ) of approved brand and manufacture on old work @ 0.16 litre coal tar per sqm including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 44.50 |
| 13.50 | Wall painting with acrylic exterior paint (one or more coats ) of required colour of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 97.50 |
| 13.51 | Painting with enamel paint ( one or more coats ) of required colour of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 71.70 |
| 13.52 | Painting with synthetic enamel paint ( one or more coats ) of required colour of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 75.40 |
| 13.53 | Painting with aluminium paint (one or more coats ) of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 65.20 |
| 13.54 | Painting with acid proof paint ( one or more coats ) of approved brand and manufacture of required colour on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 82.00 |
| 13.55 | Painting with black anticorrosive bitumastic paint ( one or more coats ) of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 63.50 |
| 13.56 | Floor painting with floor enamel paint ( one or more coats ) of approved brand and manufacture of required colour on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 84.80 |
| 13.58 | French spirit polishing ( one or more coats of glue sizing ) on old work including preparation of surface clean, dirt and dust free, sand papered smooth as required complete as per direction of the Engineer in charge | Sqm | 155.00 |
| 13.59 | Polishing on wood work with readymade wax polish ( two or more coats ) of approved brand and manufacture on old work including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 67.80 |
| 13.60 | Floor polishing on masonry / concrete floors with readymade wax polish ( two or more coats ) of approved brand and manufacture on old work including preparation of surface as required complete as per direction of the Engineer in charge | Sqm | 32.60 |
| 13.62 | Painting ( one or more coat ) with black japan paint of approved brand and manufacture on old work to give an even shade as required complete as per direction of the Engineer in charge. Fuel wood Carpenter 2nd class Beldar Coolie Fitter (grade 1) Mason (brick layer) 2nd class Mate Helper Waterman Chowkidar Khalashi Blacksmith 2nd class Kerosene oil | Sqm | 60.40 |
Other chapters in this schedule
- Earth Work (27)
- Mortars (10)
- Cement Concrete (34)
- Reinforced Cement Concrete (60)
- Brick Work (79)
- Cladding Work (38)
- Wood & PVC Work (291)
- Steel Work (43)
- Finishing Work (80)
- Dismantling & Demolishing (33)
- Aluminium Work & Structural Glazing (9)
- Water Proofing & Rehabilitation Work (9)
- Sanitary Installations (9)
- Water Supply (315)
- Sewage & Drainage (37)
- Bamboo & Thatch Roofing Work (22)
Pricing repairs to building against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works