Madhya Pradesh SOR 2023
Measuring Devices rates
40 measuring devices items from the Madhya Pradesh Public Health Engineering Department (PHED), effective 2023-09-01.
Measuring Devices rates in the Madhya Pradesh Unified Schedule of Rates 2023 run from ₹1,152.00 to ₹14,85,267.00. Transcribed from Madhya Pradesh PHED — Unified Schedule of Rates for Water Supply, Sewerage and Allied Works, in force from 1 September 2023. Reference only — verify against the official source before pricing a bid.
/
40 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 13.3.1 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm50 mm | Each | 97,076.00 |
| 13.3.2 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm65 mm | Each | 99,289.00 |
| 13.3.3 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm80 mm | Each | 1,03,121.00 |
| 13.3.4 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm100 mm | Each | 1,14,031.00 |
| 13.3.5 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm150 mm | Each | 1,20,541.00 |
| 13.3.6 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm200 mm | Each | 1,27,746.00 |
| 13.3.7 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm250 mm | Each | 1,55,907.00 |
| 13.3.8 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm300 mm | Each | 1,81,444.00 |
| 13.3.9 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm400 mm | Each | 2,11,470.00 |
| 13.3.10 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm450 mm | Each | 3,04,842.00 |
| 13.3.11 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm500 mm | Each | 3,80,154.00 |
| 13.3.12 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm600 mm | Each | 3,89,824.00 |
| 13.3.13 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm700 mm | Each | 5,00,480.00 |
| 13.3.14 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm900 mm | Each | 8,21,368.00 |
| 13.3.15 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm1000 mm | Each | 9,12,242.00 |
| 13.3.16 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm1200 mm | Each | 10,72,192.00 |
| 13.3.17 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm1400 mm | Each | 13,81,977.00 |
| 13.3.18 | Electromagnetic Bulk Flow Meters Supply of Electromagnetic full bore meter complete as per specification including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipe line, including excavation at site, cuts in the existing pipe system, dewatering and reinstating the same after completion of installation as per specification and drawings including all taxes. Accuracy of meter + 0.3% of measured value, Flange connection as per AWWA & IS, Liner: Rate Hard Rubber, Fully welded sensor housing complying to IP 68 standard, Electrodes SS 316, Sensor housing SS 304, Cable gland 1/2" NPT, Sensor housing fully welded SS 304 housing with protective Polyurethane paint, Flow Transmitter/ Converter: Microprocessor based, modular design display 2 line back lit LCD for indication of actual flow rate, forward, reverse, sum totalizer, Perfection category: IP 65 Output: One current output (4-20 mA) one scalable pulse output Dia in mm2000 mm | Each | 14,85,267.00 |
| 13.4 | Supply & Installation of Lightening Arrester Unit (including Copper Earth plate, strip, G.I. Pipe, Funnel tinned brass bolts, nut, check nut, washer etc., Cover plate with hing and locking arrangement) in all respect | Each | 9,920.00 |
| 13.5 | MS Panel with Transmitter, Totalizer, etc as per specifications | Each | 12,552.00 |
| 13.6 | Uninterruptible Power Supply [6hr Battery Backup (500 VA)] | Each | 25,105.00 |
| 13.7.1 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)40 mm diameter | Each | 1,11,969.00 |
| 13.7.2 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)50 mm diameter | Each | 1,11,969.00 |
| 13.7.3 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)65 mm diameter | Each | 1,11,969.00 |
| 13.7.4 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)80 mm diameter | Each | 1,11,969.00 |
| 13.7.5 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)100 mm diameter | Each | 1,11,969.00 |
| 13.7.6 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)125 mm diameter | Each | 1,11,969.00 |
| 13.7.7 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)150 mm diameter | Each | 1,11,969.00 |
| 13.7.8 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)200 mm diameter | Each | 1,19,644.00 |
| 13.7.9 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)250 mm diameter | Each | 1,19,644.00 |
| 13.7.10 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)300 mm diameter | Each | 1,19,644.00 |
| 13.7.11 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)350 mm diameter | Each | 1,27,183.00 |
| 13.7.12 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)400 mm diameter | Each | 1,27,183.00 |
| 13.7.13 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)450 mm diameter | Each | 1,53,405.00 |
| 13.7.14 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)500 mm diameter | Each | 1,77,964.00 |
| 13.7.15 | Providing, erecting electric valve actuators totally enclosed, weather proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with Rate two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp., AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be at least 1.5 times max. torque required for opening and closing of valve. Electric Valve Actuator for non rising spindle type sluice valve, PN1 & PN 1.6 rating for Valve size (Without integral starter)600 mm diameter | Each | 1,77,964.00 |
| 13.8.1 | Supplying & Installation of Domestic Water Meters of inferential type, multi jet, magnetically coupled, having dry dial, straight reading Class B conforming to IS: 779/1994, ISO and EEC approved, including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipeline, including excavation at site, dewatering and reinstating the same after completion of installation as per specifications including all taxes15mm dia nominal bore | Each | 1,152.00 |
| 13.8.2 | Supplying & Installation of Domestic Water Meters of inferential type, multi jet, magnetically coupled, having dry dial, straight reading Class B conforming to IS: 779/1994, ISO and EEC approved, including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipeline, including excavation at site, dewatering and reinstating the same after completion of installation as per specifications including all taxes20mm dia nominal bore | Each | 1,941.00 |
| 13.8.3 | Supplying & Installation of Domestic Water Meters of inferential type, multi jet, magnetically coupled, having dry dial, straight reading Class B conforming to IS: 779/1994, ISO and EEC approved, including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipeline, including excavation at site, dewatering and reinstating the same after completion of installation as per specifications including all taxes25mm dia nominal bore | Each | 3,488.00 |
| 13.8.4 | Supplying & Installation of Domestic Water Meters of inferential type, multi jet, magnetically coupled, having dry dial, straight reading Class B conforming to IS: 779/1994, ISO and EEC approved, including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipeline, including excavation at site, dewatering and reinstating the same after completion of installation as per specifications including all taxes40mm dia nominal bore MISCELLANEOUS (WATER SUPPLY) MISCELLANEOUS (WATER SUPPLY) 1 The works to be executed in accordance with the General specifications of therelevant IS codes for pipes/specials, jointing materials and laying works. 2 All materials shall conform to relevant IS. 3 Where cracked pipe or cut piece is required to be used on line to take a tyton ring joint, it is necessary to cut the cracked portion and chamfer the pipe. In a cut piece, only chamfering would be required. These rates have been introduced separately for cutting and chamfering. The rates include requirement of tools and plants, lead and lift etc. 4 During the course of execution, it sometimes becomes necessary to provide a non- standard special to fit into the pipeline. This can be conveniently made out of steel plates. An item to cover such emergency is also provided for in the schedule. Similarly, item to provide a mild steel flange has also been introduced to over the specific requirement during execution. 5 An item for laying and jointing steel pipes, incorporating field welding has also been introduced to cover the special requirements during execution. 6 All pavements, paved foot paths, curbing, gutters, shrubbery, fences, poles, rod or other property and surface structures removed or disturbed as a part of the work shall be restored to a condition equal to that before the work began, furnishing all labour and material incidental thereto. In restoring the pavement sound materials may be reuse. No Permanent pavement shall be restored unless and until, in the opinion of the Engineer in charge the condition of the backfill is such as to properly support the pavement. 7 Pavement and road surface may be removed as a part of the trench excavation and the amount removed shall depend upon the width of trench specified for the installation of the pipe and the width and length of the pavement area required to be removed for laying pipes. The width of pavement removal along the normal trench for the installation of the pipe shall not exceed the width of the trench specified by more then 15 cm on each side of the trench. Wherever in the opinion of the Engineer in charge existing conditions make it necessary or advisable to remove additional pavement, it shall be removed as directed by the Engineer in charge. 8 All construction material, and all tools and temporary structures shall be removed form the site as directed by the Engineer in charge. All dirt, rubbish and excess earth form the excavation shall be taken off to a specified dumping site as directed by Engineer in Charge and the construction site shall be kept clean to the satisfaction of the Engineer-in-charge. 9 Where any pavement, shrubbery, fence, poles or other property and surface structures have been damaged, removed or disturbed during the course of the work, such property and surface structures shall be replaced or repaired after completion of work. 10 Measurements Measurement shall be made according to the actual work done and payment shall be made accordingly. 11 Rates: The rate shall include the cost of the material and labour involved in all the operation described in the items. The rates include all plants, chain, pulley blocks, other appliances etc. required for execution of the works. Rates for items and making good roads etc. include lead for the materials. MISCELLANEOUS (WATER SUPPLY) Rates | Each | 6,515.00 |
Other chapters in this schedule
- Ductile Iron Pressure Pipes and Specials with Tyton Joints and DI Valve (669)
- Polyethylene Pipe and Fittings (209)
- Galvanized Iron Pipes, Specials and Gun Metal or Brass Fittings (354)
- Oriented P.V.C. (PVC-O) Pipes (13)
- M.S. Pipes, Specials, Fittings including Fabrication & Laying (75)
- Asbestos Cement Pressure Pipes and Cast Iron Fittings (16)
- Bar Wrapped Steel Cylinder Pipes (BWSC) (270)
- Cast Iron Socket and Spigot Pipes & Specials with Lead Joints, Tyton Joints, Cast Iron Pipes & Specials with Flanged Joints, Cast Iron Valves, Sluice Gate & Air Valves (351)
- Consumer Service Connection (131)
- Water Hammer Devices (96)
- Pumps (172)
- Miscellaneous (Water Supply) (73)
- Allied Civil Works (82)
- Intake Well Related Works (27)
- Ground Service Reservoir & Sump Tanks (GSR) (19)
- Construction of Gravel Packed Tube Well (5)
- Development, Yield Test and Disinfection of Tube Well (6)
- Unplasticized Non-Pressure Polyvinyl Chloride (PVC-U) Pipes, Double Wall Corrugated (DWC) Pipes for Use in Underground Sewerage System (32)
- Reinforced Cement Concrete Pipes (190)
- Salt Glazed Stoneware Pipes, Sewer Appurtenances & Sewerage Maintenance (126)
Pricing measuring devices against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works