Madhya Pradesh SOR 2023
Consumer Service Connection rates
131 consumer service connection items from the Madhya Pradesh Public Health Engineering Department (PHED), effective 2023-09-01.
Consumer Service Connection rates in the Madhya Pradesh Unified Schedule of Rates 2023 run from ₹5.00 to ₹4,063.00. Transcribed from Madhya Pradesh PHED — Unified Schedule of Rates for Water Supply, Sewerage and Allied Works, in force from 1 September 2023. Reference only — verify against the official source before pricing a bid.
/
131 items — scroll the table to browse
| Description | Unit | ||
|---|---|---|---|
| 9.1.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plane and brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall15 mm nominal outer dia. Pipes | Metre | 182.00 |
| 9.1.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plane and brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall20 mm nominal outer dia. Pipes | Metre | 245.00 |
| 9.1.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plane and brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall25 mm nominal outer dia. Pipes | Metre | 323.00 |
| 9.1.4 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plane and brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall32 mm nominal outer dia. Pipes | Metre | 453.00 |
| 9.1.5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plane and brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall40 mm nominal outer dia. Pipes | Metre | 617.00 |
| 9.1.6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plane and brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall50 mm nominal outer dia. Pipes | Metre | 941.00 |
| 9.2.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc15 mm nominal outer dia. Pipes | Metre | 319.00 |
| 9.2.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc20 mm nominal outer dia. Pipes | Metre | 408.00 |
| 9.2.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc25 mm nominal outer dia. Pipes | Metre | 532.00 |
| 9.2.4 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc32 mm nominal outer dia. Pipes | Metre | 717.00 |
| 9.3.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work15 mm nominal outer dia. Pipes | Metre | 106.00 |
| 9.3.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work20 mm nominal outer dia. Pipes | Metre | 124.00 |
| 9.3.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work25 mm nominal outer dia. Pipes | Metre | 154.00 |
| 9.3.4 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work32 mm nominal outer dia. Pipes | Metre | 187.00 |
| 9.3.5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work40 mm nominal outer dia. Pipes | Metre | 279.00 |
| 9.3.6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work50 mm nominal outer dia. Pipes | Metre | 392.00 |
| 9.3.7 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work62.50 mm nominal inner dia. Pipes | Metre | 1,194.00 |
| 9.3.8 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work75 mm nominal inner dia. Pipes | Metre | 1,541.00 |
| 9.3.9 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work100 mm nominal inner dia. Pipes | Metre | 2,133.00 |
| 9.3.10 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work150 mm nominal inner dia. Pipes | Metre | 3,690.00 |
| 9.4.1 | Providing and fixing medium grade G.I. pipes medium class (ISI mark) complete with G.I. fittings (ISI mark) and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall15 mm dia. nominal bore | Metre | 172.00 |
| 9.4.2 | Providing and fixing medium grade G.I. pipes medium class (ISI mark) complete with G.I. fittings (ISI mark) and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall20 mm dia. nominal bore | Metre | 217.00 |
| 9.4.3 | Providing and fixing medium grade G.I. pipes medium class (ISI mark) complete with G.I. fittings (ISI mark) and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall25 mm dia. nominal bore | Metre | 288.00 |
| 9.4.4 | Providing and fixing medium grade G.I. pipes medium class (ISI mark) complete with G.I. fittings (ISI mark) and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall32 mm dia. nominal bore | Metre | 355.00 |
| 9.4.5 | Providing and fixing medium grade G.I. pipes medium class (ISI mark) complete with G.I. fittings (ISI mark) and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall40 mm dia. nominal bore | Metre | 429.00 |
| 9.4.6 | Providing and fixing medium grade G.I. pipes medium class (ISI mark) complete with G.I. fittings (ISI mark) and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall50 mm dia. nominal bore | Metre | 543.00 |
| 9.5.1 | Concealed pipe including painting with anti- corrosive bitumastic paint, cutting chases and making good the wall15 mm dia nominal bore | Metre | 266.00 |
| 9.5.2 | Concealed pipe including painting with anti- corrosive bitumastic paint, cutting chases and making good the wall20 mm dia nominal bore | Metre | 300.00 |
| 9.6.1 | Providing and fixing G.I. pipes medium class complete with G.I. fittings as per IS: 1239 (Part-2) including trenching and refilling etc. External work15 mm dia. nominal bore | Metre | 144.00 |
| 9.6.2 | Providing and fixing G.I. pipes medium class complete with G.I. fittings as per IS: 1239 (Part-2) including trenching and refilling etc. External work20 mm dia. nominal bore | Metre | 170.00 |
| 9.6.3 | Providing and fixing G.I. pipes medium class complete with G.I. fittings as per IS: 1239 (Part-2) including trenching and refilling etc. External work25 mm dia. nominal bore | Metre | 227.00 |
| 9.6.4 | Providing and fixing G.I. pipes medium class complete with G.I. fittings as per IS: 1239 (Part-2) including trenching and refilling etc. External work32 mm dia. nominal bore | Metre | 271.00 |
| 9.6.5 | Providing and fixing G.I. pipes medium class complete with G.I. fittings as per IS: 1239 (Part-2) including trenching and refilling etc. External work40 mm dia. nominal bore | Metre | 317.00 |
| 9.6.6 | Providing and fixing G.I. pipes medium class complete with G.I. fittings as per IS: 1239 (Part-2) including trenching and refilling etc. External work50 mm dia. nominal bore | Metre | 389.00 |
| 9.6.7 | Providing and fixing G.I. pipes medium class complete with G.I. fittings as per IS: 1239 (Part-2) including trenching and refilling etc. External work65 mm dia. nominal bore | Metre | 490.00 |
| 9.6.8 | Providing and fixing G.I. pipes medium class complete with G.I. fittings as per IS: 1239 (Part-2) including trenching and refilling etc. External work80 mm dia. nominal bore | Metre | 626.00 |
| 9.7.1 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete25 to 40 mm nominal bore | Each | 319.00 |
| 9.7.2 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete50 to 80 mm nominal bore | Each | 738.00 |
| 9.8 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). BRASS FITTINGS | Each | 270.00 |
| 9.9.1 | Providing and fixing brass bib cock of approved quality15 mm nominal bore 0.40kg | Each | 230.00 |
| 9.9.2 | Providing and fixing brass bib cock of approved quality20 mm nominal bore 0.75kg | Each | 275.00 |
| 9.10.1 | Providing and fixing brass stop cock of approved quality15 mm nominal bore 0.40kg | Each | 230.00 |
| 9.10.2 | Providing and fixing brass stop cock of approved quality20 mm nominal bore 0.75kg | Each | 275.00 |
| 9.11.1 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)15 mm nominal bore | Each | 140.00 |
| 9.11.2 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)20 mm nominal bore | Each | 217.00 |
| 9.11.3 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)25 mm nominal bore | Each | 251.00 |
| 9.11.4 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)32 mm nominal bore | Each | 380.00 |
| 9.11.5 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)40 mm nominal bore | Each | 503.00 |
| 9.11.6 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)50 mm nominal bore | Each | 759.00 |
| 9.11.7 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)65 mm nominal bore | Each | 1,432.00 |
| 9.11.8 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)80 mm nominal bore | Each | 2,246.00 |
| 9.12.1 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete15 mm nominal bore | Each | 277.00 |
| 9.12.2 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete20 mm nominal bore | Each | 398.00 |
| 9.12.3 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete25 mm nominal bore | Each | 463.00 |
| 9.14.1 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main15 mm nominal bore | Each | 208.00 |
| 9.14.2 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main20 mm nominal bore | Each | 270.00 |
| 9.14.3 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main25 mm nominal bore | Each | 342.00 |
| 9.16.1 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet100 mm diameter | Each | 592.00 |
| 9.16.2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet150 mm diameter | Each | 786.00 |
| 9.17.1 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work15 mm diameter pipe | Metre | 9.00 |
| 9.17.2 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work20 mm diameter pipe | Metre | 10.00 |
| 9.17.3 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work25 mm diameter pipe | Metre | 14.00 |
| 9.17.4 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work32 mm diameter pipe | Metre | 16.00 |
| 9.17.5 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work40 mm diameter pipe | Metre | 19.00 |
| 9.17.6 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work50 mm diameter pipe | Metre | 22.00 |
| 9.18.1 | Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality15 mm diameter pipe | Metre | 5.00 |
| 9.18.2 | Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality20 mm diameter pipe | Metre | 5.00 |
| 9.18.3 | Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality25 mm diameter pipe | Metre | 7.00 |
| 9.18.4 | Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality32 mm diameter pipe | Metre | 8.00 |
| 9.18.5 | Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality40 mm diameter pipe | Metre | 9.00 |
| 9.18.6 | Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality50 mm diameter pipe | Metre | 11.00 |
| 9.19.1 | Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality15 mm diameter pipe | Metre | 5.00 |
| 9.19.2 | Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality20 mm diameter pipe | Metre | 6.00 |
| 9.19.3 | Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality25 mm diameter pipe | Metre | 8.00 |
| 9.19.4 | Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality32 mm diameter pipe | Metre | 9.00 |
| 9.19.5 | Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality40 mm diameter pipe | Metre | 11.00 |
| 9.19.6 | Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality50 mm diameter pipe | Metre | 13.00 |
| 9.19.7 | Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality65 mm diameter pipe | Metre | 15.00 |
| 9.19.8 | Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality80 mm diameter pipe | Metre | 18.00 |
| 9.20.1 | Providing and fixing G.I. Union (ISI mark) in G.I. pipe line including cutting and threading the pipe and making long screws etc complete (new work)15 mm nominal bore | Each | 129.00 |
| 9.20.2 | Providing and fixing G.I. Union (ISI mark) in G.I. pipe line including cutting and threading the pipe and making long screws etc complete (new work)20 mm nominal bore | Each | 153.00 |
| 9.20.3 | Providing and fixing G.I. Union (ISI mark) in G.I. pipe line including cutting and threading the pipe and making long screws etc complete (new work)25 mm nominal bore | Each | 165.00 |
| 9.20.4 | Providing and fixing G.I. Union (ISI mark) in G.I. pipe line including cutting and threading the pipe and making long screws etc complete (new work)32 mm nominal bore | Each | 184.00 |
| 9.20.5 | Providing and fixing G.I. Union (ISI mark) in G.I. pipe line including cutting and threading the pipe and making long screws etc complete (new work)40 mm nominal bore | Each | 230.00 |
| 9.20.6 | Providing and fixing G.I. Union (ISI mark) in G.I. pipe line including cutting and threading the pipe and making long screws etc complete (new work)50 mm nominal bore | Each | 300.00 |
| 9.20.7 | Providing and fixing G.I. Union (ISI mark) in G.I. pipe line including cutting and threading the pipe and making long screws etc complete (new work)65 mm nominal bore | Each | 498.00 |
| 9.20.8 | Providing and fixing G.I. Union (ISI mark) in G.I. pipe line including cutting and threading the pipe and making long screws etc complete (new work)80 mm nominal bore | Each | 614.00 |
| 9.21.1 | Providing and fixing G.I. Union (ISI mark) in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required15 mm nominal bore | Each | 232.00 |
| 9.21.2 | Providing and fixing G.I. Union (ISI mark) in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required20 mm nominal bore | Each | 256.00 |
| 9.21.3 | Providing and fixing G.I. Union (ISI mark) in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required25 mm nominal bore | Each | 267.00 |
| 9.21.4 | Providing and fixing G.I. Union (ISI mark) in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required32 mm nominal bore | Each | 286.00 |
| 9.21.5 | Providing and fixing G.I. Union (ISI mark) in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required40 mm nominal bore | Each | 332.00 |
| 9.21.6 | Providing and fixing G.I. Union (ISI mark) in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required50 mm nominal bore | Each | 467.00 |
| 9.21.7 | Providing and fixing G.I. Union (ISI mark) in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required65 mm nominal bore | Each | 689.00 |
| 9.21.8 | Providing and fixing G.I. Union (ISI mark) in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required80 mm nominal bore | Each | 781.00 |
| 9.22 | Providing and placing on at all floor levels high design HDPE (polyethylene) water storage tank IS: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. C.P. BRASS FITTINGS | Ltr | 8.00 |
| 9.23.1 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893115 mm nominal bore | Each | 375.00 |
| 9.24.1 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms15 mm nominal bore | Each | 335.00 |
| 9.25.1 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms15 mm nominal bore | Each | 380.00 |
| 9.26.1 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved will quality make conforming to IS:893115 mm nominal bore | Each | 375.00 |
| 9.27.1 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore | Each | 415.00 |
| 9.28.1 | Providing and fixing C.P. brass pillar cock of approved quality and make conforming to IS: specification15 mm nominal bore 125 mm long foam flow | Each | 619.00 |
| 9.29.1 | Providing and fixing C.P. brass base and mixer of approved quality and make conforming to IS: specification15 mm nominal bore | Each | 1,905.00 |
| 9.30.1 | Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification15 mm nominal bore | Each | 2,160.00 |
| 9.31.1 | Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification15 mm nominal bore | Each | 1,905.00 |
| 9.32.1 | Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification100 mm dia | Each | 53.00 |
| 9.34 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete grade M-15 (Nominal Mix with 20mm maximum size of stone aggregate) including finishing complete so as to make it leak proof | Each | 168.00 |
| 9.35 | Making chases up to 7.5 x 7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc | Metre | 66.00 |
| 9.36 | Making chases up to 20 x 20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete grade M-10 (Nominal Mix with 20mm maximum size of stone aggregate) including disposal of malba (wastage) | Metre | 95.00 |
| 9.37.1 | Providing and making Consumer Service connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE unions 20mm dia/GI union 15 mm dia (medium class), brass/ss tap etc. all complete and all Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat and finished as per the drawing attached, testing all complete itemsFor connection with 20mm dia MDPE Pipe upto 5 meter and CONCRETE ROAD CROSSING is necessary | Each | 3,375.00 |
| 9.37.2 | Providing and making Consumer Service connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE unions 20mm dia/GI union 15 mm dia (medium class), brass/ss tap etc. all complete and all Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat and finished as per the drawing attached, testing all complete itemsFor Connection with 20mm dia MDPE Pipe more than 5 meter and CONCRETE ROAD CROSSING is necessary | Each | 3,596.00 |
| 9.37.3 | Providing and making Consumer Service connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE unions 20mm dia/GI union 15 mm dia (medium class), brass/ss tap etc. all complete and all Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat and finished as per the drawing attached, testing all complete itemsFor connection with 20mm dia MDPE pipe upto 5 meter and road crossing is not required. (Distribution pipe line is on the same side of house | Each | 2,441.00 |
| 9.37.4 | Providing and making Consumer Service connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE unions 20mm dia/GI union 15 mm dia (medium class), brass/ss tap etc. all complete and all Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat and finished as per the drawing attached, testing all complete itemsFor connection with 20mm dia MDPE pipe upto 5 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary | Each | 2,519.00 |
| 9.37.5 | Providing and making Consumer Service connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE unions 20mm dia/GI union 15 mm dia (medium class), brass/ss tap etc. all complete and all Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat and finished as per the drawing attached, testing all complete itemsFor connection with 20mm dia MDPE pipe more than 5 meter & upto 10 meter and road (Other than concrete road) crossing is necessary | Each | 2,655.00 |
| 9.38.1 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Note less than 100 gm in weight) /MDPE, ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets MDPE union 20mm dia/ GI union 15mm dia (medium class), brass /SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M- 20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 15mm dia GI pipe upto 5 meter and CONCRETE ROAD CROSSING is necessary | Each | 3,521.00 |
| 9.38.2 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Note less than 100 gm in weight) /MDPE, ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets MDPE union 20mm dia/ GI union 15mm dia (medium class), brass /SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M- 20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 15mm dia GI pipe more than 5 meter & upto 10 meter and CONCRETE ROAD CROSSING is necessary | Each | 4,063.00 |
| 9.38.3 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Note less than 100 gm in weight) /MDPE, ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets MDPE union 20mm dia/ GI union 15mm dia (medium class), brass /SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M- 20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 15mm dia GI pipe up to 5 meter and road crossing is not required. (Distribution pipe line is on the same side of house) | Each | 2,685.00 |
| 9.38.4 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Note less than 100 gm in weight) /MDPE, ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets MDPE union 20mm dia/ GI union 15mm dia (medium class), brass /SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M- 20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 15mm dia GI pipe upto 5 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary | Each | 2,907.00 |
| 9.38.5 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Note less than 100 gm in weight) /MDPE, ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets MDPE union 20mm dia/ GI union 15mm dia (medium class), brass /SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M- 20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 15mm dia GI pipe than 5 meter & upto 10 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary | Each | 3,139.00 |
| 9.39.1 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from CI/DI/GI pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Note less than 100 gm in weight) /MDPE, ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets MDPE union 20mm dia/ GI union 15mm dia (medium class), brass /SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M- 20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 20mm dia MDPE pipe upto 5 meter and CONCRETE ROAD CROSSING is necessary | Each | 3,058.00 |
| 9.39.2 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from CI/DI/GI pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Note less than 100 gm in weight) /MDPE, ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets MDPE union 20mm dia/ GI union 15mm dia (medium class), brass /SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M- 20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 20mm dia MDPE pipe more than 5 meter & upto 10 meter and CONCRETE ROAD CROSSING is necessary | Each | 3,259.00 |
| 9.39.3 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from CI/DI/GI pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Note less than 100 gm in weight) /MDPE, ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets MDPE union 20mm dia/ GI union 15mm dia (medium class), brass /SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M- 20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 20mm dia MDPE pipe upto 5 meter and road crossing is not required. (Distribution pipe line is on the same side of house | Each | 2,145.00 |
| 9.39.4 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from CI/DI/GI pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Note less than 100 gm in weight) /MDPE, ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets MDPE union 20mm dia/ GI union 15mm dia (medium class), brass /SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M- 20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 20mm dia MDPE pipe upto 5 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary | Each | 2,245.00 |
| 9.39.5 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from CI/DI/GI pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Note less than 100 gm in weight) /MDPE, ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets MDPE union 20mm dia/ GI union 15mm dia (medium class), brass /SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M- 20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 20mm dia MDPE pipe more than 5 meter & upto 10 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary | Each | 2,362.00 |
| 9.40.1 | Providing and making Consumer Service Connection (House Hold Connection) from CI/DI/GI pipe with including all labour and material such as connection clamp, brass ferrule (note less than 100 gm)/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets, union 20mm dia MDPE / 15mm dia GI pipe (medium class), brass /SS tape etc all complete and complying with the relevant BIS specifications. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 15mm dia GI pipe upto 5 meter and CONCRETE ROAD CROSSING is necessary | Each | 3,409.00 |
| 9.40.2 | Providing and making Consumer Service Connection (House Hold Connection) from CI/DI/GI pipe with including all labour and material such as connection clamp, brass ferrule (note less than 100 gm)/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets, union 20mm dia MDPE / 15mm dia GI pipe (medium class), brass /SS tape etc all complete and complying with the relevant BIS specifications. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 15mm dia GI pipe more than 5 meter & upto 10 meter and CONCRETE ROAD CROSSING is necessary | Each | 3,941.00 |
| 9.40.3 | Providing and making Consumer Service Connection (House Hold Connection) from CI/DI/GI pipe with including all labour and material such as connection clamp, brass ferrule (note less than 100 gm)/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets, union 20mm dia MDPE / 15mm dia GI pipe (medium class), brass /SS tape etc all complete and complying with the relevant BIS specifications. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 15mm dia GI pipe upto 5 meter and road crossing is not required. (Distribution pipe line is on the same side of house) | Each | 2,571.00 |
| 9.40.4 | Providing and making Consumer Service Connection (House Hold Connection) from CI/DI/GI pipe with including all labour and material such as connection clamp, brass ferrule (note less than 100 gm)/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets, union 20mm dia MDPE / 15mm dia GI pipe (medium class), brass /SS tape etc all complete and complying with the relevant BIS specifications. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 15mm dia GI pipe upto 5 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary | Each | 2,844.00 |
| 9.40.5 | Providing and making Consumer Service Connection (House Hold Connection) from CI/DI/GI pipe with including all labour and material such as connection clamp, brass ferrule (note less than 100 gm)/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets, union 20mm dia MDPE / 15mm dia GI pipe (medium class), brass /SS tape etc all complete and complying with the relevant BIS specifications. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsFor connection with 15mm dia GI pipe than 5 meter & upto 10 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary | Each | 3,022.00 |
| 9.40.6 | Providing and making Consumer Service Connection (House Hold Connection) from CI/DI/GI pipe with including all labour and material such as connection clamp, brass ferrule (note less than 100 gm)/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets, union 20mm dia MDPE / 15mm dia GI pipe (medium class), brass /SS tape etc all complete and complying with the relevant BIS specifications. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsDeduct from Item No.- 9.37 to 9.40 if platform and parapet is not constructed | Each | 436.00 |
| 9.40.7 | Providing and making Consumer Service Connection (House Hold Connection) from CI/DI/GI pipe with including all labour and material such as connection clamp, brass ferrule (note less than 100 gm)/flow control valve, double compression elbow, male/female threaded adopter with metal insert sockets, union 20mm dia MDPE / 15mm dia GI pipe (medium class), brass /SS tape etc all complete and complying with the relevant BIS specifications. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete itemsDeduct from Item No.- 9.37 to 9.40 if grouting in post not done | Each | 429.00 |
Other chapters in this schedule
- Ductile Iron Pressure Pipes and Specials with Tyton Joints and DI Valve (669)
- Polyethylene Pipe and Fittings (209)
- Galvanized Iron Pipes, Specials and Gun Metal or Brass Fittings (354)
- Oriented P.V.C. (PVC-O) Pipes (13)
- M.S. Pipes, Specials, Fittings including Fabrication & Laying (75)
- Asbestos Cement Pressure Pipes and Cast Iron Fittings (16)
- Bar Wrapped Steel Cylinder Pipes (BWSC) (270)
- Cast Iron Socket and Spigot Pipes & Specials with Lead Joints, Tyton Joints, Cast Iron Pipes & Specials with Flanged Joints, Cast Iron Valves, Sluice Gate & Air Valves (351)
- Water Hammer Devices (96)
- Pumps (172)
- Measuring Devices (40)
- Miscellaneous (Water Supply) (73)
- Allied Civil Works (82)
- Intake Well Related Works (27)
- Ground Service Reservoir & Sump Tanks (GSR) (19)
- Construction of Gravel Packed Tube Well (5)
- Development, Yield Test and Disinfection of Tube Well (6)
- Unplasticized Non-Pressure Polyvinyl Chloride (PVC-U) Pipes, Double Wall Corrugated (DWC) Pipes for Use in Underground Sewerage System (32)
- Reinforced Cement Concrete Pipes (190)
- Salt Glazed Stoneware Pipes, Sewer Appurtenances & Sewerage Maintenance (126)
Pricing consumer service connection against a live tender
Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works