Tamil Nadu SOR 2023-24

Rates for Other Construction Materials rates

194 rates for other construction materials items from the Tamil Nadu Water Supply and Drainage (TWAD) Board, effective 2024-01-23.

Rates for Other Construction Materials rates in the Tamil Nadu Water Works Schedule of Rates 2023-24 run from ₹1.08 to ₹2,98,750.00. Transcribed from Tamil Nadu TWAD Board — Standard Schedule of Rates 2023-24, effective 23 January 2024. Reference only — verify against the official source before pricing a bid.

Download the full schedule (Excel)All 11 chapters

/

194 items — scroll the table to browse

	Description	Unit
1	Water proofing compound	KG	42.70
2	Mild Steel Flats of all sizes	KG	52.10
3	Mild Steel Square Rods of all sizes	KG	52.10
6	Joint free Rectified Glazed Ceramic Flooring Tiles 305 x 305 x 8 mm	Each	57.80
12	Stain free Nano polish Vitrified Tiles 600 x 600 x 8mm	Sq.m	658.00
13	Double charged Vitrified Tiles 600 x 600 x 8mm	Sq.m	982.00
14	Double charged Vitrified Tiles 800 x 800 x 10mm	Sq.m	1,253.00
15	Pre -Polished concrete Antiskid Step Tiles of 20mm Thick	Sq.m	653.00
18	Tactile paver Type of New Tek BT Yellow colour ceramic tiles of size 305x305x15mm for vision Impairment person	Sq.m	2,040.00
22	White Cement	KG	22.60
23	Colour Cement (White cement mixed with colouring pigments)	KG	27.25
28	Flamed Steel Grey Granite Slab 1200mm x 600mm, 16mm to 18mm thick	Sq.m	1,832.00
29	Flamed Ruby Red Granite Slab 1200mm x 600mm, 16mm to 18mm thick	Sq.m	1,946.00
32	Polished shahabad stone slabs of 20 mm thick with machine cut edges of size 2' 0" x 2'0" and above	Sq.m	376.00
33	Polished shahabad stone slabs 20 mm thick with machine cut edges of size below 2' 0" x 2'0"	Sq.m	318.00
34	Polished Rajasthan Kota stone slabs of 20 mm thick with machine cut edges of size 2' 0" x 2'0" and above	Sq.m	550.00
35	Polished Rajasthan Kota stone slabs of 20 mm thick with machine cut edges of size below 2'0" x 2'0"	Sq.m	484.00
37	PVC Trims (Beading)	Rm	95.40
38	Teracota Jally of size 20x20x0.75mm	Each	38.95
39	Aluminium strips of size 40 mm wide x 1.5 mm thick	Rm	36.60
40	Brass strips of size 40 mm wide x 1.5 mm thick	Rm	69.15
41	Glass strips of size 40 mm wide and 4 mm thick	Rm	15.65
42	Marblex Tiles 3 mm thick	Sq.m	696.00
43	Red Oxide - Superior quality for floor finish	KG	145.20
44	Decorative pressed tiles of 12 mm thick of all sizes and shapes	Sq.m	1,075.00
45	Exterior Emulsion Paint - Water based primer (Liquid)	Litre	151.30
46	Alkali Resistant Distemper Primer	Litre	135.60
47	Sandtex matt	Litre	158.00
48	Vinaratex or equivalent Textured coat	Sq.m	203.90
49	Best Lac Polish / French Polish	Litre	264.10
51	Cotton Waste	KG	10.40
52	Cement based Hydraulically pressed Anti skid tiles (pattern design) - 20 mm thick	Sq.m	525.00
53	Marble Powder	KG	4.54
58	Poly Sulphide	KG	177.00
59	Primer for expansion joints	KG	152.20
60	Filler material	Sq.m	145.20
61	Bond Breaker	Rm	3.73
62	Bentonite powder for construction quality	KG	6.05
63	PVC Water Bar 150mm wide with single bulb	Rm	299.80
64	Plain G.I. sheet 0.8mm thick (22 Gauge)	Sq.m	364.60
67	G.I. Limpet / Cup Washers	Each	1.89
68	Bitumen washers 15mm dia	Each	1.13
70	A.C. shoe - 100mm dia	Each	45.70
71	A.C. Bend - 100mm dia	Each	52.30
72	A.C. Cylindrical Cowl - 100mm dia	Each	78.45
73	C.I. Brackets for A.C. pipe 100mm dia	Each	20.05
74	C.I. Grating - 100mm dia	Each	32.10
75	Asbestos cement fully corrugated sheet - 6mm thick	Sq.m	189.65
77	Supplying and fixing shade net (Green net) for under construction of high rise buildings	Sq.m	67.25
78	Asbestos cement adjustable ridges	Pair	196.45
79	G.I. "J" or "L" Bolts with nuts 6mm Dia	Each	3.91
80	Steel - special extruded sections for steel windows and ventilators conforming to I.S.S. 7452 / 1990 including Fabrication charges	KG	69.60
83	Alumninum Extruded Box Section for Staircase Hand Rails including charges for Anodising for 15 micron thickness - Natural colour matt finish	KG	390.90
84	Rubber beading for aluminium glazed doors	Rm	38.25
85	Rubber beading for aluminium glazed windows	Rm	29.05
86	PVC / Woollen felt for aluminium doors 6mm thick	Rm	7.95
87	Pivot for Aluminium Door	Set	160.70
88	Hydraulic Door closer of various sizes of approved quality using Aluminium Extruded section body tubular type universal hydraulic door closer with double speed adjustment like HARDWYN (make) 'GAZEL' (or) equivalent (with ISI Monogram)	Each	1,008.00
89	Hydraulic Floor springs of various sizes double acton hydraulic floor spring of approved quality, brand, manufacture as per BIS standards for doors including cost of cutting floors as required, embedding in to floors and Stainless Steel Cover plates with Aluminium Pivet and single piece M.S. sheet outer box with side plate etc., capable of taking upto 130 Kg. weight from door shutter, like HARDWYN make (U-32) or its equivalent with ISI monogram	Each	2,095.00
90	Lock for Aluminium doors	Each	284.50
91	Lock for Aluminium sliding windows	Each	71.10
92	Aluminium Grill of standard pattern (diamond shape) - 10mm thick including 'F' (or) 'H' Section	Sq.m	2,079.00
93	Aluminium Grill of standard pattern (diamond shape) - 6mm thick including 'F' (or) 'H' Section	Sq.m	1,679.00
94	Bolts and Nuts 10mm dia for false ceiling	Each	5.65
95	Rawl Plugs for false ceiling	Each	9.50
96	PVC Roller for sliding windows	Each	14.60
97	Synthetic Resin - Fevicol or equivalent (Phenol Formaldehide based Resin)	KG	199.75
103	Steel door/ Window fittingsWindow stay	Each	156.90
104	Stopper and handle	Each	145.70
113	Aluminium door stopper with rubber bush with required screws	Each	49.55
114	Rubber bush - 40 mm dia and 60 mm long with required screws	Each	23.10
119	Medium Density Fibre (MDF) Board - Exterior Grade, Both sides pre-laminated including external lipping with kiln dried soft wood 35mm thick	Sq.m	2,180.00
120	Medium Density Fibre (MDF) Board - exterior Grade - Both sides pre-laminated, 12mm thick	Sq.m	1,050.00
125	Solid core Flush shutters with Teak ply on one side and commercial ply on other side with teak wood lipping alround 35 mm thick	Sq.m	1,982.00
126	Solid core Flush shutters with commercial ply on both side with teak wood lipping alround 35 mm thick	Sq.m	1,698.00
127	Providing cup board Shutter with frame using termite/ water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed outside the shutter using fevicol along with necessary furniture fittings such as hydraulic hinges tower bolt handles multi purpose locks etc as directed by the Departmental officers. The design pattern water proof plywood laminate sheet and other materials should be got approved from the Executive Engineer before use on work	Sq.m	5,047.00
129	Supplying and fixing of PVC sliding door with roller	Sq.m	3,562.00
131.a	PVC panelled door shutters hollow type - 200 mm x 20 mm panels with 1 mm wall thickness for panels and styles and rails of suitable size with 2 mm wall thickness suitably reinforced using MS Angle / Flat including cost of necessary Aluminium hinges and other furniture fittings	Sq.m	2,135.00
132	RCC door frame of 100mm x 65mm cross sectional size with necessary rebate for housing the shutters, manufactured with cement concrete of grade not less than M20 using 10 mm and below graded stone jelly and using steel reinforcement as per C.E. (B) circular instructions	Rm	279.70
133	Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1 mm thick) of size 100 mm x 60 mm with a rebate of 30/ 35 mm x 15 mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel Hold fast etc.,	Rm	918.00
134	Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size100mmx60mm with a rebate of 30/ 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc.,	Rm	1,241.00
137	Chain link - 2" x 2" using 10 Gauge Galvanised Iron Wire (of all sizes)	Sq.m	160.25
138	Pin Headed / Fluted / Figured Glass 3mm thick	Sq.m	226.60
139	ROLLING GRILLS (WITH ISI MONOGRAM)Plain Glass - 4mm thick	Sq.m	306.90
140	ROLLING GRILLS (WITH ISI MONOGRAM)Plain Sheet Glass - 5.5mm thick	Sq.m	362.50
142	ROLLING GRILLS (WITH ISI MONOGRAM)Cement paint (First quality)	KG	49.85
143	ROLLING GRILLS (WITH ISI MONOGRAM)Oil Bound Distemper	KG	73.80
144	ROLLING GRILLS (WITH ISI MONOGRAM)Acrylic Distemper	KG	85.20
145	ROLLING GRILLS (WITH ISI MONOGRAM)Primer for Plastic Emulsion paint	Litre	147.50
146	Plastic Emulsion paint (First quality)	Litre	295.60
147	ROLLING GRILLS (WITH ISI MONOGRAM)Wood Primer	Litre	147.50
148	Synthetic Enamel paint for Wood work	Litre	238.90
149	Red Oxide primer for Iron work	Litre	136.90
150	Synthetic Enamel paint for Iron work	Litre	227.60
151	Melanine polish	Sq.m	648.00
152	Exterior Emulsion Paint	Litre	303.80
153	Painting the wall with texture finish paint including labour charges	Sq.m	412.00
154	White wall putty powder	KG	27.45
155	Sand paper ( Water proof abrasive sheet)	Each	10.20
158	Brass chromium plated screw down Tap 15 / 12mm Dia (Heavy Type)	Each	206.00
159	Brass chromium plated pillar Tap (Heavy type)- 15/12mm Dia	Each	269.00
161	PVC screw down tap Heavy type 15mm dia	Each	72.40
162	Chromium plated stop cock 15mm Dia	Each	151.30
163	Brass chromium plated shower Rose - 100mm Dia	Each	194.60
164	CP wall mixture tap 3 in 1 system with hand showers	Each	4,146.00
165	CP two way bib cock with health faucet	Each	2,060.00
166	CP Shower Arm with Overhead shower rose	Each	1,181.00
167	Wooden plug, clamp and screws	Set	12.20
172	Vajjram for heritage works	KG	78.45
174	CP Heavy duty Bottle trap 32mm	Each	1,105.00
175	CP Angle cock tap	Each	776.00
180	SS Elbow Action tap of size 15mm	Each	1,545.00
181	SS Heavy Duty long body tap 15mm	Each	1,545.00
182	SS Swan Neck Tap	Each	1,030.00
184	White Porcelin Sink of size 600mm x 450mm x 200mm with 32mm dia 'B' Class G.I. waste water pipe and 32mm dia C.P. waste coupling	Set	2,147.00
185	Cuddapah Slab Sink of size 600mm x 450mm x 200mm with 32mm dia 'B' Class G.I. waste water pipe & 32mm dia C.P. waste coupling	Set	769.00
186	Cuddapah Slab Sink of size 600mm x 600mm x 200mm with 32mm dia 'B' Class G.I. waste water pipe & 32mm dia C.P. waste coupling	Set	1,020.00
189	Supplying and fixing of SS Sink of size 1200x550x180mm	Each	18,540.00
190	Supplying and fixing of Granite Sink of size 600x600x250mm	Each	4,141.00
192	Supplying and fixing of Oval shape wash hand basin of size 560x450mm	Each	2,899.00
193	Supplying and fixing of white glazed porcelain oval shape special type Urianal of size 382 x 398 x 601mm	Each	10,060.00
195	Brass chromium plated soap tray of size 150mm x 100mm	Each	165.10
196	Brass chromium plated towel rail 60cm long and 20mm dia with Brackets	Set	269.00
197	SS Towel rack 600mm long with lower hanger	Each	1,545.00
198	Anodised Aluminium Towel Rail 60cm long and 20mm dia with Brackets	Set	145.15
200	Special type Mirror of size 1000x780mm	Each	2,575.00
201	Stone ware gully trap of size 150mm x 100mm with cast Iron Double Gratings	Each	170.35
206	Gunny Tape / Kithan	Sq.m	11.80
208	Bitumen Felt 15 mm thick pad	Sq.m	234.30
213	Supply of laying of Anutone (or) Equivalent Brand of Acoustical Insulation of Sound Synth Polywool, 50mm thick made from recycled poly fibre and fully recyclable, surface density 1000 g / m2, weight 1.0 kg / m2 in form of rolls of 600mm wide and 15m in length, adhered to surface with stick S7 adhesive or held in position with chicken wire mesh etc., complying to standard specication	Sq.m	428.00
214	Providing Polymer coating (water proof coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose material or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thouroughly until no bubbles remain in the mix. Any lumps found shall be removed. Apply first coat of polymer modified cementatitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers. The rate inclusive of cost of materials and labour etc., complete	Sq.m	329.00
215	Providing Cornice work for Gyp Board false ceiling	Rm	190.40
217	Termite proof/ water proof plywood 19mm thick	Sq.m	1,339.00
218	Laminated sheet 0.8mm thick (inside)	Sq.m	246.40
219	Laminated sheet 1mm thick (outside)	Sq.m	412.00
220	Squatting Urinal	Set	454.50
221	CI Brackets for fixing the sink	Set	107.90
222	Swan Neck Tap	Each	252.50
223	Brass Screws (30 x 6 mm)	Each	2.41
224	Brass Screws (75 x 10 mm)	Each	4.88
225	Special clamp, teak wood plugs and screws	Set	21.60
226	PVC Clamp, teak wood plugs and screws	Set	8.50
227	Teak Wood plug	Each	1.08
228	Teak wood plug (50 x 50 x 100 mm)	Each	5.40
229	Manhole cover 60 x 60 cm (heavy duty) with frame	Each	1,864.00
232	Labour charges for fixing cuddapah slab to cup board	Sq.m	45.95
233	Hire charges for polishing machinery	Day	228.60
236	PVC Mould CI steps for sump	Each	230.20
238	Stainless steel Health faucet	Each	1,013.00
239	High Density Fibre (HDF) Board	Sqm	2,210.00
241	Designing the Semi Unitised Structural Glazing System with open groove joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept. Officials.) Design the framing system (1.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composite panel, openable, window panels on a continuous framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the system both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere	Sqm	4,841.00
243	Providing strong room for door for sub treasuries	Each	2,98,750.00
250	Pre-Painted Galvanized Iron Door Frame: Providing and fixing door frames from sections made of galvanized steel powder coated (Base steel as per IS 513 'D' quality, galvanized as per IS 217 with zinc of 120 grams/sqm.). The factory made section should be with a powder coating of pure polyester powder of 50-60 microns thick with total coated thickness of 1.25mm. Size of door frame section should be of 105 x 60mm with a rebate of 37mm to accommodate 35mm thick door shutter. The frame section should have groove to insert gasket. 2 tie rods of 10mm tor steel to be provided at bottom. Provision for aldrop, mortise lock to be made in the section as per the instruction of Engineer-in-Charge. The frame section should be cut to length, and joined by way of welding. Note: 1.25mm thick (Total coated thickness tolerance as per IS 513)	Rm	595.00
253	Pre-painted Galvanized Iron Fixed Louvered Ventilators with Glass, Mesh and Grill: Providing and fixing louvered ventilator fabricated from roll formed sections made of galvanized steel colour coated/powder coated (Base Steel as per IS 513 of 'D' quality, Galvanized as per IS 277 with Zinc of 120 grams/ sqm.) with total coated thickness of 0.58 mm Paint specification: Coated sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and black coated with alkyd backer of 5-7 microns. Dimensions of section: The section for external frame should be of 57 x 33mm. Fixing details: The section should be cut to length and joined with profile to profile component. Accessories: Glass holding flanges made of glass filled nylon. Glass: Louvers should be provided with 4 mm thick pinhead glass. Mesh: Mesh should be provided with a SS 32 gauge fly mesh of 304 grades with 144 holes per square Inch. Grill: Ventilator should be provided with grill made of 10mm square MS bars welded to12mm x 5mm flat at 4" intervals. Total grill unit should be powder coated and fixed to window frame with screws. The above frames should be fixed to concrete / masonry walls and floor by means of self expanding screws	Sqm	5,250.00
256	UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work	Sqm	8,106.00
257	FOAMED PVC DOOR FRAME Specification: Providing factory made pre-laminated FPVC (Formed Polyvinyl Chloride) Door Frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 5mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 Nos. to be provided for each vertical member, GI stiffeners of ('U' channel of size 29 x 9, 1mm, 150mm long) 3 Nos. at hinge point, frame reinforcement of ('U' GI channel of size 46 x 22 x 0.6mm), bottom tie rod of ('U' GI channel size of 15 x 15 x 1mm), etc., complete complying with the standard specification. The door frame should be got approved from the Executive Engineer before use on work	Rm	530.00
260	Plasticizer/ Super Plasticizer	KG	43.20
262	Supplying and Installing Metal False Ceiling using Fire Retardant Galvanized Steel Sheet Plain lay in tile size 600mm x 600mm, 0.5mm thick, powder coated on external surface and shall have flange on all four sides to rest on the exposed grids. The system to give 600mm x 600mm centre to centre 'T'. The 'T' shall be not be dipped GI Tee Section 3600mm long main Tee. 24mm wide and cross Tee panels are formed by running main runner of 'T' section of size 30mm x 24mm powder coated at bottom at intervals with powder coating at bottom. Necessary provision of inter locking of 'T' section are made at required intervals not exceeding 1200mm. The main runners are suspended from the ceiling by means of 4mm dia. GI rods fixed to the ceiling using anchor fasteners of 50mm x 8mm size with nylon inset and hooked to the main rubbers using clips. The last hangers at end of each rubber should not be greater than 600mm from the adjacent wall. The last panel shall be placed at the side wall using edge profile 'L' Angle of size 20mm x 20mm and fixed to the side wall the false ceiling should be fixed of same level and should present a neat look	Sqm	3,151.00
263	Supplying and fixing of SS Wall Cladding	Sqm	12,875.00
264	Supplying and fixing of SS False Ceiling	Sqm	7,726.00
270	Emblem (15")	Each	12,975.00
273	Supplying and fixing the Wall Panelling with the following specification fixing horizontally and vertically in position of wall. Fixing the water proof ply wood 9mm thick board over the country wood planks. Over the ply wood OST sheet of 4mm thick will be fixed with necessary screws and fevicol giving neat finsih. The top will be finished with two coats of sanding polishing.The surface will be finished with necessary design as directed by the Departmental Officers. The rate Inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmetnal Officers. The water proof ply wood and OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification	Sqm	5,406.00
274	Supplying and installation of Anutone / Topakustiks / Idea Tec/ Wood Fit / Equivalent Brand of Acoustic Wooden Wall Panelling with fire retardant grade pine wood fibre slats of size 2430 x 128 x 16mm with lineal perforation of 2mm back lined with soundtex black acoustical fleece 0.27mm thick, 63 g/ m2, tongue- groove edge for a seamless look, 5 test fire retardant grade with noise reduction coefficient not less than 0.75 NRC to absorb low and mid range frequencies from 125Hz to 4000Hz. GI strut CC50 frame work not more than 60 cm centre to centre using GI channels are fixed on the wall, over which an acoustic filling polywool material sound synth of 500 gsm density of 50mm thick has fixed and finally the panels are fixed and finished, so as to have an neat appearance as directed by the departmental offices. The cost includes cost of material, cost of Labours, scaffolding, transportation, conveyance, etc., complete complying to standard specification	Sqm	5,508.00
278	Providing and fixing of 1.2mm thick Lead Lining Door for X-Ray Rooms, Scanning Rooms with Mild Steel Door Frames 105mm x 57mm X 18 G and 12 G x 50mm Shutter made of GI with PWG finish and honey wool insulations with SS 101mm x 75mm x 3mm SS 304 Ball Bearings Butt Hinges, Mortice Sash Lock ML 100A, 50mm BS, 85mm centre, CL 207: Key & Knob 70mm, 5 Pin Cylinder with Handle SS Finish (Dorma Make), Heavy Duty Door Closer, Frames fixed wih walls using Mortice Sash Lock ML 100A, 50mm BS, 85mm centre CL207: Key & Knob 70mm, 5 Pin Cylinder with Handle SS Finish (Dorma Make) all neccesary accessories and fittings as per the required and as per the approval for the Department Officer	Sqm	14,059.00
280	Supplying, fabricating and fixing in position factory made Stainless Steel Flush Door Shutter 35mm thick using SS 304 Grade 1.6 mm thick, Stainless Sheets on both sides (Equivalent to 1S 6911-04 Cr. 19, NI 9) minimum 8-8.5% nickel and 18% chromium sourced from original stainless steel manufacturer with view panel size 30mm x 45mm made up of 6mm thick clear toughened glass fitted with double side adhesive tape and finished with dowconing silicon sealant, floor spring for each shutter, consealed tower bolt, sultable stainless steel locking arrangement and other necessary furniture fittings of approved quality. The vertical styles and other frame members and cross stiffeners shall be of same quality stainless steel box section of suitable size and thickness with proper core material as prescribed by the Departmental Officers	Sqm	37,743.00
282	Incinerators for Ladies bathroom (for school works)	Each	34,570.00
283	Polycarbonate sheet 6mm thick	Sqm	648.00
284	Galvalume colour shet of size 0.47mm	Sqm	434.00
a	Single Nosing	Rm	195.70
a	Natural colour matt finish	KG	325.00
a	One side melamine finish	Sq.m	1,111.00
a	Solid panel PVC door with frame	Sq.m	3,325.00
a	ROLLING SHUTTERS (WITH ISI MONOGRAM)Manually operated (up to 8 m2 area)	Sq.m	2,171.00
a	White - 10 litre capacity	Set	995.00
a	Plain Pre laminated door	Sqm	5,946.00
a	Aluminium Dye Cast Letters 9" size	Each	1,179.00
b	Double Nosing	Rm	370.25
b	Both sides melamine finish	Sq.m	1,251.00
b	Solid panel PVC door without frame	Sq.m	2,800.00
b	ROLLING SHUTTERS (WITH ISI MONOGRAM)Gear operated type (from 8 m2 to 12 m2 area)	Sq.m	2,419.00
b	ROLLING GRILLS (WITH ISI MONOGRAM)Gear operated (from 8 m2 to 12 m2 area)	Sq.m	2,492.00
b	White - 7.5 litre capacity	Set	760.00
b	Design Pre laminated door	Sqm	6,273.00
b	Aluminium Dye Cast Letters 6" size	Each	748.00
c	ROLLING SHUTTERS (WITH ISI MONOGRAM)Electrically operated type (exceeding 12m2 area)	Sq.m	2,626.00
c	ROLLING GRILLS (WITH ISI MONOGRAM)Electrically operated (exceeding 12 m2 area)	Sq.m	2,770.00
d	Fine polished Steel Grey Granite Slab 1200mm x 600mm, 16mm to 18mm thick	Sq.m	1,512.00
d	Colour - 7.5 litre capacity	Set	895.00
e	Fine polished Blue Pearl Granite Slab 1200mm x 600mm, 16mm to 18mm thick	Sq.m	7,571.00
e	PVC water tank	Litre	10.05
i	White without pedastal	Set	1,672.00
ii	White with pedastal	Set	2,012.00
iii	Colour without pedastal	Set	2,239.00
iv	Colour with pedastal	Set	2,477.00

Other chapters in this schedule

Pricing rates for other construction materials against a live tender

Mapping a tender BOQ to the right schedule items, applying the current cost index, and catching where rates have moved since the base edition is slow and easy to get wrong. Arched's estimation engine reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works