CPWD Analysis of Rates · Dismantling and Demolishing
Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres
Of sectional area below 40 square centimetres
- Item number
- 15.16.2
- Analysis basis
- Detail of cost for 10 metre for every additional
- Priced inputs
- 3
- Derived rate
- ₹3.40 / metre per metre height
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 15.16.2 — Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : Of sectional area below 40 square centimetres — is derived from 3 priced inputs for 10 metre and works out to ₹3.40 per metre per metre height after water charges, GST, CPOH and cess. The full build-up is below.
- height of 1 metre
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 0103 | Blacksmith 2nd classLabour | day | 0.01 | 816.00 | 8.16 |
| 0114 | BeldarLabour | day | 0.02 | 736.00 | 14.72 |
| 9999 | SundriesMaterial | L.S. | 0.39 | 2.27 | 0.89 |
- TOTAL
- 23.77
- Add 1 % Water charges on “W”
- 0.24
- TOTAL
- 24.01
- Add GST on “X” (multiplying factor 0.2127)
- 5.11
- TOTAL
- 29.12
- Add 15% CPOH on “Y”
- 4.37
- TOTAL
- 33.49
- Add Cess @ 1% on “Z”
- 0.33
- Cost of 10.00 metre per metre height
- 33.82
- Cost of 1.00 metre per metre height
- 3.38
- Say
- 3.40
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1111. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works