Skip to main content

CPWD Analysis of Rates · Wood and PVC Work

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

250x10 mm

Item number
9.97.2
Analysis basis
Details of cost for 10 nos.
Priced inputs
4
Derived rate
115.15 / no

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 9.97.2 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm — is derived from 4 priced inputs for 10 nos and works out to ₹115.15 per no after water charges, GST, CPOH and cess. The full build-up is below.

CodeInputUnitQuantityRate (INR)Amount (INR)
0699Anodised Aluminium tower bolt (barrel type)250x10 mmAnodised Aluminium tower bolt (barrel type) 250x10 mmMaterial10 Nos1505.00505.00
0587Chromium plated Brass screws 30 mmMaterial100 Nos0.8228.00182.40
9977Carriage of materialsMaterialL.S.4.422.2710.03
0111Carpenter 1st classLabourday0.125897.00112.13
TOTAL
809.56
Add 1 % Water charges on “W”
8.10
TOTAL
817.66
Add GST on “X” (multiplying factor 0.2127)
173.92
TOTAL
991.58
Add 15% CPOH on “Y”
148.74
TOTAL
1,140.32
Add Cess @ 1% on “Z”
11.40
Cost of 10 nos
1,151.72
Cost of 1 no
115.17
Say
115.15

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 566. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works