CPWD Analysis of Rates · Wood and PVC Work

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

200x10 mm

CPWD DAR 2023›Wood and PVC Work

Item number: 9.97.3
Analysis basis: Details of cost for 10 nos.
Priced inputs: 4
Derived rate: ₹99.70 / no

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 9.97.3 — Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm — is derived from 4 priced inputs for 10 nos and works out to ₹99.70 per no after water charges, GST, CPOH and cess. The full build-up is below.

Code	Input	Unit	Quantity	Rate (INR)	Amount (INR)
0700	Anodised Aluminium tower bolt (barrel type) 200x10 mmMaterial	10 Nos	1	400.00	400.00
0587	Chromium plated Brass screws 30 mmMaterial	100 Nos	0.8	228.00	182.40
9977	Carriage of materialsMaterial	L.S.	2.73	2.27	6.20
0111	Carpenter 1st classLabour	day	0.125	897.00	112.13

TOTAL: 700.73
Add 1 % Water charges on “W”: 7.01
TOTAL: 707.74
Add GST on “X” (multiplying factor 0.2127): 150.54
TOTAL: 858.28
Add 15% CPOH on “Y”: 128.74
TOTAL: 987.02
Add Cess @ 1% on “Z”: 9.87
Cost of 10 nos: 996.89
Cost of 1 no: 99.69
Say: 99.70

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 567. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works