Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick (weight not less than 10 kg per sqm)
- Item number
- 9.52
- Analysis basis
- 1 sqm
- Priced inputs
- 2
- Derived rate
- ₹155.10/ SQM
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 9.52 (Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick (weight not less than 10 kg per sqm)) is derived from 2 priced inputs for 1 sqm and works out to ₹155.10 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- Difference of cost
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 1021 | MAT | Hard drawn steel wire fabricHard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 kg/sqm | sqm | 1 | 430.00 | 430.00 |
| 2406 | MAT | Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm)Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) | sqm | -1 | 321.00 | -321.00 |
- TOTAL
- 109.00
- Add 1 % Water charges on “W”
- +1.09
- TOTAL
- 110.09
- Add GST on “X” (multiplying factor 0.2127)
- +23.42
- TOTAL
- 133.51
- Add 15% CPOH on “Y”
- +20.03
- TOTAL
- 153.54
- Add Cess @ 1% on “Z”
- +1.54
- Extra cost for 1 sqm.
- 155.08
- SAY
- ₹155.10
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 507
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 507. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.