Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide
- Item number
- 9.44.1
- Analysis basis
- a pelmet
- Priced inputs
- 1
- Derived rate
- ₹38.70/ METRE
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 9.44.1 (Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide Non decorative veneer on both sides) is derived from 1 priced inputs for a pelmet and works out to ₹38.70 per metre after water charges, GST, CPOH and cess. The full build-up is below.
- (i) 18mm thick particle board (medium density
- exterior grade)
- Front-1x1.7x0.15= 0.255sqm.+
- Sides-2x0.15x0.15= 0.045sqm.
- Total = 0.300sqm.+
- Total = 0.315sqm. Say 0.32 sqm.
- Add wastage @5% = 0.015sqm.
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 0347 | MAT | Extra for veneered particle board with Commercial veneering on both sides | sqm | 0.32 | 170.00 | 54.40 |
- TOTAL
- 54.40
- Add 1 % Water charges on “W”
- +0.54
- TOTAL
- 54.94
- Add GST on “X” (multiplying factor 0.2127)
- +11.69
- TOTAL
- 66.63
- Add 15% CPOH on “Y”
- +9.99
- TOTAL
- 76.62
- Add Cess @ 1% on “Z”
- +0.77
- Cost of 2m
- 77.39
- Cost of 1 metre
- 38.70
- SAY
- ₹38.70
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 497
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 497. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.