CPWD Analysis of Rates · Wood and PVC Work
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete
100mm
- Item number
- 9.165.2
- Analysis basis
- Details of cost for ten nos (100 mm)
- Priced inputs
- 4
- Derived rate
- ₹90.45 / ten nos
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 9.165.2 — Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete 100mm — is derived from 4 priced inputs for ten nos and works out to ₹90.45 per ten nos after water charges, GST, CPOH and cess. The full build-up is below.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 0553 | Stainless steel fancy handles (100mm) for kitchen cabinet100 mm SS fancy handles for kitchen cabinetMaterial | 10 Nos | 1 | 508.00 | 508.00 |
| 8214 | SS screws 20mmStainless steel screws 20 mmMaterial | Nos. | 0.4 | 175.00 | 70.00 |
| 9999 | Carriage of materialMaterial | L.S. | 1.82 | 2.27 | 4.13 |
| 0111 | Carpenter 1st classLabour | day | 0.06 | 897.00 | 53.82 |
- TOTAL
- 635.95
- Add 1 % Water charges on “W”
- 6.36
- TOTAL
- 642.31
- Add GST on “X” (multiplying factor 0.2127)
- 136.62
- TOTAL
- 778.93
- Add 15% CPOH on “Y”
- 116.84
- TOTAL
- 895.77
- Add Cess @ 1% on “Z”
- 8.96
- Cost for 10nos
- 904.73
- Cost for1 no
- 90.47
- Say
- 90.45
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 704. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works