Skip to main content

CPWD Analysis of Rates · Wood and PVC Work

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -incharge

Item number
9.141
Analysis basis
Details of cost for one door frame of 5 metre
Priced inputs
4
Derived rate
573.45 / metre

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 9.141 Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -incharge — is derived from 4 priced inputs for one door and works out to ₹573.45 per metre after water charges, GST, CPOH and cess. The full build-up is below.

CodeInputUnitQuantityRate (INR)Amount (INR)
8014Factory made door frame of size 50x47mm with wall thickness 5 mm made of single piecs extruded profileFactory made door frame of size 50x47 mm with wall thickness 5 mm made of single piece extruded profileMaterialmeter5350.001,750.00
0156Carpenter (average)Labourday0.15857.00128.55
0114BeldarLabourday0.15736.00110.40
9999SundriesMaterialL.S.11.652.2726.45
TOTAL
2,015.40
Add 1 % Water charges on “W”
20.15
TOTAL
2,035.55
Add GST on “X” (multiplying factor 0.2127)
432.96
TOTAL
2,468.51
Add 15% CPOH on “Y”
370.28
TOTAL
2,838.79
Add Cess @ 1% on “Z”
28.39
Cost of 5 metres
2,867.18
Cost of 1 metre
573.44
Say
573.45

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 622. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works