Skip to main content

CPWD Analysis of Rates · Structural Glazing Aluminium Composite Panel

Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete

Item number
25.5
Analysis basis
Details of cost for 3.23 sqm
Priced inputs
8
Derived rate
2,159.65 / sqm

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 25.5 Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete — is derived from 8 priced inputs for 3.23 sqm and works out to ₹2,159.65 per sqm after water charges, GST, CPOH and cess. The full build-up is below.

  • Width of the unit = 0.86 m
  • Height of the unit = 3.75 m
  • Area = 3.23 sqm
  • Area including wastage @5 % = 3.39
CodeInputUnitQuantityRate (INR)Amount (INR)
2626Glass wool Denisity 48 Kg / m3 with Black Glass Tissue (BGT)Glass wool of denisity @ 48 Kg / cum with black glass tissue (BGT)Materialsqm3.39258.00874.62
2634GI/Aluminium Sheet (0.8 mm thick)Materialkg21.356.001,192.80
2627SS Screws - # 8 x 19Materialeach328.00256.00
2628Weather Sealant - DC 789Materialcartridge2127.00254.00
2629Cement BoardMaterialsqm3.39251.00850.89
9999Sundries with clips & adhesivesMaterialL.S.308.52.27700.30
9999Sundries (For Fabrication)MaterialL.S.170.642.27387.35
9999Sundries (For Installation)MaterialL.S.170.642.27387.35
TOTAL
4,903.31
Add 1 % Water charges on “W”
49.03
TOTAL
4,952.34
Add GST on “X” (multiplying factor 0.2127)
1,053.36
TOTAL
6,005.70
Add 15% CPOH on “Y”
900.86
TOTAL
6,906.56
Add Cess @ 1% on “Z”
69.07
Cost for 3.23 sqm
6,975.63
Cost for 1 sqm
2,159.64
Say
2,159.65

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1901. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works