Skip to main content

Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin-Charge

Item number
25.4
Analysis basis
1.76 sqm
Priced inputs
12
Derived rate
₹3,671.50/ SQM
D-01/RATE ANALYSISITEM 25.4

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 25.4 (Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin-Charge) is derived from 12 priced inputs for 1.76 sqm and works out to ₹3,671.50 per sqm after water charges, GST, CPOH and cess. The full build-up is below.

NOTES
  • Width of the unit 1.6 m
  • Shuttter Weight
  • Height of the unit 1.1 m
  • Outer glass 6 mm
  • Area 1.76 sqm
  • Inner glass 6 mm
  • Aluminium Weight per sqm 7.78 Kg
  • Al weight = 1.76x7.78 = 13.7 Kg
  • No of Locking Point 4 no Total 67 Kg
  • Wedge Block 1 no
ANALYSIS OF RATES · ITEM 25.4DETAILS OF COST FOR 1.76 SQM
CodeTypeInputUnitQuantityRate (INR)Amount (INR)
2619MATExtra for 6 mm thick clear heat strengthened glasseach3134.00402.00
2611MATEPDM Gasket in Kg (Above 60 g / m)kg0.8163.00130.40
2614MATSS Screws of sizes for structural glazing / ACP Claddingeach495.00245.00
2615MATProtective Tapemetre1.7623.0040.48
2620MATARMS GS HD -TOP HUNG -20”-TYPE P-COUPLEARMS GS HD - Top Hung -20”- Type P- Couplepair11,416.001,416.00
2621MATConnection BlockConnection Block for vision glass paneleach237.0074.00
2622MATCurtain wall strikerCurtain wall striker for vision glass paneleach489.00356.00
2623MATAdjustable Fastening PawlAdjustable Fastening Rawl for vision glass paneleach437.00148.00
2624MATCorner driveCorner drive for vision glass paneleach2267.00534.00
2625MATTop wedge BlockTop wedge Block for vision glass paneleach1124.00124.00
9999MATSundriesL.S.1182.27267.86
9999MATSundries (For Fabrication)L.S.354.362.27804.40
BUILD-UP TO RATE
TOTAL
4,542.14
Add 1 % Water charges on “W”
+45.42
TOTAL
4,587.56
Add GST on “X” (multiplying factor 0.2127)
+975.77
TOTAL
5,563.33
Add 15% CPOH on “Y”
+834.50
TOTAL
6,397.83
Add Cess @ 1% on “Z”
+63.98
Cost for 1.76 sqm
6,461.81
Cost for 1 sqm
3,671.48
SAY
₹3,671.50
D-02/SOURCEPRINTED PAGE 1900
PUBLISHED BY
Central Public Works Department (CPWD)
EDITION
DAR 2023 · Delhi
EFFECTIVE
2023-09-14Both volumes are dated 14 September 2023 on their title pages.
RETRIEVED
2026-09-08
GST
18%, added in each item's build-up
PRINTED PAGE
1900

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1900. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

D-03/ADJACENT ITEMSSTRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL
ARCHED / ESTIMATING

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.