Providing, assembling and supplying vision glass panels (IGUs) comprising of hermeticallysealed 6-126 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.250.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement
- Item number
- 25.3
- Analysis basis
- 6.72 sqm
- Priced inputs
- 5
- Derived rate
- ₹3,718.70/ SQM
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 25.3 (Providing, assembling and supplying vision glass panels (IGUs) comprising of hermeticallysealed 6-126 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.250.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement) is derived from 5 priced inputs for 6.72 sqm and works out to ₹3,718.70 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- Width of the unit 1.6 m
- Height of the unit 4.2 m
- Area of Single Unit 6.72 sqm
- Area of Glass deducting area of gap/grove 5%
- = 6.38 sqm
- Vision Height 2.2 m
- Wastage 10% = 0.638 sqm say 0.7 sqm
- Net = 7.02 sqm
- Total Area 6.72 sqm, No of Panels 1 no
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 2617 | MAT | 6 mm thick High performance glass | sqm | 7.02 | 1,056.00 | 7,413.12 |
| 2618 | MAT | 6 mm thick clear heat strengthened glass | sqm | 7.02 | 679.00 | 4,766.58 |
| 9999 | MAT | Sundries (for insurance Charges) | L.S. | 126.27 | 2.27 | 286.63 |
| 9999 | MAT | Sundries ( Fabrication charges including silicon sealant, baker rod, desecant etc | L.S. | 2,120.13 | 2.27 | 4,812.70 |
| 9999 | MAT | Transporation including loading and unloading | L.S. | 126.27 | 2.27 | 286.63 |
- TOTAL
- 17,565.66
- Add 1 % Water charges on “W”
- +175.66
- TOTAL
- 17,741.32
- Add GST on “X” (multiplying factor 0.2127)
- +3,773.58
- TOTAL
- 21,514.90
- Add 15% CPOH on “Y”
- +3,227.24
- TOTAL
- 24,742.14
- Add Cess @ 1% on “Z”
- +247.42
- Cost for 6.72 sqm
- 24,989.56
- Cost for 1 sqm
- 3,718.68
- SAY
- ₹3,718.70
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 1900
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1900. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.