Skip to main content

CPWD Analysis of Rates · Sanitary Installations

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Item number
17.60.2.3
Analysis basis
Detail of cost for one no.
Priced inputs
2
Derived rate
591.40 / one no

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 17.60.2.3 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 — is derived from 2 priced inputs for one no and works out to ₹591.40 per one no after water charges, GST, CPOH and cess. The full build-up is below.

CodeInputUnitQuantityRate (INR)Amount (INR)
7643Hubless centrifugally cast (spun) iron trap with 100 mm inlet and 75 mm outlet as per IS 15905Materialeach1385.00385.00
9977Carriage of materials and fixing chargesMaterialL.S.13.522.2730.69
TOTAL
415.69
Add 1 % Water charges on “W”
4.16
TOTAL
419.85
Add GST on “X” (multiplying factor 0.2127)
89.30
TOTAL
509.15
Add 15% CPOH on “Y”
76.37
TOTAL
585.52
Add Cess @ 1% on “Z”
5.86
Cost of each
591.38
Say
591.40

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1375. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works