Skip to main content

CPWD Analysis of Rates · Sanitary Installations

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I./ C.I. Pipes

75 mm dia pipe

Item number
17.36.1
Analysis basis
Details of cost for 4 joints
Priced inputs
3
Derived rate
168.20 / joint

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 17.36.1 Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe — is derived from 3 priced inputs for 4 joints and works out to ₹168.20 per joint after water charges, GST, CPOH and cess. The full build-up is below.

CodeInputUnitQuantityRate (INR)Amount (INR)
9999Cement mortar, spun yarn etc.MaterialL.S.6.892.2715.64
0116Fitter (grade 1)Labourday0.28897.00251.16
0114BeldarLabourday0.28736.00206.08
TOTAL
472.88
Add 1 % Water charges on “W”
4.73
TOTAL
477.61
Add GST on “X” (multiplying factor 0.2127)
101.59
TOTAL
579.20
Add 15% CPOH on “Y”
86.88
TOTAL
666.08
Add Cess @ 1% on “Z”
6.66
Cost of 4 joints
672.74
Cost of 1 joint
168.19
Say
168.20

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1332. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works