Skip to main content

CPWD Analysis of Rates · Sanitary Installations

Providing and fixing soil, waste and vent pipes : 100 mm dia

Sand cast iron S&S pipe as per IS: 1729

Item number
17.35.1.1
Analysis basis
Details of cost for 17.37 m
Priced inputs
6
Derived rate
1,151.90 / m

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 17.35.1.1 Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 — is derived from 6 priced inputs for 17.37 m and works out to ₹1,151.90 per m after water charges, GST, CPOH and cess. The full build-up is below.

  • (1.8mx10)-(9x0.07m) = 17.37 m
CodeInputUnitQuantityRate (INR)Amount (INR)
1617S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 100mm diaS.C.I. soil, waste and vent single socketed pipe 1.80 metres long:100 mm diaMaterialeach10.51,200.0012,600.00
9999ScaffoldingMaterialL.S.80.732.27183.26
9977Carriage of materialsMaterialL.S.53.822.27122.17
0116Fitter (grade 1)Labourday0.42897.00376.74
0100BandhaniLabourday0.21816.00171.36
0114BeldarLabourday0.83736.00610.88
TOTAL
14,064.41
Add 1 % Water charges on “W”
140.64
TOTAL
14,205.05
Add GST on “X” (multiplying factor 0.2127)
3,021.41
TOTAL
17,226.46
Add 15% CPOH on “Y”
2,583.97
TOTAL
19,810.43
Add Cess @ 1% on “Z”
198.10
Cost for 17.37 m pipe
20,008.53
Cost per metre
1,151.90
Say
1,151.90

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1328. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works