Skip to main content

CPWD Analysis of Rates · Roofing

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes

75 mm diameter

Item number
12.41.1
Analysis basis
Details of cost for 6.00 metres
Priced inputs
8
Derived rate
248.80 / metre

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 12.41.1 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter — is derived from 8 priced inputs for 6.00 metres and works out to ₹248.80 per metre after water charges, GST, CPOH and cess. The full build-up is below.

CodeInputUnitQuantityRate (INR)Amount (INR)
7188U-PVC pipes (working pressure 4 kg / sqcm.) Single socketed pipe 75 mm diaU-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm diaMaterialmetre674.00444.00
7190U-PVC pipes (working pressure 4 kg /sqcm.) Rubber (Seal) Ring 75 mm diaU-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 75 mm diaMaterialeach19.009.00
9977Carriage of materialsMaterialL.S.13.522.2730.69
9999Adhesive, and sundries etc.MaterialL.S.6.762.2715.35
0116Fitter (grade 1)Labourday0.19897.00170.43
0114BeldarLabourday0.37736.00272.32
0100BandhaniLabourday0.08816.0065.28
9999Scaffolding etc.MaterialL.S.18.592.2742.20
TOTAL
1,049.27
Add 1 % Water charges on “W”
10.49
TOTAL
1,059.76
Add GST on “X” (multiplying factor 0.2127)
225.41
TOTAL
1,285.17
Add 15% CPOH on “Y”
192.78
TOTAL
1,477.95
Add Cess @ 1% on “Z”
14.78
Cost of 6.00 metre
1,492.73
Cost of 1.00 metre
248.79
Say
248.80

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 897. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works