CPWD Analysis of Rates · Roofing
Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete
S type louvers
- Item number
- 12.13.8
- Analysis basis
- Details of cost for 8.74 metres
- Priced inputs
- 11
- Derived rate
- ₹560.05 / metre
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 12.13.8 — Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: S type louvers — is derived from 11 priced inputs for 8.74 metres and works out to ₹560.05 per metre after water charges, GST, CPOH and cess. The full build-up is below.
- S type louvers = 5 nos.+
- Total = 5.25 nos.
- Add 5% wastage = 0.25 nos.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 0235 | Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement S type louversMaterial | each | 5.25 | 280.00 | 1,470.00 |
| 9977 | CarriageMaterial | L.S. | 10.79 | 2.27 | 24.49 |
| 1031 | Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with4 galvanised steel nutsGalvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanised steel nutsMaterial | each | 6 | 20.00 | 120.00 |
| 1032 | Galvanised steel bolts 10 mm dia and 7 cm long with nutsMaterial | each | 6 | 6.00 | 36.00 |
| 1208 | Bitumen washerMaterial | 100 Nos | 0.18 | 30.00 | 5.40 |
| 1210 | G.I. plain washer thinMaterial | 100 Nos | 0.36 | 21.00 | 7.56 |
| 9977 | Carriage of bolts and nuts and washersMaterial | L.S. | 2.73 | 2.27 | 6.20 |
| 9999 | SundriesMaterial | L.S. | 13.39 | 2.27 | 30.40 |
| 0111 | Carpenter 1st classLabour | day | 1 | 897.00 | 897.00 |
| 0114 | BeldarLabour | day | 1 | 736.00 | 736.00 |
| 0102 | Blacksmith 1st classLabour | day | 0.12 | 897.00 | 107.64 |
- TOTAL
- 3,440.69
- Add 1 % Water charges on “W”
- 34.41
- TOTAL
- 3,475.10
- Add GST on “X” (multiplying factor 0.2127)
- 739.15
- TOTAL
- 4,214.25
- Add 15% CPOH on “Y”
- 632.14
- TOTAL
- 4,846.39
- Add Cess @ 1% on “Z”
- 48.46
- Cost of 8.74 metres
- 4,894.85
- Cost of 1.00 metre
- 560.05
- Say
- 560.05
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 872. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works