Skip to main content

CPWD Analysis of Rates · Road Work

Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1 lime: 2 fly ash: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), including finishing with 10mm thick cement mortar 1:3 (1 cement : 3 coarse sand) in foot paths, including preparation of sub grade with a hand rammer, laying 10 mm thick leveling course of fine sand (jamuna sand) and filling the joints with fine sand

Item number
16.52
Analysis basis
Details of cost for a path of area
Priced inputs
16
Derived rate
13,719.05 / a path

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 16.52 Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1 lime: 2 fly ash: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), including finishing with 10mm thick cement mortar 1:3 (1 cement : 3 coarse sand) in foot paths, including preparation of sub grade with a hand rammer, laying 10 mm thick leveling course of fine sand (jamuna sand) and filling the joints with fine sand — is derived from 16 priced inputs for a path and works out to ₹13,719.05 per a path after water charges, GST, CPOH and cess. The full build-up is below.

  • 100sqm/9cum.
  • No. of blocks required for 100sqm. = 1080
  • nos.
  • (a) Concrete in blocks
  • (1080x0.30x0.30x0.09 = 8.75 cum.)
  • (b) Labour for surface excavation :
  • (c) For levelling course of fine sand
  • (d) For finishing with 10mm thick cement
  • plaster
  • cement plaster with cement mortar 1:3(1
  • Cement: 3 Coarse sand)
  • qty. for 97.2sqm. = 0.972 cum
  • (e) For laying blocks and filling joints with
  • Jamuna sand for filling joints 5mm (av.) thick
CodeInputUnitQuantityRate (INR)Amount (INR)
Rate as per sub analysis Item Number 16.52Y of SH:Road WorkRate as per item 16.52YSub-analysiscum8.753,744.6032,765.25
0114BeldarLabourday7.2736.005,299.20
0115CoolieLabourday6736.004,416.00
6501Sand zone V (Jamuna)Materialcum11,320.001,320.00
0114BeldarLabourday0.089736.0065.50
0115CoolieLabourday0.107736.0078.75
0101BhistiLabourday0.035816.0028.56
Rate as per Item Number 3.8 of SH: MortarsRate as per item 3.8Sub-analysiscum0.9724,881.954,745.26
0155Mason (average)Labourday7.87857.006,744.59
0115CoolieLabourday7.87736.005,792.32
0101BhistiLabourday2.62816.002,137.92
9999Scaffolding and sundriesMaterialL.S.122.22.27277.39
6501Sand zone V (Jamuna)Materialcum0.051,320.0066.00
0123Mason 1st classMason 1st classLabourday9897.008,073.00
0115CoolieLabourday19.8736.0014,572.80
0101BhistiLabourday0.5816.00408.00
TOTAL
86,790.54
Add 1 % Water charges on “W”
867.91
TOTAL
87,658.45
Add GST on “X” (multiplying factor 0.2127)
18,644.95
TOTAL
1,06,303.40
Add 15% CPOH on “Y”
15,945.51
TOTAL
1,22,248.91
Add Cess @ 1% on “Z”
1,222.49
Cost for 9 cum.
1,23,471.40
Rate per cum.
13,719.04
Say
13,719.05

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1217. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works