CPWD Analysis of Rates · Road Work
Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded microprismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retroreflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge
- Item number
- 16.50
- Analysis basis
- Details of cost for 15 Nos.
- Priced inputs
- 5
- Derived rate
- ₹206.30 / Nos
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 16.50 — Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded microprismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retroreflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge — is derived from 5 priced inputs for 15 Nos and works out to ₹206.30 each after water charges, GST, CPOH and cess. The full build-up is below.
- (including material required for fixing cats
- eyes and providing barricading to divert
- traffic)
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 7426 | Cat’s eyeMaterial | each | 15 | 87.00 | 1,305.00 |
| 9977 | Carriage of cats eyesMaterial | L.S. | 2.6 | 2.27 | 5.90 |
| 0124 | Mason 2nd classMason 2nd classLabour | day | 0.5 | 816.00 | 408.00 |
| 0114 | BeldarLabour | day | 0.5 | 736.00 | 368.00 |
| 9999 | SundriesMaterial | L.S. | 39 | 2.27 | 88.53 |
- TOTAL
- 2,175.43
- Add 1 % Water charges on “W”
- 21.75
- TOTAL
- 2,197.18
- Add GST on “X” (multiplying factor 0.2127)
- 467.34
- TOTAL
- 2,664.52
- Add 15% CPOH on “Y”
- 399.68
- TOTAL
- 3,064.20
- Add Cess @ 1% on “Z”
- 30.64
- Cost for 15 Nos.
- 3,094.84
- Cost for one cat’s eye.
- 206.32
- Say
- 206.30
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1216. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works