Skip to main content

CPWD Analysis of Rates · Reinforced Cement Concrete

Providing and fixing parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement bars and related operations as required to complete the works per direction of Engineerin-Charge

Coupler for 16 mm diameter reinforcement bar

Item number
5.42.1
Analysis basis
Detail of cost for 1 Nos
Priced inputs
3
Derived rate
115.10 / no

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 5.42.1 Providing and fixing parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement bars and related operations as required to complete the works per direction of Engineerin-Charge Coupler for 16 mm diameter reinforcement bar — is derived from 3 priced inputs for 1 Nos and works out to ₹115.10 per no after water charges, GST, CPOH and cess. The full build-up is below.

CodeInputUnitQuantityRate (INR)Amount (INR)
2394Coupler 16 mm diaMaterialeach132.0032.00
9999For placing in position and fixingMaterialL.S.3.772.278.56
9999Tapard/Parallel threading chargesMaterialL.S.17.772.2740.34
TOTAL
80.90
Add 1 % Water charges on “W”
0.81
TOTAL
81.71
Add GST on “X” (multiplying factor 0.2127)
17.38
TOTAL
99.09
Add 15% CPOH on “Y”
14.86
TOTAL
113.95
Add Cess @ 1% on “Z”
1.14
Cost of 1 no
115.09
Say
115.10

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 287. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works